Adriana Soveja

Maître de conférence (HDR) - Université Toulouse 2 - Jean Jaurès (UT2 - Jean Jaurès)
Membre du groupe Surfaces, Usinages, Matériaux et Outillages (SUMO)
BR2 035, Espace Clément Ader, 3 rue Caroline Aigle
31400 Toulouse
 
    (recherche)
    (enseignement)
Activités de recherche :

Domaine de recherche:
– modélisation du comportement thermomécanique,
– analyse et simulation du transfert thermique interfacial
Doctorat:
Modélisation du processus de texturation par faisceau laser : approches expérimentale et numérique, Laboratoire Interdisciplinaire Carnot Bourgogne (ICB) –  UMR5209 CNRS, Université de Bourgogne, doctorat mécanique – énergétique
Post-doctorat:
Densification par laser des dépôts de polymères (PEEK) élaborés par projection flamme, Laboratoire d'Études et de Recherches sur les Matériaux, les Procédés et les Surfaces (LERMPS), Université de Technologie de Belfort – Montbéliard



Activités d'enseignement :

à  l’IUT Blagnac:
Niveau DUT:
– Sciences des Matériaux
– Contrôles Non-Destructif des Matériaux
– Thermique et Thermodynamique
– Technologie et Maintenance des Système de Transmission de Puissance
Niveau LP:
– Structures et Propriétés des Matériaux utilisé dans l’aéronautique



Responsabilités collectives :
  • Responsable Projets Tuteurés GIM2 et LPMA de 09/2009 à 08/2015
  • Responsable pédagogique de la Licence Professionnelle Maintenance Aéronautique – LPMA de l’UT2J – IUT  Blagnac depuis 09/2015
  • Membre élu du CSQ 60,61,63 UT2J depuis septembre 2010
  • Membre élu du Conseil de l’IUT Blagnac de 10/2013 à 10/2017
  • Membre élu du Conseil du Département Génie Industriel et Maintenance de 11/2009 à 10/2013 et de 11/2017 à 10/2021


Autre :

Co-encadrement thèse:

Ahmed ZOUAGHI, Effet de l’usinage et du transfert thermique sur le comportement thermo-mécanique des outillages de mise en forme, Ecole de Mines d’Albi – ISAE, ED MEGeP, Spécialité Génie Mécanique, Mécanique des Matériaux (11/2011 – 10/2014)

 



