Philippe Olivier
Professeur - Institut Universitaire de Technologie en Génie Mécanique et Productique de Toulouse (IUT GMP) Membre du groupe Matériaux et Structures Composites (MSC) AR1011, Espace Clément Ader, 3 rue Caroline Aigle 31400 Toulouse (recherche) |
Activités de recherche :
Matériaux composites
> Mise en œuvre des composites
– composites fibres de carbone à matrice TP PEEK, composites prepregs out-of-autoclave
– déformations résiduelles de cuisson
> Intégration de fonctions
– Conductivité électrique
– Simulation de la conductivité thermique dans composites à particules distribuées aléatoirement
> Composites à tapis de nanotubes de carbone verticalement alignés (avec CEA Saclay – Edifices Nanométriques)
– pptés. mécaniques, thermiques des composites, mise en œuvre
> Suivi de fabrication des composites
– impédancemétrie
– Fibres Optiques à Réseaux de Bragg
Activités d'enseignement :
- Dépt. GMP, IUT Paul Sabatier : Dimensionnement des Structures et Conception Mécanique (96 h)
- Master MECTS, Univ. Paul Sabatier : Contrôles Non Destructifs (10 h)
- Master IMECA, Univ. Pau et Pays de l’Adour : Matériaux Composites – Outils pour la simulation de la mise en œuvre (12 h)
- Master SMMS, Univ. Paul Sabatier, INSA, ISAE-Supaéro, Mines-Albi, ENIT : Mise en oeuvre des composites – formulation des problématiques (4 h)
Responsabilités collectives :
1. Directeur de l’Institut Clément Ader CNRS UMR 5312 du 01/07/2013 au 31/12/2020.
(Anciennement Responsable du Groupe MSC de Janvier 2011 à Juin 2013)
2. Membre de l’Executive Committee du Conseil d’Administration de l’European Society for Composite Materials (ESCM) pendant 8 ans
http://www.escm.eu.org/
3. Membre élu du Conseil d’Administration de l’Association pour les Matériaux Composites (AMAC)
http://www.amac-composites.org/
Chargé de l’édition du bulletin semestriel AMAC INFOS de 2001 à 2015
Responsable de l’organisation du Prix Daniel Valentin de l’AMAC entre 1999 et 2002
Actuellement vice-président de l’AMAC
4. Président des comités Scientifique et d’Organisation des 16° Journées Nationales sur les Composites
(JNC16) Toulouse, 10-12 Juin 2009.
5. Co-organisateur de la JST AMAC « Mise en Oeuvre des Composites à matrice TP » en 2017.
Activités administratives de soutien à la recherche :
1) Période Juillet 2013 à Décembre 2020
Directeur de l’Institut Clément Ader CNRS FRE 3687
Rappels : ICA 2009 –> 2014 = E.A. 814
ICA 2015 = FRE CNRS 3687
ICA 2016 = UMR CNRS 5312
Déménagement des sites de l’ICA vers l’Espace Clément Ader (Toulouse Maontaudran) Janvier –> Avril 2014.
2) De Juin 2010 à Juillet 2013 Membre de l’équipe Projet Espace Clément Ader
Participation aux réunions de planification du Bà¢timent avec le PRES Toulouse (devenu Université Fédérale de Toulouse
Midi Pyrénées en 2015)
Participation aux réunions techniques avec les architectes et les ingénieurs des bureaux d'études
Chiffrage des besoins énergétiques et fluidiques des salles de caractérisation physique des composites
Conception des plans d'aménagement des salles
Rédaction des cahiers des charges et clauses techniques particulières
3) De Janvier 2011 à Juin 2013 Responsable du groupe MSC de l’ICA
Le groupe MSC (Matériaux et Structures Composites comportait sur la période 23
enseignants chercheurs et en moyenne 34 doctorants.
