2024 |
Patrice Longère. Consistent Modeling of Thermo-Viscoplasticity for High-Speed Processes
Lecture Notes in Mechanical Engineering, Springer, ICTP 2023 - Volume 4, p.498-508
| [HAL] / [BIB] / [DOI] |
2024 |
Shiqi Wang, Ahmad Batikh, Lucien Baldas, Azeddine Kourta, Nicolas Mazellier, Stéphane Colin, Stéphane Orieux. Computational and experimental study of the synchronization strategies of two pulsing jet fluidic oscillators
Sensors and Actuators A: Physical, Elsevier, 369, 115165 (14 pp.)
| [HAL] / [BIB] / [DOI] |
2024 |
Jadran Čarija, Eduard Marenić, Tomislav Jarak, Mijo Nikolić. Discrete Lattice Element Model for Fracture Propagation with Improved Elastic Response
Applied Sciences, Multidisciplinary digital publishing institute (MDPI), 14(3), p.1287
| [HAL] / [BIB] / [DOI] |
2024 |
Fanny Gant, Gabriel Seisson, Patrice Longère, Skander El Mai, Jean-Luc Zinszner. High strain rate responses of some metals and alloys using a plate impact driven ring expansion test (PIDRET)
International Journal of Impact Engineering, Elsevier, 184, p.104829
| [HAL] / [BIB] / [DOI] |
2024 |
Bruno Castanié, Jean-Charles Passieux, Jean-Noël Périé, Christophe Bouvet, John-Eric Dufour, Joël Serra. Multiaxial loading of aeronautic composite structures at intermediate scale: A review of VERTEX developments
Composites Part C: Open Access, Elsevier, p.100439
| [HAL] / [BIB] / [DOI] |
2024 |
B. Castanié, A. Peignon, C. Marc, F. Eyma, A. Cantarel, Joël Serra, R. Curti, H. Hadiji, L. Denaud, S. Girardon, B. Marcon. Wood and Plywood as eco-materials for sustainable mobility:a review
Composite Structures, Elsevier, p.117790
| [HAL] / [BIB] / [DOI] |
2024 |
Lanhui Lin, Benoît Vieille, Christophe Bouvet. About the influence of a thermal aggression on the tensile behaviour of hybrid PEEK thermoplastic laminates
Composite Structures, Elsevier, p.117945
| [HAL] / [BIB] / [DOI] |
2024 |
Hugo Roirand, Alessandro Pugliara, Benoit Malard, Anis Hor, Nicolas Saintier. Multiscale study of additively manufactured 316 L microstructure sensitivity to heat treatment over a wide temperature range
Materials Characterization, Elsevier, 208, p.113603
| [HAL] / [BIB] / [DOI] |
2024 |
T. Hirschler, Robin Bouclier, P. Antolin, Annalisa Buffa. Reduced order modeling based inexact FETI‐DP solver for lattice structures
International Journal for Numerical Methods in Engineering, Wiley
| [HAL] / [BIB] / [DOI] |
2024 |
Vincent Proulx-Cabana, Guilhem Michon, Eric Laurendeau. Parametrization Effects of the Non-Linear Unsteady Vortex Method with Vortex Particle Method for Small Rotor Aerodynamics
Fluids, MDPI, 9(1), p.24
| [HAL] / [BIB] / [DOI] |
2024 |
Florent Grotto, Oscar Peta, Christophe Bouvet, Bruno Castanié, Joël Serra. Testing Structural Elements under Multiaxial Loading: A Numerical Model of the Bench to Understand and Predict Complex Boundary Conditions
Aerospace, MDPI, 11(1), p.68
| [HAL] / [BIB] / [DOI] |
2024 |
Minh-Nhat To, Eric Paroissien, Frédéric Lachaud, Valérie Nassiet, Bouchra Hassoune, Maëlenn Aufray, Hélène Welemane. Load transfer distribution in bolted-sealed joints
Journal of Adhesion, Taylor & Francis
| [HAL] / [BIB] / [DOI] |
2024 |
K. Cavé, D. Texier, S. Vallot, N. Chanfreau, E. Fessler, M. Dehmas, Daniel Monceau, Dominique Poquillon. Effect of creep loading on the oxygen diffusion of Ti6242S at 650°C
Scripta Materialia, Elsevier, 238, p.115748
| [HAL] / [BIB] / [DOI] |
2024 |
Georges Saliba, Thierry Camps, Vincent Raimbault, Lucien Baldas. Fabrication of high-frequency microfluidic oscillators with integrated thermal instrumentation
Sensors and Actuators A: Physical, Elsevier, 365, p.114844
| [HAL] / [BIB] / [DOI] |
2024 |
Paul Saves, Rémi Lafage, Nathalie Bartoli, Youssef Diouane, Jasper Bussemaker, Thierry Lefebvre, John T Hwang, Joseph Morlier, Joaquim R.R.A. Martins. SMT 2.0: A Surrogate Modeling Toolbox with a focus on hierarchical and mixed variables Gaussian processes. SMT 2.0 : Une boîte à outils pour modèles de substitution axée sur les processus gaussiens hiérarchiques et à variables mixtes
Advances in Engineering Software, Elsevier, 188(103571), p.103571
| [HAL] / [BIB] / [DOI] |
2024 |
Isacco Mazo, Miguel Monclus, Jon Molina-Aldareguia, Vincenzo Sglavo. Fracture resistance of binderless tungsten carbide consolidated by spark plasma sintering and flash sintering
Open Ceramics, Elsevier, 17, p.100533
| [HAL] / [BIB] / [DOI] |
2024 |
Sébastien Schwartz, Eric Paroissien, Frédéric Lachaud. An enriched finite element for the simplified stress analysis of an entire bonded overlap: continuum macro-element
International Journal of Adhesion and Adhesives, Elsevier, 129
| [HAL] / [BIB] |
2024 |
Irvin Séchepée, Clara Dubray, Vincent Velay, Hiroaki Matsumoto. Effects of grain size and β fraction on the deformation modes of a Ti-6Al-2Sn-4Zr-2Mo-Si alloy with equiaxed (α + β) microstructures: Slip trace analysis and multiscale simulation of polycrystal plasticity
Journal of Alloys and Compounds, Elsevier, 981, p.173722
| [HAL] / [BIB] / [DOI] |
2024 |
H. Hadiji, J. Serra, R. Curti, D. Gebrehiwot, Bruno Castanié. Characterization of mode II delamination behaviour of poplar plywood and LVL
Theoretical and Applied Fracture Mechanics, Elsevier, p.104354
| [HAL] / [BIB] / [DOI] |
2024 |
R.L. Black, D. Anjaria, J. Genée, Valery Valle, J.C. Stinville. Micro-Strain and Cyclic Slip Accumulation in a Polycrystalline Nickel-Based Superalloy
Acta Materialia, Elsevier, 266, p.119657
| [HAL] / [BIB] / [DOI] |
2024 |
Velibor Došljak, Igor Jovančević, Jean-José Orteu. Domain shared features for visual inspection of complex mechanical assemblies based on synthetically generated data
Journal of Electronic Imaging, SPIE and IS&T, 33(03), p.031205
| [HAL] / [BIB] / [DOI] |
2024 |
Huikangyue Bao, Philippe Marguerès, Philippe Olivier. An innovative and low-cost system for in situ and real-time cure monitoring using electrical impedancemetry for thermoset and CFRP laminate
Measurement Science and Technology, IOP Publishing, 35(3), p.035603
| [HAL] / [BIB] / [DOI] |
2024 |
Philippe Blais, Lotfi Toubal, Redouane Zitoune. The influence of the hole-generation process on fatigue response of open-hole and assembled titanium samples
Journal of Manufacturing Processes, Society of Manufacturing Engineers, 110, p.412-423
| [HAL] / [BIB] / [DOI] |
2024 |
Antonio Di Rienzo, Edouard Duriez, Miguel Charlotte, Joseph Morlier. Lightweighting structures using an explicit microarchitectured material framework
EDP Sciences, 25(7)
| [HAL] / [BIB] / [DOI] |
2024 |
Yuan Wu, Marianne Perrin, Marie-Laetitia Pastor, Pascal Casari, Xiaojing Gong. Moisture Effects on Acoustic Emission Characteristics and Damage Mechanisms of Balsa Wood Core Composite Sandwich under 4-Point Bending
Materials, MDPI, 17(5), p.1044
| [HAL] / [BIB] / [DOI] |
2024 |
Enrico Stragiotti, Francois Xavier Irisarri, Cédric Julien, Joseph Morlier. Efficient 3D truss topology optimization for aeronautical structures
Structural and Multidisciplinary Optimization, Springer Verlag (Germany), 67(42)
| [HAL] / [BIB] / [DOI] |
2024 |
Damien Texier, Julien Milanese, Malo Jullien, Julien Genee, Jean-Charles Passieux, Didier Bardel, Eric Andrieu, Marc Legros, Jean-Charles Stinville. Strain localization in the Alloy 718 Ni-based superalloy: From room temperature to 650 °C
Acta Materialia, Elsevier, 268, p.119759
| [HAL] / [BIB] / [DOI] |
2024 |
Fériel Drouiche, Hamdi Laouici, Mohammed Cheikh. Morphological, chemical, thermal and mechanical analysis of doum fibers as potential reinforcement of polymer composites
Journal of Composite Materials, SAGE Publications, 58(1), p.37-54
| [HAL] / [BIB] / [DOI] |
2024 |
Guillaume Cadet, Manuel Paredes. A new exhaustive semi-analytical method to calculate stress distribution on the surface of a curved beam with circular cross section, with an application to helical compression springs. Une nouvelle méthode exhaustive semi-analytique pour calculer la distribution des contraintes en surface d'une poutre courbe avec section circulaire, avec une application aux ressorts hélicoïdaux de compression
European Journal of Mechanics - A/Solids, Elsevier, 103, p.105191
| [HAL] / [BIB] / [DOI] |
2024 |
Thibault Marsan, Yann Landon, Pablo Navarro, Bruno Watier. Performance criteria for para-athletes in fencing
Sports Biomechanics, Taylor & Francis (Routledge): SSH Titles, p.1-10
| [HAL] / [BIB] / [DOI] |
2024 |
Pramudita Satria Palar, Yohanes Bimo Dwianto, Lavi Rizki Zuhal, Joseph Morlier, Koji Shimoyama, Shigeru Obayashi. Multi-objective design space exploration using explainable surrogate models
Structural and Multidisciplinary Optimization, Springer Verlag (Germany), 67(38)
| [HAL] / [BIB] / [DOI] |
2023 |
Claudia Fernandez-Escudero, Sebastien Prothin, Eric Laurendeau, Annie Ross, Guilhem Michon. Nonlinear flap for passive flutter control of bidimensional wing
Journal of Vibration and Control, SAGE Publications
| [HAL] / [BIB] / [DOI] |
2023 |
Gabriele Capasso, Christian Gogu, Christian Bes, Jean-Philippe Navarro, Martin Kempeneers. Combined Importance Sampling and Separable Monte Carlo: Analytical Variance Estimator and applications to Structural Reliability
International Journal of Reliability and Safety, Inderscience, 17(3-4)
| [HAL] / [BIB] / [DOI] |
2023 |
José Augusto I. da Silva, Leonardo Sanches, Guilhem Michon, Flávio Marques. An enhanced electromagnetic-based nonlinear energy sink for hybrid passive control and energy harvesting from resonant vibrations
Acta Mechanica, Springer Verlag
| [HAL] / [BIB] / [DOI] |
2023 |
Abdelhadi Hadj-Djilani, Lotfi Toubal, Habiba Bouguerara, Redouane Zitoune. Investigating the Influence of High-Void Content on the Impact and Post-Impact Properties of Flax/Epoxy Composite Laminates with Different Stacking Configurations
Composite Structures, Elsevier, p.117832
| [HAL] / [BIB] / [DOI] |
2023 |
Luca Stendardo, Giulia Gastaldo, Marc Budinger, Valérie Pommier-Budinger, Irene Tagliaro, Pablo Ibáñez-Ibáñez, Carlo Antonini. Reframing ice adhesion mechanisms on a solid surface
Applied Surface Science, Elsevier, 641, p.158462
| [HAL] / [BIB] / [DOI] |
2023 |
Edouard Duriez, Víctor Manuel Guadaño Martín, Joseph Morlier. $$CO_2$$ footprint minimization of solar-powered HALE using MDO and eco-material selection
Scientific Reports, Nature Publishing Group, 13(1), p.11994
| [HAL] / [BIB] / [DOI] |
2023 |
Weikun Deng, Khanh T.P. Nguyen, Kamal Medjaher, Christian Gogu, Jérôme Morio. Physics-informed machine learning in prognostics and health management: State of the art and challenges
Applied Mathematical Modelling, Elsevier, 124, p.325-352
| [HAL] / [BIB] / [DOI] |
2023 |
Hassan Obeid, Steven Marguet, Bouchra Hassoune-Rhabbour, Tiphaine Mérian, Aurélie Léonardi, Jean-François Ferrero, Héléne Welemane. Evolution of physico-chemical and mechanical properties of bonded epoxy assemblies during hygrothermal cyclic aging. Évolution des propriétés physico-chimiques et mécaniques d'assemblages collés à l'époxy durant un vieillissement hygrothermique
Mechanics & Industry, EDP Sciences, 24, p.40
| [HAL] / [BIB] / [DOI] |
2023 |
Sabrina Otmani, Guilhem Michon, Bruno Watier. Use of adult anthropometric tables to estimate children body segment inertial parameters
International Biomechanics, Taylor & Francis, 10(1), p.18-28
| [HAL] / [BIB] / [DOI] |
2023 |
Laurent Mezeix, Ainhoa Soldevila Rivas, Antonin Relandeau, Christophe Bouvet. A New Method to Predict Damage to Composite Structures Using Convolutional Neural Networks
Materials, MDPI, 16(22), p.7213
| [HAL] / [BIB] / [DOI] |
2023 |
Khaled Hallak, Fulbert Baudoin, Virginie Griseri, Florian Bugarin, Stephane Segonds, Severine Le Roy, Gilbert Teyssedre. Refining the physical description of charge trapping and detrapping in a transport model for dielectrics using an optimization algorithm
COMPEL: The International Journal for Computation and Mathematics in Electrical and Electronic Engineering, Emerald
| [HAL] / [BIB] / [DOI] |
2023 |
Pierre-André Rey, Johanna Senatore, Yann Landon. Effect of cutting tool geometry on hole quality in orbital drilling
International Journal of Advanced Manufacturing Technology, Springer Verlag
| [HAL] / [BIB] / [DOI] |
2023 |
Wensen Zhang, Jian Fu, Jean-Charles Maré, Haolin Ma, Tianxiang Xia, Yongling Fu, Jiangao Zhao. Investigations on MBSE modelling and dynamic performance assessment of an electrical trimmable horizontal stabilizer actuator
Chinese Journal of Aeronautics, Elsevier, 36(11), p.417-433
| [HAL] / [BIB] / [DOI] |
2023 |
Roberto Alcorta, Benjamin Chouvion, Guilhem Michon, Olivier Montagnier. On the use of frictional dampers for flutter mitigation of a highly flexible wing
International Journal of Non-Linear Mechanics, Elsevier, 156, p.104515
| [HAL] / [BIB] / [DOI] |
2023 |
Romain Guélou, Florent Eyma, Arthur Cantarel, Samuel Rivallant, Bruno Castanié. Static and dynamic crushing of sandwich tubes with composite skins and three plywood cores (poplar, birch, and oak)
International Journal of Crashworthiness, Taylor & Francis, p.1-22
| [HAL] / [BIB] / [DOI] |
2023 |
Rémy Charayron, Thierry Lefebvre, Nathalie Bartoli, Joseph Morlier. Towards a multi-fidelity & multi-objective Bayesian optimization efficient algorithm
Aerospace Science and Technology, Elsevier, 142(Part B)
| [HAL] / [BIB] / [DOI] |
2023 |
Zijiao Jia, Christian Garnier, Marie-Laetitia Pastor, Jérôme Rousseau, Xiaojing Gong. Experimental investigation of impacted multidirectional laminates under compressive static and cyclic loading
Composite Structures, Elsevier, 322, p.117335
| [HAL] / [BIB] / [DOI] |
2023 |
Zijiao Jia, Marie-Laetitia Pastor, Christian Garnier, Xiaojing Gong. Fatigue life determination based on infrared thermographic data for MultiDirectional (MD) CFRP composite laminates
Composite Structures, Elsevier, 319, p.117202
| [HAL] / [BIB] / [DOI] |
2023 |
Faten Chaouch, Ated Ben Khalifa, Redouane Zitoune, Mondher Zidi. Modeling and multi-objective optimization of abrasive water jet machining process of composite laminates using a hybrid approach based on neural networks and metaheuristic algorithm
Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture, SAGE Publications
| [HAL] / [BIB] / [DOI] |
2023 |
Marcos Vicente Moreira, Yann Landon, Anna-Carla Araujo. A Timed Automaton Model with Timing Intervals and Outputs for Fault Diagnosis of the Drilling Process on a CNC Machine
Journal of Control, Automation and Electrical Systems, Springer
| [HAL] / [BIB] / [DOI] |
2023 |
Charly Foissac, Alain Daidié, Stéphane Segonds, Clément Chirol. Towards smart tightening in aeronautical assemblies
Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science, SAGE Publications, 238(6), p.2362-2375
| [HAL] / [BIB] / [DOI] |
2023 |
Weikun Deng, Khanh T.P. Nguyen, Kamal Medjaher, Christian Gogu, Jérôme Morio. Rotor dynamics informed deep learning for detection, identification, and localization of shaft crack and unbalance defects
Advanced Engineering Informatics, Elsevier, 58, p.102128
| [HAL] / [BIB] / [DOI] |
2023 |
V. Palanque, E. Villeneuve, M. Budinger, V. Pommier-Budinger, G. Momen. Experimental measurement and expression of atmospheric ice Young's modulus according to its density
Cold Regions Science and Technology, Elsevier, 212, p.103890
| [HAL] / [BIB] / [DOI] |
2023 |
Özgür Yalc, Georges Saliba, Xavier Gloerfelt, Ahmad Batikh, Lucien Baldas. Numerical Investigation of a Pulsed Jet Actuator Having Non-Negligible Switching Time
AIAA Journal, American Institute of Aeronautics and Astronautics, 61(10)
| [HAL] / [BIB] / [DOI] |
2023 |
Patrice Longère. Thermodynamically consistent strain hardening variable/driving force, inelastic stored energy and self-heating in dynamic plasticity
Mechanics of Materials, Elsevier, p.104728
| [HAL] / [BIB] / [DOI] |
2023 |
T. Sentagne, M. Zerbola, M. Garcia, C. Kumsap, V. Mungkung, L. Mezeix. Method to map human and infrastructure vulnerability using CNN land cover: Case study of floating tank explosion at petrochemical plants of LaemChabang, Thailand
Journal of Loss Prevention in the Process Industries, Elsevier, 83, p.105057
| [HAL] / [BIB] / [DOI] |
2023 |
