Anna Carla Araujo

Professeur - Institut National des Sciences Appliquées de Toulouse (INSA de Toulouse)
Membre du groupe Surfaces, Usinages, Matériaux et Outillages (SUMO)
BR2-0013, Espace Clément Ader, 3 rue Caroline Aigle
31400 Toulouse
 
    (recherche)
    (enseignement)
Activités de recherche :

The area of research focuses on manufacturing processes, especially in the process of machining (metal cutting) and, recently, additive manufacturing. The mechanical behavior of the machining and micro-cutting cutting tool is modeled and experimental monitoring of cutting forces, wear, tool life, machinability and other process factors is performed. The workpiece materials of interest are: aerospace and petroleum industry materials and biocompatible materials for medical implants (Titanium, Aluminum, Chrome-Cobalt alloys and aeronautic composites).

CV Lattes: http://lattes.cnpq.br/4198469560134761



Activités d'enseignement :

She taught the following disciplines in undergraduate and graduate courses: manufacturing processes, machining (theory and practice), additive manufacturing and design of experiments (DOE).

Her academic education took place in the Mechanical Engineering of UFRJ (Graduation, Master and Doctorate) with doctorate Sandwich at UIUC (University of Illinois at Urbana Champaign).

She worked for three years in the steel industry managing the small team of manufacturing, assembly and installation of continuous casting flow equipment in Brazilian and South American companies of the steel industry after the doctorate and before rejoining the academic life.

Before coming to France, she was a Professor at the Department of Mechanical Engineering at CEFET/RJ (2006-2010) and at UFRJ (2010-2019). At UFRJ she was director of International Relations at the Polytechnic School (2014-2017) and she also worked leading the Brafitec Project with Paristech Schools. She held a postdoctoral position for one year (2017-2018) at ENSAM Paristech in the LaBoMaP laboratory integrated in the Saint Jean Industries industry in Cluny, France.



Production scientifique :
104 contributions trouvées

AnnéeTypeAuteurs et titre du documentLiens
2023 ACL Marcos Vicente Moreira, Yann Landon, Anna-Carla Araujo. A Timed Automaton Model with Timing Intervals and Outputs for Fault Diagnosis of the Drilling Process on a CNC Machine Journal of Control, Automation and Electrical Systems, Springer [HAL] / [BIB] / [DOI]
2023 COM Sughosh Deshpande, Abdallah Bouzid, Pierre Lagarrigue, Yann Landon, Anna Carla Araujo. Data maps for material identification in helical milling by spindle power monitoring 19th CIRP Conference on Modeling of Machining Operations Germany CIRP CMMO 2023, Karlsruhe, DE [HAL] / [BIB]
2023 COM Sughosh Deshpande, Abdallah Bouzid, Pierre Lagarrigue, Yann Landon, Anna Carla Araujo. Material identification in helical milling for smart drilling applications Brazilian Manufacturing Engineering Congress 12th COBEF 2023, Brasilia, BR [HAL] / [BIB]
2023 COM Raafat Hussein, Yann Landon, Anna Carla Araujo. Bone properties A Review for Drilling Application COBEF2023, brasilia, BR [HAL] / [BIB]
2023 COM Adones Almeida Rocha, Rossana Mara da Silva Thiré, Anna Carla Araujo. Generating STL for forming trabecular bone structure in additive manufacturing using cell dynamics modeling ESAFORM 2023, Kracov, PL [HAL] / [BIB]
2023 COM Anna Carla Araujo, Rossana Mara da Silva Moreira Thiré, Damien Coutouly, Anas Rais, Léo Sudriès, Tom Gaboriaud, Giovanna Siqueira Sardela Andrade, Raphael Értola Pereira de Deus Santos, Vitor Amadeu Corrêa. COLLABORATIVE PROJECT AS A DIDACTIC PLATFORM OF VIRTUAL MOBILITY FOR ADDITIVE MANUFACTURING COURSE Congresso Brasileiro de Engenharia da Fabricação - COBEF, Brasilia, BR [HAL] / [BIB]