Autre :
Jurys de thèse (France et étranger) et d’HdR (> 40)
Expertises articles revues internationales (> 60
Expertises HCERES (dont présidences de comités)
Expertises ANR et ANRT, …
Expert pour Ministère Recherche Mexique
Chairman du panel d’experts étrangers pour Projet CerTest Royaume Uni (Universités de Bristol, Bath, Southampton, Cranfield)
Production scientifique :
95 contributions trouvéesAnnée | Type | Auteurs et titre du document | Liens |
---|---|---|---|
2024 | ACL | Huikangyue Bao, Philippe Marguerès, Philippe Olivier. An innovative and low-cost system for in situ and real-time cure monitoring using electrical impedancemetry for thermoset and CFRP laminate Measurement Science and Technology, IOP Publishing, 35(3), p.035603 | [HAL] / [BIB] / [DOI] |
2023 | COM | Philippe Olivier, Philippe Margueres, Huikangyue Bao. Suivi de la cuisson d'un composite fibres de carbone / matrice polymère à l'aide d'une méthode d'impédancemétrie spécifique CNRIUT 2023 Saint Pierre - La Réunion, Saint Pierre (La Réunion), RE | [HAL] / [BIB] |
2023 | ACL | Vincent Schenk, Raffaele D’elia, Philippe Olivier, Karine Labastie, Mathias Destarac, Marc Guerre. Exploring the Limits of High- T g Epoxy Vitrimers Produced through Resin-Transfer Molding ACS Applied Materials & Interfaces, Washington, D.C. : American Chemical Society, 15(39), p.46357-46367 | [HAL] / [BIB] / [DOI] |
2022 | COM | Giulia Gastaldo, Younes Rafik, Marc Budinger, Valérie Pommier-Budinger, Philippe Olivier, Pablo Navarro. Proposition of a new qualification impact test for aerospace smart structures ICAS 2022 - 33rd Congress of the International Council of the Aeronautical Sciences, Stockholm, SE | [HAL] / [BIB] |
2022 | COM | Bruno Castanié, Lerdwongpaisan Arnon, Philippe Olivier. Effect of release agent on process-induced deformation in autoclave curing of laminate composites 20th European Conference on Composite Materials (ECCM20),, 8 p., Lausanne, CH | [HAL] / [BIB] |
2022 | ACL | Vincent Schenk, Karine Labastie, Mathias Destarac, Philippe Olivier, Marc Guerre. Vitrimer composites: current status and future challenges Materials Advances, Royal Society of Chemistry | [HAL] / [BIB] / [DOI] |
2021 | COM | Lerdwongpaisan Arnon, Bruno Castanié, Philippe Olivier. Experimental Study on the Out-of-Plane Deformation of Symmetrical Flat Laminate Composites Manufactured through Autoclave Process 24th International Conference on Composite Structures (ICCS24) Faculty of Engineering, University of Porto, Portugal, Porto, PT | [HAL] / [BIB] |
2021 | ACL | Laure Moretti, Philippe Olivier, Bruno Castanié, Gérard Bernhart. Experimental study and in-situ FBG monitoring of process-induced strains during autoclave co-curing, co-bonding and secondary bonding of composite laminates Composites Part A: Applied Science and Manufacturing, Elsevier, 142 | [HAL] / [BIB] / [DOI] |
2020 | ACL | Philippe Marguerès, Philippe Olivier, Mahamadou Mounkaila, Sonia Sassi, Thierry Camps. Carbon fibres reinforced composites. Electrical impedance analysis: a gateway to smartness International Journal of Smart and Nano Materials, Taylor & Francis, 11(4), p.417-430 | [HAL] / [BIB] / [DOI] |
2020 | ACL | Laure Moretti, Bruno Castanié, Gérard Bernhart, Philippe Olivier. Characterization and modelling of cure-dependent properties and strains during composites manufacturing Journal of Composite Materials, SAGE Publications, 54(22), p.3109-3124 | [HAL] / [BIB] / [DOI] |
2019 | COM | Philippe Olivier, Laure Moretti, Bruno Castanié, Léonard Serrano, Gérard Bernhart. Implementation of a Simulation Tool of Strains Induced During the Co-bonding of Autoclave-cured Parts ASC 2019 - 34th Technical Conference of the American Society for Composites, Atlanta, US | [HAL] / [BIB] / [DOI] |
2019 | COM | Laure Moretti, Bruno Castanié, Gérard Bernhart, Léonard Serrano, Philippe Olivier. Mise en place d'un outil de simulation des déformations induites lors du co-collage de pièces composites en autoclave. Implementation of a simulation tool of cure strains induced during theco-bonding of composite parts in autoclave JNC21 : Journées Nationales sur les Composites 2019, 10 p., Bordeaux, Talence, FR | [HAL] / [BIB] |