Yuan Wu, Marie-Laetitia Pastor, Marianne Perrin, Pascal Casari, Xiaojing Gong. Characterisation of damage mechanisms of GFRP-balsa sandwich under 4-point bending based on two-step clustering process in acoustic emission analysis
Composites Part B: Engineering, Elsevier, 260, p.110774
| [HAL] / [BIB] / [DOI] |
2023 |
Georges Saliba, Ahmad Batikh, Stéphane Colin, Lucien Baldas. Pulsed impinging jets for heat transfer: a short review
ASME Journal of Heat and Mass Transfer, 145(11), 110801 (32 pages)
| [HAL] / [BIB] / [DOI] |
2023 |
Quy Tung Linh Vu, Guillaume Seon, Sarvenaz Ghaffari, Andrew Makeev, Frédéric Lachaud, Miguel Charlotte, Yves Gourinat. Evaluating Residual Stress in Carbon Fiber-Reinforced Polymer (CFRP) at Microscale Using Fiber Push-Out Experiment and Finite Element Modeling
Polymers, MDPI, 15(12), p.2596
| [HAL] / [BIB] / [DOI] |
2023 |
Matthieu Labat, Ion Hazyuk. Numerical comparison of an office cooled with and without a ventilated slab using a model predictive controller
Applied Thermal Engineering, Elsevier, 228, p.120500
| [HAL] / [BIB] / [DOI] |
2023 |
Edouard Duriez, Catherine Azzaro-Pantel, Joseph Morlier, Miguel Charlotte. A fast method of material, design and process eco-selection via topology optimization, for additive manufactured structures
Cleaner Environmental Systems, Elsevier, 9, p.100114
| [HAL] / [BIB] / [DOI] |
2023 |
Braedon Hoekstra, Kamal Kolasangiani, Atefeh Shekarian, Donatus Cd Oguamanam, Redouane Zitoune, Habiba Bougherara. Influence of abrasive water jet and conventional drilling on the fatigue performance of hybrid carbon/flax laminates
Proceedings of the Institution of Mechanical Engineers, Part L: Journal of Materials: Design and Applications, SAGE Publications, 237(6), p.1363-1378
| [HAL] / [BIB] / [DOI] |
2023 |
Abdelhadi Hadj-Djilani, Abderraouf Kioua, Redouane Zitoune, Lotfi Toubal, Habiba Bougherara. Exploring the flexural and impact properties of pure flax/epoxy and Kevlar/flax/epoxy composites through experimental and numerical analysis
Proceedings of the Institution of Mechanical Engineers, Part L: Journal of Materials: Design and Applications, SAGE Publications, p.2761-2778
| [HAL] / [BIB] / [DOI] |
2023 |
Michel Salaün, Eric Paroissien, Sébastien Schwartz, Tuan-Long Vu, Valeria de Angelis, Maxime Luyat, Benjamin Ordonneau. Formulation methodologies based on Taylor expansion power and Fourier expansion series for the macro-element resolution scheme of enriched models for the stress analysis of adhesively bonded joints
International Journal for Numerical Methods in Engineering, Wiley
| [HAL] / [BIB] / [DOI] |
2023 |
Jesús García Pérez, Leonardo Sanches, Amin Ghadami, Guilhem Michon, Bogdan Epureanu. A physics-informed data-driven approach for forecasting bifurcations in dynamical systems
Nonlinear Dynamics, Springer Verlag, 111(13), p.11773-11789
| [HAL] / [BIB] / [DOI] |
2023 |
Georges Saliba, Vincent Raimbault, Ahmad Batikh, Stéphane Colin, Lucien Baldas. Relaxation fluidic oscillators: design parameters, new operating modes and characteristics of their internal and external flows
Journal of Fluids Engineering, American Society of Mechanical Engineers, 145(10), 101202 (16 pages)
| [HAL] / [BIB] / [DOI] |
2023 |
Xiaoyu Liang, Anis Hor, Camille Robert, Feng Lin, Franck Morel. Effects of building direction and loading mode on the high cycle fatigue strength of the laser powder bed fusion 316L
International Journal of Fatigue, Elsevier, 170, p.107506
| [HAL] / [BIB] / [DOI] |
2023 |
Thomas Roncen, Guilhem Michon, Vincent Manet. Design and experimental analysis of a pneumatic Nonlinear Energy Sink
Mechanical Systems and Signal Processing, Elsevier, 190, p.110088
| [HAL] / [BIB] / [DOI] |
2023 |
Guillaume Cadet, Manuel Paredes, Herve Orciere. IMPROVED DESIGN OF SINGLE-LAYERED WIRE STRAND FOR COMBINED TENSILE AND CRIMPING TESTING WITH MESH ELEMENT OPTIMIZATION
DYNA : Ingenieria e Industria, Federación de Asociaciones de Ingenieros Industriales, 98(1), p.274-281
| [HAL] / [BIB] / [DOI] |
2023 |
F. Pollet, M. Budinger, S. Delbecq, J.-M. Moschetta, J. Liscouët. Quantifying and mitigating uncertainties in design optimization including off-the-shelf components: Application to an electric multirotor UAV
Aerospace Science and Technology, Elsevier, 136, p.108179
| [HAL] / [BIB] / [DOI] |
2023 |
B. Vieille, J.‐d. Pujols-Gonzalez, Christophe Bouvet, T. Breteau, C. Gautrelet. High temperature in situ impact testing of hybrid thermoplastic polyether ether ketone laminates
Polymer Composites, Wiley, 44(7), p.4027-4037
| [HAL] / [BIB] / [DOI] |
2023 |
Juan Daniel Pujols Gonzalez, Christophe Bouvet, Benoit Vieille. Translaminar Cracking Modeling in Woven-ply Thermoplastic Laminates in Tension and in Compression
Applied Composite Materials, Springer Verlag (Germany), 30(3), p.913-935
| [HAL] / [BIB] / [DOI] |
2023 |
Mohamed Amin Ben Lassoued, Annie Ross, Guilhem Michon. Vibration confinement and localization patterns in weakly coupled oscillators with parameter gradients
Journal of Sound and Vibration, Elsevier, 549, p.117590
| [HAL] / [BIB] / [DOI] |
2023 |
Florent Grotto, Christophe Bouvet, Bruno Castanié, Joël Serra. Experimental behaviour of aeronautical notched carbon fibre reinforced thermoplastic panels under combined tension-shear-pressure loadings
Engineering Failure Analysis, Elsevier, 146, p.107075
| [HAL] / [BIB] / [DOI] |
2023 |
M. Ginot, C. Bouvet, B. Castanié, M. d'Ottavio, Joël Serra, N. Mahuet. Local buckling on large sandwich panels applied to light aviation: Experimental and computation dialogue
International Journal of Solids and Structures, Elsevier, 268, p.112170
| [HAL] / [BIB] / [DOI] |
2023 |
Anass Akrim, Christian Gogu, Rob A. Vingerhoeds, Michel Salaün. Self-Supervised Learning for Data Scarcity in a Fatigue Damage Prognostic Problem
Engineering Applications of Artificial Intelligence, Elsevier, 120, p.105837
| [HAL] / [BIB] / [DOI] |
2023 |
Florent Grotto, Christophe Bouvet, Bruno Castanié, Joël Serra. Design and Testing of Impacted Stiffened CFRP Panels under Compression with the VERTEX Test Rig
Aerospace, MDPI, 10(4), p.327
| [HAL] / [BIB] / [DOI] |
2023 |
Julien Berthe, Salim Chaibi, Gérald Portemont, Pascal Paulmier, Frédéric Laurin, Christophe Bouvet. High-speed infrared thermography for in-situ damage monitoring during impact test. Thermographie infrarouge à haute vitesse pour le suivi de l'endommagement in situ pendant un essai d'impact
Composite Structures, Elsevier, 314, p.116934
| [HAL] / [BIB] / [DOI] |
2023 |
Shahriar Bakrani Balani, Hossein Mokhtarian, Eric Coatanéa, France Chabert, Valérie Nassiet, Arthur Cantarel. Integrated modeling of heat transfer, shear rate, and viscosity for simulation-based characterization of polymer coalescence during material extrusion
Journal of Manufacturing Processes, Society of Manufacturing Engineers, 90, p.443-459
| [HAL] / [BIB] / [DOI] |
2023 |
Sonia Braiek, Redouane Zitoune, Vijayan Krishnaraj, Ated Benkhalifa, Mohamed Faycal Ameur, Usama Khashaba, Mondher Zidi. Drilling of filament wound hybrid composite tubes: An experimental study
Composite Structures, Elsevier, 308, p.116686
| [HAL] / [BIB] / [DOI] |
2023 |
Mahfoud Herraz, Jean-Max Redonnet, Mohammed Sbihi, Marcel Mongeau. Blackbox optimization and surrogate models for machining free-form surfaces
Computers & Industrial Engineering, Elsevier, 177, p.109029
| [HAL] / [BIB] / [DOI] |
2023 |
Zijiao Jia, Marie-Laetitia Pastor, Christian Garnier, Xiaojing Gong. A new method for determination of fatigue limit of composite laminates based on thermographic data
International Journal of Fatigue, Elsevier, 168, p.107445
| [HAL] / [BIB] / [DOI] |
2023 |
Dingdong Zhang, Guillermo López-Quesada, Samuel Bergdolt, Stefan Hengsbach, Klaus Bade, Stéphane Colin, Marcos Rojas-Cárdenas. 3D micro-structures for rarefied gas flow applications manufactured via two-photon-polymerization
Vacuum, Elsevier, 211, 111915 (10 pages)
| [HAL] / [BIB] / [DOI] |
2023 |
Zhenhang Wu, Manuel Paredes, Sébastien Seguy. Targeted energy transfer in a vibro-impact cubic NES: description of regimes and optimal design
Journal of Sound and Vibration, Elsevier, 545, p.117425
| [HAL] / [BIB] / [DOI] |
2023 |
Miguel Charlotte, Ignacio Fernandez Núnez, Yves Gourinat, Denis Matignon. Port-Hamiltonian Formulations of Some Elastodynamics Theories of Isotropic and Linearly Elastic Shells: Naghdi–Reissner’s Moderately Thick Shells
Applied Sciences, Multidisciplinary digital publishing institute (MDPI), 13(4), p.2608
| [HAL] / [BIB] / [DOI] |
2023 |
M. Ginot, C. Bouvet, Bruno Castanié, Joël Serra, N. Mahuet. Local buckling on large sandwich panels used in light aviation
Composite Structures, Elsevier, 304(Part 1), p.116439
| [HAL] / [BIB] / [DOI] |
2023 |
R Rutar, J Serra, Q Bausiere, C Bouvet. Experimental characterization of tensile and compressive translaminar fracture toughness coupling multi-physics measurements
Engineering Fracture Mechanics, Elsevier
| [HAL] / [BIB] / [DOI] |
2023 |
Thiago Vasconcellos Birro, Eric Paroissien, Frederic Lachaud, Maëlenn Aufray. On the effect of roughness parameters on adherence using the three-point bending test (ISO 14679:1997)
Journal of Adhesion, Taylor & Francis, 99(3), p.492-517
| [HAL] / [BIB] / [DOI] |
2023 |
Christine Boher, Tarek Younsi, Adriana Soveja, Michel Chaussumier. Influence of iron dilution on plastic deformation mechanisms in cobalt-based alloys: Consequence of phase transformations on tribological behavior
Wear, Elsevier, 524-525, p.204845
| [HAL] / [BIB] / [DOI] |
2023 |
Olivier Dorival, Pablo Navarro, Steven Marguet, Jean-François Ferrero. 3D digital image correlation analysis of medium velocity soft impacts on laminated composite
Forces in Mechanics, p.100245
| [HAL] / [BIB] / [DOI] |
2023 |
Manon Waeytens, Adnan. Syed, Tracey Roberts, Fabian Duarte Martinez, Simon Gray, John.R. Nicholls. A microscopy study of nickel-based superalloys performance in type I hot corrosion conditions
Materials at High Temperatures, Taylor and Francis, 40(4), p.272-282
| [HAL] / [BIB] / [DOI] |
2023 |
Céline Goni-Lizoain, Rébecca Bonnaire, Jean-Charles Fontanier, Etienne Copin, Rémi Gilblas, Carole Aubry-Meneveau, Pascal Rumeau, Yannick Le Maoult. Polypropylene/bis(benzoxazolyl)stilbene mechanochromic blends, an attractive feature for colorimetric strain detection
Sensors and Actuators A: Physical, Elsevier, 355, p.114310
| [HAL] / [BIB] / [DOI] |
2023 |
Anh Tuan Le, Quentin Govignon, Samuel Rivallant, Thierry Cutard. Mode I and mode II fracture behavior in nano‐engineered long fiber reinforced composites
Polymer Composites, Wiley, 44(7), p.4016-4026
| [HAL] / [BIB] / [DOI] |
2023 |
Aissatou Ndong, Thierry Cutard, Ange Nzihou, Martin Piotte, Jean-Christophe Cadot, Doan Pham Minh. Dynamic characterization approach for the investigation of microstructural changes in clay-based materials during firing
Open Ceramics, Elsevier, 13, p.100326
| [HAL] / [BIB] / [DOI] |
2023 |
Kevin Cavé, Damien Texier, E. Fessler, D. Monceau, Dominique Poquillon. Size Effect on the Tensile Mechanical Behavior of Thin Ti6242S Specimens at 723 K and 823 K
Metallurgical and Materials Transactions A, Springer Verlag/ASM International, 54
| [HAL] / [BIB] / [DOI] |
2023 |
Oriol Chandre-Vila, Jean-Philippe Boin, Bernard Barriety, Yann Nivet, Joseph Morlier, Nicolas Gourdain. Fast Nonlinear Method for Static Aeroelasticity Applied to High Aspect Ratio Wings
Journal of Aircraft, American Institute of Aeronautics and Astronautics, p.1-21
| [HAL] / [BIB] / [DOI] |
2023 |
Ricardo Santamaria, Ke Wang, Mobin Salasi, Mehdi Salem, Philippe Lours, Mariano Iannuzzi, Zakaria Quadir. Stress corrosion cracking behavior of austenitic stainless steel 316L produced using laser-based powder bed fusion
Corrosion, National Association of Corrosion Engineers, 4311
| [HAL] / [BIB] / [DOI] |
2023 |
Ali Rouwane, Pascal Doumalin, Robin Bouclier, Jean-Charles Passieux, Jean-Noël Périé. Architecture-Driven Digital Volume Correlation: application to the analysis of in-situ crushing of a polyurethane foam
Experimental Mechanics, Society for Experimental Mechanics, 63(5), p.897-913
| [HAL] / [BIB] / [DOI] |
2023 |
Irvin Séchepée, Paul Paulain, Yuka Nagasaki, Riku Tanaka, Hiroaki Matsumoto, Vincent Velay. Excellent Balance of Ultimate Tensile Strength and Ductility in a Ti–6Al–2Sn–4Zr–2Mo–Si Alloy Having Duplex α + α′ Microstructure: Effect of Microstructural Factors from Experimental Study and Machine Learning
Materials Transactions, Nihon Kinzoku Gakkai, 64(1), p.111-120
| [HAL] / [BIB] / [DOI] |
2023 |
Axel Peignon, Joël Serra, L. Gélard, Arthur Cantarel, Florent Eyma, B. Castanié. Mode I delamination R-Curve in poplar laminated veneer lumber
Theoretical and Applied Fracture Mechanics, Elsevier
| [HAL] / [BIB] / [DOI] |
2023 |
Clément Rongier, Rémi Gilblas, N. Rasoldier, Fabrice Schmidt, Yannick Le Maoult. Thermo-optical coupling applied to high luminance LED used in automotive front lighting
International Journal of Thermal Sciences, Elsevier, 191, p.108337
| [HAL] / [BIB] / [DOI] |
2023 |
Sandrine Duluard, Etienne Copin, Florence Ansart, Yannick Le Maoult, Thierry Sentenac, Philippe Brevet, Nicolas Alonso. Luminescence and structural properties of europium doped titania in the 600–750 °C range
Open Ceramics, Elsevier, 14, p.100362
| [HAL] / [BIB] / [DOI] |
2023 |
John-Eric Dufour, Guillaume Colantonio, Christophe Bouvet, Jean-Noël Périé, Jean-Charles Passieux, Joël Serra. Monitoring structural scale composite specimens in a post‐buckling regime: The integrated finite element stereo digital image correlation approach with geometrically non‐linear regularization
Strain, Wiley-Blackwell
| [HAL] / [BIB] / [DOI] |
2023 |
Vincent Schenk, Raffaele D’elia, Philippe Olivier, Karine Labastie, Mathias Destarac, Marc Guerre. Exploring the Limits of High- T g Epoxy Vitrimers Produced through Resin-Transfer Molding
ACS Applied Materials & Interfaces, Washington, D.C. : American Chemical Society, 15(39), p.46357-46367
| [HAL] / [BIB] / [DOI] |
2023 |
Francisco Cavas Martinez, Manuel Paredes, Francesco Gherardini, Carmelo Gomez Garcia. Additive manufacturing technologies for sustainable-intelligent structures: a new concept of multidimensional printing
DYNA : Ingenieria e Industria, Federación de Asociaciones de Ingenieros Industriales, 98(1), p.10-11
| [HAL] / [BIB] / [DOI] |
2023 |
Seif Eddine Fenni, Alejandro Müller, Dario Cavallo. Understanding polymer nucleation by studying droplets crystallization in immiscible polymer blends
Polymer, Elsevier, p.125514
| [HAL] / [BIB] / [DOI] |
2023 |
Aicha Errabity, Paul Calmels, Woo Suck Han, Rébecca Bonnaire, Romain Pannetier, Reynald Convert, Jérôme Molimard. The effect of low back pain on spine kinematics: A systematic review and meta-analysis
Review
Clinical Biomechanics, Elsevier, 108, p.106070
| [HAL] / [BIB] / [DOI] |
2023 |
Achraf Belkhiri, Nick Virgilio, Enric Santanach-Carreras, Jérôme Esvan, Valérie Nassiet, Hélène Welemane, Olivier de Almeida, France Chabert. Influence of silane interfacial chemistry on the curing process of anionic Polyamide 6 in glass reinforced composites
Colloids and Surfaces A: Physicochemical and Engineering Aspects, Elsevier, 676(Part B), p.132183
| [HAL] / [BIB] / [DOI] |
2023 |
Ahmed Elmasry, Wiyao Azoti, Ahmed Elmarakbi. Modelling and design of hierarchical fibre-graphene nanoplatelets reinforced elasto-viscoplastic polymer matrix composites to improve crashworthiness and energy absorption
Composite Structures, Elsevier, p.116705
| [HAL] / [BIB] / [DOI] |
2023 |
Adrien Dangremont Di Crescenzo, Michel Mousseigne, Walter Rubio. Influence of wiper edge on surface integrity for end-milling of Ti-6Al-4V
International Journal of Machining and Machinability of Materials, Inderscience, 1(1), p.1
| [HAL] / [BIB] / [DOI] |
2023 |
Imed Boughdiri, Tarek Mabrouki, Redouane Zitoune, Khaled Giasin, Mohamed Faycal Ameur. 3D macro-mechanical FE simulation for GLARE® drilling with experimental validation
Composite Structures, Elsevier, 304, p.116458
| [HAL] / [BIB] / [DOI] |
2023 |
Jean-Charles Passieux, Robin Bouclier, Oliver Weeger. Image‐based isogeometric twins of lattices with virtual image correlation for varying cross‐section beams
International Journal for Numerical Methods in Engineering, Wiley, 24 p.
