Yann Landon

Professeur - Université Paul Sabatier (UPS)
Membre du groupe Surfaces, Usinages, Matériaux et Outillages (SUMO)
BR2022, Espace Clément Ader, 3 rue Caroline Aigle
31400 Toulouse
  yann.landon@univ-tlse3.fr
    (recherche)
Activités de recherche :

Usinage Multi-Matériaux   –   Multi-Material Machining

Characterization, modelling, optimization and qualification of multi-material machining processes, especially for aeronautical parts and assembly:

 

  • * Drilling
    of  multi-material stacks: process modelling/simulation; process optimization (machine control, cutting tools,
    operating conditions) on economic , productivity and/or quality criteria; process qualification (capability, energy performance, …).
  • – Axial drilling, Vibration-assisted drilling, Orbital drilling
  • – Aluminium alloys, Composites, Titanium alloys…
  • – Drilling for structural assembly of aeronautical structures

(video link)

  • * Milling : process modelling/simulation-optimization de process; dynamic behavior of machine and tools for sculptured surface machining.

(video link)

Actual research projects:

  • – Research project H2020 Clean Sky 2 RODEO (Robotized Orbital Drilling Equipment and Optimized residual stresses) that involves 3 industrial partners (PRECISE France – project leader, MITIS Engineering, KUKA Systems Aerospace France) and 2 academic partners (University of Nantes, University Toulouse 3), H2020-CS2-CFP03-2016-01 project 738219, 2017-2020.
  • – Surface texture characterization (multi-material boreholes, composites, cimentitious pastes…).
  • – Surface and material integrity in drilling for assembly. Application to Ti alloys and hard metals.
  • – Material behavior laws including thermomechanical coupling for elementary cutting modelling. Application to Ti alloys.
  • – Vibration-assisted drilling: geometric quality and material integrity. Application to
    CFRP-Al stacks.
  • – Vibration-assisted drilling: characterization of specific cutting mechanisms and model uncertainties. Application to Al and Ti alloys.
  • – Vibration-assisted drilling:
    optimization of operating parameters through the control of the dynamic behavior of the drilling equipment.
  • – Orbital drilling:
    analytical modelling/simulation of the process and optimization. Application to CFRP-Ti stacks.
  • – Axial drilling: quality monitoring through the use of acoustic emission signals. Application to CFRP-Ti stacks.

 



Activités d'enseignement :

* Composites : material and manufacturing, machining.

* CAD/CAM and CNC machining. 5-axis machining.

* Manufacturing methods.

* Dynamics in machining, vibrations and chatter, High-Speed Machining.

 



Responsabilités collectives :

* Leader of the Transverse axis  « Multi-Material Machining » and of the team « Machining and Forming processes ».

* Manager of the 2nd year of Master Degree on Aeronautical Manufacturing Processes and Quality Management.

 