2022 COM M Moreira, Anna Carla Araujo, Yann Landon. abstract k, Fortaleza, BR [HAL] / [BIB]
2022 ACL Sughosh Deshpande, Pierre Lagarrigue, Yann Landon, Anna Carla Araujo. Experimental Analysis of Circular Milling for Material Identification in Aerospace Industry Key Engineering Materials, Trans Tech Publications, 926, p.1650-1659 [HAL] / [BIB] / [DOI]
2022 HDR Anna Carla Araujo. Research perspectives for smart machining based on instantaneous cutting forces in milling and micromilling [HAL] / [BIB]
2022 ACL Sughosh Deshpande, Maria Clara Coimbra Gonçalves, Anna Carla Araujo, Pierre Lagarrigue, Yann Landon. Specific force map for smart machining applications with rotating tools Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture, SAGE Publications [HAL] / [BIB] / [DOI]
2022 COM Sughosh Deshpande, Anna Carla Araujo, Pierre Lagarrigue, Yann Landon. EXPERIMENTAL ANALYSIS OF CIRCULAR MILLING FOR MATERIAL IDENTIFICATION IN AEROSPACE INDUSTRY ESAFORM 2022, Braga, PT [HAL] / [BIB] / [DOI]
2021 COM Anna Carla Araujo, Marcos Vicente Moreira, Yann Landon. Fault diagnosis of CNC machine-tools for drilling Titanium alloy 15th Conference on Intelligent Computation in Manufacturing Engineering, "Innovative and Cognitive Production Technology and Systems", Naples, IT [HAL] / [BIB]
2021 COM Anna Carla Araujo, Maria Clara Coimbra Gonçalves, Gilmar Ferreira Batalha, Yann Landon. SMART DRILLING: MATERIAL IDENTIFICATION USING SPECIFIC FORCE MAP 11º Congresso Brasileiro de Engenharia de Fabricação, Curitiba, BR [HAL] / [BIB]
2021 COM Anna Carla Araujo, Julio Cesar Valente Ferreira. THE MISSION OF EDUCATORS IN MACHINING IN REDUCING GENDER INEQUALITY WITH THE INDUSTRY 4.0. A MISSÃO DAS DOCENTES EM USINAGEM NA REDUÇÃO DA DESIGUALDADE DE GÊNERO COM A INDÚSTRIA 4.0 11º Congresso Brasileiro de Engenharia de Fabricação, Curitiba, BR [HAL] / [BIB]
2021 ACL Anna Carla Araujo, Yann Landon, Pierre Lagarrigue. Smart drilling for Aerospace Industry: state of art in research and education Procedia CIRP, ELSEVIER, 99, p.387-391 [HAL] / [BIB] / [DOI]
2020 ACL Fábio de Oliveira Campos, Anna Carla Araujo, André Luiz Jardini Munhoz, Shiv Gopal Kapoor. The influence of additive manufacturing on the micromilling machinability of Ti6Al4V: A comparison of SLM and commercial workpieces Journal of Manufacturing Processes, Society of Manufacturing Engineers, 60, p.299-307 [HAL] / [BIB] / [DOI]
2020 ACL Anna Carla Araujo, Guillaume Fromentin, Patrick Blandenet. Investigation on PCD cutting edge geometry for Ti6Al4V high-feed milling International Journal of Advanced Manufacturing Technology, Springer Verlag, 111, p.1785 - 1796 [HAL] / [BIB] / [DOI]
2020 O Anna Carla Araujo, Fábio de Oliveira Campos, Adriane Lopes Mougo. Usinagem para Engenharia: Um curso de mecânica do corte [HAL] / [BIB]
2020 COM Anna Carla Araujo, Yann Landon, Pierre Lagarrigue. Smart drilling for Aerospace Industry: state of art in research and education 14th CIRP Conference on Intelligent Computation in Manufacturing Engineering, CIRP ICME ˈ20, Naples, IT [HAL] / [BIB]
2019 COM Rodrigo Oliveira Henz, Fábio de Oliveira Campos, Anna Carla Araujo, Guillaume Fromentin. CUTTING FORCES IN HIGH FEED MILLING 25 International Conference for Mechanical Engineering, Uberlândia, BR [HAL] / [BIB]