| [HAL] / [BIB] / [DOI] |
2023 |
Jean-Baptiste Orsatelli, Eric Paroissien, Frederic Lachaud, Sébastien Schwartz. Bonded flush repairs for aerospace composite structures
A review on modelling strategies and application to repairs optimization, reliability and durability
Composite Structures, Elsevier, 304, p.116338
| [HAL] / [BIB] / [DOI] |
2023 |
Antoine Le Duigou, Monia Grabow, M. Castro, R. Toumi, M. Ueda, R. Matsuzaki, Y. Hirano, Justin Dirrenberger, F. Scarpa, Raffaele D’elia, K. Labstie, U. Lafont. Thermomechanical performance of continuous carbon fibre composite materials produced by a modified 3D printer
Heliyon, Elsevier, 9(3), p.e13581
| [HAL] / [BIB] / [DOI] |
2023 |
Raffaele D'Elia, Leonardo Sanches, Jean Marie Des, Guilhem Michon. Experimental characterization and numerical modeling of a viscoelastic expandable epoxy foam: Time–temperature transformation and time–temperature equivalence diagrams
Journal of Applied Polymer Science, Wiley, 140(23)
| [HAL] / [BIB] / [DOI] |
2023 |
Seif Eddine Fenni, Mariangela Spigno, Wei Wang, Andrea Costanzo, Alejandro Müller, Dario Cavallo. How nucleating particles migration affects the fractionated crystallization of isotactic polypropylene/polystyrene immiscible blends
Thermochimica Acta, Elsevier, 719, p.179407
| [HAL] / [BIB] / [DOI] |
2023 |
Paul Saves, Y. Diouane, N. Bartoli, T. Lefebvre, J. Morlier. A mixed-categorical correlation kernel for Gaussian process
Neurocomputing, Elsevier
| [HAL] / [BIB] / [DOI] |
2023 |
Anh Tuan Le, Quentin Govignon, Samuel Rivallant, Thierry Cutard. Nano-engineered prepreg manufacturing: control of capillary rise of resin into VACNTs’ forests
Carbon Letters, Springer, 33, p.1019-1025
| [HAL] / [BIB] / [DOI] |
2023 |
Yohan Cosquer, Patrice Longère, Olivier Pantalé, Claude Gailhac. Experiment/simulation correlation-based methodology for metallic ballistic protection solutions
Defence Technology
| [HAL] / [BIB] / [DOI] |
2023 |
R. Black, T. Garbowski, C. Bean, A. Eberle, S. Nickell, Damien Texier, Valery Valle, J. Stinville. High-Throughput High-Resolution Digital Image Correlation Measurements by Multi-Beam SEM Imaging
Experimental Mechanics, Society for Experimental Mechanics, 63, p.939–953
| [HAL] / [BIB] / [DOI] |
2023 |
Placide Uwizeyimana, Marianne Perrin, Emmanuel Laügt, Pierre Larricq, Florent Eyma. Strain measurement in glulam timber for bridges with embedded strain gauges and detection of moisture-variation effects
Wood Material Science and Engineering, Taylor & Francis, 18(5), p.1597-1607
| [HAL] / [BIB] / [DOI] |
2023 |
Anh Tuan Le, Quentin Govignon, Samuel Rivallant, Thierry Cutard. Composite laminates reinforced by vertically aligned carbon nanotubes: Detailed manufacturing process, from nanotubes transfer to composite consolidation
Journal of Composite Materials, SAGE Publications, 57, p.4239–4253
| [HAL] / [BIB] / [DOI] |
2023 |
Lara Boutros, Pablo Navarro, Steven Marguet, Issam Tawk, Jean-François Ferrero. Dynamic response of epoxy foam structures reinforced with aramid layers subjected to low-velocity impact
Proceedings of the Institution of Mechanical Engineers, Part L: Journal of Materials: Design and Applications, SAGE Publications
| [HAL] / [BIB] / [DOI] |
2023 |
Matteo Bochet, Sofia Bergman, Mika Holmberg, Philipp Wittmann, Martin Wieser, Gabriella Stenberg Wieser, Yves Gourinat, Christian Imhof, Stas Barabash. Perturbations of JUICE/JDC ion measurements caused by spacecraft charging in the Jovian magnetosphere and the ionosphere of Ganymede
Journal of Geophysical Research Space Physics, American Geophysical Union/Wiley
| [HAL] / [BIB] / [DOI] |
2023 |
Claire Morel, E. Baranger, J. Lamon, C. Marques, S. Le Bras, J. Braun, C. Lorrette. The influence of grinding process on the mechanical behavior of SiC/SiC composite tubes under uniaxial tension
Journal of the European Ceramic Society, Elsevier, 44(1), p.91-106
| [HAL] / [BIB] / [DOI] |
2023 |
Noémie Martin, Anis Hor, Etienne Copin, Philippe Lours, Léon Ratsifandrihana. Fatigue properties of as-built and heat-treated Inconel 625 obtained by the hybridization of two laser-powder based additive processes
International Journal of Fatigue, Elsevier, 172, p.107650
| [HAL] / [BIB] / [DOI] |
2023 |
Manuelle Romero, Valdicleide Mello, Christine Boher, André Tschiptschin, Cherlio Scandian. On the tribological behavior of cobalt-based nanocomposite coatings containing ZnO@Graphene oxide core-shell nanoparticles
Wear, Elsevier, 522, p.204835
| [HAL] / [BIB] / [DOI] |
2023 |
Evgeniia Lapina, Paul Oumaziz, Robin Bouclier, Jean-Charles Passieux. A fully non-invasive hybrid IGA/FEM scheme for the analysis of localized non-linear phenomena
Computational Mechanics, Springer Verlag, 71, p.213–235
| [HAL] / [BIB] / [DOI] |
2023 |
Gilles Dusserre, Thomas Pottier, Thierry Cutard. Contribution of high-temperature 3D-Digital Image Correlation to investigate the creep behaviour of refractory materials
Open Ceramics, Elsevier, 15, p.100425
| [HAL] / [BIB] / [DOI] |
2023 |
P. Journoud, C. Bouvet, B. Castanié, L. Ratsifandrihana. Effect of defects combined with impact damage on compressive residual strength in curved CFRP specimen
Thin-Walled Structures, Elsevier, 184, p.110484
| [HAL] / [BIB] / [DOI] |
2023 |
Yanfeng Gao, Yanping Wang, Yuzhen Wang, Pascale Magaud, Yuta Liu, Fei Zeng, Jingjing Yang, Lucien Baldas, Yujun Song. Nanocatalysis meets microfluidics: A powerful platform for sensitive bioanalysis
Trends in Analytical Chemistry, Elsevier, 158, p.116887
| [HAL] / [BIB] / [DOI] |
2023 |
Lorena Cano Salinas, Xavier Sourd, Kamel Moussaoui, Sabine Le Roux, Mehdi Salem, Anis Hor, Redouane Zitoune. Effect of process parameters of Plain Water Jet on the cleaning quality, surface and material integrity of Inconel 718 milled by Abrasive Water Jet
Tribology International, Elsevier, 178(Part B), p.108094
| [HAL] / [BIB] / [DOI] |
2022 |
Christophe Bouvet, Benoît Vieille, Juan Daniel Pujols Gonzalez. Experimental characterization and numerical modelling of the translaminar fracture of woven-ply hybrid fibers reinforced thermoplastic laminates
Engineering Fracture Mechanics, Elsevier, 276, p.108867
| [HAL] / [BIB] / [DOI] |
2022 |
Thibaut Paty, Nicolas Binaud, Stéphane Segonds, Hong Wang. Sensitivity Analysis of a Suspended Cable-Driven Parallel Robot to Design Parameters
Journal of Mechanisms and Robotics, American Society of Mechanical Engineers, p.1-16
| [HAL] / [BIB] / [DOI] |
2022 |
M. Mentet, N. Hongkarnjanakul, C. Schwob, L. Mezeix. Method to apply and visualize physical models associated to a land cover performed by CNN: A case study of vegetation and water cooling effect in Bangkok Thailand
Remote Sensing Applications: Society and Environment, Elsevier, 28, p.100856
| [HAL] / [BIB] / [DOI] |
2022 |
P. Journoud, Christophe Bouvet, Bruno Castanié, L. Ratsifandrihana. Numerical analysis of the effects of wrinkles in the radius of curvature of L-shaped CFRP specimens on unfolding failure
Composite Structures, Elsevier, 299, p.116107
| [HAL] / [BIB] / [DOI] |
2022 |
Philippe Blais, Lotfi Toubal, Redouane Zitoune, Zouhair Chaib. Static and fatigue testing of open-hole and assembled composites based on long carbon fiber and a nylon matrix developed using fused deposition modelling: Multiscale characterization of printed holes and machined holes
Composites Part A: Applied Science and Manufacturing, Elsevier, 162, p.107126
| [HAL] / [BIB] / [DOI] |
2022 |
Xavier Cadiot, Leonardo Sanches, Aurélien Hot, Alexandre Mouysset, Guilhem Michon. Dynamic Base Excitation of a Satellite Cable Harness: Modeling and Experiments
Journal of Spacecraft and Rockets, American Institute of Aeronautics and Astronautics, 59(6), p.2206-2209
| [HAL] / [BIB] / [DOI] |
2022 |
Jesús García Pérez, Amin Ghadami, Leonardo Sanches, Guilhem Michon, Bogdan Epureanu. Data-driven optimization for flutter suppression by using an aeroelastic nonlinear energy sink
Journal of Fluids and Structures, Elsevier, 114, p.103715
| [HAL] / [BIB] / [DOI] |
2022 |
Zhenhang Wu, Sébastien Seguy, Manuel Paredes. Estimation of energy pumping time in bistable NES and experimental validation
Journal of Vibration and Acoustics, American Society of Mechanical Engineers, 144(5), p.051004
| [HAL] / [BIB] / [DOI] |
2022 |
Valérian Palanque, Alexis Marboeuf, Marc Budinger, Valérie Pommier-Budinger, Lokman Bennani. Improving mechanical ice protection systems with substrate shape optimization
Cold Regions Science and Technology, Elsevier, 202, p.103641
| [HAL] / [BIB] / [DOI] |
2022 |
Sébastien Schwartz, Juan José Montero Jiménez, Rob A. Vingerhoeds, Michel Salaün. An unsupervised approach for health index building and for similarity-based remaining useful life estimation
Computers in Industry, Elsevier, 141, p.103716
| [HAL] / [BIB] / [DOI] |
2022 |
A Giordano, A Diourté, C Bordreuil, Florian Bugarin, S Segonds. Thermal Scalar Field for Continuous three-dimensional Toolpath strategy using Wire Arc Additive Manufacturing for free-form thin parts
Computer-Aided Design, Elsevier, 151
| [HAL] / [BIB] / [DOI] |
2022 |
Jeremy Roussel, Marc Budinger, Laurent Ruet. Preliminary Sizing of the Electrical Motor and Housing of Electromechanical Actuators Applied on the Primary Flight Control System of Unmanned Helicopters
Aerospace, MDPI, 9(9), p.473
| [HAL] / [BIB] / [DOI] |
2022 |
S. Anand, J.-E. Chambe, Christophe Bouvet, Samuel Rivallant. Stacking sequence optimization of composite tubes submitted to crushing using the discrete ply model
Mechanics of Advanced Materials and Structures, Taylor & Francis, p.1-21
| [HAL] / [BIB] / [DOI] |
2022 |
Hema Aubeelack, Stéphane Segonds, Christian Bes, Thierry Druot, Joël Brezillon, Adrien Bérard, Marylène Duffau, Guillaume Gallant. Surrogate model development for optimized blended-wing-body aerodynamics
Journal of Aircraft, American Institute of Aeronautics and Astronautics
| [HAL] / [BIB] |
2022 |
Jean Gulla, Arthur Cantarel, Marie-Laetitia Pastor, Xiaojing Gong. Impact Behaviors of Sandwich Composites Produced by Liquid Resin Infusion: Influences of the Process Parameters
Journal of Aerospace Engineering, American Society of Civil Engineers, 35(5)
| [HAL] / [BIB] / [DOI] |
2022 |
Raphaël Fouque, Robin Bouclier, Jean-Charles Passieux, Jean-Noël Périé. Photometric DIC: a unified framework for global Stereo Digital Image Correlation based on the construction of textured digital twins
Journal of Theoretical, Computational and Applied Mechanics, INRIA, Volume 2, p.1-32
| [HAL] / [BIB] / [DOI] |
2022 |
Gaspard Berthelin, Sylvain Dubreuil, Michel Salaün, Nathalie Bartoli, Christian Gogu. Disciplinary proper orthogonal decomposition and interpolation for the resolution of parameterized multidisciplinary analysis
International Journal for Numerical Methods in Engineering, Wiley, 123(15), p.3594-3626
| [HAL] / [BIB] / [DOI] |
2022 |
Benjamin Ordonneau, Eric Paroissien, Michel Salaün, Alejandro Benitez-Martin, Sébastien Schwartz, Julien Malrieu, Alexandre Guigue. A simplified modal analysis of a single lap bonded joint using the macro-element technique
International Journal of Solids and Structures, Elsevier, 249, p.111631
| [HAL] / [BIB] / [DOI] |
2022 |
Pierre-Jean Barjhoux, Youssef Diouane, Stéphane Grihon, Joseph Morlier. An outer approximation bi-level framework for mixed categorical structural optimization problems
Structural and Multidisciplinary Optimization, Springer Verlag (Germany), 65(8)
| [HAL] / [BIB] / [DOI] |
2022 |
Benoît Vieille, Juan Daniel Pujols Gonzalez, Christophe Bouvet. Study of the fracture behaviour in hybrid fibers reinforced thermoplastic laminates: Influence of temperature and initial notch orientation
Influence of temperature and initial notch orientation
Theoretical and Applied Fracture Mechanics, Elsevier, 120, p.103414
| [HAL] / [BIB] / [DOI] |
2022 |
X. Sourd, Redouane Zitoune, Laurent Crouzeix, M. Coulaud. Influence of the texturing quality consecutive to Abrasive Water Jet machining on the adhesive properties in mode I of 3D woven composite assemblies
Composites Part B: Engineering, Elsevier, 242, p.110091
| [HAL] / [BIB] / [DOI] |
2022 |
Jonathan Liscouët, Félix Pollet, Joël Jézégou, Marc Budinger, Scott Delbecq, Jean-Marc Moschetta. A methodology to integrate reliability into the conceptual design of safety-critical multirotor unmanned aerial vehicles
Aerospace Science and Technology, Elsevier, 127, p.107681
| [HAL] / [BIB] / [DOI] |
2022 |
Ated Ben Khalifa, Nessrine Brahem, Sonia Braiek, Redouane Zitoune, Mondher Zidi. Experimental investigation of three-point bending behavior of assembled hybrid composite tubes before and after the fire endurance test
Journal of Composite Materials, SAGE Publications, 56(18), p.2933-2948
| [HAL] / [BIB] / [DOI] |
2022 |
Sughosh Deshpande, Pierre Lagarrigue, Yann Landon, Anna Carla Araujo. Experimental Analysis of Circular Milling for Material Identification in Aerospace Industry
Key Engineering Materials, Trans Tech Publications, 926, p.1650-1659
| [HAL] / [BIB] / [DOI] |
2022 |
Raphaël Morisset, Patrick Gilles, Guillaume Cohen, Michel Gregoire. Characterization of Abrasion and Erosion Mechanisms during Abrasive Waterjet Machining of Hard Metals
Key Engineering Materials, Trans Tech Publications, 926, p.1575-1580
| [HAL] / [BIB] / [DOI] |
2022 |
Abdelhakim Benslimane, Mounir Methia, Roselane Hammoum, Mohamed Amine Khadimallah. Analytical and numerical analysis of an internally and/or externally pressurized thick-walled sphere made of radially nonuniform material
International Journal on Interactive Design and Manufacturing, Springer Verlag
| [HAL] / [BIB] / [DOI] |
2022 |
Zhenhang Wu, Sébastien Seguy, Manuel Paredes. Qualitative analysis of the response regimes and triggering mechanism of bistable NES
Nonlinear Dynamics, Springer Verlag, 109(2), p.323-352
| [HAL] / [BIB] / [DOI] |
2022 |
Sughosh Deshpande, Maria Clara Coimbra Gonçalves, Anna Carla Araujo, Pierre Lagarrigue, Yann Landon. Specific force map for smart machining applications with rotating tools
Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture, SAGE Publications
| [HAL] / [BIB] / [DOI] |
2022 |
Jean-Charles Maré. A Preliminary Top-Down Parametric Design of Electromechanical Actuator Position Control
Aerospace, MDPI, 9(6), p.314
| [HAL] / [BIB] / [DOI] |
2022 |
Khanh T.P. Nguyen, Kamal Medjaher, Christian Gogu. Probabilistic deep learning methodology for uncertainty quantification of remaining useful lifetime of multi-component systems
Reliability Engineering and System Safety, Elsevier, 222, p.108383
| [HAL] / [BIB] / [DOI] |
2022 |
Eduard Marenić, Guillem Seychal, Jean-Charles Passieux. Data driven approach in multiphysics framework: application to coupled electro-mechanical problems
Computer Methods in Applied Mechanics and Engineering, Elsevier, 395, p.114959
| [HAL] / [BIB] / [DOI] |
2022 |
Hannah Lois-Dorothy, Xavier Soldani, Patrice Longère. A parametric numerical study of ASB-assisted chip formation in high-speed machining of Ti-6Al-4V
Advances in Materials and Processing Technologies, Taylor & Francis, p.1-19
| [HAL] / [BIB] / [DOI] |
2022 |
Yves Gourinat, Yulia Akisheva, Aidan Cowley, Laure Boyer, Alexis Paillet. Hybrid Material for Radiation Protection in Lunar Environment
Biomedical Journal of Scientific & Technical Research, Biomedical Research Network, 43(4), p.006931
| [HAL] / [BIB] / [DOI] |
2022 |
Florent Grotto, Samuel Rivallant, Christophe Bouvet. Development of a 3D finite element model at mesoscale for the crushing of unidirectional composites
Application to plates crushing
Composite Structures, Elsevier, 287, p.115346
| [HAL] / [BIB] / [DOI] |
2022 |
Alexis Marbœuf, Marc Budinger, Valérie Pommier-Budinger, Valérian Palanque, Lokman Bennani. Improving mechanical ice protection systems with topology optimization
Structural and Multidisciplinary Optimization, Springer Verlag (Germany), 65(5)
| [HAL] / [BIB] / [DOI] |
2022 |
Yuan Wu, Marie-Laetitia Pastor, Marianne Perrin, Pascal Casari, Xiaojing Gong. A new methodology to predict moisture effects on mechanical behaviors of GFRP-BALSA sandwich by acoustic emission and infrared thermography
Composite Structures, Elsevier, 287, p.115342
| [HAL] / [BIB] / [DOI] |
2022 |
Sagar Kubher, Suhasini Gururaja, Redouane Zitoune. Coupled thermo-mechanical modeling of drilling of multi-directional polymer matrix composite laminates
Composites Part A: Applied Science and Manufacturing, Elsevier, 156, p.106802
| [HAL] / [BIB] / [DOI] |
2022 |
Braedon Hoekstra, Atefeh Shekarian, Kamal Kolasangiani, Donatus C.D. Oguamanam, Redouane Zitoune, Habiba Bougherara. Effect of machining processes on the damage response and surface quality of open hole hybrid carbon/flax composites: An experimental study
Composite Structures, Elsevier, 285, p.115244
| [HAL] / [BIB] / [DOI] |
2022 |
Eric Paroissien, Frederic Lachaud, Sébastien Schwartz. Modelling load transfer in single-lap adhesively bonded and hybrid (bolted / bonded) joints
Progress in Aerospace Sciences, Elsevier, 130, p.100811
| [HAL] / [BIB] / [DOI] |
2022 |
D. Fitton, E. Laurens, N. Hongkarnjanakul, C. Schwob, L. Mezeix. Land cover classification through Convolutional Neur-al Network model assembly: A case study of a local rural area in Thailand
Remote Sensing Applications: Society and Environment, Elsevier, 26, p.100740
| [HAL] / [BIB] / [DOI] |
2022 |
Gaspard Berthelin, Sylvain Dubreuil, Michel Salaün, Nathalie Bartoli, Christian Gogu. Disciplinary Proper Orthogonal Decomposition and Interpolation for the resolution of parametrized Multidisciplinary Analysis
International Journal for Numerical Methods in Biomedical Engineering, John Wiley and Sons
| [HAL] / [BIB] |
2022 |
F. Neveu, C. Cornu, P. Olivier, Bruno Castanié. Manufacturing and impact behaviour of aeronautic overmolded grid-stiffened thermoplastic carbon plates
Composite Structures, Elsevier, 284, p.115228
| [HAL] / [BIB] / [DOI] |
2022 |
Zhenhang Wu, Sébastien Seguy, Manuel Paredes. Basic constraints for design optimization of cubic and bistable NES
Journal of Vibration and Acoustics, American Society of Mechanical Engineers, 144(2), p.021003
| [HAL] / [BIB] / [DOI] |
2022 |
Miguel Ruiz de Sotto, Véronique Doquet, Patrice Longère, Jessica Papasidero. Anisotropic, rate-dependent ductile fracture of Ti-6Al-4V alloy
International Journal of Damage Mechanics, SAGE Publications, 31(3), p.374-402
| [HAL] / [BIB] / [DOI] |
2022 |
Bastien Cadiou, Cyrille Stephan, Adrien Renoult, Guilhem Michon. Damping adjustment of a nonlinear vibration absorber using an electro-magnetomechanical coupling
Journal of Sound and Vibration, Elsevier, 518, p.116508
| [HAL] / [BIB] / [DOI] |
2022 |
Norazrina Mat Jali, Mohd Adnan Firdaus, Patrice Longère. Correlation of Humidity and Mechanical Properties of Different Grades of RT-PMMA
Key Engineering Materials, Trans Tech Publications, 908, p.105-109
| [HAL] / [BIB] / [DOI] |
2022 |
Kean Sheng Tan, Patrice Longère, Norazrina Mat Jali. A SPH-based numerical study of the crack arrest behaviour of rubber toughened PMMA under impact loading
International Journal of Fracture, Springer Verlag
| [HAL] / [BIB] / [DOI] |
2022 |
Nadia Lakreb, Umut Şen, Abdelhakim Beddiar, Redouane Zitoune, Catarina Nobre, M. Glória Gomes, Helena Pereira. Properties of eco-friendly mortars produced by partial cement replacement with waste cork particles: a feasibility study
Biomass Conversion and Biorefinery, Springer
| [HAL] / [BIB] / [DOI] |
2022 |
