Arthur Cantarel

Maître de conférence - Institut Universitaire de Technologie de Tarbes (IUT de Tarbes)
Membre du groupe Matériaux et Structures Composites (MSC)
IUT, 1 rue Lautréamont
65016 Tarbes
  arthur.cantarel@iut-tarbes.fr
    (recherche)
Activités de recherche :

– Mise en oeuvre, Modélisation et Simulation numérique des procédés d’élaboration des matériaux composites par voie liquide à différentes échelles.

– Modélisation et Caractérisation de la perméabilité des renforts fibreux.

– Cinétique de réaction des polymères couplée aux procédés (température, écoulement, …)

– Composites à matrice thermoplastique reactive

– Influence du procédé sur les propriétés mécaniques des matériaux composites.

– Caractérisation et contrôle des matériaux composites.

– Multi-matériaux à base de bois et éco-matériaux



Activités d'enseignement :

BUT Génie Mécanique et Productique

–  Mécanique : statique, cinématique, dynamique, énergétique, fluides ;

–  Dimensionnement des structures (DDS) ;

–  Sciences des matériaux (SDM) : Alliages métalliques, traitements, Matériaux composites, Céramiques ;

LP Innovation, Matériaux et Structures Composites (IMSC)

– Procédés de mise en oeuvre des matériaux composites

– CAO composites sur Catia

– Mise en oeuvre des matériaux composites : contact, pré-imprégnés, infusion ;

– Projets tutorés

Master

– Simulation numérique des procédés ;

– Procédés d’élaboration des matériaux composites.



Responsabilités collectives :

Responsable de la Licence Professionnelle Innovations, Matériaux et Structures Composites (IMSC)