Production scientifique :
69 contributions trouvées

AnnéeTypeAuteurs et titre du documentLiens
2022 COM M Moreira, Anna Carla Araujo, Yann Landon. Timed automaton models for fault diagnosis of the drilling process on a CNC machine. Diagnóstico de falhas do processo de furação em uma máquina CNC XXIV Congresso Brasileiro de Automática, Fortaleza, BR [HAL] / [BIB]
2022 ACL Maria Clara Coimbra Gonçalves, Sughosh Deshpande, Anna Carla Araujo, Pierre Lagarrigue, Yann Landon. Specific force map for smart machining applications with rotating tools Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture, SAGE Publications [HAL] / [BIB] / [DOI]
2022 COM Yann Landon, Alexandra Lacombe, Landry Arnaud Kamgaing Souop, Alain Daidié, Manuel Paredes, Audrey Benaben, Clément Chirol. Correlations between the hole surface integrity and fatigue life for drilled 2024-T351 aluminum alloy International Joint Conference on Mechanics, Design Engineering and Advanced Manufacturing, Ischia (NA), IT [HAL] / [BIB]
2022 COM Adrien Loiseau, Thibault Marsan, Pablo Navarro, Bruno Watier, Yann Landon. Optimizing racing wheelchair design through coupled biomechanical-mechanical simulation International Joint Conference on Mechanics, Design Engineering and Advanced Manufacturing, Ischia (NA), IT [HAL] / [BIB]
2022 ACL Yann Landon, Alexandra Lacombe, Landry Arnaud Kamgaing Souop, Alain Daidié, Manuel Paredes, Clément Chirol, Audrey Benaben. Impact of the drilling process on the surface integrity and residual fatigue strength of 2024-T351 aluminum parts Procedia CIRP, ELSEVIER, 108, p.459 - 464 [HAL] / [BIB] / [DOI]
2022 COM Sughosh Deshpande, Anna Carla Araujo, Pierre Lagarrigue, Yann Landon. EXPERIMENTAL ANALYSIS OF CIRCULAR MILLING FOR MATERIAL IDENTIFICATION IN AEROSPACE INDUSTRY ESAFORM 2022, Braga, PT [HAL] / [BIB] / [DOI]
2021 COM Anna Carla Araujo, Marcos Vicente Moreira, Yann Landon. Fault diagnosis of CNC machine-tools for drilling Titanium alloy 15th Conference on Intelligent Computation in Manufacturing Engineering, "Innovative and Cognitive Production Technology and Systems", Naples, IT [HAL] / [BIB]
2021 COM Camille Bonnet, Thomas Pottier, Yann Landon. Validation d’un modèle numérique de la coupe oblique du Ti-6Al-4V par mesures de champs thermomécaniques couplées Manufacturing'21, 14 p., Angers (à distance), FR [HAL] / [BIB]
2021 COM Anna Carla Araujo, Maria Clara Coimbra Gonçalves, Gilmar Ferreira Batalha, Yann Landon. SMART DRILLING: MATERIAL IDENTIFICATION USING SPECIFIC FORCE MAP 11º Congresso Brasileiro de Engenharia de Fabricação, Curitiba, BR [HAL] / [BIB]
2021 COM Camille Bonnet, Thomas Pottier, Yann Landon, Abdallah Bouzid. Validation of a multi-scale Ti-6Al-4V drilling model by means of thermomechanical field measurements ESAFORM 2021 - 24th International Conference on Material Forming, En ligne, BE [HAL] / [BIB] / [DOI]
2021 ACL Alexandra Lacombe, Yann Landon, Manuel Paredes, Damien Texier, Clément Chirol, Audrey Benaben. Investigations on the impact of the hole surface integrity on the fatigue life of a 2024‐T351 aluminum alloy drilled part Fatigue and Fracture of Engineering Materials and Structures, Wiley-Blackwell, 44(6), p.1455-1468 [HAL] / [BIB] / [DOI]
2021 ACL Anna Carla Araujo, Yann Landon, Pierre Lagarrigue. Smart drilling for Aerospace Industry: state of art in research and education Procedia CIRP, ELSEVIER, 99, p.387-391 [HAL] / [BIB] / [DOI]
2021 ACL Camille Bonnet, Thomas Pottier, Yann Landon. Development of a multi-scale and coupled cutting model for the drilling of Ti-6Al-4V CIRP Journal of Manufacturing Science and Technology, Elsevier, 35, p.526-540 [HAL] / [BIB] / [DOI]
2020 COM Anna Carla Araujo, Yann Landon, Pierre Lagarrigue. Smart drilling for Aerospace Industry: state of art in research and education 14th CIRP Conference on Intelligent Computation in Manufacturing Engineering, CIRP ICME ˈ20, Naples, IT [HAL] / [BIB]