2019 ACL Arthur Wilson Fonseca Coelho, Rossana Mara da Silva Moreira Thiré, Anna Carla Araujo. Manufacturing of gypsum–sisal fiber composites using binder jetting Additive Manufacturing, Elsevier, 29, p.100789 [HAL] / [BIB] / [DOI]
2019 ACL Fábio de Oliveira Campos, Anna Carla Araujo, Shiv Gopal Kapoor. Experimental Comparison of Micromilling Pure Titanium and Ti-6Al-4V Journal of Micro and Nano-Manufacturing, ASME, 7(2) [HAL] / [BIB] / [DOI]
2019 COM Matheus Coelho Cosenza, Marcos Valério Ribeiro, Anna Carla Araujo. Stability on turning of Inconel 718 using vibration-assisted machining DINAME 2019, Buzios, BR [HAL] / [BIB]
2019 COM Fábio de Oliveira Campos, Juan Garcia de Blás, Anna Carla Araujo. Micromilling of Equal Channel Angular Pressing Titanium 3rd World Congress on Micro Nano Manufacturing (WCMNM) - ICOMM 2019, Raleigh, US [HAL] / [BIB]
2018 ACL Arthur Wilson Fonseca Coelho, Rossana Mara da Silva Moreira Thiré, Anna Carla Araujo. Manufatura aditiva por estereolitografia: análise da geometria da peça e da influência da posição e orientação de fabricação. Additive manufacturing by stereolithography: analysis of the part geometry and influence of manufacturing position and orientation Matéria (Rio de Janeiro), 23 [HAL] / [BIB] / [DOI]
2018 COM Fábio Oliveira Campos, Anna Carla Araujo, Shiv Gopal Kapoor. Experimental Comparison of Micromilling Pure Titanium and Ti-6Al-4V WCMNM 2018, Slovenia, SI [HAL] / [BIB]
2018 ACL Adriane Lopes Mougo, Fabio de Oliveira Campos, Anna Carla Araujo. Mechanistic study on micromilling of the super duplex stainless steel UNS S32750 Journal of Manufacturing Processes, Society of Manufacturing Engineers, 34, p.31-39 [HAL] / [BIB] / [DOI]
2018 ACL Gleiton De Paula Oliveira, Maria Cindra Fonseca, Anna Carla Araujo. Residual stresses and cutting forces in cryogenic milling of Inconel 718 Procedia CIRP, ELSEVIER, 77, p.211-214 [HAL] / [BIB] / [DOI]
2018 ACL Anna Carla Araujo, Guillaume Fromentin. Investigation of tool deflection during milling of thread in Cr-Co dental implant. Science Arts & Métiers (SAM) International Journal of Advanced Manufacturing Technology, Springer Verlag, 99(1-4), p.531-541 [HAL] / [BIB] / [DOI]
2018 COM Bernardo Vieira Magaldi, Marianna de Oliveira da Costa, Rossana Mara da Silva Thiré, Anna Carla Araujo. COMPARISON OF THE POROSITY OF SCAFFOLDS MANUFACTURED BY TWO ADDITIVE MANUFACTURING TECHNOLOGIES: SLA AND FDM 24th International Congress of Mechanical Engineering, Curitiba, BR [HAL] / [BIB]
2017 ACL Gleiton de Paula Oliveira, Maria Cindra Fonseca, Anna Carla Araujo. Analysis of residual stress and cutting force in end milling of Inconel 718 using conventional flood cooling and minimum quantity lubrication International Journal of Advanced Manufacturing Technology, Springer Verlag, 92(9-12), p.3265-3272 [HAL] / [BIB] / [DOI]
2017 COM Anna Carla Araujo, Guillaume Fromentin. Modeling Thread Milling Forces in Mini-hole in Dental Metallic Materials 16th CIRP Conference on Modelling of Machining Operations, 58, p.623-628, Cluny, FR [HAL] / [BIB] / [DOI]
2017 ACL Cesar Giovanni Cabrera, Anna Carla Araujo, Daniel Alves Castello. On the wavelet analysis of cutting forces for chatter identification in milling Advances in Manufacturing, 5(2), p.130-142 [HAL] / [BIB] / [DOI]
2017 ACL Fábio de Oliveira Campos, Adriane Lopes Mougo, Anna Carla Araujo. Study of the cutting forces on micromilling of an aluminum alloy Journal of the Brazilian Society of Mechanical Sciences and Engineering, Springer Verlag, 39(4), p.1289-1296 [HAL] / [BIB] / [DOI]
2017 ACL Anna Carla Araujo, Guillaume Fromentin. Modeling Thread Milling Forces in Mini-hole in Dental Metallic Materials Procedia CIRP, ELSEVIER, 58, p.623-628 [HAL] / [BIB] / [DOI]