2019 | COM | Anh Tuan Le, Philippe Olivier, Quentin Govignon, Alexandre Sangar, Pascal Boulanger, Samuel Rivallant, Thierry Cutard. Imprégnation et transfert de tapis de Nanotubes de Carbone Alignés Verticalement sur du préimprégné. Imprégnation et transfert de tapis de nanotubes de carbone alignés verticalement sur un préimprégné JNC 21 : Journées Nationales sur les Composites 2019, 9 p., Bordeaux, Talence, FR | [HAL] / [BIB] |
2019 | COM | Philippe Olivier, Gilles Dusserre, Philippe Marguerès, Philippe Demont. Nanocomposites, composites à matrices nanochargées : conditions de mise en œuvre et propriétés.. Nanocomposites, nanofilled matrices composites: manufacturing conditions and properties JNC 21 : Journées Nationales sur les Composites 2019, 9 p., Bordeaux, Talence, FR | [HAL] / [BIB] |
2019 | ACL | Florian Neveu, Bruno Castanié, Philippe Olivier. The GAP methodology: A new way to design composite structures Materials & Design, Elsevier, 172, p.107755 | [HAL] / [BIB] / [DOI] |
2019 | ACL | Christophe Monnin, Joseph Tamborski, Simon Bejannin, Marc Souhaut, Manon Roques, Philippe Olivier, Pieter van Beek. Freshening of a Coastal Karst Aquifer Revealed by the Temporal Changes in a Spring Water Composition (La Palme, Southern France) Hydrology, MDPI, 6(2), p.45 | [HAL] / [BIB] / [DOI] |
2019 | ACL | Mike Coulson, Eric Dantras, Philippe Olivier, Nathalie Gleizes, Colette Lacabanne. Thermal conductivity and diffusivity of carbon‐reinforced polyetherketoneketone composites Journal of Applied Polymer Science, Wiley, 136(38), p.47975 | [HAL] / [BIB] / [DOI] |
2018 | COM | Philippe Marguerès, Philippe Olivier, Sonia Sassi, Mahamadou Mounkaila, Thierry Camps. Monitoring changes in CFRP laminates microstructure during oven and autoclave curing using electrical impedancemetry 11th International Conference on Manufacturing of Advanced Composites, Nottingham, GB | [HAL] / [BIB] |
2018 | INV | Yves Gourinat, Philippe Olivier, Guilhem Michon, Olivier Cherrier. De l'optique dans les structures. Images rapides et mesures optiques à l'Institut Clément Ader Congrès de la Société Française d’Optique Toulouse 2018, Toulouse, FR | [HAL] / [BIB] |
2018 | COM | Laure Moretti, Gilles Dusserre, Bruno Castanié, Philippe Olivier. Analysis of the influence of the adhesive on process distortions of the co-bonded stringer foot specimens ECCM18 - 18th European Conference on Composite Materials, 8 p., Athènes, GR | [HAL] / [BIB] |
2018 | INV | Yves Gourinat, Philippe Olivier, Guilhem Michon, Olivier Cherrier. De l'optique dans les structures. Images rapides & mesures optiques à l'Institut Clément Ader Optique Toulouse 2018, Congrès de la Société Française d’Optique, Toulouse, FR | [HAL] / [BIB] |
2018 | AP | Olivier de Almeida, Philippe Olivier. Mise en œuvre des composites à matrice thermoplastique. JST AMAC 2017 - Journées scientifiques et techniques de l'AMAC . Toulouse, FRANCE, 26-27 janvier 2017 Revue des composites et des matériaux avancés = Journal of Composite and Advanced Materials, IIETA, 28, 134 p. | [HAL] / [BIB] |
2018 | ACL | Mahamadou Mounkaila, Sonia Sassi, Abbas Hamadi, Philippe Marguerès, Philippe Olivier, Christophe Escriba, Thierry Camps. Modelling the electrical behaviour of carbon/epoxy composites and monitoring changes in their microstructure during oven and autoclave curing using electrical impedancemetry Smart Materials and Structures, IOP Publishing | [HAL] / [BIB] / [DOI] |
2017 | COM | Léonard Serrano, Philippe Olivier, Jacques Cinquin. Modélisation des cinétiques de polymérisation de résines destinées à la fabrication Hors Autoclave JNC 20 : Journées Nationales sur les Composites 2017, Champs sur Marne, FR | [HAL] / [BIB] |
2017 | COM | Florian Neveu, Bruno Castanié, Philippe Olivier. Nouvelle méthodologie de conception pour les structures composites Journées Nationales sur les Composites 2017, 77455 Champs-sur-Marne, FR | [HAL] / [BIB] |
2017 | COM | Léonard Serrano, Philippe Olivier, Jacques Cinquin. Compaction Behavior Of Out-of-Autoclave Prepreg Materials ESAFORM 2017 (20th International Conference on Forming), pp. 1-7, Dublin, IE | [HAL] / [BIB] |