2020 COM Alexandra Lacombe, Yann Landon, Manuel Paredes, Clément Chirol, Audrey Benaben. Influence of the hole surface integrity on the fatigue strength of an aluminium drilled part International Joint Conference on Mechanics, Design Engineering and Advanced Manufacturing, Aix-en-Provence, FR [HAL] / [BIB]
2020 ACL Pierre Rahmé, P. Moussa, Frédéric Lachaud, Yann Landon. Effect of adding a woven glass ply at the exit of the hole of CFRP laminates on delamination during drilling Composites Part A: Applied Science and Manufacturing, Elsevier, 129, p.105731 [HAL] / [BIB] / [DOI]
2020 ACL Mahmoud Harzallah, Thomas Pottier, Rémi Gilblas, Yann Landon, Michel Mousseigne, Johanna Senatore. Thermomechanical coupling investigation in Ti-6Al-4V orthogonal cutting: experimental and numerical confrontation International Journal of Mechanical Sciences, Elsevier, 169, p.105322 [HAL] / [BIB] / [DOI]
2019 COM Alexandra Lacombe, Yann Landon, Manuel Paredes, Clément Chirol, Audrey Benaben. Impact of the drilling process on the fatigue life of an aluminium 2024-T351 part 1st International Conference on Advanced Joining Processes, Ponta Delgada, Azores, PT [HAL] / [BIB]
2019 COM Landry Arnaud Kamgaing Souop, Yann Landon, Johanna Senatore, Alain Daidié, Mathieu Ritou. Orbital Drilling Optimization in High Speed Machining and Fatigue Life Enhancement by Orbital Roller Burnishing: Application to an Aluminum Alloy SAE International Conference, p.1-13, Bordeaux, FR [HAL] / [BIB] / [DOI]
2019 ACL R. Jerez-Mesa, J.A. Travieso-Rodríguez, Yann Landon, G. Dessein, J. Lluma-Fuentes, V. Wagner. Comprehensive analysis of surface integrity modification of ball-end milled Ti-6Al-4V surfaces through vibration-assisted ball burnishing Journal of Materials Processing Technology, Elsevier, 267, p.230-240 [HAL] / [BIB]
2019 ACL Alexandre Lacombe, Yann Landon, Manuel Paredes, Clément Chirol, Audrey Benaben. Numerical simulation of the reaming process in aluminium 2024-T351 – Analysis of the evolution of the material stress state. Simulación numérica del proceso de escariado en aluminio 2024-t351 - Análisis de la evolución del estado de tensión del material DYNA : Ingenieria e Industria, Federación de Asociaciones de Ingenieros Industriales, 94, p.215-220 [HAL] / [BIB] / [DOI]
2019 ACL Célestine Voegel, Nadège Durban, Alexandra Bertron, Yann Landon, Benjamin Erable. Evaluation of microbial proliferation on cementitious materials exposed to biogas systems Environmental Technology, Taylor & Francis: STM, Behavioural Science and Public Health Titles, p.1-11 [HAL] / [BIB]
2018 COM Farid Miah, Emmanuel de Luycker, Frederic Lachaud, Yann Landon, Robert Piquet. Effect of different cutting depths to the cutting forces and machining quality of CFRP parts in orthogonal cutting ─ a numerical and experimental comparison ASME 2018 International Mechanical Engineering Congress and Exposition IMECE2018, p.1-11, Pittsburgh, US [HAL] / [BIB]
2018 ACL R. Jerez-Mesa, Yann Landon, J.A. Travieso-Rodriguez, G. Dessein, J. Lluma-Fuentes, V. Wagner. Topological surface integrity modification of AISI 1038 alloy after vibration-assisted ball burnishing Surface and Coatings Technology, Elsevier, 349, p.364-377 [HAL] / [BIB]
2018 ACL Mahmoud Harzallah, Thomas Pottier, Rémi Gilblas, Yann Landon, Michel Mousseigne, Johanna Senatore. A coupled in-situ measurement of temperature and kinematic fields in Ti-6Al-4V serrated chip formation at micro-scale International Journal of Machine Tools and Manufacture, Elsevier [HAL] / [BIB] / [DOI]
2018 COM Landry Kamgaing Souop, Alain Daidié, Yann Landon, Johanna Senatore, Mathieu Ritou. Investigation of Aluminum Alloy Properties During Helical Roller Burnishing Through Finite Element Simulations and Experiments International Joint Conference on Mechanics, Design Engineering & Advanced Manufacturing, p.440-450, Carthagena, ES [HAL] / [BIB] / [DOI]