2017 COM Adriane Lopes Mougo, Anna Carla Araujo. INFLUÊNCIA DA RECUPERAÇÃO ELÁSTICA NA INTEGRIDADE DE SUPERFÍCIE DO AÇO SUPERDUPLEX *. Influence of elastic recovery on the surface integrity of superduplex steel 72 ABM Week, São Paulo, BR [HAL] / [BIB]
2017 COM Adriane Lopes Mougo, Fabio de Oliveira Campos, Anna Carla Araujo. DETERMINAÇÃO MECANÍSTICA DA PRESSÃO ESPECÍFICA DE CORTE NO MICRO FRESAMENTO DO AÇO SUPERDUPLEX 32750. Mechanistic determination of specific cutting pressure in micro milling of superduplex steel 32750 9º Congresso Brasileiro de Engenharia de Fabricação, Joinville, BR [HAL] / [BIB]
2017 COM Arthur Wilson Fonseca Coelho, Anna Carla Araujo, Rossana Mara Thiré. ANÁLISE DA CONTRAÇÃO NA ESTEREOLITOGRAFIA VARIANDO POSIÇÃO E ORIENTAÇÃO NA PLATAFORMA DE IMPRESSÃO. Contraction analysis in stereolithography varying position and orientation on the printing platform 9º Congresso Brasileiro de Engenharia de Fabricação, Joinville, BR [HAL] / [BIB]
2017 COM Fabio Campos de Oliveira, Anna Carla Araujo. AN EXPERIMENTAL COMPARISON REGARDING BURR FORMATION ON MICROMILLING OF TITANIUM ALLOY TI-6AL-4V USING DIFFERENT EXPERIMENTAL SETUPS 9º Congresso Brasileiro de Engenharia de Fabricação, Joinville, BR [HAL] / [BIB]
2017 COM Adriane Lopes Mougo, Fabio de Oliveira Campos, Anna Carla Araujo. MODELAGEM DAS FORÇAS DE CORTE NO MICROFRESAMENTO DO AÇO SUPERDUPLEX 32750 CONSIDERANDO A MICROESTRUTURA HETEROGÊNEA DO MATERIAL. Modeling cutting force in micromilling of superduplex stainless steel UNS S32750 considering heterogeneous microstructure 9º Congresso Brasileiro de Engenharia de Fabricação, Joinville, BR [HAL] / [BIB]
2016 ACL Z. Wang, V. Kovvuri, Anna Carla Araujo, M. Bacci, W.N.P. Hung, S.T.S. Bukkapatnam. Built-up-edge effects on surface deterioration in micromilling processes Journal of Manufacturing Processes, Society of Manufacturing Engineers, 24, p.321-327 [HAL] / [BIB] / [DOI]
2016 ACL Fábio de Oliveira Campos, Fernanda de Castro Monte Schroder, Anna Carla Araujo, Juan Garcia De Blas, Luiz Carlos Pereira. Cutting Forces and Mechanical Resistance of Pure Titanium Processed by Equal Channel Angular Pressing Procedia CIRP, ELSEVIER, 46, p.222-225 [HAL] / [BIB] / [DOI]
2016 COM Carolina Paiva Nascimento, Mateus Campos Martins, Juan Manuel Pardal, Sérgio Souto Maior Tavares, Anna Carla Araujo, Maria Cindra Fonseca. ESTUDO DAS TENSÕES RESIDUAIS, FORÇAS DE USINAGEM E QUALIDADE DE SUPERFÍCIE GERADAS NO FRESAMENTO DE AÇO MARAGING CLASSE 300. Study of residual stresses, machining forces and surface quality generated in milling of maraging steel IX Congresso Nacional de Engenharia Mecânica, Fortaleza, BR [HAL] / [BIB]
2015 COM V. Kovvuri, Z. Wang, Anna Carla Araujo, M. da Silva, S. Bukkapatnam, W. Hung. Built-Up-Edge Formation in Micromilling ASME 2015 International Mechanical Engineering Congress and Exposition, Houston, US [HAL] / [BIB] / [DOI]
2015 ACL Anna Carla Araujo, Gabriel Mendes Mello, Francirlei Gripa Cardoso. Thread milling as a manufacturing process for API threaded connection: Geometrical and cutting force analysis Journal of Manufacturing Processes, Society of Manufacturing Engineers, 18, p.75-83 [HAL] / [BIB] / [DOI]
2015 COM Adriane Lopes Mougo, Fábio de Oliveira Campos, Vanessa Pinheiro, Anna Carla Araujo. ANÁLISE DAS FORÇAS DE CORTE E DA INTEGRIDADE SUPERFICIAL NO MICROFRESAMENTO DO AÇO SUPERDUPLEX 32750. Analysis of Forces and Surface Integrity in Micromilling of Super Duplex Steel 32750 8º Congresso Brasileiro de Engenharia de Fabricação, Salvador, BR [HAL] / [BIB]