2017 | ACL | Marieke van Lichtervelde, Alexis Grand'Homme, Michel de Saint Blanquat, Philippe Olivier, Axel Gerdes, Jean-Louis Paquette, Joan Carles Melgarejo, Elena Druguet, Pura P. Alfonso. U-Pb geochronology on zircon and columbite-group minerals of the Cap de Creus pegmatites, NE Spain Mineralogy and Petrology, Springer Verlag, 111, p.1-21 | [HAL] / [BIB] / [DOI] |
2017 | COM | L. Serrano, Philippe Olivier, J. Cinquin. Compaction behaviour of out-of-autoclave prepreg materials ESAFORM, 2017, Dublin, Dublin, IE | [HAL] / [BIB] |
2017 | ACL | Mathieu Fogel, Patricia Parlevliet, Philippe Olivier, Eric Dantras. Manufacturing of conductive structural composites through spraying of CNTs/epoxy dispersions on dry carbon fiber plies Composites Part A: Applied Science and Manufacturing, Elsevier, vol. 100, pp. 40-47 | [HAL] / [BIB] / [DOI] |
2017 | COM | Florian Neveu, Bruno Castanié, Philippe Olivier. A NEW PRE-DESIGN METHODOLOGY FOR INNOVATIVE COMPOSITE STRUCTURES International Conference of Composite Materials (ICCM 21),Xi'an China, August 20-25, 2017, Xi'an, CN | [HAL] / [BIB] |
2017 | AP | Léonard Serrano, Philippe Olivier, Jacques Cinquin. Compaction Behavior Of Out-of-Autoclave Prepreg Materials | [HAL] / [BIB] |
2016 | ACL | Sonia Sassi, Philippe Marguerès, Rébecca Le Begue, Mahamadou Mounkaila, Philippe Olivier, Thierry Camps. Détermination des paramètres géométriques pour la caractérisation électrique d’un composite T700/M21 en cours de cuisson Matériaux & Techniques, EDP Sciences, 104(4), p.411 | [HAL] / [BIB] / [DOI] |
2016 | ACL | Natassia Lona Batista, Philippe Olivier, Gérard Bernhart, Mirabel Cerqueira Rezende, Edson Cocchieri Botelho. Correlation between degree of crystallinity, morphology and mechanical properties of PPS/carbon fiber laminates Materials Research, Associação Brasileira de Metalurgia e Materiais (ABM); Associação Brasileira de Cerâmica (ABC); Associação Brasileira de Polímeros (ABPol), 19(1), p. 195-201 | [HAL] / [BIB] / [DOI] |
2016 | ACL | Lisa Rivière, Antoine Lonjon, Eric Dantras, Colette Lacabanne, Philippe Olivier, Nathalie Rocher Gleizes. Silver fillers aspect ratio influence on electrical and thermal conductivity in PEEK/Ag nanocomposites European Polymer Journal, Elsevier, 85, p.115-125 | [HAL] / [BIB] / [DOI] |
2016 | COM | S. Sassi, Philippe Marguerès, M. Mounkaila, T. Camps, Philippe Olivier. GEOMETRICAL INVESTIGATION FOR THE ELECTRICAL CHARACTERIZATION OF T700/M21 CFRP COMPOSITE DURING CURING ECCM17, Munich, FR | [HAL] / [BIB] |
2016 | ACL | Sonia Sassi, Philippe Marguerès, Philippe Olivier, Rébecca Le Begue. Determination of anisotropic geometrical parameters for the electrical characterization of carbon/epoxy composite during oven curing Composites Part A: Applied Science and Manufacturing, Elsevier, 80, p.204--216 | [HAL] / [BIB] |
2015 | COM | Ludovic Chevallier, Quentin Govignon, Philippe Olivier, Gérard Bernhart, Martine Mayne-L'Hermite. Mechanical effects of the injection-CVD nanostructuration of carbon-fibre composites investigated by bundle tensile test and DMA ICCM 20 - 20th International Conference on Composite Materials, 10 p., Copenhagen, DK | [HAL] / [BIB] |
2015 | COM | Bruno Baynat, Raluca-Maria Indre, Narcisse Nya Kamtchoum, Philippe Olivier, Alain Simonian. Impact of Mobility in Dense LTE-A Networks with Small Cells 2015 IEEE 81st Vehicular Technology Conference (VTC2015-Spring), p.1-5, Glasgow, GB | [HAL] / [BIB] / [DOI] |
2015 | ACL | Mathieu Fogel, Patricia Parlevliet, Matthias Geistbeck, Philippe Olivier, Eric Dantras. Thermal, rheological and electrical analysis of MWCNTs/epoxy matrices Composites Science and Technology, Elsevier, vol. 110, pp. 118-125 | [HAL] / [BIB] / [DOI] |
2015 | ACL | Sonia Sassi, Philippe Marguerès, Thierry Camps, Mahamadou Mounkaila, Philippe Olivier. CURE MONITORING AND SHM OF CARBON FIBER REINFORCED POLYMER PART II : MULTI-PHYSICAL CORRELATIONS e-Journal of Nondestructive Testing, Nondestructive Testing (NDT), 20(2), p.567-574 | [HAL] / [BIB] |