2018 COM Alexandra Lacombe, Yann Landon, Manuel Paredes, Clément Chirol, Audrey Benaben. Numerical evaluation of residual stress induced by reaming of aluminium 2024-T351 International Joint Conference on Mechanics, Design Engineering and Advanced Manufacturing, Cartagena, ES [HAL] / [BIB]
2018 COM Alexandra Lacombe, Yann Landon, Manuel Paredes, Clément Chirol, Audrey Benaben. Impact du procédé de perçage dans de l'aluminium 2024-T351 sur les sollicitations thermomécaniques subies par la pièce percée MUGV & Manufacturing'21, Bordeaux, FR [HAL] / [BIB]
2018 ACL Oleksii Shtehin, Sébastien Seguy, Vincent Wagner, Yann Landon, Gilles Dessein, Michel Mousseigne. Low-frequency chatter genesis during inclined surface copy-milling with ball-end mill: Experimental study Machining Science and Technology, Taylor & Francis, 22(4), p.621-637 [HAL] / [BIB] / [DOI]
2017 ACL Yang Xu, Yann Landon, Stéphane Segonds, Yicha Zhang. A decision support model in mass customization Computers & Industrial Engineering, Elsevier, 114, p.11--21 [HAL] / [BIB] / [DOI]
2017 ACL Yang Xu, Yann Landon, Stéphane Segonds, Yicha Zhang. A decision support model in mass customization Computers & Industrial Engineering, Elsevier, 114, p.11-21 [HAL] / [BIB] / [DOI]
2017 COM Ramon Jerez Mesa, Yann Landon, Jose Antonio Travieso-Rodríguez, Giovanni Gomez-Gras, Jordi Lluma-Fuentes. Ultrasonic burnishing of AISI 316L stainless steel curved surfaces XIII Iberoamerican Conference on Mechanical Engineering CIBEM 2017, Lisbon, PT [HAL] / [BIB]
2017 COM Yann Landon, Manuel Paredes, Clément Chirol. Study of residual stress distribution near the hole edge in aeronautical structures after drilling EUROMAT 2017, Thessaloniki, GR [HAL] / [BIB]
2017 ACL Mahmoud Harzallah, Thomas Pottier, Johanna Senatore, Michel Mousseigne, Guénaël Germain, Yann Landon. Numerical and experimental investigations of Ti-6Al-4V chip generation and thermo-mechanical couplings in orthogonal cutting International Journal of Mechanical Sciences, Elsevier, 134, p.189-202 [HAL] / [BIB] / [DOI]
2017 ACL P. Rahme, Yann Landon, Frederic Lachaud, Robert Piquet, Pierre Lagarrigue. Drilling of thick composite materials using a step gundrill Composites Part A: Applied Science and Manufacturing, Elsevier, 103, p.304--313 [HAL] / [BIB]
2017 ACL Oleksii Shtehin, Vincent Wagner, Sébastien Seguy, Yann Landon, Gilles Dessein, Michel Mousseigne. Stability of ball-end milling on warped surface: semi-analytical and experimental analysis International Journal of Advanced Manufacturing Technology, Springer Verlag, 89(9-12), p.2557-2569 [HAL] / [BIB] / [DOI]
2016 COM Mahmoud Harzallah, Thomas Pottier, Johanna Senatore, Michel Mousseigne, G. Germain, Yann Landon. A New Behavior Model for Better Understanding of Titanium alloys Ti-6Al-4V Chip Formation in Orthogonal Cutting ESAFORM 2016 - 19th International ESAFORM Conference on Material Forming, 1769, art. 080015 - 6 p., Nantes, FR [HAL] / [BIB] / [DOI]
2016 COM V. Bonnot, Yann Landon, Stéphane Segonds. Tool/Material Interferences Sensibility to Process and Tool Parameters in Vibration- Assisted Drilling International Joint Conference on Mechanics, Design Engineering & Advanced Manufacturing JCM, Catania, Italy, Catane, IT [HAL] / [BIB]
2016 ACL Pierre Rahme, Yann Landon, Robert Piquet, Frederic Lachaud, Pierre Lagarrigue. Drilling analytical model of composite material with pilot hole Mechanics & Industry, EDP Sciences, 17(5), p.513 [HAL] / [BIB] / [DOI]
2016 ACL P. A. Rey, John Le Dref, Johanna Senatore, Yann Landon. Modelling of cutting forces in orbital drilling of titanium alloy Ti6Al4V International Journal of Machine Tools and Manufacture, 106, p.75--88 [HAL] / [BIB]