Placide Uwizeyimana, Marianne Perrin, Emmanuel Laügt, Florent Eyma. Durability study of glulam timber under cyclic moisture loading
Construction and Building Materials, Elsevier, 315, p.125715
| [HAL] / [BIB] / [DOI] |
2022 |
Joan Mas Colomer, Nathalie Bartoli, Thierry Lefebvre, Joseph Morlier. Aeroelastic scaling of flying demonstrators: mode tracking technique
Mechanics & Industry, EDP Sciences, 23, p.2
| [HAL] / [BIB] / [DOI] |
2022 |
Sylvain Corveleyn, Frederic Lachaud, Florentin Berthet, Claude Rossignol. Long-term creep behavior of a short carbon fiber-reinforced PEEK at high temperature: Experimental and modeling approach
Composite Structures, Elsevier, 290, p.115485
| [HAL] / [BIB] / [DOI] |
2022 |
Noémie Martin, Anis Hor, Etienne Copin, Philippe Lours, Léon Ratsifandrihana. Correlation between microstructure heterogeneity and multi-scale mechanical behavior of hybrid LPBF-DED Inconel 625
Journal of Materials Processing Technology, Elsevier, 303, p.117542
| [HAL] / [BIB] / [DOI] |
2022 |
Valerian Palanque, E. Villeneuve, Marc Budinger, V. Pommier-Budinger, G. Momen. Cohesive strength and fracture toughness of atmospheric ice
Cold Regions Science and Technology, Elsevier, 204, p.103679
| [HAL] / [BIB] / [DOI] |
2022 |
Tarek Younsi, Christine Boher, Adriana Soveja. Influence of Interlayer Time on the Microstructural State of CoCrMo Coatings Applied by Selective Laser Melting on an Iron-based Substrate for Different Numbers of Layers
Materials Today Communications, Elsevier, 32, p.103776
| [HAL] / [BIB] / [DOI] |
2022 |
Clément Rongier, Rémi Gilblas, Yannick Le Maoult, S. Belkessam, Fabrice Schmidt. Infrared thermography applied to the validation of thermal simulation of high luminance LED used in automotive front lighting
Review
Infrared Physics and Technology, Elsevier, 120, p.103980
| [HAL] / [BIB] / [DOI] |
2022 |
X Sourd, K Giasin, Redouane Zitoune, Mehdi Salem, Colin Lupton. Multi-scale analysis of the damage and contamination in abrasive water jet drilling of GLARE fibre metal laminates
Journal of Manufacturing Processes, Society of Manufacturing Engineers, 84, p.610 - 621
| [HAL] / [BIB] / [DOI] |
2022 |
Yann Landon, Alexandra Lacombe, Landry Arnaud Kamgaing Souop, Alain Daidié, Manuel Paredes, Clément Chirol, Audrey Benaben. Impact of the drilling process on the surface integrity and residual fatigue strength of 2024-T351 aluminum parts
Procedia CIRP, ELSEVIER, 108, p.459 - 464
| [HAL] / [BIB] / [DOI] |
2022 |
Adrian Korycki, Christian Garnier, Margot Bonmatin, Elisabeth Laurent, France Chabert. Assembling of Carbon Fibre/PEEK Composites: Comparison of Ultrasonic, Induction, and Transmission Laser Welding
Materials, MDPI, 15(18), p.6365
| [HAL] / [BIB] / [DOI] |
2022 |
Noémie Martin, Anis Hor, Etienne Copin, Philippe Lours, Léon Ratsifandrihana. Impact of annealing treatment on the fatigue behavior of Inconel 625 produced by laser‐based powder bed fusion
Fatigue and Fracture of Engineering Materials and Structures, Wiley-Blackwell, 45(4), p.1258-1275
| [HAL] / [BIB] / [DOI] |
2022 |
Danijela Stupar, Grégoire Chabrol, Abdoul Razak, Sylvain Lecler, Alexandre Tessier, Thierry Cutard, Jocelyne Miehe-Brendle. Feasibility of additive manufacturing processes for lunar soil simulants
Advanced Technologies & Materials, University of Novi Sad, 47(1), p.39-43
| [HAL] / [BIB] / [DOI] |
2022 |
Rébecca Bonnaire, Woo Suck Han, Reynald Convert, Paul Calmels, Jérôme Molimard. Feasibility of a Full-Field Measurements-Based Protocol for the Biomechanical Study of a Lumbar Belt: A Case Study
Biomechanics, MDPI, 2(2), p.174-188
| [HAL] / [BIB] / [DOI] |
2022 |
Anh-Duc Le, Rémi Gilblas, Vincent Lucin, Yannick Le Maoult, Fabrice Schmidt. Infrared heating modeling of recycled PET preforms in injection stretch blow molding process
International Journal of Thermal Sciences, Elsevier, 181, p.107762
| [HAL] / [BIB] / [DOI] |
2022 |
Sabrina Otmani, Guilhem Michon, Bruno Watier. Spasticity model based on muscular activations using genetic algorithm
Computer Methods in Biomechanics and Biomedical Engineering, Taylor & Francis
| [HAL] / [BIB] |
2022 |
Vincent Schenk, Karine Labastie, Mathias Destarac, Philippe Olivier, Marc Guerre. Vitrimer composites: current status and future challenges
Materials Advances, Royal Society of Chemistry
| [HAL] / [BIB] / [DOI] |
2022 |
Ignacio Fuenzalida-Henriquez, Paul Oumaziz, Emilio Castillo-Ibarra, Jorge Hinojosa. Global-Local non intrusive analysis with robin parameters: application to plastic hardening behavior and crack propagation in 2D and 3D structures
Computational Mechanics, Springer Verlag
| [HAL] / [BIB] / [DOI] |
2022 |
Géromine Fournier, Delphine Maret, Sylvie Duchesne, Norbert Telmon, Franck Diemer, Frédéric Savall. Root and canal morphology of the permanent teeth in medieval and current French population
Archives of Oral Biology, Elsevier, 140, p.105452
| [HAL] / [BIB] |
2022 |
Braedon Hoekstra, Kamal Kolasangiani, Donatus Oguamanam, Redouane Zitoune, Habiba Bougherara. Role of conventional drilling and abrasive water jet induced damage on the mechanical response of flax/epoxy laminates with holes
Proceedings of the Institution of Mechanical Engineers, Part L: Journal of Materials: Design and Applications, SAGE Publications, p.146442072211023
| [HAL] / [BIB] / [DOI] |
2022 |
Seyedmohammad Tabaie, Farhad Rezai-Aria, Bertrand C.D. Flipo, Mohammad Jahazi. Dissimilar linear friction welding of selective laser melted Inconel 718 to forged Ni-based superalloy AD730TM: evolution of strengthening phases
Journal of Materials Science and Technology, Elsevier, 96, p.248-261
| [HAL] / [BIB] / [DOI] |
2022 |
Mahdi Masoumi Khalilabad, Yasser Zedan, Damien Texier, Mohammad Jahazi, Philippe Bocher. Effect of heat treatments on microstructural and mechanical characteristics of dissimilar friction stir welded 2198/2024 aluminum alloys
Journal of Adhesion Science and Technology, Taylor & Francis, 36(3), p.221-239
| [HAL] / [BIB] / [DOI] |
2022 |
Quentin Govignon, Florentin Berthet, Ludovic Moulin, Olivier Mantaux, A Faure, Arnaud Gillet. Le recyclage des composites
bulletin de l' AMAC, p.1-28
| [HAL] / [BIB] |
2022 |
Pierre Journoud, Christophe Bouvet, Bruno Castanié, Léon Ratsifandrihana. Experimental analysis of the effects of wrinkles in the radius of curvature of L-shaped carbon-epoxy specimens on unfolding failure
Composites Part A: Applied Science and Manufacturing, Elsevier, 158, p.106975
| [HAL] / [BIB] / [DOI] |
2022 |
Olivier de Almeida, Lisa Feuillerat, Jean-Charles Fontanier, Fabrice Schmidt. Determination of a degradation-induced limit for the consolidation of CF/PEEK composites using a thermo-kinetic viscosity model
Composites Part A: Applied Science and Manufacturing, Elsevier, 158, p.106943
| [HAL] / [BIB] / [DOI] |
2022 |
Mf Ameur, A Hadj Djilani, R Zitoune, Krishnaraj V, J Sheikh-Ahmad, L Toubal, H Bougherara. Experimental and numerical investigations of the damages induced while drilling flax/epoxy composite
Journal of Composite Materials, SAGE Publications, 56(2), p.295-312
| [HAL] / [BIB] / [DOI] |
2022 |
Philippe Seitier, Patrick Gilles, Valérie Boudier, Michel Galaup, Pierre Lagarrigue. Getting started procedure of a NC machine simplified by the use of a mixed-reality training scenario
MATEC Web of Conferences, EDP sciences, 368
| [HAL] / [BIB] / [DOI] |
2022 |
R. Guélou, Florent Eyma, Arthur Cantarel, Samuel Rivallant, Bruno Castanié. A comparison of three wood species (poplar, birch and oak) for crash application
European Journal of Wood and Wood Products, Springer Verlag
| [HAL] / [BIB] / [DOI] |
2022 |
Abdelrahman Abubakr, Igor Jovančević, Nour Islam Mokhtari, Hamdi Ben Abdallah, Jean-José Orteu. Learning deep domain-agnostic features from synthetic renders for industrial visual inspection
Journal of Electronic Imaging, SPIE and IS&T, 31(05), p.051604
| [HAL] / [BIB] / [DOI] |
2022 |
Morgane Chapelier, Robin Bouclier, Jean-Charles Passieux. Spline-based specimen shape optimization for robust material model calibration
Advanced Modeling and Simulation in Engineering Sciences, Springer, 9(1), p.4
| [HAL] / [BIB] / [DOI] |
2022 |
Edouard Duriez, Joseph Morlier, Catherine Azzaro-Pantel, M. Charlotte. Ecodesign with topology optimization
Procedia CIRP, ELSEVIER, 109, p.454-459
| [HAL] / [BIB] / [DOI] |
2022 |
A. Bigand, Christine Espinosa, J.M. Bauchire. Equivalent mechanical load model methodology to simulate lightning strike impact on protected and painted composite structure
Composite Structures, Elsevier, 280, p.114886
| [HAL] / [BIB] / [DOI] |
2022 |
Vincent Proulx-Cabana, Minh Tuan Nguyen, Sébastien Prothin, Guilhem Michon, Eric Laurendeau. A Hybrid Non-Linear Unsteady Vortex Lattice-Vortex Particle Method for Rotor Blades Aerodynamic Simulations
Fluids, MDPI, 7(2), p.81
| [HAL] / [BIB] / [DOI] |
2022 |
William Han, Quentin Govignon, Arthur Cantarel, Fabrice Schmidt. Efficient polymerization and crystallization kinetics coupling of polyamide 6 synthesis for liquid composite molding process modeling
Polymer Engineering and Science, Wiley-Blackwell, 62(4), p.999-1012
| [HAL] / [BIB] / [DOI] |
2022 |
Pierre Journoud, Christophe Bouvet, Bruno Castanié, Leon Ratsifandrihana. Experimental and numerical compressive tests on curved laminate structures with embedded wrinkles
Mechanics of Advanced Materials and Structures, Taylor & Francis, p.1-21
| [HAL] / [BIB] / [DOI] |
2022 |
Benaïssa Malek, Michel Chaussumier, Catherine Mabru. Effect of anodization and loading on fatigue life of 2618-T851 aluminum alloy
International Journal of Fracture, Springer Verlag
| [HAL] / [BIB] / [DOI] |
2022 |
Ali Rouwane, Robin Bouclier, Jean-Charles Passieux, Jean-Noël Périé. Architecture-Driven Digital Image Correlation Technique (ADDICT) for the measurement of sub-cellular kinematic fields in speckle-free cellular materials
International Journal of Solids and Structures, Elsevier, 234-235, p.111223
| [HAL] / [BIB] / [DOI] |
2022 |
Xiaoyu Liang, Anis Hor, Camille Robert, Mehdi Salem, Franck Morel. Correlation between microstructure and cyclic behavior of 316L stainless steel obtained by Laser Powder Bed Fusion
Fatigue and Fracture of Engineering Materials and Structures, Wiley-Blackwell, 45(5), p.1505-1520
| [HAL] / [BIB] / [DOI] |
2022 |
Ali Kalush, Damien Texier, Maxime Ecochard, Quentin Sirvin, Karim Choquet, Thomas Gheno, Nicolas Vanderesse, Walid Jomaa, Philippe Bocher. Size effects on high temperature oxidation of MCrAlY coatings processed via APS and HVOF depositions
Surface and Coatings Technology, Elsevier, 440, p.128483
| [HAL] / [BIB] / [DOI] |
2022 |
Hugo Roirand, Anis Hor, Benoit Malard, Nicolas Saintier. Effect of laser‐scan strategy on microstructure and fatigue properties of 316L additively manufactured stainless steel
Fatigue and Fracture of Engineering Materials and Structures, Wiley-Blackwell
| [HAL] / [BIB] / [DOI] |
2022 |
Margot Bonmatin, France Chabert, Gérard Bernhart, Thierry Cutard, Toufik Djilali. Ultrasonic welding of CF/PEEK composites: Influence of welding parameters on interfacial temperature profiles and mechanical properties
Composites Part A: Applied Science and Manufacturing, Elsevier, 162, p.107074
| [HAL] / [BIB] / [DOI] |
2022 |
Stéphane Colin, José M Fernández, Christine Barrot-Lattes, Lucien Baldas, Slaven Bajić, Marcos Rojas-Cárdenas. Review of optical thermometry techniques for flows at the microscale towards their applicability to gas microflows
Micromachines, MDPI, 13(11), p.1819
| [HAL] / [BIB] / [DOI] |
2022 |
Joel Serra, Christophe Bouvet, Prajwal Karinja Haridas, Léon Ratsifandrihana. Numerical simulations of combined size effects acting on an open-hole laminated composite plate under tension
Journal of Composite Materials, SAGE Publications
| [HAL] / [BIB] / [DOI] |
2022 |
Marie Doumeng, Florentin Berthet, Karl Delbé, Olivier Marsan, Jean Denape, France Chabert. Effect of size, concentration, and nature of fillers on crystallinity, thermal, and mechanical properties of polyetheretherketone composites
Journal of Applied Polymer Science, Wiley, 139(5), p.51574
| [HAL] / [BIB] / [DOI] |
2022 |
Emmanuel Nigito, Franck Diemer, S. Husson, S.F. Ou, M.H. Tsai, Farhad Rezai-Aria. Microstructure of NiTi superelastic alloy manufactured by selective laser melting
Materials Letters, Elsevier, 324, p.132665
| [HAL] / [BIB] / [DOI] |
2022 |
Xiaoyu Liang, Anis Hor, Camille Robert, Mehdi Salem, Feng Lin, Franck Morel. High cycle fatigue behavior of 316L steel fabricated by laser powder bed fusion: effects of surface defect and loading mode
International Journal of Fatigue, Elsevier, 160, p.106843
| [HAL] / [BIB] / [DOI] |
2022 |
Achraf Belkhiri, Nick Virgilio, Valérie Nassiet, Hélène Welemane, France Chabert, Olivier de Almeida. Tailoring the Hydroxyl Density of Glass Surface for Anionic Ring-Opening Polymerization of Polyamide 6 to Manufacture Thermoplastic Composites
Polymers, MDPI, 14(17), p.3663
| [HAL] / [BIB] / [DOI] |
2021 |
Thomas Gheno, Catherine Rio, Maxime Ecochard, Damien Texier. Alumina Failure and Post-failure Oxidation in the NiCoCrAlY Alloy System at High Temperature
Oxidation of Metals, Springer Verlag, 96(5-6), p.487-517
| [HAL] / [BIB] / [DOI] |
2021 |
Anthea Comellini, Jerome Le Ny, Emmanuel Zenou, Christine Espinosa, Vincent Dubanchet. Global Descriptors for Visual Pose Estimation of a Non-Cooperative Target in Space Rendezvous
IEEE Transactions on Aerospace and Electronic Systems, Institute of Electrical and Electronics Engineers, 57(6), p.4197-4212
| [HAL] / [BIB] / [DOI] |
2021 |
Florian Mitjana, Sonia Cafieri, Florian Bugarin, Stéphane Segonds, F Castanie, P Duysinx. Topological gradient in structural optimization under stress and buckling constraints
Applied Mathematics and Computation, Elsevier, 409
| [HAL] / [BIB] / [DOI] |
2021 |
Sabrina Otmani, Marco Marchitto, Guilhem Michon, Bruno Watier. Comparison of adults and children anthropometric tables: center of mass and moment of inertia
Computer Methods in Biomechanics and Biomedical Engineering, Taylor & Francis, 24(sup1), p.S209-S211
| [HAL] / [BIB] / [DOI] |
2021 |
Morgane Menz, Sylvain Dubreuil, Jérôme Morio, Christian Gogu, Nathalie Bartoli, Marie Chiron. Variance based sensitivity analysis for Monte Carlo and importance sampling reliability assessment with Gaussian processes
Structural Safety, Elsevier, 93, p.102116
| [HAL] / [BIB] / [DOI] |
2021 |
Melissa Semaan, Victor Castex, Eneko Ruiz Arramendy, Manuel Paredes. Improvement of the Method for Fixing a Punch in the Punch Holder
Applied Sciences, Multidisciplinary digital publishing institute (MDPI), 11(22), p.11013
| [HAL] / [BIB] / [DOI] |
2021 |
A D Cochrane, Joël Serra, J K Lander, I K Partridge, H Böhm, T Wollmann, A Hornig, M Gude, S R Hallett. Experimental investigation of large-scale high-velocity soft-body impact on composite laminates
International Journal of Impact Engineering, Elsevier
| [HAL] / [BIB] / [DOI] |
2021 |
Carmelo Gómez, David Piñero, Manuel Paredes, Jorge Alió, Francisco Cavas. Iterative Methods for the Biomechanical Evaluation of Corneal Response. A Case Study in the Measurement Phase
Applied Sciences, Multidisciplinary digital publishing institute (MDPI), 11(22), p.10819
| [HAL] / [BIB] / [DOI] |
2021 |
Joel Serra, A Trellu, Christophe Bouvet, Samuel Rivallant, Bruno Castanié, L Ratsifandrihana. Combined loadings after medium velocity impact on large CFRP laminated plates: Discrete ply model simulations
Composites Part C: Open Access, Elsevier, 6
| [HAL] / [BIB] / [DOI] |
2021 |
Romain Guélou, Florent Eyma, Arthur Cantarel, Samuel Rivallant, Bruno Castanié. Dynamic crushing of wood-based sandwich composite tubes
Mechanics of Advanced Materials and Structures, Taylor & Francis, p.1-21
| [HAL] / [BIB] / [DOI] |
2021 |
Krishnaraj Vilasraj Bhat, Gabriele Capasso, Simone Coniglio, Joseph Morlier, Christian Gogu. On some applications of Generalized Geometric Projection to optimal 3D printing
Computers and Graphics, Elsevier
| [HAL] / [BIB] / [DOI] |
2021 |
R. Guélou, Florent Eyma, Arthur Cantarel, Samuel Rivallant, Bruno Castanié. Static crushing of wood based sandwich composite tubes
Composite Structures, Elsevier, 273, p.114317
| [HAL] / [BIB] / [DOI] |
2021 |
Ldjoudi Manseri, Pablo Navarro, Olivier Dorival, Steven Marguet, Bassam Mahmoud, Jean-François Ferrero. Development of a hybrid element to model intralaminar damage in thick composite plates under impact loading
Composites Part B: Engineering, Elsevier, 222, p.109024
| [HAL] / [BIB] / [DOI] |
2021 |
X. Sourd, Redouane Zitoune, Laurent Crouzeix, M. Coulaud, D. Lamouche. Influence of the damage generated by abrasive water jet texturing on the tensile static and fatigue behaviour of 3D woven composite in the context of repair
Composites Part A: Applied Science and Manufacturing, Elsevier, 149, p.106567
| [HAL] / [BIB] / [DOI] |
2021 |
Paul Oumaziz, Pierre Gosselet, Karin Saavedra, Nicolas Tardieu. Analysis, improvement and limits of the multiscale Latin method
Computer Methods in Applied Mechanics and Engineering, Elsevier, 384, p.113955
| [HAL] / [BIB] / [DOI] |
2021 |
Morgane Chapelier, Robin Bouclier, Jean-Charles Passieux. Free-Form Deformation Digital Image Correlation (FFD-DIC): a non-invasive spline regularization for arbitrary finite element measurements
Computer Methods in Applied Mechanics and Engineering, Elsevier, 384, p.113992
| [HAL] / [BIB] / [DOI] |
2021 |
Jean-Charles Maré. Review and Analysis of the Reasons Delaying the Entry into Service of Power-by-Wire Actuators for High-Power Safety-Critical Applications
Actuators, MDPI
| [HAL] / [BIB] / [DOI] |
2021 |
Raphaël Fouque, Robin Bouclier, Jean-Charles Passieux, Jean-Noël Périé. Stereo digital image correlation: formulations and perspectives
Comptes Rendus. Mécanique, Académie des sciences (Paris), 349(3), p.453-463
| [HAL] / [BIB] / [DOI] |
2021 |
Julien Philippe, Muriel Ferry, Samuel Charlot, Sandrine Assié-Souleille, Aurélie Lecestre, Guillaume Libaude, André Ferrand, Patrick Pons, Hervé Aubert. Microelectromechanical Transducer to Monitor High-Doses of Nuclear Irradiation
Sensors, MDPI, 21(17), p.5912
| [HAL] / [BIB] / [DOI] |
2021 |
B. Debich, A. Yaich, K. Dammak, A. El Hami, W. Gafsi, L. Walha, M. Haddar. Integration of multi-objective reliability-based design optimization into thermal energy management: Application on phase change material-based heat sinks
Journal of Energy Storage, Elsevier, 41, p.102906
| [HAL] / [BIB] / [DOI] |
2021 |
Ye Pyae Sone Oo, Hervé Le Sourne, Olivier Dorival. A coupled closed-form/Doubly Asymptotic Approximation approach for the response of orthotropic plates subjected to an underwater explosion
Ships and Offshore Structures, Taylor & Francis, 16(sup1), p.171-185
| [HAL] / [BIB] / [DOI] |
2021 |
Edouard Duriez, Joseph Morlier, Miguel Charlotte, Catherine Azzaro-Pantel. A well connected, locally-oriented and efficient multi-scale topology optimization (EMTO) strategy
Structural and Multidisciplinary Optimization, Springer Verlag (Germany), 64(2)
| [HAL] / [BIB] / [DOI] |
2021 |
M. Ginot, Michele d'Ottavio, Olivier Polit, Christophe Bouvet, Bruno Castanié. Benchmark of wrinkling formulae and methods for pre-sizing of aircraft lightweight sandwich structures
Composite Structures, Elsevier, 273, p.114387
| [HAL] / [BIB] / [DOI] |
2021 |
Felipe A. C. Viana, Christian Gogu, Tushar Goel. Surrogate modeling: tricks that endured the test of time and some recent developments
Structural and Multidisciplinary Optimization, Springer Verlag (Germany), 31 p.