2015 | COM | Y. Aminanda, K. Mansur Ali, M. Nasir, M. Nazreen, A. Rivai, Bruno Castanié, Philippe Olivier. Spring-back Prediction of CRFP Composite Laminate Ribs Conference on Advances in Composite Materials and Structures, Istanbul, April 2015, Istanbul, TR | [HAL] / [BIB] |
2015 | COM | J. Bouillonnec, Gérard Bernhart, M. Pinault, Philippe Olivier, M. Mayne-L'Hermite. Thermal conductivity enhancement of vertically aligned nanotube carpet reinforced thermoset composites ICCS18 - 18th International Conference on Composite Structures, Lisbon, PT | [HAL] / [BIB] |
2015 | ACL | L. Mezeix, A. Seman, M. N. M. Nasir, Y. Aminanda, A. Rivai, Bruno Castanié, Philippe Olivier, K. M. Ali. Spring-back simulation of unidirectional carbon/epoxy flat laminate composite manufactured through autoclave process Composite Structures, Elsevier, 124, p.196--205 | [HAL] / [BIB] |
2015 | ACL | Matthieu Mulle, Ali Moussawi, Gilles Lubineau, Samuel Durand, Didier Falandry, Philippe Olivier. Response of fiber Bragg gratings bonded on a glass/epoxy laminate subjected to static loadings Composite Structures, Elsevier, 130, p.75--84 | [HAL] / [BIB] / [DOI] |
2015 | COM | S. Sassi, Philippe Marguerès, R. Le Begue, Philippe Olivier. DETERMINATION OF GEOMETRICAL PARAMETERS FOR ELECTRICAL CHARACTERIZATION OF A CFRP DURING CURING 20th International Conference on Composite Materials - ICCM20, Copenhagen, DK | [HAL] / [BIB] |
2015 | ACL | Mahamadou Moukaila, Thierry Camps, Philippe Marguerès, Philippe Olivier, Christophe Escriba, Jean-Yves Fourniols. Cure Monitoring and SHM of Carbon Fiber Reinforced Polymer Part I : Impedance Analysis and Multiphysic Sensitivity e-Journal of Nondestructive Testing, Nondestructive Testing (NDT), 20(2), p.560-566 | [HAL] / [BIB] |
2015 | ACL | Everson Kandare, Akbar A. Khatibi, Sanghyun Yoo, Ruoyu Wang, Jun Ma, Philippe Olivier, Nathalie Gleizes, Chun H. Wang. Improving the through-thickness thermal and electrical conductivity of carbon fibre/epoxy laminates by exploiting synergy between graphene and silver nano-inclusions Composites Part A: Applied Science and Manufacturing, Elsevier, 69, p.72--82 | [HAL] / [BIB] |
2014 | COM | Jonathan Bouillonnec, Émeline Charon, Mathieu Pinault, Gérard Bernhart, G. Leblanc, Martine Mayne-L'Hermite, Philippe Olivier. Propriétés thermiques de composites nanotubes de carbone verticalement alignés / époxy Matériaux 2014, Montpellier, FR | [HAL] / [BIB] |
2014 | COM | Sonia Sassi, Philippe Marguerès, Thierry Camps, Mahamadou Mounkaila, Philippe Olivier. Cure Monitoring and SHM of Carbon Fiber Reinforced Polymer Part II : Multi-Physical Correlations EWSHM - 7th European Workshop on Structural Health Monitoring, Nantes, FR | [HAL] / [BIB] |
2014 | COM | Mahamadou Mounkaila, Thierry Camps, Sonia Sassi, Philippe Marguerès, Philippe Olivier, Christophe Escriba, Jean-Yves Fourniols. Cure Monitoring and SHM of Carbon Fiber Reinforced Polymer Part I : Impedance Analysis and Multiphysic Sensitivity EWSHM - 7th European Workshop on Structural Health Monitoring, Nantes, FR | [HAL] / [BIB] |
2014 | COM | Ludovic Chevallier, Quentin Govignon, Philippe Olivier, Gérard Bernhart, Jonathan Bouillonnec, Martine Mayne-L'Hermite. Three-dimensional permeability determination of reinforced composites structures with vertically aligned carbon nanotube forests ECCM 16 - 16th European Conference on Composite Materials, 8 p., Seville, ES | [HAL] / [BIB] |
2014 | ACL | Philippe Marguerès, Thierry Camps, Philippe Olivier. Impédancemétrie électrique pour le monitoring de composites carbone/époxy Revue des composites et des matériaux avancés = Journal of Composite and Advanced Materials, IIETA, 24(2), p.207-220 | [HAL] / [BIB] / [DOI] |
2014 | COM | S. Adam, L. Mezeix, A. Rivai, Y. Aminanda, Philippe Olivier, Bruno Castanié, K. Ali Mansour. Experimental and analytical study of flat laminate composite spring-back manufactured through autoclave process Computational and experimental methods for composite materials and structures, Harbin (China), September 2014, Harbin, CN | [HAL] / [BIB] |