2015 COM Rodrigo Marques Rios, Vladimir Calixto, José Paulo Vogel, Anna Carla Araujo. ANÁLISE EXPERIMENTAL DA FORÇA DE AVANÇO NO PROCESSO DE FURAÇÃO DE LIGA INCONEL 718. Advance Force Analysis During the Drilling Process of the INCONEL 718 Nickel Alloy 8º Congresso Brasileiro de Engenharia de Fabricação, Salvador, BR [HAL] / [BIB]
2015 COM Giovanni Arevalo Cabrera, Anna Carla Araujo, Daniel Alves Castello. DETECÇÃO DE VIBRAÇÕES NO PROCESSO DE FRESAMENTO DE TOPO APLICANDO A TRANSFORMADA WAVELET A SINAIS DE FORÇA DE USINAGEM. Vibration Detection in the End Milling Process Applying the Wavelet Transform to Machining Force Signals 8º Congresso Brasileiro de Engenharia de Fabricação, Salvador, BR [HAL] / [BIB]
2015 COM Gleiton de Paula Oliveira, Maria Cindra Fonseca, Anna Carla Araujo. EFFECTS OF CUTTING SPEED IN FORCES, SURFACE TOPOGRAPHY AND RESIDUAL STRESSES IN MILLING OF INCONEL 718 23rd International Congress of Mechanical Engineering (COBEM 2015), Rio de Janeiro, BR [HAL] / [BIB]
2015 ACL Adriane Lopes Mougo, Fábio de Oliveira Campos, Anna Carla Araujo. Estudo da Influência da Largura de Corte no MicroFresamento de uma Liga de Alumínio Study of the Influence of the radial depht of cut in the Micro-milling of an Aluminum Alloy Máquinas e Metais, Aranda Editora, 598, p.50 - 62 [HAL] / [BIB]
2015 COM Vanessa Pinheiro, Adriane Lopes Mougo, Anna Carla Araujo. A STUDY OF SPECIFIC CUTTING FORCE IN MICROMILLING OF SUPERDUPLEX STAINLESS STEEL UNS S 32750 23rd International Congress of Mechanical Engineering (COBEM 2015), Rio de Janeiro, BR [HAL] / [BIB]
2015 COM Adriane Lopes Mougo, Fabio Oliveira Campos, Anna Carla Araujo. Size Effect on the Micromilling of the Super Duplex Stainless Steel International Conference on Micro Manufacturing - 4M/ICOMM2015, Milano, IT [HAL] / [BIB]
2014 COM Gabriel Bezerra Menezes Silva, Ritto Thiago, Anna Carla Araujo. OTIMIZAÇÃO DE PARÂMETROS DE CORTE A PARTIR DE ABORDAGEM ESTOCÁSTICA APLICADA A DINÂMICA DO FRESAMENTO DE TOPO. OPTIMIZATION OF CUTTING PARAMETERS FROM A STOCHASTIC APPROACH APPLIED TO THE END MILLING DYNAMICS VIII Congresso Nacional de Engenharia Mecânica, Uberlandia, BR [HAL] / [BIB]
2014 COM Anna Carla Araujo, Adriane Lopes Mougo, Fábio Oliveira Campos. Experimental Analysis of Micromilling Cutting Forces on Super Duplex Stainless Steel ICOMM 2014 No International Conference on Micro Manufacturing ICOMM 2014, Singapour, SG [HAL] / [BIB]
2014 COM Sandro Pimentel Mirres, Anna Carla Araujo, Ricardo Alexandre Amar Aguiar. ANÁLISE DE DIFERENTES SINAIS EXPERIMENTAIS DURANTE CHATTER NO FRESAMENTO DE TOPO. ANALYSIS OF DIFFERENT EXPERIMENTAL DATA DURING CHATTER IN END MILLING OPERATION VIII Congresso Nacional de Engenharia Mecânica, Uberlandia, BR [HAL] / [BIB]
2014 ACL Anna Carla Araujo, Washington Nery, José Paulo Vogel. Avaliação Experimental do processo parametrizado por otimização computacional. Experimental evaluation of the parameterized process by computational optimization Máquinas e Metais, Aranda Editora, 584(60-70) [HAL] / [BIB]
2014 ACL Anna Carla Araujo, Francirlei Gripa Cardoso. Análise de Forças no Fresamento de Roscas API. Thread Milling Force Analysis in API Geometry Máquinas e Metais, Aranda Editora, 582, p.18-31 [HAL] / [BIB]
2014 COM Anna Carla Araujo, Adriane Lopes Mougo, Fábio de Oliveira Campos. INFLUENCE OF MICROMILLING ON THE SURFACE INTEGRITY OF SUPER DUPLEX STAINLESS STEEL* 69° Congresso Anual da ABM, São Paulo, BR [HAL] / [BIB]