Animateur de l’axe Matériaux Procédés Propriétés (MaPP) du groupe MSC de l’ICA



Production scientifique :
59 contributions trouvées

AnnéeTypeAuteurs et titre du documentLiens
2022 ACL William Han, Quentin Govignon, Arthur Cantarel, Fabrice Schmidt. Efficient polymerization and crystallization kinetics coupling of polyamide 6 synthesis for liquid composite molding process modeling Polymer Engineering and Science, Wiley-Blackwell, 62(4), p.999-1012 [HAL] / [BIB] / [DOI]
2021 ACL Romain Guélou, Florent Eyma, Arthur Cantarel, Samuel Rivallant, Bruno Castanié. Dynamic crushing of wood-based sandwich composite tubes Mechanics of Advanced Materials and Structures, Taylor & Francis, p.1-21 [HAL] / [BIB] / [DOI]
2021 ACL R. Guélou, Florent Eyma, Arthur Cantarel, Samuel Rivallant, Bruno Castanié. Static crushing of wood based sandwich composite tubes Composite Structures, Elsevier, 273, p.114317 [HAL] / [BIB] / [DOI]
2021 COM Romain Guélou, Florent Eyma, Arthur Cantarel, Bruno Castanié, Samuel Rivallant. Caractérisation de tubes sandwichs bois-carbone pour des applications de crash. Characterization of wood and carbon sandwich tubes for crash applications JNC 22 – Conférence virtuelle – 28 - 30 juin 2021, Besancon, FR [HAL] / [BIB]
2021 COM Bruno Castanié, Romain Guélou, Arthur Cantarel, Samuel Rivallant, Florent Eyma. Wood as a structural material for transportation industry: Past example and recent advances 24th International Conference on Composite Structures Faculty of Engineering, University of Porto, Portugal, Porto, PT [HAL] / [BIB]
2021 COM William Han, Quentin Govignon, Arthur Cantarel, Cédric Samuel, Fabrice Schmidt. Modeling the reactive PA6 flow for LCM processes ESAFORM 2021 - 24th International Conference on Material Forming, En ligne, BE [HAL] / [BIB] / [DOI]
2021 ACL R. Guélou, Florent Eyma, Arthur Cantarel, Samuel Rivallant, Bruno Castanié. Crashworthiness of poplar wood veneer tubes International Journal of Impact Engineering, Elsevier, 147, p.103738 [HAL] / [BIB] / [DOI]
2019 ACL John Susainathan, Florent Eyma, Emmanuel de Luycker, Arthur Cantarel, Christophe Bouvet, Bruno Castanié. Experimental investigation of compression and compression after impact of wood-based sandwich structures Composite Structures, Elsevier, 220, p.236-249 [HAL] / [BIB] / [DOI]
2019 COM Romain Guélou, Florent Eyma, Arthur Cantarel, Bruno Castanié, Christophe Bouvet, John Susainathan. Développement et caractérisation d'éco-structures composites à base de bois. Development and characterization of wood based eco-structures composites 21ème Journées Nationales sur les Composites, Bordeaux, Talence, FR [HAL] / [BIB]
2019 ACL John Susainathan, Florent Eyma, Emmanuel de Luycker, Arthur Cantarel, Bruno Castanié. Numerical modeling of impact on wood-based sandwich structures Mechanics of Advanced Materials and Structures, Taylor & Francis [HAL] / [BIB] / [DOI]
2019 ACL Shahriar Bakrani Balani, France Chabert, Valérie Nassiet, Arthur Cantarel. Influence of printing parameters on the stability of deposited beads in fused filament fabrication of poly(lactic) acid Additive Manufacturing, Elsevier, 25, p.112-121 [HAL] / [BIB]
2019 ACL Céline Vicard, Olivier de Almeida, Arthur Cantarel, Gérard Bernhart. Modeling of the polymerization and crystallization kinetic coupling of polyamide 6 synthesized from ε-caprolactam Polymer, Elsevier, 180, p.121681 [HAL] / [BIB] / [DOI]
2019 ACL Shahriar Bakrani Balani, France Chabert, Valérie Nassiet, Arthur Cantarel. Influence of the printing parameters on the stability of the deposited beads in fused filament fabrication of poly(lactic) acid Additive Manufacturing, Elsevier, 25, p.112-121 [HAL] / [BIB] / [DOI]
2018 ACL Chen Li, Arthur Cantarel, Xiaojing Gong. Influence of structural parameters at microscale on the fiber reinforcement Journal of Composite Materials, SAGE Publications, 53(7), p.863-872 [HAL] / [BIB] / [DOI]
2018 COM John Susainathan, Florent Eyma, Emmanuel de Luycker, Arthur Cantarel, Bruno Castanié. WOOD-BASED COMPOSITE SANDWICH STRUCTURES ECCM18 - 18th European Conference on Composite Materials, p.24 - 28, Athènes, GR [HAL] / [BIB]