2014 | ACL | Ekaterina Pavlenko, François Boyer, Pascal Puech, Philippe Olivier, Andrei Sapelkin, Stephen King, Richard Heenan, François Pons, Bénédicte Gauthier, Pierre-Henri Cadaux, Wolfgang Bacsa. Origin of mechanical modifications in poly (ether ether ketone)/carbon nanotube composite Journal of Applied Physics, American Institute of Physics, 115(23), p.234901 | [HAL] / [BIB] / [DOI] |
2014 | COM | L. Mezeix, M.N. Nasir, L. Aminanda, A. Rivai, Bruno Castanié, Philippe Olivier, K. Ali Mansour. Spring-back prediction through numerical simulation for composite manufacturing using autoclave process Computational and experimental methods for composite materials and structures, Harbin (China), September 2014, Harbin, CN | [HAL] / [BIB] |
2014 | COM | T. Nguyen, Philippe Olivier. THERMAL AND MECHANICAL BEHAVIOUR OF PAN AND PITCHBASED CARBON FIBER WOVEN FABRIC REINFORCED PARTICLE FILLED EPOXY COMPOSITES ICCM 16 - 16th International Conference on Composite Materials. Sevilla Spain 22-26 June 2014., 8 pages, Sevilla, ES | [HAL] / [BIB] |
2014 | O | Yoann Denèle, Bernard Laumonier, Jean-Louis Paquette, Philippe Olivier, Gérard Gleizes, Pierre Barbey. Timing of granite emplacement, crustal flow and gneiss dome formation in the Variscan segment of the Pyrenees 405, p.265-287 | [HAL] / [BIB] / [DOI] |
2013 | ACL | Philippe Marguerès, Thierry Camps, Mathieu Viargues, Philippe Olivier. Preliminary experimental study on the electrical impedance analysis for in-situ monitoring of the curing of carbon/epoxy composite material for aeronautical and aerospace structures Measurement Science and Technology, IOP Publishing, 24(9), p.095005 | [HAL] / [BIB] / [DOI] |
2013 | COM | Bénédicte Reine, Jérémy Di Tomasou, Gilles Dusserre, Philippe Olivier. Study and simulation of thermal conductivity of organic matrix composites ICCM 19 - 19th International Conference on Composite Materials, p.3587-3596, Montreal, CA | [HAL] / [BIB] |
2013 | COM | Jonathan Bouillonnec, Philippe Olivier, Martine Mayne-L'Hermite, Mathieu Pinault, Gérard Bernhart, Le Blanc Gaël. Elaboration et étude des propriétés mécaniques de matériaux composites renforcés par des tapis de nanotubes de carbone alignés. Elaboration and investigation of mechanical properties of composites reinforced by aligned carbon nanotubes carpets JNC 18 - 18èmes Journées Nationales sur les Composites, 10 p., Nantes, FR | [HAL] / [BIB] |
2013 | COM | Bénédicte Reine, Jérémy Di Tomaso, Gilles Dusserre, Philippe Olivier. Etude et simulation de la conductivité thermique de matériaux composites à matrice organique. Study and simulation of thermal conductivity of organic matrix composites JNC 18 - 18èmes Journées Nationales sur les Composites, 10 p., Nantes, FR | [HAL] / [BIB] |
2013 | COM | Philippe Marguerès, T. Camps, Philippe Olivier, S. Sassi, M. Mounkaila. CURE MONITORING OF CFRP: ELECTRICAL IMPEDANCE ANALYSIS 19th International Conference on Composite Materials - ICCM19, Montréal, CA | [HAL] / [BIB] |
2013 | COM | S. Sassi, Philippe Marguerès, T. Camps, Philippe Olivier. Suivi de cuisson de composites Carbone/Epoxy par impédancemétrie électrique JNC 18, Nantes, FR | [HAL] / [BIB] |
2012 | ACL | Ihab El Sawi, Philippe Olivier, Philippe Demont, Habiba Bougherara. Processing and electrical characterization of a unidirectional CFRP composite filled with double walled carbon nanotubes Composites Science and Technology, Elsevier, vol. 73, pp. 19-26 | [HAL] / [BIB] / [DOI] |
2012 | ACL | Ihab El Sawi, Philippe Olivier, Philippe Demont, Habiba Bougherara. Investigation of the effect of double-walled carbon nanotubes on the curing reaction kinetics and shear flow of an epoxy resin Journal of Applied Polymer Science, Wiley, vol. 126, p.358-366 | [HAL] / [BIB] / [DOI] |
2012 | COM | Bénédicte Reine, Jérémy Di Tomaso, Gilles Dusserre, Philippe Olivier. Study of thermal behaviour of thermoset polymer matrix filled with micro and nanoparticles ECCM 15 -15th European Conference on Composite Materials, 9 p., Venice, IT | [HAL] / [BIB] |
2012 | ACL | Christophe Paris, Gérard Bernhart, Philippe Olivier, Olivier de Almeida. Influence de cycles de cuisson rapides sur le préimprégné aéronautique M21/T700 : suivi de polymérisation et propriétés mécaniques Matériaux & Techniques, EDP Sciences, 100(6-7), p.611-622 | [HAL] / [BIB] |