2014 COM Lucy Vidinha Martins, Francisco Fernando Roberto Pereira, Carlos José De Araujo, Anna Carla Araujo. FRESAMENTO DE ROSCAS DE NIQUEL-TITÂNIO PARA FABRICAÇÃO DE CORPOS DE PROVA DE TRAÇÃO XXI Congresso Nacional de Estudantes de Engenharia Mecânica, Rio de Janeiro, BR [HAL] / [BIB]
2014 O Anna Carla Araujo, Mikell Groover. Coordination et Traduction de "Introdução aos Processos de Fabricação [HAL] / [BIB]
2014 COM Anna Carla Araujo, Víctor Vizquerra-Rojo, Marcelo Amorim Savi. MODELOS DE DINÂMICA NÃO LINEAR PARA USINAGEM. NONLINEAR DYNAMIC MODELS FOR MACHINING VIII Congresso Nacional de Engenharia Mecânica, Uberlandia, BR [HAL] / [BIB]
2013 COM Anna Carla Araujo, Adriane Lopes Mougo, Fabio Oliveira Campos. A STUDY OF THE INFLUENCE OF THE WIDTH OF CUT ON MICRO MILLING ALUMINUM ALLOY 22nd International Congress of Mechanical Engineering (COBEM 2013), Ribeirão Preto, BR [HAL] / [BIB]
2013 COM Gabriel Bezerra de Menezes, Anna Carla Araujo. COMPUTATIONAL ALGORITHM BASED ON ALTINTAS MODEL FOR CUTTING DYNAMICS OF END MILLING PROCESS 22nd International Congress of Mechanical Engineering (COBEM 2013), Ribeirão Preto, BR [HAL] / [BIB]
2013 ACL Anna Carla Araujo, Marcelo Savi, Pedro Manuel Calas Lopes Pacheco. Dynamics of 2-DOF Micro-End-Milling System Considering Grain-Size Variation Materials Science Forum, Trans Tech Publications Inc., 758, p.165-173 [HAL] / [BIB] / [DOI]
2013 ACL Francisco Valdenor Pereira da Silva, José Paulo Vogel, Rodinei Medeiros Gomes, Tadeu Antonio de Azevedo Melo, Anna Carla Araujo, Silvio DE BARROS. Effect of the Cutting Velocity and Heat Treatment on Turning Cutting Forces of an SMA Cu-Al-Be Alloys Materials Science Forum, Trans Tech Publications Inc., 758, p.157-164 [HAL] / [BIB] / [DOI]
2013 COM Washington Souza, José Paulo Vogel, Jean Eduardo Ferreira de Oliveira, Anna Carla Araujo. AVALIAÇÃO EXPERIMENTAL DE UM TORNEAMENTO CILÍNDRICO EXTERNO PARAMETRIZADO POR OTIMIZAÇÃO COMPUTACIONAL 7º CONGRESSO BRASILEIRO DE ENGENHARIA DE FABRICAÇÃO, Itatiaia, BR [HAL] / [BIB]
2013 COM Francirlei Gripa Cardoso, Anna Carla Araujo. ANALISE DE FORÇAS NO FRESAMENTO DE ROSCAS API 7º CONGRESSO BRASILEIRO DE ENGENHARIA DE FABRICAÇÃO, Itatiaia, BR [HAL] / [BIB]
2013 COM Anna Carla Araujo, José Paulo Vogel, Washington Souza. ESTUDO DO EFEITO DO AVANÇO NAS FORÇAS E NO ACABAMENTO DE UM TORNEAMENTO DE AÇO SUPERDUPLEX 7º CONGRESSO BRASILEIRO DE ENGENHARIA DE FABRICAÇÃO, Itatiaia, BR [HAL] / [BIB]
2013 ACL Anna Carla Araujo, Guillaume Fromentin, Gérard Poulachon. Analytical and experimental investigations on thread milling forces in titanium alloy International Journal of Machine Tools and Manufacture, Elsevier, 67, p.28-34 [HAL] / [BIB] / [DOI]
2013 COM Anna Carla Araujo, Adriane Lopes Mougo, Fabio de Oliveira. Micro milling cutting forces on machining aluminium alloy ICOMM 2013, Victoria, CA [HAL] / [BIB]
2013 COM Fábio Oliveira Campos, Adriane Lopes Mougo, Anna Carla Araujo. MODELING MICROMILLING CUTTING FORCE ON MACHINING ALUMINUM ALLOY 22nd International Congress of Mechanical Engineering (COBEM 2013), Ribeirão Preto, BR [HAL] / [BIB]
2013 COM Francisco Valdenor Pereira da Silva, José Paulo Vogel, Rodinei Medeiros Gomes, Tadeu Antonio de Azevedo Melo, Anna Carla Araujo, Silvio DE BARROS. EXPERIMENTAL INVESTIGATION OF CUTTING FORCES GENERATED DURING TURNING OF QUENCHED AND UNQUENCHED CU-AL-BE ALLOYS 22nd International Congress of Mechanical Engineering (COBEM 2013), Ribeirão Preto, BR [HAL] / [BIB]
2012 COM Daniel Oliveira de Lima, Anna Carla Araujo, Jose Luis Lopes Silveira. INFLUÊNCIA DA PROFUNDIDADE DE CORTE E DO AVANÇO NA FORÇA DE CORTE NO FRESAMENTO DE FACEAMENTO VII Congresso Nacional de Engenharia Mecânica, São Luis, BR [HAL] / [BIB]