2018 COM Shahriar Bakrani Balani, Arthur Cantarel, France Chabert, Valérie Nassiet. Influence of parameters controlling the extrusion step in fused filament fabrication (FFF) process applied to polymers using numerical simulation ESAFORM 2018, 1960, p.140003-1-140003-6, Palermo, IT [HAL] / [BIB] / [DOI]
2018 COM Matthias Barus, Hélène Welemane, Valérie Nassiet, Marie-Laetitia Pastor, Arthur Cantarel, Francis Collombet, Laurent Crouzeix, Jean-Christophe Batsale. Optimization of thermal joint behaviour for the detection of bonding defects by infrared thermography PhotoMechanics 2018, Toulouse, FR [HAL] / [BIB]
2018 COM Jean Gulla, Arthur Cantarel, Marie-Laetitia Pastor, Xiaojing Gong. One shot sandwich composite structure by LRI, influence of manufacturing process parameters on low velocity impact FPCM 14, Lulea, SE [HAL] / [BIB]
2018 ACL John Susainathan, Florent Eyma, Emmanuel de Luycker, Arthur Cantarel, Bruno Castanié. Experimental investigation of impact behavior of wood-based sandwich structures Composites Part A: Applied Science and Manufacturing, Elsevier, vol. 109, pp. 10-19 [HAL] / [BIB] / [DOI]
2018 ACL Céline Vicard, Olivier de Almeida, Arthur Cantarel, Gérard Bernhart. Diagramme TTT isotherme de la polymérisation anionique du PA6 à partir de l'epsilon-caprolactame Revue des composites et des matériaux avancés = Journal of Composite and Advanced Materials, IIETA, 28(1), p.89-110 [HAL] / [BIB] / [DOI]
2018 ACL Matthias Barus, Hélène Welemane, Valérie Nassiet, Marie-Laetitia Pastor, Arthur Cantarel, Francis Collombet, Laurent Crouzeix, Yves-Henri Grunevald. NDT-based design of joint material for the detection of bonding defects by infrared thermography NDT & E International, Elsevier, 93, p.157-163 [HAL] / [BIB] / [DOI]
2017 ACL Céline Vicard, Olivier de Almeida, Arthur Cantarel, Gérard Bernhart. Experimental study of polymerization and crystallization kinetics of polyamide 6 obtained by anionic ring opening polymerization of ε-caprolactam Polymer, Elsevier, 132, p.88 - 97 [HAL] / [BIB] / [DOI]
2017 COM Matthias Barus, Hélène Welemane, Valérie Nassiet, Marie-Laetitia Pastor, Arthur Cantarel, Francis Collombet, Laurent Crouzeix, Yves-Henri Grunevald. Analyse de réparations collées par thermographie InfraRouge Optimisation de la réponse thermique du joint structural GDR week du GDR CNRS 3671 MIC, Talence, FR [HAL] / [BIB]
2017 COM Benjamin Valès, Victor Alfonso Munoz Cuartas, Hélène Welemane, Marie-Laetitia Pastor, Baptiste Trajin, Marianne Perrin, Arthur Cantarel, Moussa Karama. Thermographic investigation of heat source in transversely isotropic composites International Conference on Structural Analysis of Advanced Materials (ICSAAM 2017), p.030043-1, Bucarest, RO [HAL] / [BIB]
2017 COM Céline Vicard, Olivier de Almeida, Arthur Cantarel, Gérard Bernhart. TTT diagram of the anionic polymerization PA6 from ε-Caprolactam ICCM 21 - 21th International Conference on Composite Materials, 10 p., Xi'an, CN [HAL] / [BIB]
2017 COM Céline Vicard, Olivier de Almeida, Arthur Cantarel, Gérard Bernhart. Diagramme TTT de la polymérisation anionique du PA6 à partir de l'ε-caprolactame et influence des fibres sur les cinétiques JNC 20 - Journées Nationales sur les Composites 2017, Champs-sur-Marne, FR [HAL] / [BIB]
2017 COM Shahriar Bakrani Balani, France Chabert, Valérie Nassiet, Arthur Cantarel, Christian Garnier. Toward improvement of the properties of parts manufactured by FFF ( Fused Filament Fabrication) through understanding the influence of temperature and rheological behaviour on the coalescence phenomenon ESAFORM 2017, pp. 040008, Dublin, IE [HAL] / [BIB]
2017 COM C. Li, Arthur Cantarel, Xiaojing Gong, D. Liang. Numerical Simulation of Infusion at Microscale Permeability Calculation 21th International Conference on Composite Materials 2017 (ICCM-21), 11 pages, Xi'an, CN [HAL] / [BIB]
2017 COM Jean Gulla, Arthur Cantarel, Marie-Laetitia Pastor, Xiaojing Gong. One Shot Sandwich Composite Structure by Liquid Resin Infusion: Influence of Manufacturing Process Parameters on Low Velocity Impact 20th International Conference on Composite Structures, paris, FR [HAL] / [BIB]
2017 ACL M.-Q. Thai, Fabrice Schmidt, Gilles Dusserre, Arthur Cantarel, L. Silva. BEM computation of 3D Stokes flow including moving front International Journal of Material Forming, Springer Verlag, 10(4), p.567-580 [HAL] / [BIB] / [DOI]