| [HAL] / [BIB] / [DOI] |
2021 |
A. Rogani, Pablo Navarro, Steven Marguet, Jean-François Ferrero. Study of post-impact behaviour of thin carbon/epoxy laminates subject to fatigue tensile loading
International Journal of Fatigue, Elsevier, 148, p.106134
| [HAL] / [BIB] / [DOI] |
2021 |
Ruodi Jia, Libin Zhao, Rémi Curti, Xiaojing Gong. Determination of pure mode-I fracture toughness of multidirectional composite DCB specimens
Engineering Fracture Mechanics, Elsevier, 252, p.107776
| [HAL] / [BIB] / [DOI] |
2021 |
Marc Budinger, Valérie Pommier-Budinger, Aurelien Reysset, Valerian Palanque. Electro-mechanical Resonant Ice Protection Systems: Energetic and Power Considerations
AIAA Journal, American Institute of Aeronautics and Astronautics, 59(7), p.2590-2602
| [HAL] / [BIB] / [DOI] |
2021 |
Usama Khashaba, Mohamed Abd-Elwahed, Ismai Najjar, Ammar Melaibari, Khaled Ahmed, Redouane Zitoune, Mohamed Eltaher. Heat-Affected Zone and Mechanical Analysis of GFRP Composites with Different Thicknesses in Drilling Processes
Polymers, MDPI, 13(14), p.2246
| [HAL] / [BIB] / [DOI] |
2021 |
Khaled Hallak, Fulbert Baudoin, Virginie Griseri, Florian Bugarin, Stephane Segonds. A New Approach for Optimizing a Bipolar Charge Transport Model for Dielectric Materials: Theoretical Framework
IEEE Transactions on Dielectrics and Electrical Insulation, Institute of Electrical and Electronics Engineers, 28(3), p.872-879
| [HAL] / [BIB] / [DOI] |
2021 |
L Quiroga Cortes, Leonardo Sanches, Camille Bessaguet, Mathieu Chevalier, Colette Lacabanne, Eric Dantras, Guilhem Michon. Improving damping capabilities of composites structures by electroactive films containing piezoelectric and conductive fillers
Smart Materials and Structures, IOP Publishing, 30(8), p.085008
| [HAL] / [BIB] / [DOI] |
2021 |
Matthieu Labat, Ion Hazyuk, Matthieu Cezard, Sylvie Lorente. Indoor thermal behaviour of an office equipped with a ventilated slab: a numerical study
Journal of Building Performance Simulation, Taylor & Francis, 14(3), p.227-246
| [HAL] / [BIB] / [DOI] |
2021 |
Rémi Curti, B. Marcon, L. Denaud, M. Togni, R. Furferi, G. Goli. Generalized cutting force model for peripheral milling of wood, based on the effect of density, uncut chip cross section, grain orientation and tool helix angle
European Journal of Wood and Wood Products, Springer Verlag, 79(3), p.667-678
| [HAL] / [BIB] / [DOI] |
2021 |
Naomi Murdoch, Mélanie Drilleau, Cecily Sunday, Florian Thuillet, Arnaud Wilhelm, Gautier Nguyen, Yves Gourinat. Low-velocity impacts into granular material: application to small-body landing
Monthly Notices of the Royal Astronomical Society, Oxford University Press (OUP): Policy P - Oxford Open Option A, 503(3)
| [HAL] / [BIB] / [DOI] |
2021 |
Thibaut Paty, Nicolas Binaud, Stéphane Caro, Stéphane Segonds. Cable-Driven Parallel Robot Modelling Considering Pulley Kinematics and Cable Elasticity
Mechanism and Machine Theory, Elsevier, 159, p.104263
| [HAL] / [BIB] / [DOI] |
2021 |
Thiago Birro, Maëlenn Aufray, Eric Paroissien, Frédéric Lachaud. Assessment of interface failure behaviour for brittle adhesive using the three-point bending test
International Journal of Adhesion and Adhesives, Elsevier, 110, p.1-20
| [HAL] / [BIB] / [DOI] |
2021 |
Imed Boughdiri, Khaled Giasin, Tarek Mabrouki, Redouane Zitoune. Effect of cutting parameters on thrust force, torque, hole quality and dust generation during drilling of GLARE 2B laminates
Composite Structures, Elsevier, 261, p.113562
| [HAL] / [BIB] / [DOI] |
2021 |
Khaled Giasin, Antigoni Barouni, Hom Nath Dhakal, Carol Featherson, Redouane Zitoune, Sezer Morkavuk, Ugur Koklu. Microstructural investigation and hole quality evaluation in S2/FM94 glass-fibre composites under dry and cryogenic conditions
Journal of Reinforced Plastics and Composites, SAGE Publications, 40(7-8), p.273-293
| [HAL] / [BIB] / [DOI] |
2021 |
Walid Nehme, Stephanie Araji, Jérôme Michetti, Carla Zogheib, Alfred Naaman, Issam Khalil, Raphaël Pages, Adrian Basarab, Jean Philippe Mallet, Franck Diemer. Assessment of root canal transportation of 2Shape and ProTaper gold in mandibular molar mesial canals: A micro–computed tomographic study
Microscopy Research and Technique, Wiley, 84(4), p.746-752
| [HAL] / [BIB] / [DOI] |
2021 |
Juan Daniel Pujols Gonzalez, Benoît Vieille, Christophe Bouvet. High temperature translaminar fracture of woven-ply thermoplastic laminates in tension and in compression
Engineering Fracture Mechanics, Elsevier, 246, p.107616
| [HAL] / [BIB] / [DOI] |
2021 |
Tohme Tohme, Pascale Magaud, Lucien Baldas. Transport of Non-Spherical Particles in Square Microchannel Flows: A Review
Micromachines, MDPI, 12(3), p.277
| [HAL] / [BIB] / [DOI] |
2021 |
Sagar Kubher, Suhasini Gururaja, Redouane Zitoune. In-situ cutting temperature and machining force measurements during conventional drilling of carbon fiber polymer composite laminates
Journal of Composite Materials, SAGE Publications, p.002199832199807
| [HAL] / [BIB] / [DOI] |
2021 |
Luis Espinosa, Elise Doveri, Simon Bernard, Vadim Monteiller, Régine Guillermin, Philippe Lasaygues. Ultrasonic Imaging of High-contrasted Objects Based on Full-waveform Inversion: Limits under Fluid Modeling
Ultrasonic Imaging, SAGE Publications (UK and US), 43(2), p.88-99
| [HAL] / [BIB] / [DOI] |
2021 |
A. Rogani, Pablo Navarro, Steven Marguet, Jean-François Ferrero, C. Lanouette. Study of post-impact behaviour of thin hybrid carbon/epoxy and glass/epoxy woven composite laminates under fatigue tensile loading – Part I : Experimental study
Composite Structures, Elsevier, 260, p.113449
| [HAL] / [BIB] / [DOI] |
2021 |
A. Rogani, Pablo Navarro, Steven Marguet, Jean-François Ferrero, C. Lanouette. Study of post-impact behaviour of thin hybrid carbon/epoxy and glass/epoxy woven composite laminates under fatigue tensile loading – Part II: Numerical study
Composite Structures, Elsevier, 260, p.113451
| [HAL] / [BIB] / [DOI] |
2021 |
Joan Mas Colomer, Nathalie Bartoli, Thierry Lefebvre, Joaquim R R A Martins, Joseph Morlier. An MDO-based methodology for static aeroelastic scaling of wings under non-similar flow
Structural and Multidisciplinary Optimization, Springer Verlag (Germany)
| [HAL] / [BIB] / [DOI] |
2021 |
Geneviève Mkadara, Jean-Charles Maré, Gregor Paulmann. Methodology for Model Architecting and Failure Simulation Supported by Bond-Graphs—Application to Helicopter Axial Piston Pump
Sustainability, MDPI, 13(4), p.1863
| [HAL] / [BIB] / [DOI] |
2021 |
Frederic Lachaud, Mathieu Boutin, Christine Espinosa, David Hardy. Failure prediction of a new sandwich panels based on flax fibres reinforced epoxy bio-composites
Composite Structures, Elsevier, 257, p.113361
| [HAL] / [BIB] / [DOI] |
2021 |
Ahmed Yaich, Fatma Abid, Tarek Merzouki, Abdelkhalak El Hami, Lassaad Walha, Mohamed Haddar. A robust method for the reliability-based design optimization of shape memory alloy actuator
Mechanics Based Design of Structures and Machines, Taylor & Francis, 51(3), p.1563-1581
| [HAL] / [BIB] / [DOI] |
2021 |
Konstantinos Nikolakopoulos, Jean-Philippe Crété, Patrice Longère. Progressive failure of ductile metals: Description via a three-dimensional coupled CZM-XFEM based approach
Engineering Fracture Mechanics, Elsevier, 243, p.107498
| [HAL] / [BIB] / [DOI] |
2021 |
Abdelmagid El Bakali, Rémi Gilblas, Thomas Pottier, Adrien Lieurey, Yannick Le Maoult. Effect of oxidation on spectral and integrated emissivity of Ti-6Al-4V alloy at high temperatures
Journal of Alloys and Compounds, Elsevier, 889, p.1-11/161545
| [HAL] / [BIB] / [DOI] |
2021 |
A Miranda, M Leite, L Reis, Etienne Copin, Mf Vaz, Am Deus. Evaluation of the influence of design in the mechanical properties of honeycomb cores used in composite panels
Proceedings of the Institution of Mechanical Engineers, Part L: Journal of Materials: Design and Applications, SAGE Publications, 235(6), p.1325-1340
| [HAL] / [BIB] / [DOI] |
2021 |
Seyedmohammad Tabaie, Farhad Rezai-Aria, Bertrand Flipo, Mohammad Jahazi. Grain size and misorientation evolution in linear friction welding of additively manufactured IN718 to forged superalloy AD730™
Materials Characterization, Elsevier, 171, p.1-13/110766
| [HAL] / [BIB] / [DOI] |
2021 |
Guillaume Cadet, Manuel Paredes, Hervé Orcière. Improved analytical model for cylindrical compression springs not ground considering end behavior of end coils
Mechanics & Industry, EDP Sciences, 22, p.50
| [HAL] / [BIB] / [DOI] |
2021 |
A.O. Mosleh, A.D. Kotov, Vanessa Vidal, A.G. Mochugovskiy, Vincent Velay, A.V. Mikhaylovskaya. Initial microstructure influence on Ti-Al-Mo-V alloy’s superplastic deformation behavior and deformation mechanisms
Materials Science and Engineering: A, Elsevier, 802, p.1-10/140626
| [HAL] / [BIB] / [DOI] |
2021 |
Raphaël Fouque, Robin Bouclier, Jean-Charles Passieux, Jean-Noël Périé. Fractal Pattern for Multiscale Digital Image Correlation
Experimental Mechanics, Society for Experimental Mechanics, 61, p.483–497
| [HAL] / [BIB] / [DOI] |
2021 |
M. Doumeng, L. Makhlouf, Florentin Berthet, O. Marsan, Karl Delbé, Jean Denape, France Chabert. A comparative study of the crystallinity of Polyetheretherketone by using density, DSC, XRD, and Raman spectroscopy techniques
Polymer Testing, Elsevier, 93, p.1-10/106878
| [HAL] / [BIB] / [DOI] |
2021 |
William Garat, Monica Francesca Pucci, Romain Léger, Quentin Govignon, Florentin Berthet, Didier Perrin, Patrick Ienny, Pierre-Jacques Liotier. Surface energy determination of fibres for Liquid Composite Moulding processes: method to estimate equilibrium contact angles from static and quasi-static data
Colloids and Surfaces A: Physicochemical and Engineering Aspects, Elsevier, 611, p.1-7/125787
| [HAL] / [BIB] / [DOI] |
2021 |
Yanfeng Gao, Pascale Magaud, Lucien Baldas, Yanping Wang. Inertial Migration of Neutrally Buoyant Spherical Particles in Square Channels at Moderate and High Reynolds Numbers
Micromachines, MDPI, 12(2), p.198
| [HAL] / [BIB] / [DOI] |
2021 |
Morgane Geyer, Vanessa Vidal, Thomas Pottier, Christine Boher, Farhad Rezai-Aria. Investigations on the material flow and the role of the resulting hooks on the mechanical behaviour of dissimilar friction stir welded Al2024-T3 to Ti-6Al-4V overlap joints
Journal of Materials Processing Technology, Elsevier, 292, p.1-15/117057
| [HAL] / [BIB] / [DOI] |
2021 |
Laurent Beauregard, Annafederica Urbano, Stéphanie Lizy-Destrez, Joseph Morlier. Multidisciplinary Design and Architecture Optimization of a Reusable Lunar Lander
Journal of Spacecraft and Rockets, American Institute of Aeronautics and Astronautics, p.1-14
| [HAL] / [BIB] / [DOI] |
2021 |
Mahfoud Herraz, Jean-Max Redonnet, Mohammed Sbihi, Marcel Mongeau. Toolpath planning optimization for end milling of free-form surfaces using a clustering algorithm
Procedia CIRP, ELSEVIER, 99, p.139-144
| [HAL] / [BIB] / [DOI] |
2021 |
Stella Ancey-Rocchi, Vanessa Vidal, Thibault Poulain, Thomas Billot, Denis Bechet, Nicolas Binot, Vincent Huleux, Moukrane Dehmas, Denis Delagnes. Influence of Austenitization Parameters on the Precipitation Sequence and the Chemical Homogenization of Austenite in a High-Performance Fe–Ni–Cr–Al–Ti–Mo Stainless Maraging Steel
Metallurgical and Materials Transactions A, Springer Verlag/ASM International, 52(10), p.4623–4635
| [HAL] / [BIB] / [DOI] |
2021 |
Lisa Feuillerat, Olivier de Almeida, Jean-Charles Fontanier, Carole Aubry, Pascal Rumeau, Fabrice Schmidt. Effect of melt spinning on the integrity of poly(ether ether ketone) for commingled yarn based composite preforms
Polymer Degradation and Stability, Elsevier, 191, p.109686
| [HAL] / [BIB] / [DOI] |
2021 |
Lorena Cano Salinas, Kamel Moussaoui, Akshay Hejjaji, Mehdi Salem, Anis Hor, Redouane Zitoune. Influence of abrasive water jet parameters on the surface integrity of Inconel 718
International Journal of Advanced Manufacturing Technology, Springer Verlag, 114, p.997-1009
| [HAL] / [BIB] / [DOI] |
2021 |
A.X.H. Yong, A. Aktas, D. May, A. Endruweit, S.V. Lomov, S. Advani, P. Hubert, S.G. Abaimov, D. Abliz, I. Akhatov, M.A. Ali, Samir Allaoui, T. Allen, D.C. Berg, S. Bickerton, B. Caglar, P. Causse, A. Chiminelli, S. Comas-Cardona, M. Danzi, J. Dittmann, C. Dransfeld, P. Ermanni, E. Fauster, A. George, Jean Gillibert, Quentin Govignon, R. Graupner, V. Grishaev, A. Guilloux, M.A. Kabachi, A. Keller, K. Kind, D. Large, M. Laspalas, O.V. Lebedev, M Lizaranzu, A.C. Long, C López, K. Masania, V. Michaud, P. Middendorf, P. Mitschang, S. van Oosterom, R. Schubnel, N. Sharp, P. Sousa, F. Trochu, R. Umer, J. Valette, J.H. Wang. Experimental characterisation of textile compaction response: a benchmark exercise
Composites Part A: Applied Science and Manufacturing, Elsevier, 142, p.1-16/106243
| [HAL] / [BIB] / [DOI] |
2021 |
Pamir Ghimire, Igor Jovančević, Jean-José Orteu. Learning Local Descriptor for Comparing Renders with Real Images
Applied Sciences, Multidisciplinary digital publishing institute (MDPI), 11(8), p.1-15/3301
| [HAL] / [BIB] / [DOI] |
2021 |
Damien Texier, Maxime Ecochard, Thomas Gheno, Daniel Monceau, Mehdi Salem, Philippe Lours. Screening for Al2O3 failure in MCrAlY APS coatings using short-term oxidation at high temperature
Corrosion Science, Elsevier, 184, p.1-15/109334
| [HAL] / [BIB] / [DOI] |
2021 |
Mathieu Boutin, Aline Rogeon, Maëlenn Aufray, Robert Piquet, Antoine Rouilly. Influence of flax fibers on network formation of DGEBA/DETA matrix
Composite Interfaces, VSP, 28(1), p.17-34
| [HAL] / [BIB] / [DOI] |
2021 |
Alexandra Lacombe, Yann Landon, Manuel Paredes, Damien Texier, Clément Chirol, Audrey Benaben. Investigations on the impact of the hole surface integrity on the fatigue life of a 2024‐T351 aluminum alloy drilled part
Fatigue and Fracture of Engineering Materials and Structures, Wiley-Blackwell, 44(6), p.1455-1468
| [HAL] / [BIB] / [DOI] |
2021 |
Alireza Dashti, Clément Keller, Benoît Vieille, Alain Guillet, Christophe Bouvet. Experimental and Finite Element Analysis of the Tensile Behavior of Architectured Cu-Al Composite Wires
Materials, MDPI, 14(21), p.6305
| [HAL] / [BIB] / [DOI] |
2021 |
Lorraine Aparecida Silva, Christine Espinosa, Eric Paroissien, Frédéric Lachaud, Lucas F.M. da Silva. Numerical simulations of adhesive spreading during bonding-induced squeeze
Journal of Adhesion, Taylor & Francis
| [HAL] / [BIB] / [DOI] |
2021 |
Laure Moretti, Philippe Olivier, Bruno Castanié, Gérard Bernhart. Experimental study and in-situ FBG monitoring of process-induced strains during autoclave co-curing, co-bonding and secondary bonding of composite laminates
Composites Part A: Applied Science and Manufacturing, Elsevier, 142
| [HAL] / [BIB] / [DOI] |
2021 |
Olivier de Almeida, Lisa Feuillerat, Vivien Nouri, Karim Choquet. Influence of composite preform fabrication on the integrity of poly‐aryl‐ether‐ketone matrices
Journal of Applied Polymer Science, Wiley, 138(30), p.1-15/50719
| [HAL] / [BIB] / [DOI] |
2021 |
Mathieu Terner, Jiwon Lee, Baptiste Ruggieri, Etienne Copin, Oxana Ostrovskaya, Claudio Badini, Philippe Lours, Hyun-Uk Hong. Thermal shock resistance of a NiCrAlY-coated alloy 625 system produced by laser powder bed fusion
Surface and Coatings Technology, Elsevier, 417, p.1-14/127217
| [HAL] / [BIB] / [DOI] |
2021 |
Xiaoyu Liang, Camille Robert, Anis Hor, Franck Morel. Numerical investigation of the surface and microstructure effects on the high cycle fatigue performance of additive manufactured stainless steel 316L
International Journal of Fatigue, Elsevier, 149, p.106273
| [HAL] / [BIB] / [DOI] |
2021 |
Mohamed-Amine Laribi, Sahbi Tamboura, Joseph Fitoussi, Mohammadali Shirinbayan, R. Tie Bi, Abbas Tcharkhtchi, Hachmi Ben Dali. Modeling of Short Fiber Reinforced Polymer Composites Subjected to Multi‐block Loading
Applied Composite Materials, Springer Verlag (Germany), 28(4), p.973-990
| [HAL] / [BIB] / [DOI] |
2021 |
M.A. Charpagne, J. Hestroffer, A.T. Polonsky, M.P. Echlin, Damien Texier, V. Valle, I.J. Beyerlein, T.M. Pollock, J.C. Stinville. Slip localization in Inconel 718: a three-dimensional and statistical perspective
Acta Materialia, Elsevier, 215, p.1-15/117037
| [HAL] / [BIB] / [DOI] |
2021 |
Charles Romain, Damien Texier, Clara Desgranges, Jonathan Cormier, Stéphane Knittel, Daniel Monceau, Denis Delagnes. Oxidation of Thin Nickel-Based Superalloy Specimens: Kinetics Study and Mechanical Integrity
Oxidation of Metals, Springer Verlag, 96(1-2), p.169 - 182
| [HAL] / [BIB] / [DOI] |
2021 |
Abderrahmane Abderrahmane, Mohamed Gaceb, Mohammed Cheikh, Sabine Le Roux. Wear Behavior and Microstructure of Thermally Sprayed NiCrBSiFeC and Composite NiCrBSiFeC-WC(Co) Coatings
Materials Science-Medziagotyra, 27(2), p.175-183
| [HAL] / [BIB] / [DOI] |
2021 |
Anna Carla Araujo, Yann Landon, Pierre Lagarrigue. Smart drilling for Aerospace Industry: state of art in research and education
Procedia CIRP, ELSEVIER, 99, p.387-391
| [HAL] / [BIB] / [DOI] |
2021 |
A. Yaich, A. El Hami. Numerical and experimental investigation on multiaxial fatigue damage estimation of Qualmark chamber test table structures under random vibrations
Mechanics Based Design of Structures and Machines, Taylor & Francis, p.1-22
| [HAL] / [BIB] / [DOI] |
2021 |
Solène Lhabitant, Florimont Badouaille, Djamel Remache, Guillaume Cohen, Alain Toufine. Repair & maintenance by Metal Additive Manufacturing process on Titanium alloy parts
IOP Conference Series: Materials Science and Engineering, IOP Publishing, 1024(1), p.012022
| [HAL] / [BIB] / [DOI] |
2021 |
Benjamin Javaudin, Rémi Gilblas, Thierry Sentenac, Yannick Le Maoult. Experimental validation of the diffusion function model for accuracy-enhanced thermoreflectometry
Quantitative InfraRed Thermography Journal, Taylor and Francis, 18(1), p.18-33
| [HAL] / [BIB] / [DOI] |
2021 |
Feuillerat Lisa, Olivier de Almeida, Fontanier Jean-Charles, Fabrice Schmidt. Effect of poly(ether ether ketone) degradation on commingled fabrics consolidation
Composites Part A: Applied Science and Manufacturing, Elsevier, 149, p.1-9/106482
| [HAL] / [BIB] / [DOI] |
2021 |
Margot Bonmatin, France Chabert, Gérard Bernhart, Toufik Djilali. Rheological and crystallization behaviors of low processing temperature poly(aryl ether ketone)
Journal of Applied Polymer Science, Wiley, 138(47), p.51402
| [HAL] / [BIB] / [DOI] |
2021 |
R. Guélou, Florent Eyma, Arthur Cantarel, Samuel Rivallant, Bruno Castanié. Crashworthiness of poplar wood veneer tubes
International Journal of Impact Engineering, Elsevier, 147, p.103738
| [HAL] / [BIB] / [DOI] |
2021 |
Wafaa El Masnaoui, Alain Daidié, Frederic Lachaud, Christian Paleczny. Semi-analytical model development for preliminary study of 3D woven Composite/Metallic flange bolted assemblies
Composite Structures, Elsevier, 255, p.112906
| [HAL] / [BIB] / [DOI] |
2021 |
Xavier Sourd, Redouane Zitoune, Akshay Hejjaji, Mehdi Salem, Anis Hor, Damien Lamouche. Plain water jet cleaning of titanium alloy after abrasive water jet milling: Surface contamination and quality analysis in the context of maintenance
Wear, Elsevier, 477, p.1-13/203833
| [HAL] / [BIB] / [DOI] |
2021 |
Fatma Naiiri, Allègue Lamis, Mehdi Salem, Redouane Zitoune, Zidi Mondher. Performance of lightweight mortar reinforced with doum palm fiber
Journal of Composite Materials, SAGE Publications, 55(12), p.1591-1607
| [HAL] / [BIB] / [DOI] |
2021 |
Florian Boutenel, Gilles Dusserre, Anne Aimable, Thierry Chartier, Thierry Cutard. Rheophysical study of dispersed alumina suspensions
Powder Technology, Elsevier, 393, p.630-638
| [HAL] / [BIB] / [DOI] |
2021 |
Gilles Dusserre, Anaïs Farrugia, Thierry Cutard. Enabling pseudo-ductility in geopolymer based glass-ceramics matrix composites by slurry dilution