2012 COM Anna Carla Araujo, Francirlei Gripa Cardoso, Guilherme Dornelles, Guillaume Fromentin. EFEITOS DE PARÂMETROS DE CORTE NAS FORÇAS DE USINAGEM EM FRESAMENTO INTERNO DE ROSCAS VII Congresso Nacional de Engenharia Mecânica, São Luis, BR [HAL] / [BIB]
2012 ACL J. Santos, L. Rebêlo, Anna Carla Araujo, E. Barros, J. de Sousa. Thickness-corrected model for nanoindentation of thin films with conical indenters Soft Matter, Royal Society of Chemistry, 8(16), p.4441 [HAL] / [BIB] / [DOI]
2012 COM Washington Souza, José Eduardo Ferreira De Oliveira, Anna Carla Araujo. AVALIAÇÃO EXPERIMENTAL DE UM TORNEAMENTO CILÍNDRICO EXTERNO PARAMETRIZADO POR OTIMIZAÇÃO COMPUTACIONAL VII Congresso Nacional de Engenharia Mecânica, São Luis, BR [HAL] / [BIB]
2012 ACL Mariana N Vasconcellos, Anna Carla Araujo. Analysis of cutting forces in the drilling process of an austenitic stainless steel alloy Máquinas e Metais, Aranda Editora, 559, p.12-20 [HAL] / [BIB]
2011 COM Fabio Vinícius Castilho, Mariana Pimenta Braga Braga, Anna Carla Araujo, Pedro Manuel Lopes Calas Pacheco. EXPERIMENTAL AND NUMERICAL ANALYSIS OF END MILLING TOOLS DYNAMIC PARAMETERS 21st Brazilian Congress of Mechanical Engineering, Natal, BR [HAL] / [BIB]
2011 COM Mariana N Vasconcellos, Anna Carla Araujo. ANÁLISE DAS FORÇAS DE CORTE NO PROCESSO DE FURAÇÃO DE UMA LIGA DE AÇO INOXIDÁVEL AUSTENÍTICO VI Congresso Brasileiro de Fabricação, Caxias do Sul, BR [HAL] / [BIB]
2011 COM Paula Dias Souza, Fabio Campos de Oliveira, Anna Carla Araujo. EXTERNAL THREAD MILLING ON BOVINE CORTICAL BONE VII Congresso Nacional de Engenharia Mecânica, São Luis, BR [HAL] / [BIB]
2010 ACL Martin Jun, Anna Carla Araujo. Modeling of the Thread Milling Operation in a Combined Thread/Drilling Operation: Thrilling Journal of Manufacturing Science and Engineering, American Society of Mechanical Engineers, 132(1) [HAL] / [BIB] / [DOI]
2010 COM Maria P Cindra Fonseca, Juan Manuel Pardal, Tatiane de Campos Chuvas, Wallace Palmeira dos Reis, Anna Carla Araujo. COMPORTAMENTO DAS TENSÕES RESIDUAIS GERADAS NO TORNEAMENTO DE UM AÇO AISI H13 VI CONGRESSO NACIONAL DE ENGENHARIA MECÂNICA, Campina Grande, BR [HAL] / [BIB]
2010 ACL Anna Carla Araujo, Maria Cindra Fonseca, Mariana Barbosa, Altino Marques Jr, Juan Manuel Pardal, Ricardo Bartholo. Tensões Residuais no Fresamento de Amostras de Aço Superduplex Residual Stresses in Milling Superduplex Steel Samples Máquinas e Metais, Aranda Editora, 535, p.46 - 61 [HAL] / [BIB]
2010 COM Guillaume Fromentin, Gérard Poulachon, Yann Paire, Anna Carla Araujo. MODELISATION GEOMETRIQUE DU FRAISAGE: APPLICATION AU FILETAGE A LA FRAISE Intercut 2010, Cluny, FR [HAL] / [BIB]
2010 COM Anna Carla Araujo, Jose Luis Lopes Silveira. A MODEL FOR MICRO THREAD MILLING OPERATION (MTMO) The Canadian Society for Mechanical Engineering Forum 2010, Victoria, CA [HAL] / [BIB]
2010 COM Anna Carla Araujo, Marcelo Amorim Savi, Pedro Manuel Lopes Calas Pacheco. EXPERIMENTAL AND NUMERICAL DYNAMICAL ANALYSIS OF AN END MILLING PROCESS VI CONGRESSO NACIONAL DE ENGENHARIA MECÂNICA, Campina Grande, BR [HAL] / [BIB]
2009 ACL Anna Carla Araujo, José Luis Lopes Silveira. Acoustic Emission used in modeling end milling. Emissão Acústica usada na modelagem do fresamento de topo Máquinas e Metais, Aranda Editora, 519(p.36 - 51) [HAL] / [BIB]
2009 COM Anna Carla Araujo, M B G Jun. THE SPECIFIC CUTTING ENERGY ON THE CUTTING EDGES OF A THE COMBINED DRILLING/THREAD MILLING PROCESS: THRILLING 12th CIRP Conference on Modelling of Machining Operations, San Sebastian, ES [HAL] / [BIB]