2012 | CO | Philippe Olivier, Matthieu Mulle, Christophe Paris, Francis Collombet. Carbon/polymeric composites autoclave cure monitoring with optical fiber bragg grating (FBG) sensors p.230-240 | [HAL] / [BIB] |
2012 | ACL | Yoann Denèle, Jean-Louis Paquette, Philippe Olivier, Pierre Barbey. Permian granites in the Pyrenees: the Aya pluton (Basque Country) Terra Nova, Wiley-Blackwell, 24, p.105-113 | [HAL] / [BIB] / [DOI] |
2012 | P | J. Bouillonnec, M. Pinault, M. Mayne-L'Hermite, Gérard Bernhart, Philippe Olivier, M. Gardou. Composite materials prepared from vertically aligned carbon nanotubes: elaboration and properties ChemOnTubes 2012 (Arcachon), Arcachon, FR | [HAL] / [BIB] |
2012 | COM | F. Boyer, Philippe Olivier, F. Pons, P.H. Cadaux. Mechanical and electrical behavior of a PEEK/carbon nanotubes composite 15th European Conference on Composite Materials, Venice, IT | [HAL] / [BIB] |
2012 | COM | Philippe Marguerès, T. Camps, Philippe Olivier. Impédancemétrie électrique pour le monitoring de composites Carbone/Epoxy Journée Scientifique et Technique (JST) AMAC "Smart Material : intégration de fonctions et comportement mécanique des multi-matériaux" ,Laval, France, Laval, FR | [HAL] / [BIB] |
2011 | COM | Ophélie Westphal, Nadia Bahlouli, Yves Rémond, Philippe Olivier, Laurent Gornet, Fabrice Lawniczak, Wilfried Uhring, Samuel Maillard, Célia Chevallier. Caractérisation des dommages au choc de composites stratifiés aéronautiques : application à la chute d'objets 17èmes Journées Nationales sur les Composites (JNC17), p.172, Poitiers-Futuroscope, FR | [HAL] / [BIB] |
2011 | COM | F. Boyer, Philippe Olivier, M. Guehenec, Frédéric Léonardi, S. Dagréou, P. van Durmen, P. Demont, F. Pons, P.H. Cadaux. Comportement mécanique et électrique d'un composite PEEK / fibres de carbone / nanotubes de carbone 17èmes Journées Nationales sur les Composites (JNC17), p.109, Poitiers-Futuroscope, FR | [HAL] / [BIB] |
2011 | COM | Philippe Olivier, Christophe Paris, François Boyer, Ihab El Sawi, Gérard Bernhart. Elaboration des matériaux composites : procédés et simulations associées Mecamat Aussois 2011, p.17-24, Aussois, FR | [HAL] / [BIB] |
2010 | COM | Christophe Paris, Philippe Olivier, Gérard Bernhart. Time reduction of manufacturing cycle in a high heating ramp process for carbon/polymeric composite : thermokinetic caracterization ECCM 14 -14th European Conference on Composite Materials, 11 p., Budapest, HU | [HAL] / [BIB] |
2010 | COM | Christophe Paris, Philippe Olivier, Gérard Bernhart. Modelling of the thermokinetic behaviour and the phases transitions of a carbon/polymeric composite submitted to high heating rate ramps ESAFORM 2010 -13th International ESAFORM conference on material forming, 4 p., Brescia, IT | [HAL] / [BIB] |
2010 | ACL | Philippe Olivier, Ihab El Sawi. Designing curing conditions in order to analyse the influence of process-induced stresses upon some mechanical properties of carbon / epoxy laminates at constant T\textlessSubscript\textgreaterg\textless/Subscript\textgreater and degree of cure Int J Mater Form, 3(2), p.1373--1389 | [HAL] / [BIB] / [DOI] |
2010 | ACL | M. Hautier, D. Lévêque, C. Huchette, Philippe Olivier. Investigation of composite repair method by liquid resin infiltration Plastics, Rubber and Composites, Maney Publishing, 39(3-5), p.200--207 | [HAL] / [BIB] / [DOI] |
2010 | ACL | Christophe Paris, Philippe Olivier, Gérard Bernhart. Modelling of the thermokinetic behaviour and the phases transitions of a carbon/polymeric composite submitted to high heating rate ramps International Journal of Material Forming, Springer Verlag, 3(Suppl. 1), p.639-642 | [HAL] / [BIB] / [DOI] |
2009 | COM | Mathieu Hautier, David Lévêque, Cédric Huchette, Philippe Olivier. Réparation des composites par infiltration de résine = Investigation of a composite repair method by liquid resin infiltration JNC 16, 10 p., Toulouse, FR | [HAL] / [BIB] |
2009 | COM | Arnaud Gillet, Philippe Olivier, Abir Al Maghribi, Ihab El Sawi. Prédiction des propriétés électrique d'un composite aéronautique = Prediction of electrical properties of an aeronautic composite JNC16, 10 p., Toulouse, FR | [HAL] / [BIB] |