Open Ceramics, Elsevier, 7, p.100156
| [HAL] / [BIB] / [DOI] |
2021 |
Ali Rouwane, Robin Bouclier, Jean-Charles Passieux, Jean-Noël Périé. Adjusting fictitious domain parameters for fairly priced image-based modeling: Application to the regularization of Digital Image Correlation
Computer Methods in Applied Mechanics and Engineering, Elsevier, 373, p.113507
| [HAL] / [BIB] / [DOI] |
2021 |
Jia-Hong Liu, N. Binot, Denis Delagnes, M. Jahazi. Influence of the cooling rate below Ms on the martensitic transformation in a low alloy medium-carbon steel
Journal of Materials Research and Technology, Elsevier, 12, p.234-242
| [HAL] / [BIB] / [DOI] |
2021 |
Joan Mas Colomer, Nathalie Bartoli, Thierry Lefebvre, Joaquim R.R.A. Martins, Joseph Morlier. Aeroelastic scaling of flying demonstrator: flutter matching
Mechanics & Industry, EDP Sciences, 22, p.42
| [HAL] / [BIB] / [DOI] |
2021 |
Linh Phuong Luong, Rébecca Bonnaire, Jean-Noël Périé, Quentin Sirvin, Luc Penazzi. Speckle pattern creation methods for two‐dimensional digital image correlation strain measurements applied to mechanical tensile tests up to 700°C
Strain, Wiley-Blackwell, 57(5), p.1-19/e12388
| [HAL] / [BIB] / [DOI] |
2021 |
Camille Bonnet, Thomas Pottier, Yann Landon. Development of a multi-scale and coupled cutting model for the drilling of Ti-6Al-4V
CIRP Journal of Manufacturing Science and Technology, Elsevier, 35, p.526-540
| [HAL] / [BIB] / [DOI] |
2021 |
O. Keita, Y. Camara, Jamel Bessrour, Vincent Velay, Farhad Rezai-Aria. Engine Oil- Crankshaft Interaction Fem Modelling of an Air-Cooled Diesel Engine under Dynamic Severe Functioning Conditions
Physical Science International Journal, SCIENCEDOMAIN International, 25(8), p.81-88
| [HAL] / [BIB] / [DOI] |
2021 |
Seyedmohammad Tabaie, Farhad Rezai-Aria, Bertrand C.D. Flipo, Jonathan Cormier, Mohammad Jahazi. Post-Weld Heat Treatment of Additively Manufactured Inconel 718 Welded to Forged Ni-Based Superalloy AD730 by Linear Friction Welding
Metallurgical and Materials Transactions A, Springer Verlag/ASM International, 52A, p.3475-3488
| [HAL] / [BIB] / [DOI] |
2020 |
Khaled Hallak, Fulbert Baudoin, Virginie Griseri, Florian Bugarin, Stéphane Segonds. Numerical Optimization Applying Trust Region Algorithm to Optimize Parameters Related to Charge Transport Model in LDPE
IEEE Transactions on Dielectrics and Electrical Insulation, Institute of Electrical and Electronics Engineers, 27(6), p.2048-2055
| [HAL] / [BIB] / [DOI] |
2020 |
Bessem Debich, Abdelkhalak El Hami, Ahmed Yaich, Wajih Gafsi, Lassaad Walha, Mohamed Haddar. Design optimization of PCM-based finned heat sinks for mechatronic components: A numerical investigation and parametric study
Journal of Energy Storage, Elsevier, 32, p.101960
| [HAL] / [BIB] / [DOI] |
2020 |
Michel Salaün, Martin Delavenne, Bernard Barriety, Fabio Vetrano, Valérie Ferrand. Assessment of the efficiency of an active winglet concept for a long-range aircraft
CEAS Aeronautical Journal, Springer, 11(4), p.971-990
| [HAL] / [BIB] / [DOI] |
2020 |
Bruno Castanié, Victor Achard, Clément Chirol. Effect of milled notches on the strength of open hole, filled holes, single and double lap shear CFRP tension coupons
Composite Structures, Elsevier, 254, p.112872
| [HAL] / [BIB] / [DOI] |
2020 |
Jean-Charles Maré. Practical Considerations in the Modelling and Simulation of Electromechanical Actuators
Actuators, MDPI, 9(4), p.94
| [HAL] / [BIB] / [DOI] |
2020 |
Philippe Marguerès, Philippe Olivier, Mahamadou Mounkaila, Sonia Sassi, Thierry Camps. Carbon fibres reinforced composites. Electrical impedance analysis: a gateway to smartness
International Journal of Smart and Nano Materials, Taylor & Francis, 11(4), p.417-430
| [HAL] / [BIB] / [DOI] |
2020 |
Chen Li, Arthur Cantarel, Xiaojing Gong. A study on resin infusion and effects of reinforcement structure at dual scales by a quasi-realistic numerical simulation method
Journal of Composite Materials, SAGE Publications, 54(27), p.4157-4171
| [HAL] / [BIB] / [DOI] |
2020 |
Vincent Torrelli, Eric Paroissien. Simplified stress analysis of multilayered bonded structure under 1D-bar kinematics
Composite Structures, Elsevier, 251, p.112641-112657
| [HAL] / [BIB] / [DOI] |
2020 |
G. Kinvi-Dossou, N. Bonfoh, R. Matadi Boumbimba, Frederic Lachaud, A. Nyoungue, P. Gerard, Yao Koutsawa. A mesoscale modelling approach of glass fibre/Elium acrylic woven laminates for low velocity impact simulation
Composite Structures, Elsevier, 252, p.112671
| [HAL] / [BIB] / [DOI] |
2020 |
Yuan Wu, Marianne Perrin, Marie-Laetitia Pastor, Pascal Casari, Xiaojing Gong. On the determination of acoustic emission wave propagation velocity in composite sandwich structures
Composite Structures, Elsevier, 259, p.113231
| [HAL] / [BIB] / [DOI] |
2020 |
Sabrina Otmani, Marco Marchitto, Bruno Watier, Guilhem Michon. Comparison of adults and children anthropometric tables: mass segment distribution
Computer Methods in Biomechanics and Biomedical Engineering, Taylor & Francis, 23(sup1), p.S209-S211
| [HAL] / [BIB] / [DOI] |
2020 |
Yiwei Wang, Jian Zhou, Lianyu Zheng, Christian Gogu. An end-to-end fault diagnostics method based on convolutional neural network for rotating machinery with multiple case studies
Journal of Intelligent Manufacturing, Springer Verlag (Germany)
| [HAL] / [BIB] / [DOI] |
2020 |
Placide Uwizeyimana, Marianne Perrin, Florent Eyma. Moisture monitoring in glulam timber structures with embedded resistive sensors: study of influence parameters
Wood Science and Technology, Springer Verlag, 54, p.1463 - 1478
| [HAL] / [BIB] / [DOI] |
2020 |
Thiago Birro, Eric Paroissien, Maëlenn Aufray, Frederic Lachaud. A methodology based on the coupled criterion for the assessment of adhesive-to-adherend interface crack initiation
International Journal of Adhesion and Adhesives, Elsevier, 102, p.102664-102676
| [HAL] / [BIB] / [DOI] |
2020 |
Adama Diourté, Florian Bugarin, Cyril Bordreuil, Stéphane Segonds. Continuous three-dimensional path planning (CTPP) for complex thin parts with wire arc additive manufacturing
Additive Manufacturing, Elsevier, p.101622
| [HAL] / [BIB] / [DOI] |
2020 |
Norazrina Mat Jali, Patrice Longère. Experimental investigation of the dynamic fracture of a class of RT-PMMAs under impact loading
International Journal of Fracture, Springer Verlag, p.219-237
| [HAL] / [BIB] / [DOI] |
2020 |
M. Awad, Daniel Attinger, Adrian Bejan, Ali Beskok, Gian Celata, Stéphane Colin, Vijay Dhir, Paolo Di Marco, Srinath Ekkad, Srinivas Garimella, Masahiro Kawaji, Michael King, Norbert Kockmann, Jon Kriegel, Sushanta Mitra, Saeed Moghaddam, Yuri Muzychka, Vinod Narayanan, Gherhardt Ribatski, S.A. Sherif, Masahiro Shoji, Peter Stephan, John Thome, Patricia Weisensee. Professor Satish G. Kandlikar on his 70th birthday
Journal of Thermal Science and Engineering Applications, American Society of Mechanical Engineers, 22, p.060301
| [HAL] / [BIB] / [DOI] |
2020 |
Bessem Debich, Abdelkhalak El Hami, Ahmed Yaich, Wajih Gafsi, Lassaad Walha, Mohamed Haddar. An efficient reliability-based design optimization study for PCM-based heat-sink used for cooling electronic devices
Mechanics of Advanced Materials and Structures, Taylor & Francis, p.1-13
| [HAL] / [BIB] / [DOI] |
2020 |
Juan Daniel Pujols Gonzalez, Christophe Bouvet, Thomas Breteau, Christophe Gautrelet, Benoît Vieille. Influence of impact velocity on impact behaviour of hybrid woven-fibers reinforced PEEK thermoplastic laminates
Composites Part C: Open Access, Elsevier, 2
| [HAL] / [BIB] / [DOI] |
2020 |
Thiago Luiz Lara Oliveira, Redouane Zitoune, Antônio Carlos Ancelotti Jr., Sebastião Simões Da Cunha Jr.. Smart machining: Monitoring of CFRP milling using AE and IR
Composite Structures, Elsevier, 249, p.112611
| [HAL] / [BIB] / [DOI] |
2020 |
Thiago A.M. Guimarães, Leonardo Sanches, Flávio D. Marques. Nonlinear supersonic post-flutter motion of panels with adjacent bays and thermal effects
International Journal of Non-Linear Mechanics, Elsevier, 125, p.103545-103558
| [HAL] / [BIB] / [DOI] |
2020 |
Christophe Bouvet, J. Serra, P. Garcia Perez. Strain rate effect of mode II interlaminar fracture toughness on the impact response of a thermoplastic PEEK composite
Composites Part C: Open Access, Elsevier, 2, p.100031
| [HAL] / [BIB] / [DOI] |
2020 |
Christophe Bouvet, Joël Serra, Pablo Garcia-Perez. Strain rate effect of mode II interlaminar fracture toughness on the impact response of a thermoplastic PEEK composite
Composites Part C: Open Access, Elsevier, 2
| [HAL] / [BIB] / [DOI] |
2020 |
Oussama Braydi, Christian Gogu, Manuel Paredes. Robustness and reliability investigations on a nonlinear energy sink device concept
Mechanics & Industry, EDP Sciences, 21
| [HAL] / [BIB] / [DOI] |
2020 |
Thibaut Hirschler, Robin Bouclier, A. Duval, T. Elguedj, Joseph Morlier. A New Lighting on Analytical Discrete Sensitivities in the Context of IsoGeometric Shape Optimization
Archives of Computational Methods in Engineering, Springer Verlag
| [HAL] / [BIB] / [DOI] |
2020 |
Daniel Măriuţa, Stéphane Colin, Christine Barrot-Lattes, Stéphane Le Calvé, Jan G Korvink, Lucien Baldas, Jürgen Brandner. Miniaturization of fluorescence sensing in optofluidic devices
Microfluidics and Nanofluidics, Springer Verlag, 24(9), p.65
| [HAL] / [BIB] / [DOI] |
2020 |
Miguel Reseco Bato, Anis Hor, Aurelien Rautureau, Christian Bes. Experimental and numerical methodology to obtain the probability of detection in eddy current NDT method
NDT & E International, Elsevier, 114, p.102300-1023013
| [HAL] / [BIB] / [DOI] |
2020 |
Sébastien Schwartz, Juan José Montero-Jiménez, Michel Salaün, Rob A. Vingerhoeds. A fault mode identification methodology based on self-organizing map
Neural Computing and Applications, Springer Verlag, 32(17), p.13405-13423
| [HAL] / [BIB] / [DOI] |
2020 |
Daljeet Singh, Rahul Upadhyay, Husanbir Singh Pannu, Dimitri Leray. Development of an adaptive neuro fuzzy inference system based vehicular traffic noise prediction model
Journal of Ambient Intelligence and Humanized Computing, Springer, 12(2), p.2685-2701
| [HAL] / [BIB] / [DOI] |
2020 |
Scott Delbecq, Marc Budinger, Aurélien Reysset. Benchmarking of monolithic MDO formulations and derivative computation techniques using OpenMDAO
Structural and Multidisciplinary Optimization, Springer Verlag (Germany), 62(2), p.645-666
| [HAL] / [BIB] / [DOI] |
2020 |
Marie Tirvaudey, Ludovic Chamoin, Robin Bouclier, Jean-Charles Passieux. A posteriori error estimation and adaptivity in non-intrusive couplings between concurrent models
Computer Methods in Applied Mechanics and Engineering, Elsevier, 367, p.113104
| [HAL] / [BIB] / [DOI] |
2020 |
Bruno Castanié, Christophe Bouvet, Malo Ginot. Review of composite sandwich structure in aeronautic applications
Composites Part C: Open Access, Elsevier, 1
| [HAL] / [BIB] / [DOI] |
2020 |
Scott Delbecq, Marc Budinger, Aitor Ochotorena, Aurélien Reysset, François Defaÿ. Efficient sizing and optimization of multirotor drones based on scaling laws and similarity models
Aerospace Science and Technology, Elsevier, 102, p.1-23
| [HAL] / [BIB] / [DOI] |
2020 |
Daniel Mariuta, Arumugam Govindaraji, Stéphane Colin, Christine Barrot, Stéphane Le Calvé, Jan Korvink, Lucien Baldas, Jürgen Brandner. Optofluidic formaldehyde sensing: towards on-chip integration
Micromachines, MDPI, 11(7), p.673
| [HAL] / [BIB] / [DOI] |
2020 |
Matteo Filippi, Enrico Zappino, Erasmo Carrera, Bruno Castanié. Effective Static and Dynamic Finite Element Modeling of a Double Swept Composite Rotor Blade
Journal of the American Helicopter Society, 65(3), p.1-12
| [HAL] / [BIB] / [DOI] |
2020 |
Xiaoyu Liang, Camille Robert, Anis Hor, Franck Morel. A numerical investigation of the high cycle fatigue sensitivity to microstructure and defect
International Journal of Fatigue, Elsevier, 136, p.105541-105556
| [HAL] / [BIB] / [DOI] |
2020 |
Juan José Montero Jimenez, Sébastien Schwartz, Rob A. Vingerhoeds, Bernard Grabot, Michel Salaün. Towards multi-model approaches to predictive maintenance: A systematic literature survey on diagnostics and prognostics
Journal of Manufacturing Systems, Elsevier, 56, p.539-557
| [HAL] / [BIB] / [DOI] |
2020 |
Guillermo López Quesada, Giorgos Tatsios, Dimitris Valougeorgis, Marcos Rojas-Cárdenas, Lucien Baldas, Christine Barrot, Stéphane Colin. Thermally driven pumps and diodes in multistage assemblies consisting of microchannels with converging, diverging and uniform rectangular cross sections
Microfluidics and Nanofluidics, Springer Verlag, 24(7), p.54
| [HAL] / [BIB] / [DOI] |
2020 |
Anthea Comellini, Davide Casu, Emmanueil Zenou, Vincent Dubanchet, Christine Espinosa. Incorporating delayed and multi-rate measurements in navigation filter for autonomous space rendezvous
Journal of Guidance Control and Dynamics, 43(6), p.1164-1188
| [HAL] / [BIB] / [DOI] |
2020 |
Francis Collombet, Mauricio Torres, Bernard Douchin, Laurent Crouzeix, Yves-Henri Grunevald, Jérôme Lubin, Thierry Camps, Xavier Jacob, Geert Luyckx, K.-T Wu. Multi-instrumentation monitoring for the curing process of a composite structure
Measurement - Journal of the International Measurement Confederation (IMEKO), Elsevier, 157, p.107635
| [HAL] / [BIB] / [DOI] |
2020 |
Miguel Ruiz de Sotto, Patrice Longère, Véronique Doquet, Jessica Papasidero. A constitutive model for a rate and temperature-dependent, plastically anisotropic titanium alloy
International Journal of Plasticity, Elsevier, p.102777
| [HAL] / [BIB] / [DOI] |
2020 |
Norazrina Binti Mat Jali, Patrice Longère. Fracture Behavior of RT-PMMA Under Impact Loading
International Journal of Integrated Engineering, 12(05), p.104-107
| [HAL] / [BIB] / [DOI] |
2020 |
Agathe Jaillon, Julien Jumel, Frederic Lachaud, Eric Paroissien. Mode I cohesive zone model parameters identification and comparison of measurement techniques based on uncertainty estimation
International Journal of Solids and Structures, Elsevier, 191-192, p.577-587
| [HAL] / [BIB] / [DOI] |
2020 |
Guillaume Colantonio, Morgane Chapelier, Robin Bouclier, Jean-Charles Passieux, Eduard Marenić. Non-invasive multilevel geometric regularization of mesh-based 3D shape measurement
International Journal for Numerical Methods in Engineering, Wiley, 121(9), p.1877-1897
| [HAL] / [BIB] / [DOI] |
2020 |
N Nguyen-Dinh, Christophe Bouvet, Redouane Zitoune. Influence of machining damage generated during trimming of CFRP composite on the compressive strength
Journal of Composite Materials, SAGE Publications, 54(11)
| [HAL] / [BIB] / [DOI] |
2020 |
Jian Zhou, Lian-Yu Zheng, Yiwei Wang, Christian Gogu. A Multistage Deep Transfer Learning Method for Machinery Fault Diagnostics Across Diverse Working Conditions and Devices
IEEE Access, IEEE, 8, p.80879-80898
| [HAL] / [BIB] / [DOI] |
2020 |
Benoît Montagne, Frederic Lachaud, Eric Paroissien, Dominique Martini, Fabrice Congourdeau. Failure analysis of single lap composite laminate bolted joints: comparison of experimental and numerical tests
Composite Structures, Elsevier, 238, p.1-13
| [HAL] / [BIB] / [DOI] |
2020 |
César Moisés Sánchez Camargo, Anis Hor, Catherine Mabru. A robust inverse analysis method for elastoplastic behavior identification using the true geometry modeling of Berkovich indenter
International Journal of Mechanical Sciences, Elsevier, 171, p.105370
| [HAL] / [BIB] / [DOI] |
2020 |
Irene Lara-Ibeas, Cristina Megias-Sayago, Alberto Rodríguez-Cuevas, Rubén Ocampo-Torres, Benoît Louis, Stéphane Colin, Stéphane Le Calvé. Adsorbent screening for airborne BTEX analysis and removal
Journal of Environmental Chemical Engineering, Elsevier, 8(2), p.103563
| [HAL] / [BIB] / [DOI] |
2020 |
Frederic Lachaud, Eric Paroissien, Laurent Michel. Validation of a simplified analysis for the simulation of delamination of CFRP composite laminated materials under pure mode I
Composite Structures, Elsevier, 237, p.1-19
| [HAL] / [BIB] / [DOI] |
2020 |
Marion Broutelle, Frederic Lachaud, Ludovic Barriere, Alain Daidié, Alexandre Chardonneau, Florent Bouillon. Bearing damage identification in oxide/oxide ceramic matrix composite with a new test design
Composite Structures, Elsevier, 236, p.111902 1-17
| [HAL] / [BIB] / [DOI] |
2020 |
Alexis Marbœuf, Lokman Bennani, Marc Budinger, Valérie Pommier-Budinger. Electromechanical resonant ice protection systems: numerical investigation through a phase-field mixed adhesive/brittle fracture model
Engineering Fracture Mechanics, Elsevier, 230(106926), p.1-23
| [HAL] / [BIB] / [DOI] |
2020 |
Pierre-Jean Barjhoux, Youssef Diouane, Stéphane Grihon, Dimitri Bettebghor, Joseph Morlier. A bi-level methodology for solving large-scale mixed categorical structural optimization
Structural and Multidisciplinary Optimization, Springer Verlag (Germany), 62, p.337-351
| [HAL] / [BIB] / [DOI] |
2020 |
Benjamin Ordonneau, Eric Paroissien, Michel Salaün, Julien Malrieu, Alexandre Guigue, Sébastien Schwartz. A methodology for the computation of the macro-element stiffness matrix for the stress analysis of a lap joint with functionally graded adhesive properties
International Journal of Adhesion and Adhesives, Elsevier, 97
| [HAL] / [BIB] / [DOI] |
2020 |
Konstantinos Nikolakopoulos, Jean-Philippe Crété, Patrice Longère. Volume averaging based integration method in the context of XFEM-cohesive zone model coupling
Mechanics Research Communications, Elsevier, 104, p.103485
| [HAL] / [BIB] / [DOI] |
2020 |
Kübra Sekmen, Eric Paroissien, Frederic Lachaud. Simplified stress analysis of multilayered adhesively bonded structures
International Journal of Adhesion and Adhesives, Elsevier, 97
| [HAL] / [BIB] / [DOI] |
2020 |
Marc Budinger, Aurélien Reysset, Aitor Ochotorena, Scott Delbecq. Scaling laws and similarity models for the preliminary design of multirotor drones
Aerospace Science and Technology, Elsevier, 98, p.1-15
| [HAL] / [BIB] / [DOI] |
2020 |
Nawel Glaa, Kamel Mehdi, Kamel Moussaoui, Redouane Zitoune. Numerical and experimental study of the drilling of multi-stacks made of titanium alloy Ti-6Al-4V: interface and burr behavior
International Journal of Advanced Manufacturing Technology, Springer Verlag, 107(3-4), p.1153-1162
| [HAL] / [BIB] / [DOI] |
2020 |
Jean-Noël Périé, Jean-Charles Passieux. Special Issue on Advances in Digital Image Correlation (DIC)
Applied Sciences, Multidisciplinary digital publishing institute (MDPI), 10(4), p.1530
| [HAL] / [BIB] / [DOI] |
2020 |
Juan de Dios Rodríguez Ramírez, Bruno Castanié, Christophe Bouvet. Insert of sandwich panels sizing through a failure mode map
Composite Structures, Elsevier, 234
| [HAL] / [BIB] / [DOI] |
2020 |
Pierre Rahmé, P. Moussa, Frédéric Lachaud, Yann Landon. Effect of adding a woven glass ply at the exit of the hole of CFRP laminates on delamination during drilling
Composites Part A: Applied Science and Manufacturing, Elsevier, 129, p.105731
| [HAL] / [BIB] / [DOI] |
2020 |
Fadhel Chatti, Christophe Bouvet, Guilhem Michon, Dominique Poquillon. Numerical analysis of shear stiffness of an entangled cross-linked fibrous material
International Journal of Solids and Structures, Elsevier, 184, p.221-232
| [HAL] / [BIB] / [DOI] |
2020 |
Marie Tirvaudey, Robin Bouclier, Jean-Charles Passieux, Ludovic Chamoin. Non-invasive implementation of nonlinear isogeometric analysis in an industrial FE software
Engineering Computations, Emerald, 37(1), p.237-261
| [HAL] / [BIB] / [DOI] |
2020 |
Gilles Dusserre, Anaïs Farrugia, Thierry Cutard. Rheology evolution of a geopolymer precursor aqueous suspension during aging
International Journal of Applied Ceramic Technology, Wiley, 17(4), p.1802-1810
| [HAL] / [BIB] / [DOI] |
2020 |