2017 ACL Matthias Barus, Hélène Welemane, Francis Collombet, Marie-Laetitia Pastor, Arthur Cantarel, Laurent Crouzeix, Yves-Henri Grunevald, Valérie Nassiet. Bonded repair issues for composites: An investigation approach based on infrared thermography NDT & E International, Elsevier, 85, p.27-33 [HAL] / [BIB] / [DOI]
2017 COM J. Gulla, Arthur Cantarel, Marie-Laetitia Pastor, Xiaojing Gong. One Shot Sandwich Composite Structure by Liquid Resin Infusion: Influence of Manufacturing Process Parameters on Low Velocity Impact ICCS 2017, Zürich, CH [HAL] / [BIB]
2017 ACL John Susainathan, Florent Eyma, Emmanuel de Luycker, Arthur Cantarel, Bruno Castanié. Manufacturing and quasi-static bending behavior of wood-based sandwich structures. Composite Structures, Elsevier, 182, p.487-504 [HAL] / [BIB] / [DOI]
2017 COM Jean Gulla, Arthur Cantarel, Marie-Laetitia Pastor, Xiaojing Gong. One Shot Sandwich Composite Structure by Liquid Resin Infusion: Influence of Manufacturing Process Parameters on Low Velocity Impact Chinese-Franco Symposium, Tarbes, FR [HAL] / [BIB]
2016 COM Matthias Barus, Hélène Welemane, Francis Collombet, Marie-Laetitia Pastor, Arthur Cantarel, Valérie Nassiet, Laurent Crouzeix, Yves-Henri Grunevald. A New NDT Method for the study of composite bonded repair 17th European Conference on Composite Materials (ECCM17), Munich, DE [HAL] / [BIB]
2016 COM John Susainathan, Florent Eyma, Emmanuel de Luycker, Arthur Cantarel, Bruno Castanié. IMPACT BEHAVIOR OF WOOD-BASED SANDWICH STRUCTURES International Conference on Sandwich Structures, Floride, US [HAL] / [BIB]
2016 COM Jean Gulla, Arthur Cantarel, Marie-Laetitia Pastor, Xiaojing Gong. Système de Transport de Mortiers lors de Raids d’Artillerie Héliportés CNRIUT 2016 – Congrès National de la Recherche en IUT, Nantes, FR [HAL] / [BIB]
2016 ACL Benjamin Vales, Victor Munoz Cuartas, Hélène Welemane, Marie-Laetitia Pastor, Baptiste Trajin, Marianne Perrin, Arthur Cantarel, Moussa Karama. Heat source estimation in anisotropic materials Composite Structures, Elsevier, 136, p.287-296 [HAL] / [BIB] / [DOI]
2016 COM J.P. Susainathan, Florent Eyma, Emmanuel de Luycker, Arthur Cantarel, Bruno Castanié. Experimental investigation on impact behaviour of wood-based sandwich structures Proceedings of 1st International Conference on Impact Loading of Structures and Materials (ICILSM 2016), Turin, IT [HAL] / [BIB]
2016 ACL Victor Munoz, Benjamin Vales, Marianne Perrin, Marie-Laetitia Pastor, Hélène Welemane, Arthur Cantarel, Moussa Karama. Damage detection in CFRP by coupling acoustic emission and infrared thermography Composites Part B: Engineering, Elsevier, 85, p.68-75 [HAL] / [BIB] / [DOI]
2015 COM Matthias Barus, Francis Collombet, Hélène Welemane, Laurent Crouzeix, Arthur Cantarel, Yves-Henri Grunevald, Valérie Nassiet, Marie-Laetitia Pastor. Infrared signatures of bonded interfaces for the repair of primary structures in composite materials 20th International Conference on Composite Materials, Copenhague, DK [HAL] / [BIB]
2015 COM V. Munoz, Marianne Perrin, Marie-Laetitia Pastor, H. Welemane, Arthur Cantarel, M. Karama. Identification de mécanismes d'endommagement de stratifiés carbone/époxy par couplage entre émission acoustique et thermographie infrarouge Journées Scientifiques et techniques, Cachan, France, 12 mars 2015, Cachan, FR [HAL] / [BIB]
2014 COM Victor Munoz Cuartas, Marianne Perrin, Marie-Laetitia Pastor, Hã©lã¨ne Welemane, Arthur Cantarel, Moussa Karama. Utilisation de la thermographie infrarouge et de l'émission acoustique pour l'identification de l'endommagement d'un composite stratifié carbone-époxy VIIIèmes Journées d'Etudes Techniques - International congress for applied mechanics JET 2014, Marrakech, MA [HAL] / [BIB]
2014 COM Victor Munoz Cuartas, Marianne Perrin, Marie-Laetitia Pastor, Hélène Welemane, Arthur Cantarel, Moussa Karama. Identification of the elastic properties in CFRP composites International Symposium on Aircraft Materials ACMA 2014, pp. 61-62, Marrakech, MA [HAL] / [BIB]