2009 COM Anna Carla Araujo, Pedro Manuel Lopes Calas Pacheco, Marcelo Amorim Savi. DYNAMICAL ANALYSIS OF AN END MILLING PROCESS 20th International Congress of Mechanical Engineering, Gramado, BR [HAL] / [BIB]
2009 COM Thiago de Freitas Pinto, Anna Carla Araujo, Carlos Frederico Trotta Matt. ANALYTICAL, NUMERICAL AND EXPERIMENTAL INVESTIGATION OF THE DYNAMIC BEHAVIOR OF A PROTOTYPE FOR A STOCKBRIDGE DAMPER 20th International Congress of Mechanical Engineering, Gramado, BR [HAL] / [BIB]
2008 COM Martin B G Jun, Anna Carla Araujo. MODELING AND ANALYSIS OF THE THREAD MILLING OPERATION IN THE COMBINED DRILLING/THREAD MILLING PROCESS 2008 International Manufacturing Science and Engineering Conference MSEC2008, Evanston, Illinois, US [HAL] / [BIB]
2008 COM Maria Cindra Fonseca, Marcelo F M Barbosa, Rafael N Bartholo, Altino Marques Jr, Juan Manuel Pardal, Anna Carla Araujo. ESTUDO DAS TENSÕES RESIDUAIS GERADAS NA USINAGEM POR FRESAMENTO DE AMOSTRAS DE AÇO SUPERDUPLEX V CONGRESSO NACIONAL DE ENGENHARIA MECÂNICA, Salvador, BR [HAL] / [BIB]
2007 COM Anna Carla Araujo, M B G Jun, S G Kapoor, R E Devor. Experimental Investigation of a Combined Drilling and Thread Milling Process: Thrilling Thirty-Fifth North American Manufacturing Research Conference - NAMRC 35, Ann Harbor - Michigan, US [HAL] / [BIB]
2007 ACL Etienne Beirão Friedrich, Lilian Martins da Motta Dias, Anna Carla Araujo. Study on the performance of coated tools in turning cast iron. Estudo sobre o desempenho de ferramentas revestidas no torneamento de ferro fundido Revista Gestão & Tecnologia, p.66-74 [HAL] / [BIB]
2007 COM Anna Carla Araujo, Marcelo Savi. NONLINEAR DYNAMICS OF MILLING PROCESS X Encontro de Modelagem Computacional, Nova Friburgo, BR [HAL] / [BIB]
2007 COM Anna Carla Araujo, José Luis Lopes Silveira. APPLICATION OF ACOUSTIC EMISSION ON END MILLING MODELLING IV Congresso Brasileiro de Fabricação, Águas de São Pedro, BR [HAL] / [BIB]
2006 ACL Anna Carla Araujo, Jose Luis Silveira, Martin B.G. Jun, Shiv Kapoor, Richard Devor. A model for thread milling cutting forces International Journal of Machine Tools and Manufacture, Elsevier, 46(15), p.2057-2065 [HAL] / [BIB] / [DOI]
2006 COM Anna Carla Araujo, Jose Luis Silveira. THRILLING: AN APPLICATION OF THREAD MILLING PROCESS IV Congresso Nacional de Engenharia Mecânica, Recife, BR [HAL] / [BIB]
2004 ACL Anna Carla Araujo, J Silveira, S Kapoor. Force prediction in thread milling Journal of the Brazilian Society of Mechanical Sciences and Engineering, Springer Verlag, 26(1) [HAL] / [BIB] / [DOI]
2003 COM Anna Carla Araujo, Jose Luis Silveira, Shiv Gopal Kapoor. FORCE PREDICTION IN THREAD MILLING 2 Congresso Brasileiro de Fabricação COBEF, Uberlandia, BR [HAL] / [BIB]
2003 COM Anna Carla Araujo, Ricardo Rodrigues Alvarez, José Luís Silveira. MODELING END MILLING WITH RUNOUT COBEM, ompletar, BR [HAL] / [BIB]
2001 COM Anna Carla Araujo, José Luís Lopes Silveira. THE INFLUENCE OF SPECIFIC CUTTING FORCE ON END MILLING MODELS 16th BRAZILIAN CONGRESS OF MECHANICAL ENGINEERING, Uberlandia, BR [HAL] / [BIB]
2001 COM Anna Carla Araujo, José Luís Silveira. ANALYSIS OF THE SPECIFIC FORCE ON END MILLING 22nd IBERIAN LATIN-AMERICAN CONGRESS ON COMPUTATIONAL METHODS IN ENGINEERING, Campinas, BR [HAL] / [BIB]
1999 COM Anna Carla Araujo, José Luis Lopes Silveira. MODELS FOR THE PREDICTION OF INSTANTANEOUS CUTTING FORCES IN END MILLING 15th Brazilian Congrss of Mechanical Engineering, Aguas de Lindoia, BR [HAL] / [BIB]