Xavier Sourd, Redouane Zitoune, Akshay Hejjaji, Mehdi Salem, Laurent Crouzeix, D. Lamouche. Multi-scale analysis of the generated damage when machining pockets of 3D woven composite for repair applications using abrasive water jet process: Contamination analysis
Composites Part A: Applied Science and Manufacturing, Elsevier, 139, p.1-11/106118
| [HAL] / [BIB] / [DOI] |
2020 |
Sylvain Dubreuil, Nathalie Bartoli, Christian Gogu, Thierry Lefebvre. Towards an Efficient Global Multidisciplinary Design Optimization algorithm
Structural and Multidisciplinary Optimization, Springer Verlag (Germany)
| [HAL] / [BIB] / [DOI] |
2020 |
Lucien Baldas, Jürgen J Brandner, Gian Luca Morini. Editorial for the Special Issue "Selected Papers from the ISTEGIM'19-Thermal Effects in Gas Flow in Microscale
Micromachines, MDPI, 11(9), p.879
| [HAL] / [BIB] / [DOI] |
2020 |
Dominique Fratantonio, Marcos Rojas-Cárdenas, Christine Barrot, Lucien Baldas, Stéphane Colin. Velocity measurements in channel gas flows in the slip regime by means of molecular tagging velocimetry
Micromachines, MDPI, 11(4), p.374
| [HAL] / [BIB] / [DOI] |
2020 |
Simon Vandevelde, Alain Daidié, Marc Sartor. Use of 1D mechanical and thermal models to predetermine the heat transferable by a thermal interface material layer in space applications
Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science, SAGE Publications, p.095440622091550/1-15
| [HAL] / [BIB] / [DOI] |
2020 |
Antoine Trellu, Christophe Bouvet, Samuel Rivallant, Léon Ratsifandrihana. A new interface element connecting 3D finite elements with non-coincident nodes to simulate delamination in composite laminates
Composite Structures, Elsevier, 252, p.112694
| [HAL] / [BIB] / [DOI] |
2020 |
Saber Chelaghma, Olivier de Almeida, Philippe Marguerès, Jean-Charles Passieux, Jean-Noël Périé, Alain Vinet, Bénédicte Reine. Identification of Isothermal crystallization kinetics of poly(ether-ketone-ketone) based on spherulite growth measurements and enthalpic data
Polymer Crystallization, Wiley, 3(4), p.e10141
| [HAL] / [BIB] / [DOI] |
2020 |
Laurie Despax, Vanessa Vidal, Denis Delagnes, Moukrane Dehmas, Hiroaki Matsumoto, Vincent Velay. Influence of strain rate and temperature on the deformation mechanisms of a fine-grained Ti-6Al-4V alloy
Materials Science and Engineering: A, Elsevier, 790, p.1-14/139718
| [HAL] / [BIB] / [DOI] |
2020 |
Mahfoud Herraz, Jean-Max Redonnet, Marcel Mongeau, Mohammed Sbihi. A new method for choosing between ball-end cutter and toroidal cutter when machining free-form surfaces
International Journal of Advanced Manufacturing Technology, Springer Verlag, 111(5-6), p.1425-1443
| [HAL] / [BIB] / [DOI] |
2020 |
Damien Texier, Clément Cadet, Thomas Straub, Chris Eberl, Vincent Maurel. Tensile Behavior of Air Plasma Spray MCrAlY Coatings: Role of High Temperature Agings and Process Defects
Metallurgical and Materials Transactions A, Springer Verlag/ASM International, 51, p.2766–2777
| [HAL] / [BIB] / [DOI] |
2020 |
Ye Pyae Sone Oo, Hervé Le Sourne, Olivier Dorival. On the applicability of Taylor’s theory to the underwater blast response of composite plates
International Journal of Impact Engineering, Elsevier, 145, p.103677
| [HAL] / [BIB] / [DOI] |
2020 |
Mehdi Salem, Sabine Le Roux, Anis Hor, Gilles Dour. A new insight on the analysis of residual stresses related distortions in selective laser melting of Ti-6Al-4 V using the improved bridge curvature method
Additive Manufacturing, Elsevier, 36, p.1-16/101586
| [HAL] / [BIB] / [DOI] |
2020 |
I. Tabiai, Damien Texier, P. Bocher, D. Therriault, M. Levesque. In-situ Full Field Out of Plane Displacement and Strain Measurements at the Micro-Scale in Single Reinforcement Composites under Transverse Load
Experimental Mechanics, Society for Experimental Mechanics, 60, p.359-377
| [HAL] / [BIB] / [DOI] |
2020 |
Amani Mahdi, Yosra Turki, Malek Habak, Mehdi Salem, Zoubeir Bouaziz. Experimental study of thrust force and surface quality when drilling hybrid stacks
International Journal of Advanced Manufacturing Technology, Springer Verlag, 107, p.3981–3994
| [HAL] / [BIB] / [DOI] |
2020 |
Florian Boutenel, Gilles Dusserre, Thierry Cutard. Strength Loss of Basalt-Based Mineral Fibers after Thermal Desizing
Revue des composites et des matériaux avancés = Journal of Composite and Advanced Materials, IIETA, 30(3-4), p.115-122
| [HAL] / [BIB] / [DOI] |
2020 |
Yousef Saadati, Gilbert Lebrun, Christophe Bouvet, Jean-François Chatelain, Yves Beauchamp. Study of translaminar fracture toughness of unidirectional flax/epoxy composite
Composites Part C: Open Access, Elsevier, 1, p.100008
| [HAL] / [BIB] / [DOI] |
2020 |
N. Nguyen-Dinh, Akshay Hejjaji, Redouane Zitoune, Christophe Bouvet, Mehdi Salem. New tool for reduction of harmful particulate dispersion and to improve machining quality when trimming carbon/epoxy composites
Composites Part A: Applied Science and Manufacturing, Elsevier, 131, p.105806
| [HAL] / [BIB] / [DOI] |
2020 |
Jiwon Lee, Mathieu Terner, Sunyoung Jun, Hyun-Uk Hong, Etienne Copin, Philippe Lours. Heat treatments design for superior high-temperature tensile properties of alloy 625 produced by Selective Laser Melting
Materials Science and Engineering: A, Elsevier, 790, p.1-15/139720
| [HAL] / [BIB] / [DOI] |
2020 |
Vivien Nouri, Marigilson Pontes de Siqueira Moura, Bruno Payré, Olivier de Almeida, Christophe Dejugnat, Sophie Franceschi-Messant, Emile Perez. How an organogelator can gelate water: gelation transfer from oil to water induced by a nanoemulsion
Soft Matter, Royal Society of Chemistry, p.2371-2378
| [HAL] / [BIB] / [DOI] |
2020 |
Daniel Mariuta, Lucien Baldas, Stéphane Colin, Stéphane Le Calvé, Jan Gerrit Gerrit Korvink, Juergen J. Brandner. Prototyping a miniaturized microfluidic sensor for real-time detection of airborne formaldehyde
International Journal of Chemical Engineering and Applications, International Journal of Chemical Engineering and Applications, 11(1), p.23-28
| [HAL] / [BIB] / [DOI] |
2020 |
Antoine Trellu, Guillaume Pichon, Christophe Bouvet, Samuel Rivallant, Bruno Castanié, Joël Serra, Léon Ratsifandrihana. Combined loadings after medium velocity impact on large CFRP laminate plates: Tests and enhanced computation/testing dialogue
Composites Science and Technology, Elsevier, 196, p.108194
| [HAL] / [BIB] / [DOI] |
2020 |
Yankuan Liu, Etienne Copin, Sandrine Duluard, Thierry Sentenac, Zhiping P. Wang, Florence Ansart, Philippe Lours. Apparent Interfacial Toughness of Undoped and Photoluminescent Eu3+-Doped Yttria-Stabilized Zirconia Thermal Barrier Coatings
Journal of Thermal Spray Technology, ASM International/Springer, 29, p.433-443
| [HAL] / [BIB] / [DOI] |
2020 |
Fatna Benmessaoud, Mohammed Cheikh, Vincent Velay, Vanessa Vidal, Hiroaki Matsumoto. Role of grain size and crystallographic texture on tensile behavior induced by sliding mechanism in Ti-6Al-4V alloy
Materials Science and Engineering: A, Elsevier, 774, p.138835
| [HAL] / [BIB] / [DOI] |
2020 |
N. Vanderesse, Damien Texier, P. Bocher. Effect of porosities on brazed martensitic steel tensile properties: 2D and 3D pre-mortem vs post-mortem characterizations
Materials Characterization, Elsevier, 160, p.110084
| [HAL] / [BIB] / [DOI] |
2020 |
Marwa Abida, Ahmad Baklouti, Florian Gehring, Alexandre Vivet, Christophe Bouvet. Inverse approach for flax yarns mechanical properties identification from statistical mechanical characterization of the fabric
Mechanics of Materials, Elsevier, 151, p.103638
| [HAL] / [BIB] / [DOI] |
2020 |
J.-C. Stinville, M.A. Charpagne, F. Bourdin, P.G. Callahan, Z. Chen, M.P. Echlin, Damien Texier, J. Cormier, P. Villechaise, T.M. Pollock, Valery Valle. Measurement of Elastic and Rotation Fields during Irreversible Deformation using Heaviside-Digital Image Correlation
Materials Characterization, Elsevier, 169, p.1-16/110600
| [HAL] / [BIB] / [DOI] |
2020 |
Anne Aimable, A Delomenie, Manuella Cerbelaud, Arnaud Videcoq, T. Chartier, Florian Boutenel, Thierry Cutard, Gilles Dusserre. An experimental and simulation study of heteroaggregation in a binary mixture of alumina and silica colloids
Colloids and Surfaces A: Physicochemical and Engineering Aspects, Elsevier, 605, p.1-10/125350
| [HAL] / [BIB] / [DOI] |
2020 |
Damien Texier, Etienne Copin, Augustin Flores, Jiwon Lee, Mathieu Terner, Hyun-Uk Hong, Philippe Lours. High temperature oxidation of NiCrAlY coated Alloy 625 manufactured by selective laser melting
Surface and Coatings Technology, Elsevier, 398, p.1-14/126041
| [HAL] / [BIB] / [DOI] |
2020 |
Mathieu Terner, Jiwon Lee, Giulio Marchese, Sara Biamino, Hyun-Uk Hong. Electron Backscattered Diffraction to Estimate Residual Stress Levels of a Superalloy Produced by Laser Powder Bed Fusion and Subsequent Heat Treatments
Materials, MDPI, 13(20), p.4643
| [HAL] / [BIB] / [DOI] |
2020 |
Xavier Sourd, Redouane Zitoune, Laurent Crouzeix, Mehdi Salem, M. Charlas. New model for the prediction of the machining depth during milling of 3D woven composite using abrasive waterjet process
Composite Structures, Elsevier, 234, p.1-12/111760
| [HAL] / [BIB] / [DOI] |
2020 |
Gabriele Capasso, Joseph Morlier, Miguel Charlotte, Simone Coniglio. Stress-based topology optimization of compliant mechanisms using nonlinear mechanics
Mechanics & Industry, EDP Sciences, 21(3), p.1-17
| [HAL] / [BIB] / [DOI] |
2020 |
Sébastien Schwartz, Eric Paroissien, Frederic Lachaud. General formulation of macro-elements for the simulation of multi-layered bonded structures
Journal of Adhesion, Taylor & Francis, 96(6), p.602-632
| [HAL] / [BIB] / [DOI] |
2020 |
Cesar-Moises Sanchez-Camargo, Anis Hor, Mehdi Salem, Catherine Mabru. A robust method for mechanical characterization of heterogeneous materials by nanoindentation grid analysis
Materials & Design, Elsevier, 194, p.1-16/108908
| [HAL] / [BIB] / [DOI] |
2020 |
Sahbi Tamboura, Houssem Ayari, Mohammadali Shirinbayan, M.A. Laribi, Hachmi Bendaly, Habib Sidhom, Abbas Tcharkhtchi, Joseph Fitoussi. Experimental and numerical multi-scale approach for Sheet-Molding-Compound composites fatigue prediction based on fiber-matrix interface cyclic damage
International Journal of Fatigue, Elsevier, 135, p.1-10
| [HAL] / [BIB] / [DOI] |
2020 |
Jean-Emmanuel Chambe, Christophe Bouvet, Olivier Dorival, Samuel Rivallant, Jean-François Ferrero. Effects of dynamics and trigger on energy absorption of composite tubes during axial crushing
International Journal of Crashworthiness, Taylor & Francis
| [HAL] / [BIB] / [DOI] |
2020 |
Damien Texier, Daniel Monceau, Serge Selezneff, Arnaud Longuet, Éric Andrieu. High Temperature Micromechanical Behavior of a Pt-Modified Nickel Aluminide Bond-Coating and of Its Interdiffusion Zone with the Superalloy Substrate
Metallurgical and Materials Transactions A, Springer Verlag/ASM International, 51, p.1475-1480
| [HAL] / [BIB] / [DOI] |
2020 |
Juan de Dios Rodriguez-Ramirez, Bruno Castanié, Christophe Bouvet. Damage Mechanics Modelling of the shear nonlinear behavior of Nomex honeycomb core. Application to sandwich beams
Mechanics of Advanced Materials and Structures, Taylor & Francis, 27(1)
| [HAL] / [BIB] / [DOI] |
2020 |
Agathe Jaillon, Julien Jumel, Frederic Lachaud, Eric Paroissien. Mode I cohesive zone model parameters identification and comparison of measurement techniques for robustness to the law shape evaluation
Journal of Adhesion, Taylor & Francis, 96(1-4), p.272-299
| [HAL] / [BIB] / [DOI] |
2020 |
Zeeshan Anjum, Masood Shah, Hassan Elahi, Mushtaq Khan, Mohammad Mujahid, Shahab Khushnood, Faisal Qayyum. Fretting fatigue crack initiation and propagation in Ti6Al4V sheets under tribocorrosive conditions of artificial seawater and physiological solutions
Proceedings of the Institution of Mechanical Engineers, Part L: Journal of Materials: Design and Applications, SAGE Publications, 234(12), p.1526-1534
| [HAL] / [BIB] / [DOI] |
2020 |
Sonia Braiek, Ated Ben Khalifa, Redouane Zitoune, Mondher Zidi, Mehdi Salem. Fire behaviour of hybrid filament-wound single and adhesively bonded composites tubes under static pressure
Polymer Testing, Elsevier, 91, p.106815
| [HAL] / [BIB] / [DOI] |
2020 |
M.A. Charpagne, J.C. Stinville, P.G. Callahan, Damien Texier, Z. Chen, P. Villechaise, Valery Valle, T.M. Pollock. Automated and quantitative analysis of plastic strain localization via multi-modal data recombination
Materials Characterization, Elsevier, 163, p.1-16/110245
| [HAL] / [BIB] / [DOI] |
2020 |
M.S. Dargusch, Anwar Hamasaiid, Gilles Dour, N Balasubramani, D. h. Stjohn. The Influence of In-Cavity Pressure on Heat Transfer and Porosity Formation During High-Pressure Die Casting of A380 Alloy
JOM Journal of the Minerals, Metals and Materials Society, Springer Verlag (Germany), 72, p.3798–3805
| [HAL] / [BIB] / [DOI] |
2020 |
Seyedmohammad Tabaie, Farhad Rezai-Aria, Mohammad Jahazi. Microstructure Evolution of Selective Laser Melted Inconel 718: Influence of High Heating Rates
Metals, MDPI, 10(5), p.1-21/587
| [HAL] / [BIB] / [DOI] |
2020 |
Longqiu Song, Anzu Ii, Laurie Despax, Hatsumi Onishi, Hiroaki Matsumoto, Vincent Velay, Vanessa Vidal. Experimental Analysis and Behaviour Modelling of the Deformation Mechanisms of a Ti-6242S Alloy under Hot and Superplastic Forming Conditions
Metals, MDPI, 10(12), p.1-17/1599
| [HAL] / [BIB] / [DOI] |
2020 |
Marie-Laetitia Pastor, Christophe Pescay, Christian Garnier. Comparison of two Nondestructive Tests in Carbon/Epoxy Composites
Journal of Materials Science and Engineering, David Publishing, 4
| [HAL] / [BIB] |
2020 |
Mohamed Amine Laribi, R. Tiebi, S. Tamboura, M. Shirinbayan, Abbas Tcharkhtchi, Joseph Fitoussi. Sheet Molding Compound Automotive Component Reliability Using a Micromechanical Damage Approach
Applied Composite Materials, Springer Verlag (Germany), 27, p.693-715
| [HAL] / [BIB] / [DOI] |
2020 |
Laure Moretti, Bruno Castanié, Gérard Bernhart, Philippe Olivier. Characterization and modelling of cure-dependent properties and strains during composites manufacturing
Journal of Composite Materials, SAGE Publications, 54(22), p.3109-3124
| [HAL] / [BIB] / [DOI] |
2020 |
Jiwon Lee, Mathieu Terner, Etienne Copin, Philippe Lours, Hyun-Uk Hong. A novel approach to the production of NiCrAlY bond coat onto IN625 superalloy by selective laser melting
Additive Manufacturing, Elsevier, 31, p.1-8/100998
| [HAL] / [BIB] / [DOI] |
2020 |
Mahmoud Harzallah, Thomas Pottier, Rémi Gilblas, Yann Landon, Michel Mousseigne, Johanna Senatore. Thermomechanical coupling investigation in Ti-6Al-4V orthogonal cutting: experimental and numerical confrontation
International Journal of Mechanical Sciences, Elsevier, 169, p.105322
| [HAL] / [BIB] / [DOI] |
2020 |
Malek Benaïssa, Catherine Mabru, Michel Chaussumier. Fatigue behavior of 2618-T851 aluminum alloy under uniaxial and multiaxial loadings
International Journal of Fatigue, Elsevier, 131(105322), p.1-9
| [HAL] / [BIB] / [DOI] |
2020 |
M.A. Laribi, Sahbi Tamboura, Joseph Fitoussi, Mohammadali Shirinbayan, R.Tie Bi, Abbas Tcharkhtchi, H. Ben Dali. Microstructure dependent fatigue life prediction for short fibers reinforced composites: Application to sheet molding compounds
International Journal of Fatigue, Elsevier, 138, p.105731
| [HAL] / [BIB] / [DOI] |
2020 |
Zia Ullah Arif, Masood Shah, Ehtsham Ur Rehman, Ali Tariq. Effect of spraying parameters on surface roughness, deposition efficiency, and microstructure of electric arc sprayed brass coating
International journal of advanced and applied sciences, Taipei Institute of Advanced Science Extension, 7(7), p.25 - 39
| [HAL] / [BIB] / [DOI] |
2020 |
Juan de Dios Rodríguez-Ramírez, Bruno Castanié, Christophe Bouvet. On the potting failure of inserts for sandwich panels: Review of defects and experimental analysis
Mechanics of Advanced Materials and Structures, Taylor & Francis, p.1-19
| [HAL] / [BIB] / [DOI] |
2020 |
Hamdi Ben Abdallah, Jean-José Orteu, Igor Jovančević, Benoît Dolives. Three-dimensional point cloud analysis for automatic inspection of complex aeronautical mechanical assemblies
Journal of Electronic Imaging, SPIE and IS&T, 29(04), p.041012-1-041012-22
| [HAL] / [BIB] / [DOI] |
2020 |
Ivan Mikhailov, Igor Jovančević, Nour Islam Mokhtari, Jean-José Orteu. Classification using a three-dimensional sensor in a structured industrial environment
Journal of Electronic Imaging, SPIE and IS&T, 29(04), p.041008
| [HAL] / [BIB] / [DOI] |
2020 |
Jia Huang, Christian Garnier, Marie-Laetitia Pastor, Xiaojing Gong. Investigation of self-heating and life prediction in CFRP laminates under cyclic shear loading condition based on the infrared thermographic data
Engineering Fracture Mechanics, Elsevier
| [HAL] / [BIB] |
2019 |
T. Hirschler, Robin Bouclier, D. Dureisseix, A. Duval, T. Elguedj, Joseph Morlier. A dual domain decomposition algorithm for the analysis of non-conforming isogeometric Kirchhoff–Love shells
Computer Methods in Applied Mechanics and Engineering, Elsevier, 357, p.112578
| [HAL] / [BIB] / [DOI] |
2019 |
M. Giselle Fernandez-Godino, Sylvain Dubreuil, Nathalie Bartoli, Christian Gogu, Sivaramakrishnan Balachandar, Raphael T. Haftka. Linear regression-based multifidelity surrogate for disturbance amplification in multiphase explosion
Structural and Multidisciplinary Optimization, Springer Verlag (Germany), p.1-16
| [HAL] / [BIB] / [DOI] |
2019 |
Claudia Fernandez-Escudero, Miguel Gagnon, Eric Laurendeau, Sebastien Prothin, Guilhem Michon, Annie Ross. Comparison of low, medium and high fidelity numerical methods for unsteady aerodynamics and nonlinear aeroelasticity
Journal of Fluids and Structures, Elsevier, 91, p.102744
| [HAL] / [BIB] / [DOI] |
2019 |
Sinh-Khoa Nguyen, Pierre-Louis Chiambaretto, Miguel Charlotte, Guilhem Michon, Joseph Morlier, Yves Gourinat. Experimental testing of pre-stressed granular assemblies as a surrogate material for the dynamic analysis of launcher cryogenic tanks
Engineering Structures, Elsevier, 197, p.1-14
| [HAL] / [BIB] / [DOI] |
2019 |
Pierre Journoud, Christophe Bouvet, Bruno Castanié, Frédéric Laurin, Léon Ratsifandrihana. Experimental and numerical analysis of unfolding failure of L-shaped CFRP specimens
Composite Structures, Elsevier, 232, 111563, p. 1-13
| [HAL] / [BIB] / [DOI] |
2019 |
Abderrahmane Djabali, Lotfi Toubal, Redouane Zitoune, Said Rechak. Fatigue damage evolution in thick composite laminates: Combination of X-ray tomography, acoustic emission and digital image correlation
Composites Science and Technology, Elsevier, 183, p.107815
| [HAL] / [BIB] / [DOI] |
2019 |
I. Tawk, J. Rishmany, J. Saba, Pablo Navarro, Jean-François Ferrero. Experimental study of the interlaminar fracture of composite materials in mode III by MSCB test
Composite Structures, Elsevier, p.111548
| [HAL] / [BIB] / [DOI] |
2019 |
J.E. Chambe, Christophe Bouvet, Olivier Dorival, Jean-François Ferrero. Energy absorption capacity of composite thin-wall circular tubes under axial crushing with different trigger initiations
Journal of Composite Materials, SAGE Publications, p.002199831987722
| [HAL] / [BIB] / [DOI] |
2019 |
Eric Paroissien, Frederic Lachaud. On the potential static strength of hybrid (bolted/bonded) lap joints with functionally graded adhesives
AIAA Journal, American Institute of Aeronautics and Astronautics, 59(7), p.4093-4103
| [HAL] / [BIB] / [DOI] |
2019 |
K.R. Ramakrishnan, Nicolas Le Moigne, Olivier de Almeida, Arnaud Regazzi, S. Corn. Optimized manufacturing of thermoplastic biocomposites by fast induction-heated compression moulding: influence of processing parameters on microstructure development and mechanical behaviour
Composites Part A: Applied Science and Manufacturing, Elsevier, 124, p.105493
| [HAL] / [BIB] / [DOI] |
2019 |
Najib Souissi, Catherine Mabru, Chedly Bradai. Aging response investigation of 2017 Al alloy processed by gravity and squeeze casting