2016 ACL John Le Dref, Yann Landon, Gilles Dessein, Christine Espinosa. Modelling kinematics and cutting forces in vibration assisted drilling Mechanics & Industry, EDP Sciences, 17(3), p.1-10 [HAL] / [BIB] / [DOI]
2015 ACL Mathieu Ladonne, Mehdi Cherif, Yann Landon, Jean-Yves K’nevez, Olivier Cahuc, Côme de Castelbajac. Modelling the vibration-assisted drilling process: identification of influential phenomena International Journal of Advanced Manufacturing Technology, Springer Verlag, 81(9-12), p.1657-1666 [HAL] / [BIB]
2015 ACL P. Rahme, Yann Landon, Frederic Lachaud, Robert Piquet, Pierre Lagarrigue. Drilling of thick composite material with a small-diameter twist drill International Journal of Advanced Manufacturing Technology, Springer Verlag, 76(9-12), p.1543-1553 [HAL] / [BIB]
2015 COM M. Ladonne, M. Chérif, Yann Landon, J.-Y. K'Nevez, O. Cahuc, C. de Castelbajac. A Dynamic Modelling of Vibrations Assisted Drilling Productica 2015, Romania, May 29, 2015, 7(1), Bucarest, RO [HAL] / [BIB]
2015 ACL P. Rahme, Yann Landon, Frederic Lachaud, Robert Piquet, Pierre Lagarrigue. Delamination-free drilling of thick composite materials Composites Part A: Applied Science and Manufacturing, Elsevier, 72, p.148--159 [HAL] / [BIB]
2014 COM P. A. Rey, Johanna Senatore, Yann Landon. Characterization of the cutting phenomenon in orbital drilling of titanium alloys (TiAl6V4) 11th International Conference on High Speed Machining, Prague, CZ [HAL] / [BIB]
2014 COM P. Rahmé, Yann Landon, R. Piquet, Frederic Lachaud, Pierre Lagarrigue. Drilling of thick composite structures with pilot hole using a twist drill 16th European Conference on Composite Materials (ECCM16), Seville, Spain, June 22-26, 2014, Seville, ES [HAL] / [BIB]
2014 COM J. Le Dref, Yann Landon, G. Dessein, F. Blanchet. Thrust force and torque model applied to the vibratory drilling process Joint Conference on Mechanical, Design Engineering & Advanced Manufacturing, Toulouse, France, June 18-20, 2014, Toulouse, FR [HAL] / [BIB]
2014 COM J. Le Dref, Yann Landon, G. Dessein, Christine Espinosa. Contribution to understanding and modelizing vibration assisted drilling 4th ICEIR Int. Congress on Engineering of Industrial Risks & 32nd CMVA Annual Seminar on Machinery Vibration, Montréal, CA [HAL] / [BIB]
2014 ACL Mehdi Chérif, Christophe Bois, Yann Landon. Rôle des défauts de perçage sur le comportement en matage des composites stratifiés sous sollicitation de fatigue Revue des composites et des matériaux avancés = Journal of Composite and Advanced Materials, IIETA, 24(4), p.423--434 [HAL] / [BIB]
2014 COM P. Rahmé, Yann Landon, R. Piquet, Frederic Lachaud, Pierre Lagarrigue. Analytical model for drilling thick composite structures with pilot hole using a twist drill Joint Conference on Mechanical, Design Engineering & Advanced Manufacturing, Toulouse, France, June 18-20, 2014, Toulouse, FR [HAL] / [BIB]
2014 COM M. Ladonne, Yann Landon, M. Chérif, J.-Y. K'Nevez, O. Cahuc, C. de Castelbajac. A Dynamic Cutting Forces Model of Vibrations Assisted Drilling 32nd Machinery Vibration CMVA Annual Seminar – 4th International Congress on Engineering of Industrial Risks, Montreal, Canada, October 29-31, 2014, Montréal, CA [HAL] / [BIB]
2014 COM P. A. Rey, K. Moussaoui, Johanna Senatore, Yann Landon. Modelling of chip geometry in orbital drilling Joint Conference on Mechanical, Design Engineering & Advanced Manufacturing, Toulouse, France, June 18-20, 2014, p.502-508, Toulouse, FR [HAL] / [BIB]
2014 COM J. Le Dref, Yann Landon, G. Dessein. Thrust force and torque model applied to the vibration assisted drilling of Aluminium 7010 32nd Machinery Vibration CMVA Annual Seminar – 4th International Congress on Engineering of Industrial Risks, Montreal, Canada, October 29-31, 2014, Montréal, CA [HAL] / [BIB]