2009 | COM | Ilhab Elsawi, Philippe Olivier, Philippe Demont, Christophe Laurent, Alain Peigney. Comportement rhéologique et cinétique d'une résine époxyde chargée de nanotubes de carbone double parois = Rheological and kinetic behavior of double-walled carbon nanotubes filled epoxy resin JNC 16, 9 p., Toulouse, FR | [HAL] / [BIB] |
2009 | COM | K. E. Tarsha Kurdi, M. H. Ibrahim, A. Alabdallah, Philippe Olivier. Étude expérimentale de l'effet de l'empilement sur les caractéristiques mécaniques des stratifiés (verre/polyester) = The effect of lamination method on mechanical properties of (glass / polyester) composite, Experimental study JNC16, 8 p., Toulouse, FR | [HAL] / [BIB] |
2009 | ACL | M. Mulle, Francis Collombet, Philippe Olivier, Redouane Zitoune, C. Huchette, Frédéric Laurin, Y.H. Grunevald. Assessment of cure-residual strains through the thickness of carbon-epoxy laminates using FBGs Part II: Technological specimen Composites Part A: Applied Science and Manufacturing, Elsevier, 40(10), p.1534--1544 | [HAL] / [BIB] / [DOI] |
2009 | ACL | M. Mulle, Francis Collombet, Philippe Olivier, Y.H. Grunevald. Assessment of cure residual strains through the thickness of carbon-epoxy laminates using FBGs, Part I: Elementary specimen Composites Part A: Applied Science and Manufacturing, Elsevier, 40(1), p.94--104 | [HAL] / [BIB] / [DOI] |
2008 | ACL | Yoann Denèle, Philippe Olivier, Gérard Gleizes. Progressive deformation of a zone of magma transfer in a transpressional regime: The Variscan Mérens shear zone (Pyrenees, France) Journal of Structural Geology, Elsevier, 30, p.1138-1149 | [HAL] / [BIB] / [DOI] |
2007 | COM | Philippe A Olivier, Benoit Mascaro, Philippe Marguerès, Francis Collombet. CFRP with voids: ultrasonic characterization of localized porosity, acceptance criteria and mechanical characteristics 16TH INTERNATIONAL CONFERENCE ON COMPOSITE MATERIALS, Kyoto, JP | [HAL] / [BIB] |
2007 | COM | Philippe Olivier, Philippe Marguerès, Benoit Mascaro, Francis Collombet. Porosités dans les stratifiés carbone/polymère : critère d’admissibilité et modélisation des propriétés mécaniques. VOIDS IN CARBON/POLYMERIC LAMINATES: ACCEPTANCE CRITERIA AND MECHANIC PROPERTIES MODELLING 15èmes Journées Nationales sur les Composites, p.73-80, Marseille, FR | [HAL] / [BIB] |
2007 | AP | Philippe Olivier, Philippe Marguerès, Jean-José Orteu. Contrôles non destructifs et matériaux composites : journée scientifique et technique AMAC/COFREND. Journées scientifique et technique AMAC/COFREND. Toulouse, France, du 27-28 juin 2006 Revue des composites et des matériaux avancés = Journal of Composite and Advanced Materials, IIETA, 17(2/2007), pp. 143-260 | [HAL] / [BIB] |
2006 | COM | Ph Marguerès, Ph Olivier, B Mascaro, F Collombet. Acceptability criterion for porosity in carbon/epoxy composites. Critère d'admissibilité des porosités dans des composites carbone/époxyde 1er Congrès Méditerranéen sur Les Matériaux Composites, Béchar, Algérie, Dec 9-11 2006, Béchar, DZ | [HAL] / [BIB] |
2006 | COM | Ph Olivier, Philippe Marguerès, Benoit Mascaro, K. E. Tarsha Kurdi, Francis Collombet. ASSESSMENT OF THE EFFECTS OF VOIDS ON SOME PHYSICAL, MECHANICAL AND DAMAGE MECHANICS PROPERTIES OF CARBON/POLYMERIC COMPOSITES 12th European Conference On Composite Materials, Biarritz, FR | [HAL] / [BIB] |
2005 | ACL | Philippe Marguerès, Jorge Lopez-Torres, Philippe Olivier, Francis Collombet. Méthodologie de caractérisation des structures composites obtenues par rfi avec le matériau HexFIT™ Revue des composites et des matériaux avancés = Journal of Composite and Advanced Materials, IIETA, 15(3), p.401 - 412 | [HAL] / [BIB] / [DOI] |
2004 | COM | Philippe Marguerès, Jorge Lopez Torres, Philippe Olivier, Francis Collombet. Méthodologie de caractérisation des structures composites obtenues par RFI avec le matériau HexFIT™ Journée Scientifique et Technique "Mise en forme des matériaux composites" AMAC et SFT, Le Havre, FR | [HAL] / [BIB] |
2003 | COM | Thomas Bonald, Philippe Olivier, James Roberts. Dimensioning high speed IP access networks ITC, Berlin, DE | [HAL] / [BIB] / [DOI] |