Production scientifique :
20 contributions trouvées

AnnéeTypeAuteurs et titre du documentLiens
2023 COM Amaury Jacquot, Adriana Soveja, Yannick Le Maoult, Christine Boher, Manuel Marcoux. Apport des caractérisations thermiques et thermo-optiques pour le renforcement du lien essais-calculs en fabrication additive SLM SFT 2023 - 31éme Congrès Français de Thermique 2023, p.257-266, Valenciennes, FR [HAL] / [BIB] / [DOI]
2023 ACL Christine Boher, Tarek Younsi, Adriana Soveja, Michel Chaussumier. Influence of iron dilution on plastic deformation mechanisms in cobalt-based alloys: Consequence of phase transformations on tribological behavior Wear, Elsevier, 524-525, p.204845 [HAL] / [BIB] / [DOI]
2022 ACL Tarek Younsi, Christine Boher, Adriana Soveja. Influence of Interlayer Time on the Microstructural State of CoCrMo Coatings Applied by Selective Laser Melting on an Iron-based Substrate for Different Numbers of Layers Materials Today Communications, Elsevier, 32, p.103776 [HAL] / [BIB] / [DOI]
2021 COM Adriana Soveja, André Péninou, Adrien van den Bossche, Thierry Val, Thierry Alhalel. Etudes énergétiques des parois rayonnantes réalisées en brique HELIOTERRE Congrès National de la Recherche des IUT (CNRIUT 2021), Lyon (en ligne), FR [HAL] / [BIB]
2019 ACL Xiaohu Chen, Pingze Zhang, Dongbo Wei, Xiao Huang, Adriana Soveja, Michel Chaussumier, Feng Ding, Fengkun Li. Structures and properties of Ti-5Al-5Mo-5V-1Cr-1Fe after Nb implantation Surface and Coatings Technology, Elsevier [HAL] / [BIB] / [DOI]
2018 ACL Xiahu Chen, Adriana Soveja, Michel Chaussumier, Pingze Zhang, Dongbo Wei, Feng Ding. Effect of MEVVA ion implantation on fatigue properties of TC18 titanium alloy Surface and Coatings Technology, Elsevier, 344(25), p.572--578 [HAL] / [BIB] / [DOI]
2016 COM A. Zouaghi, Vincent Velay, Adriana Soveja, Farhad Rezai-Aria, Thomas Pottier, Mohammed Cheikh. Multi-scale Modelling of the Surface Behaviour of AISI H11 Tool Steels TOOL 2016 - 10th TOOL Conference, 562 p., Bratislava, SK [HAL] / [BIB]
2016 ACL Ahmed Zouaghi, Vincent Velay, Adriana Soveja, Thomas Pottier, Mohammed Cheikh, Farhad Rezai-Aria. A multi-scale approach to investigate the non linear subsurface behavior and strain localization of X38CrMoV5-1 martensitic tool steel: experiment and numerical analysis International Journal of Plasticity, Elsevier, 87, p.130-153 [HAL] / [BIB] / [DOI]
2016 COM Elizabeth Bougeois, Eric Campo, Adriana Soveja, Patricia Stolf, Thierry Val, Adrien van den Bossche. Usage pluridisciplinaire de la plate-forme Maison Intelligente de Blagnac Congrès National de la Recherche des IUT (CNRIUT 2016), Nantes, FR [HAL] / [BIB]
2016 COM A. Zouaghi, Adriana Soveja, Farhad Rezai-Aria, Thomas Pottier, Mohammed Cheikh, Vincent Velay. Multi-scale surface modeling of the nonlinear mechanical behaviour of AISI H11 hot work tool steel International Conference on Plasticity, Damage, and Fracture, Panama City, PA [HAL] / [BIB]
2014 COM Ahmed Zouaghi, Vincent Velay, Adriana Soveja, Farhad Rezai-Aria. A numerical investigation on the heterogeneous and anisotropic mechanical behaviour of AISI H11 steel using various stress-strain formulations : a multi-scale approach WCCM - 11th World Congress on Computational Mechanics / ECCM - 5th European Conference on Computational Mechanics / ECFD - 6th European Conference on Computational Fluid Dynamics, p. 3415-3425, Barcelone, ES [HAL] / [BIB]
2014 COM Ahmed Zouaghi, Vincent Velay, Adriana Soveja, Farhad Rezai-Aria. Multi-scale modelling of AISI H11 martensitic tool steel surface anisotropic mechanical behaviour FDMD II - JIP 2014 - FATIGUE DESIGN & MATERIAL DEFECTS, 12, art. 04018 - 2 p., Paris, FR [HAL] / [BIB] / [DOI]
2013 ACL Elizabeth Bougeois, Adrien van den Bossche, Nicolas Cazenave, Laurence Redon, Adriana Soveja, Thierry Val, Thierry Villemur. Projet CANet : un système de suivi de personnes à mobilité réduite grâce à leur canne de marche Magazine des IUT de France, pp. 1-4 [HAL] / [BIB]
2013 P A. Zouaghi, Vincent Velay, Adriana Soveja, R. Chieragatti, Farhad Rezai-Aria. Une étude multi-échelle du comportement en surface de l´acier X38CrMoV5 : approche numérique et expérimentale 21ème CONGRÉS FRANÇAIS DE MÉCANIQUE [CFM2013], Bordeaux, FR [HAL] / [BIB]
2012 ACL Camelia Demian, Sophie Costil, Pierre Sallamand, Adriana Soveja, Hanlin Liao, Simone Mattei. Laser densification of organic coating: Effects of laser wavelength, operating parameters and substrate properties Surface and Coatings Technology, Elsevier, 206, p.3526--3533 [HAL] / [BIB] / [DOI]
2010 ACL Adriana Soveja, S. Costil, H. Liao, Pierre Sallamand, C. Coddet. Remelting of Flame Spraying PEEK Coating Using Lasers Journal of Thermal Spray Technology, ASM International/Springer, 19(1-2), p.439-447 [HAL] / [BIB] / [DOI]
2008 ACL Adriana Soveja, Eugen Cicala, Dominique Grevey, Jean-Marie Jouvard. Optimisation of TA6V alloy surface laser texturing using an experimental design approach Optics and Lasers in Engineering, Elsevier, 46, p. 671– 678 [HAL] / [BIB] / [DOI]
2008 ACL E. Cicala, Adriana Soveja, Pierre Sallamand, Dominique Grevey, J.-M. Jouvard. The application of the random balance method in laser machining of metals Journal of Materials Processing Technology, Elsevier, 196(1-3), p.393-401 [HAL] / [BIB] / [DOI]
2007 PhD Adriana Soveja. Modélisation du processus de texturation par faisceau laser : approches expérimentale et numérique. Modelling of laser beam texturing process: experimental and numerical approaches [HAL] / [BIB]
2007 COM Jean-Marie Jouvard, Adriana Soveja, Luc Lavisse. Traitement de surface métallique induit par faisceau laser Nd:YAG Q-switch de marquage : modélisation d'un impact laser JITH 2007, 5p., Albi, FR [HAL] / [BIB]