2013 ACL Yann Landon, Mehdi Cherif. Characterization of the Surface Quality of Holes Drilled in CFRP Laminates Advanced Materials Research, Trans Tech Publications, 698, p.107-116 [HAL] / [BIB] / [DOI]
2013 ACL Xavier Pessoles, Yann Landon, Stéphane Segonds, Walter Rubio. Optimisation of workpiece setup for continuous five-axis milling: application to a five-axis BC type machining centre International Journal of Advanced Manufacturing Technology, Springer Verlag, 65(1-4), p.67-79 [HAL] / [BIB] / [DOI]
2013 ACL Michel Mousseigne, Yann Landon, Sébastien Seguy, Gilles Dessein, Jean-Max Redonnet. Predicting the dynamic behaviour of torus milling tools when climb milling using the stability lobes theory International Journal of Machine Tools and Manufacture, Elsevier, 65, p.47-57 [HAL] / [BIB] / [DOI]
2013 COM M. Ladonne, Yann Landon, O. Cahuc, M. Chérif, J.-Y. K'Nevez, C. de Castelbajac. Dynamic Modeling of Vibrations Assisted Drilling 5th International Conference on Structural Analysis of Advanced Materials (ICSAAM), Island of Kos, Greece, September 23-26, 2013, Island of Kos, GR [HAL] / [BIB]
2013 ACL John Le Dref, Florent Eyma, Gilles Dessein, Louis Etienne Denaud, Yann Landon. Comparative study of tools in drilling composites T700-M21 and T800-M21 Advanced Materials Research, Trans Tech Publications, vol. 698, pp. 59-68 [HAL] / [BIB] / [DOI]
2012 INV Yann Landon. Manufacturing’21 : Expériences de fédération des activités de recherche en fabrication 13ème Colloque National AIP-PRIMECA – Démarche et Innovation dans la Conception et la Production des Systèmes Intégrés, Mont-Dore, FR [HAL] / [BIB]
2011 ACL Laurent Benezech, Yann Landon, Walter Rubio. Study of Manufacturing Defects and Tool Geometry Optimisation for Multi-Material Stack Drilling Advanced Materials Research, Trans Tech Publications, 423, p.1-11 [HAL] / [BIB] / [DOI]
2011 ACL Pierre Rahmé, Yann Landon, Frederic Lachaud, Robert Piquet, Pierre Lagarrigue. Analytical models of composite material drilling International Journal of Advanced Manufacturing Technology, Springer Verlag, 52(5-8), p.609-617 [HAL] / [BIB] / [DOI]
2011 ACL Pierre Rahmé, Yann Landon, Pierre Lagarrigue, Frederic Lachaud, Robert Piquet. Drilling thick composite materials using large diameter drills International Journal of Machining and Machinability of Materials, Inderscience, 10(3), p.202 [HAL] / [BIB] / [DOI]
2010 ACL Xavier Pessoles, Yann Landon, Walter Rubio. Kinematic modelling of a 3-axis NC machine tool in linear and circular interpolation International Journal of Advanced Manufacturing Technology, Springer Verlag, 47(5-8), p.639-655 [HAL] / [BIB] / [DOI]
2010 ACL Xavier Pessoles, Yann Landon, Michel Mousseigne, Walter Rubio. Simulation of the behaviour of CNC machine-tools in three-axis milling of sculptured surfaces International Journal of Machining and Machinability of Materials, Inderscience, 8(3/4), p.326 [HAL] / [BIB] / [DOI]
2009 COM X. Pessoles, Yann Landon, Walter Rubio, Jean-Max Redonnet. Dynamic model of CNC milling machines 3rd International Conference on Structural Analysis of Advanced Materials (ICSAAM), Tarbes, France, September 7-10, 2009, Tarbes, FR [HAL] / [BIB]
2008 ACL Johanna Senatore, Frederic Monies, Yann Landon, Walter Rubio. Optimising positioning of the axis of a milling cutter on an offset surface by geometric error minimisation Computer-Aided Design, Elsevier, 37(9-10), p.861-871 [HAL] / [BIB] / [DOI]
2008 ACL P. Rahme, Yann Landon, Pierre Lagarrigue, Frederic Lachaud, R. Piquet, B. Marguet, J. Bourriquet, C. Le Roy. Chisel Edge Effect on Delamination when Drilling Thick Composite Materials with a Twist Drill SAE Int. J. Aerosp., 1(1), p.776--781 [HAL] / [BIB] / [DOI]
2001 ACL François Villeneuve, Olivier Legoff, Yann Landon. Tolerancing for manufacturing: a three dimensional model International Journal of Production Research, Taylor & Francis, 39(8), pp. 1625-1648 [HAL] / [BIB]