2014 COM V. Munoz, B. Vales, Marianne Perrin, Marie-Laetitia Pastor, H. Welemane, Arthur Cantarel, M. Karama. Coupling infrared termography and acoustic emission for damage study in CFRP Qirt 2014, the 12th International Conference on Quantitative Infrared Thermography, France, Bordeaux, FR [HAL] / [BIB]
2014 COM V. Munoz, Marianne Perrin, Marie-Laetitia Pastor, H. Welemane, Arthur Cantarel, M. Karama. Identification de mécanismes d’endommagement de stratifiés carbone/époxy par émission acoustique CILSA - Journées Instrumentation, traitement du signal et modélisation des sources acoustiques dans les matériaux composites, Lyon, FR [HAL] / [BIB]
2014 ACL Victor Munoz Cuartas, Marianne Perrin, Marie-Laetitia Pastor, Hélène Welemane, Arthur Cantarel, Moussa Karama. Determination of the elastic properties in CFRP composites: comparison of different approaches based on tensile tests and ultrasonic characterization Advances in Aircraft and Spacecraft Science, Techno-Press, vol. 2(n° 3), pp. 249-260 [HAL] / [BIB] / [DOI]
2014 COM M.Q. Thai, Fabrice Schmidt, Gilles Dusserre, Arthur Cantarel, L. Silva. Micro-scale modeling of resin flow by BEM- Permeability computation International conference on COmputational methods in Manufacturing Processes, Saint-Etienne, FR [HAL] / [BIB]
2013 ACL Victor Munoz, Marianne Perrin, Marie-Laetitia Pastor, Hélène Welemane, Arthur Cantarel, Moussa Karama. Application of non destructive testing to the detection of aeronautical defects in composite structure Nonconventional Technologies Review [HAL] / [BIB]
2013 COM Victor Munoz Cuartas, Marianne Perrin, Marie-Laetitia Pastor, Hélène Welemane, Arthur Cantarel, Moussa Karama. Identification of the elastic properties of composite materials International Conference on Structural Analysis of Advanced Materials, ile de Kos, GR [HAL] / [BIB]
2013 ACL Renaud Gantois, Arthur Cantarel, Benoit Cosson, Gilles Dusserre, Jean-Noël Felices, Fabrice Schmidt. BEM-based models to simulate the resin flow at macroscale and microscale in LCM processes Polymer Composites, Wiley, 34(8), p.1235-1244 [HAL] / [BIB] / [DOI]
2013 COM Victor Munoz Cuartas, Marianne Perrin, Marie-Laetitia Pastor, Hélène Welemane, Arthur Cantarel, Moussa Karama. Application of non destructive testing to the detection of aeronautical defects in composite structures International Conference of Nonconventional Technologies, Sibiu, RO [HAL] / [BIB]
2011 ACL Renaud Gantois, Arthur Cantarel, Gilles Dusserre, Jean Noel Félices, Fabrice Schmidt. Mold Filling Simulation of Resin Transfer Molding Combining BEM and Level Set Method Applied Mechanics and Materials, Trans Tech Publications, 62, p.57-65 [HAL] / [BIB] / [DOI]
2010 COM Renaud Gantois, Arthur Cantarel, Gilles Dusserre, Jean-Noël Felices, Fabrice Schmidt. Mold filling simulation of resin transfer molding combining BEM and level set method ACMA 2010 -International symposium on composites and aircraft materials, 8 p., Marrakech, MA [HAL] / [BIB]
2010 COM Renaud Gantois, Arthur Cantarel, Gilles Dusserre, Jean-Noël Felices, Fabrice Schmidt. Numerical simulation of resin transfer molding using BEM and level set method ESAFORM 2010 -13th International ESAFORM conference on material forming, 4 p., Brescia, IT [HAL] / [BIB]
2010 ACL R. Gantois, Arthur Cantarel, Gilles Dusserre, Jean-Noël Felices, Fabrice Schmidt. Numerical simulation of resin transfer molding using BEM and level set method International Journal of Material Forming, Springer Verlag, 3(Supp 1), p.635-638 [HAL] / [BIB] / [DOI]
2009 COM Renaud Gantois, Arthur Cantarel, Jean-Noël Felices, Nicolas Pirc, Fabrice Schmidt. BEM simulation of 3D updated resin front for LCM processes ICSAAM 2009 -International Conference on Structural Analysis of Advanced Materials, p.131-136, Tarbes, FR [HAL] / [BIB]
2009 COM R. Gantois, Arthur Cantarel, Jean-Noël Felices, Nicolas Pirc, Fabrice Schmidt. BEM Simulation Of 3D Updated Resin Front For LCM Processes ICSAAM 2009 - International Conference on Structural Analysis of Advanced Materials, 446, p.131-136, Tarbes, FR [HAL] / [BIB] / [DOI]
2009 ACL Arthur Cantarel, Eric Lacoste, Corine Arvieu, Olivier Mantaux, Michel Danis. Numerical simulation of segregation phenomena coupled with phase change and fluid flow : application to metal matrix composites processing Numerical Heat Transfer Applications, 55(9), p.880-892 [HAL] / [BIB] / [DOI]