International Journal of Materials Research, Carl Hanser Verlag GmbH & Co, 110(9), p.859-864
| [HAL] / [BIB] / [DOI] |
2019 |
S. Prabhakaran, V. Krishnaraj, K. Shankar, M Senthilkumar, Redouane Zitoune. Experimental investigation on impact, sound, and vibration response of natural-based composite sandwich made of flax and agglomerated cork
Journal of Composite Materials, SAGE Publications, p.002199831987135
| [HAL] / [BIB] / [DOI] |
2019 |
Jean-Charles Passieux, Robin Bouclier. Classic and Inverse Compositional Gauss-Newton in Global DIC
International Journal for Numerical Methods in Engineering, Wiley, 119(6), p.453-468
| [HAL] / [BIB] / [DOI] |
2019 |
S. Prabhakaran, V. Krishnaraj, Shubham Sharma, M. Senthilkumar, R. Jegathishkumar, Redouane Zitoune. Experimental study on thermal and morphological analyses of green composite sandwich made of flax and agglomerated cork
Journal of Thermal Analysis and Calorimetry, Springer Verlag
| [HAL] / [BIB] / [DOI] |
2019 |
Stéphane Colin, Lucien Baldas. Editorial for the special issue on gas flows in microsystems
Micromachines, MDPI, 10(8), p.494
| [HAL] / [BIB] / [DOI] |
2019 |
Sylvain Arki, Jean-François Ferrero, Steven Marguet, Jean-Max Redonnet, Alexandre Aury. Strengthening of a curved composite beam by introducing a flat portion
Composite Structures, Elsevier, 222, p.110863
| [HAL] / [BIB] / [DOI] |
2019 |
John Susainathan, Florent Eyma, Emmanuel de Luycker, Arthur Cantarel, Christophe Bouvet, Bruno Castanié. Experimental investigation of compression and compression after impact of wood-based sandwich structures
Composite Structures, Elsevier, 220, p.236-249
| [HAL] / [BIB] / [DOI] |
2019 |
Leonardo Sanches, Thiago A. M. Guimaraes, Flavio D. Marques. Aeroelastic tailoring of nonlinear typical section using the method of multiple scales to predict post-flutter stable LCOs
Aerospace Science and Technology, Elsevier, 90, p.157-168
| [HAL] / [BIB] / [DOI] |
2019 |
Mohamed Amine Bouhlel, John T. Hwang, Nathalie Bartoli, Rémi Lafage, Joseph Morlier, Joaquim R.R.A. Martins. A Python surrogate modeling framework with derivatives. Une boite à outils en python pour les modèles réduits avec dérivées
Advances in Engineering Software, Elsevier, p.102662
| [HAL] / [BIB] / [DOI] |
2019 |
Elsa Piollet, Edith Roland Fotsing, Annie Ross, Guilhem Michon. High damping and nonlinear vibration of sandwich beams with entangled cross-linked fibres as core material. Amortissement élevé et vibration non-linéaire de poutres sandwichs avec un matériau d'âme à base de fibres enchevêtrées-réticulées
Composites Part B: Engineering, Elsevier, 168, p.353-366
| [HAL] / [BIB] / [DOI] |
2019 |
Donghai Qiu, Manuel Paredes, Sébastien Seguy. Variable pitch spring for nonlinear energy sink: Application to passive vibration control
Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science, SAGE Publications, 233(2), p.611-622
| [HAL] / [BIB] / [DOI] |
2019 |
Yanfeng Gao, Pascale Magaud, Christine Lafforgue, Stéphane Colin, Lucien Baldas. Inertial lateral migration and self-assembly of particles in bidisperse suspensions in microchannel flows
Microfluidics and Nanofluidics, Springer Verlag, 23(7), p.93
| [HAL] / [BIB] / [DOI] |
2019 |
Mathieu Chevalier, Camille Bessaguet, Luis Quiroga-Cortès, Eric Dantras, Guilhem Michon. Experimental Analysis of Non-Linear Damping Performance in Composites Materials Thanks to Local Transduction-Dissipation Phenomenon
NONLINEAR DYNAMICS - Proc. Soc Experimental Mechanics, p.279-281
| [HAL] / [BIB] / [DOI] |
2019 |
Simon Vandevelde, Alain Daidié, Marc Sartor. Evaluation and optimization of heat transfer at the interfaces of spacecraft assemblies
CEAS Space Journal, Springer, 11(2), p.185–191
| [HAL] / [BIB] / [DOI] |
2019 |
Johannes Wolf, Patrice Longère, Jean-Philippe Crété, Jean-Marc M Cadou. Strain localization in ductile materials: Assessment of three X-FEM-based enrichment methods
Mechanics Research Communications, Elsevier, 99, p.1-7
| [HAL] / [BIB] / [DOI] |
2019 |
Muhammad Ilyas, Ghulam Hussain, Christine Espinosa. Failure and strain gradient analyses in incremental forming using GTN model
International Journal of Lightweight Materials and Manufacture, 2(2), p.177-185
| [HAL] / [BIB] / [DOI] |
2019 |
Akshay Hejjaji, Redouane Zitoune, Lotfi Toubal, Laurent Crouzeix, Francis Collombet. Influence of controlled depth abrasive water jet milling on the fatigue behavior of carbon/epoxy composites
Composites Part A: Applied Science and Manufacturing, Elsevier, 121, p.397-410
| [HAL] / [BIB] / [DOI] |
2019 |
Gunasilan Manar, Patrice Longère. Crack arrest capabilities of AA2024 and AA7175 aluminum alloys under impact loading
Engineering Failure Analysis, Elsevier
| [HAL] / [BIB] / [DOI] |
2019 |
Jéromine Dumon, Yannick Bury, Nicolas Gourdain, Laurent Michel. Numerical and experimental investigations of buffet on a diamond airfoil designed for space launcher applications
International Journal of Numerical Methods for Heat and Fluid Flow, Emerald, p.1-17
| [HAL] / [BIB] / [DOI] |
2019 |
Florian Neveu, Bruno Castanié, Philippe Olivier. The GAP methodology: A new way to design composite structures
Materials & Design, Elsevier, 172, p.107755
| [HAL] / [BIB] / [DOI] |
2019 |
Hannah Lois Dorothy, Patrice Longère. Unified modelling of adiabatic shear banding and subsequent micro-voiding driven dynamic failure of viscoplastic solids
International Journal of Impact Engineering, Elsevier, p.103322
| [HAL] / [BIB] / [DOI] |
2019 |
R. Jerez-Mesa, J.A. Travieso-Rodríguez, Yann Landon, G. Dessein, J. Lluma-Fuentes, V. Wagner. Comprehensive analysis of surface integrity modification of ball-end milled Ti-6Al-4V surfaces through vibration-assisted ball burnishing
Journal of Materials Processing Technology, Elsevier, 267, p.230-240
| [HAL] / [BIB] |
2019 |
Marianne Perrin, Imen Yahyaoui, Xiaojing Gong. Acoustic monitoring of timber structures: Influence of wood species under bending loading
Construction and Building Materials, Elsevier, 208, p.125-134
| [HAL] / [BIB] / [DOI] |
2019 |
M. Doumeng, F. Ferry, Karl Delbé, T. Mérian, France Chabert, Florentin Berthet, O. Marsan, V. Nassiet, J. Denape. Evolution of crystallinity of PEEK and glass-fibre reinforced PEEK under tribological conditions using Raman spectroscopy
Wear, Elsevier, 426-427(Part B), p.1040-1046
| [HAL] / [BIB] / [DOI] |
2019 |
Sivalingam Prabhakaran, Vijayan Krishnaraj, Mouleeswaran Senthilkumar, Redouane Zitoune, Krishna Shankar. Effect of water absorption on the flexural strength of a green sandwich composite
Materials Testing, 61(4), p.369-375
| [HAL] / [BIB] / [DOI] |
2019 |
Nathalie Bartoli, Thierry Lefebvre, Sylvain Dubreuil, Romain Olivanti, Rémy Priem, Nicolas Bons, Joaquim R.R. A. Martins, Joseph Morlier. Adaptive modeling strategy for constrained global optimization with application to aerodynamic wing design
Aerospace Science and Technology, Elsevier, 90, p.85-102
| [HAL] / [BIB] / [DOI] |
2019 |
Iman Alhossen, Florian Bugarin, Stéphane Segonds, Fulbert Baudoin, G. Teyssedre. Use of Sobol indexes for efficient parameter estimation in a charge transport model
IEEE Transactions on Dielectrics and Electrical Insulation, Institute of Electrical and Electronics Engineers, 26(2), p.584-592
| [HAL] / [BIB] / [DOI] |
2019 |
Tao Li, Sébastien Seguy, Claude-Henri Lamarque, Alain Berlioz. Experiment-based motion reconstruction and restitution coefficient estimation of a vibro-impact system
Journal of Vibration and Acoustics, American Society of Mechanical Engineers, 141(2), p.021003-8
| [HAL] / [BIB] / [DOI] |
2019 |
Guillermo López Quesada, Giorgos Tatsios, Dimitris Valougeorgis, Marcos Rojas-Cárdenas, Lucien Baldas, Christine Barrot, Stéphane Colin. Design guidelines for thermally driven micropumps of different architectures based on target applications via kinetic modeling and simulations
Micromachines, MDPI, 10(4), p.249
| [HAL] / [BIB] / [DOI] |
2019 |
van Hung Bui, Patrick Gilles, Tarek Sultan, Guillaume Cohen, Walter Rubio. Adaptive speed control for waterjet milling in pocket corners
International Journal of Advanced Manufacturing Technology, Springer Verlag
| [HAL] / [BIB] / [DOI] |
2019 |
Donghai Qiu, Sébastien Seguy, Manuel Paredes. Design criteria for optimally tuned vibro-impact nonlinear energy sink
Journal of Sound and Vibration, Elsevier, 442, p.497-513
| [HAL] / [BIB] / [DOI] |
2019 |
Irene Lara-Ibeas, Alberto Rodríguez-Cuevas, Christina Andrikopoulou, Vincent Person, Lucien Baldas, Stéphane Colin, Stéphane Le Calvé. Sub-ppb level detection of BTEX gaseous mixtures with a compact prototype GC equipped with a preconcentration unit
Micromachines, MDPI, 10(3), p.187
| [HAL] / [BIB] / [DOI] |
2019 |
J. Huang, Marie-Laetitia Pastor, C. Garnier, Xiaojing Gong. A new model for fatigue life prediction based on infrared thermography and degradation process for CFRP composite laminates
International Journal of Fatigue, Elsevier, 120, p.87-95
| [HAL] / [BIB] / [DOI] |
2019 |
Alexandre Lacombe, Yann Landon, Manuel Paredes, Clément Chirol, Audrey Benaben. Numerical simulation of the reaming process in aluminium 2024-T351 – Analysis of the evolution of the material stress state. Simulación numérica del proceso de escariado en aluminio 2024-t351 - Análisis de la evolución del estado de tensión del material
DYNA : Ingenieria e Industria, Federación de Asociaciones de Ingenieros Industriales, 94, p.215-220
| [HAL] / [BIB] / [DOI] |
2019 |
Yiwei Wang, Christian Gogu, Nicolas Binaud, Christian Bes, Jian Fu. A model-based prognostics method for fatigue crack growth in fuselage panels
Chinese Journal of Aeronautics, Elsevier, 32(2), p.396-408
| [HAL] / [BIB] / [DOI] |
2019 |
Bassam Mahmoud, L. Manseri, Ange Rogani, Pablo Navarro, Steven Marguet, Jean-François Ferrero, Issam Tawk. Experimental and numerical study of the damage mechanisms in hybrid unidirectional/woven composites under impact loading
Composite Structures, Elsevier, 209, p.606 - 615
| [HAL] / [BIB] / [DOI] |
2019 |
T. Langella, A. Rogani, Pablo Navarro, Jean-François Ferrero, V. Lopresto, A. Langella. Experimental Study of the Influence of a Tensile Preload on Thin Woven Composite Laminates Under Impact Loading
Journal of Materials Engineering and Performance, Springer Verlag/ASM International
| [HAL] / [BIB] / [DOI] |
2019 |
Damien Texier, Jean-Charles Stinville, Mclean Echlin, Stéphane Pierret, Patrick Villechaise, Tresa Pollock, Jonathan Cormier. Short crack propagation from cracked non-metallic inclusions in a Ni-based polycrystalline superalloy
Acta Materialia, Elsevier, 165, p.241-258
| [HAL] / [BIB] / [DOI] |
2019 |
Menouar Azib, Fulbert Baudoin, Nicolas Binaud, Christina Villeneuve-Faure, G. Teyssedre, Florian Bugarin, Stéphane Segonds. Sensitivity analysis of the electrostatic interaction between the atomic force microscopy probe and a thin dielectric film with 3D-localized charge cloud
Journal of Applied Physics, American Institute of Physics, 125, p.045305
| [HAL] / [BIB] / [DOI] |
2019 |
Xiaohu Chen, Pingze Zhang, Dongbo Wei, Xiao Huang, Adriana Soveja, Michel Chaussumier, Feng Ding, Fengkun Li. Structures and properties of Ti-5Al-5Mo-5V-1Cr-1Fe after Nb implantation
Surface and Coatings Technology, Elsevier
| [HAL] / [BIB] / [DOI] |
2019 |
John Susainathan, Florent Eyma, Emmanuel de Luycker, Arthur Cantarel, Bruno Castanié. Numerical modeling of impact on wood-based sandwich structures
Mechanics of Advanced Materials and Structures, Taylor & Francis
| [HAL] / [BIB] / [DOI] |
2019 |
Célestine Voegel, Nadège Durban, Alexandra Bertron, Yann Landon, Benjamin Erable. Evaluation of microbial proliferation on cementitious materials exposed to biogas systems
Environmental Technology, Taylor & Francis: STM, Behavioural Science and Public Health Titles, p.1-11
| [HAL] / [BIB] |
2019 |
Damien Mauduit, Gilles Dusserre, Thierry Cutard. Influence of temperature cycles on strength and microstructure of spray-deposited Si-Al CE9F alloy
Mechanics of Materials, Elsevier, 131, p.93-101
| [HAL] / [BIB] / [DOI] |
2019 |
Julien Patou, Rébecca Bonnaire, Emmanuel de Luycker, Gérard Bernhart. Influence of consolidation process on voids and mechanical properties of powdered and commingled carbon/PPS laminates
Composites Part A: Applied Science and Manufacturing, Elsevier, 117, p.260-275
| [HAL] / [BIB] / [DOI] |
2019 |
Mike Coulson, Eric Dantras, Philippe Olivier, Nathalie Gleizes, Colette Lacabanne. Thermal conductivity and diffusivity of carbon‐reinforced polyetherketoneketone composites
Journal of Applied Polymer Science, Wiley, 136(38), p.47975
| [HAL] / [BIB] / [DOI] |
2019 |
Elodie Cabrol, Christine Boher, Vanessa Vidal, Farhad Rezai-Aria, F. Touratier. A correlation between tribological behavior and crystal structure of cobalt-based hardfacings
Wear, Elsevier, 426-427(Part B), p.996-1007
| [HAL] / [BIB] / [DOI] |
2019 |
A. Rogani, Pablo Navarro, Steven Marguet, Jean-François Ferrero, C. Lanouette. Tensile post-impact behaviour of thin carbon/epoxy and glass/epoxy hybrid woven laminates – Part I: Experimental study
Composite Structures, Elsevier, 230, p.111508
| [HAL] / [BIB] / [DOI] |
2019 |
Furqan Mukhtar, Faisal Qayyum, Zeeshan Anjum, Masood Shah. Effect of chrome plating and varying hardness on the fretting fatigue life of AISI D2 components
Wear, Elsevier, 418-419, p.215-225
| [HAL] / [BIB] / [DOI] |
2019 |
Jean-Charles Maré. Best practices for model-based and simulation-aided engineering of power transmission and motion control systems
Chinese Journal of Aeronautics, Elsevier, 32(1), p.186-199
| [HAL] / [BIB] |
2019 |
Sinan Boztepe, Olivier de Almeida, Rémi Gilblas, Yannick Le Maoult, Fabrice Schmidt, Christian Gerlach. A combined experimental and numerical approach for radiation heat transfer in semi-crystalline thermoplastics
International Journal of Thermal Sciences, Elsevier, 142, p.142-155
| [HAL] / [BIB] / [DOI] |
2019 |
Camille Bessaguet, Eric Dantras, Guilhem Michon, Mathieu Chevalier, Lydia Laffont, Colette Lacabanne. Electrical behavior of a graphene/PEKK and carbon black/PEKK nanocomposites in the vicinity of the percolation threshold
Journal of Non-Crystalline Solids, Elsevier, 512, p.1-6
| [HAL] / [BIB] / [DOI] |
2019 |
Shiqi Wang, Ahmad Batikh, Lucien Baldas, Azeddine Kourta, Nicolas Mazellier, Stéphane Colin, Stéphane Orieux. On the modelling of the switching mechanisms of a Coanda fluidic oscillator
Sensors and Actuators A: Physical, Elsevier, 299, p.111618
| [HAL] / [BIB] / [DOI] |
2019 |
Hamdi Ben Abdallah, Igor Jovančević, Jean-José Orteu, Ludovic Brèthes. Automatic Inspection of Aeronautical Mechanical Assemblies by Matching the 3D CAD Model and Real 2D Images
Journal of Imaging, MDPI, 5(10), p.81-110
| [HAL] / [BIB] / [DOI] |
2019 |
Jens Schuster, David Müller, Ming-Hong Chen, Quentin Govignon. Ultrasonic Testing Combined with Pattern Recognition for the Detection of Kissing Bonds
Open Journal of Composite Materials, Scientific Research Publishing, 9(3), p.260-270
| [HAL] / [BIB] / [DOI] |
2019 |
Mehdi Salem, Sabine Le Roux, Gilles Dour, Pascal Lamesle, Karim Choquet, Farhad Rezai-Aria. Effect of aluminizing and oxidation on the thermal fatigue damage of hot work tool steels for high pressure die casting applications
International Journal of Fatigue, Elsevier, 119, p.126-138
| [HAL] / [BIB] / [DOI] |
2019 |
Bessam Zeramdini, Camille Robert, Guenaël Germain, Thomas Pottier. Numerical simulation of metal forming processes with 3D adaptive Remeshing strategy based on a posteriori error estimation
International Journal of Material Forming, Springer Verlag, 12(3), p.411–428
| [HAL] / [BIB] / [DOI] |
2019 |
Simone Coniglio, Joseph Morlier, Christian Gogu, Rémi Amargier. Generalized Geometry Projection: A Unified Approach for Geometric Feature Based Topology Optimization
Archives of Computational Methods in Engineering, Springer Verlag, p.1-38
| [HAL] / [BIB] / [DOI] |
2019 |
Abdelmagid El Bakali, Rémi Gilblas, Thomas Pottier, Yannick Le Maoult. A fast and versatile method for spectral emissivity measurement at high temperatures
Review of Scientific Instruments, American Institute of Physics, 90(11), p.115116-1 - 115116-19
| [HAL] / [BIB] / [DOI] |
2019 |
Francis Collombet, Yves Davila, Sergio Avila, Alexander Morales, Laurent Crouzeix, Yves-Henri Grunevald, Hilario Hernandez, Nathalie Rocher, François Cénac. Proof of a composite repair concept for aeronautical structures: a simplified method
Mechanics & Industry, EDP Sciences, 20(8), p.812
| [HAL] / [BIB] / [DOI] |
2019 |
Patrice Longère. Numerical integration of rate constitutive equations in presence of large strains and rotations
Mechanics Research Communications, Elsevier, 95, p.61-66
| [HAL] / [BIB] / [DOI] |
2019 |
Theo Baumard, Gary Menary, Olivier de Almeida, Peter Martin, Fabrice Schmidt, Jérôme Bikard. Experimental characterization and modeling of the temperature and rate-dependent shear behaviour of powder-impregnated glass fiber/PA66 woven semipregs
Composites Science and Technology, Elsevier, 180, p.23-32
| [HAL] / [BIB] / [DOI] |
2019 |
Jérôme Molimard, Rébecca Bonnaire, Woo Suck Han, Reynald Convert, Paul Calmels. In-silico pre-clinical trials are made possible by a new simple and comprehensive lumbar belt mechanical model based on the Law of Laplace including support deformation and adhesion effects
PLoS ONE, Public Library of Science, 14(3), p.e0212681
| [HAL] / [BIB] / [DOI] |
2019 |
Lilian Martineau, France Chabert, Benjamin Boniface, Gérard Bernhart. Effect of interfacial crystalline growth on autohesion of PEEK
International Journal of Adhesion and Adhesives, Elsevier, 89, p.82-87
| [HAL] / [BIB] / [DOI] |
2019 |
T. Hirschler, Robin Bouclier, A. Duval, T. Elguedj, Joseph Morlier. The Embedded Isogeometric Kirchhoff-Love Shell: from Design to Shape Optimization of non-conforming stiffened multipatch Structures
Computer Methods in Applied Mechanics and Engineering, Elsevier
| [HAL] / [BIB] / [DOI] |
2019 |
Rémi Bertrand, Hugo Robe, Damien Texier, Yasser Zedan, Eric Feulvarch, Philippe Bocher. Analysis of AA2XXX/AA7XXX friction stir welds
Journal of Materials Processing Technology, Elsevier, 271, p.312-324
| [HAL] / [BIB] / [DOI] |
2019 |
Pierre Ouagne, Alain Bourmaud, Emmanuel de Luycker, Philippe Evon, Marina Fazzini, Francis Collombet. 3rd edition of the young researchers' days in bio-sourced composites
Revue des composites et des matériaux avancés = Journal of Composite and Advanced Materials, IIETA, 29(5), p.275-276
| [HAL] / [BIB] / [DOI] |
2019 |
A. Rogani, Pablo Navarro, Steven Marguet, Jean-François Ferrero, C. Lanouette. Tensile post-impact behaviour of thin carbon/epoxy and glass/epoxy hybrid woven laminates – Part II: Numerical study
Composite Structures, Elsevier, 230, p.111455
| [HAL] / [BIB] / [DOI] |
2019 |
Xi Li, Dayou Ma, Huifang Liu, Wei Tan, Xiaojing Gong, Chao Zhang, Yulong Li. Assessment of failure criteria and damage evolution methods for composite laminates under low-velocity impact
Composite Structures, Elsevier, 207, p.727-739
| [HAL] / [BIB] / [DOI] |
2019 |
Pablo Garcia Perez, Christophe Bouvet, Ameur Chettah, Frédéric Dau, Ludovic Ballère, Patrick Peres. Effect of unstable crack growth on mode II interlaminar fracture toughness of a thermoplastic PEEK composite
Engineering Fracture Mechanics, Elsevier, 205, p.486-497
| [HAL] / [BIB] / [DOI] |
2019 |
J.H. Liu, N. Vanderesse, J.-C. Stinville, T.M. Pollock, P. Bocher, Damien Texier. IN-PLANE and out-of-plane deformation at the SUB-GRAIN scale in polycrystalline materials assessed by confocal microscopy
Acta Materialia, Elsevier, 169, p.260-274
| [HAL] / [BIB] / [DOI] |
2019 |
Shahriar Bakrani Balani, France Chabert, Valérie Nassiet, Arthur Cantarel. Influence of printing parameters on the stability of deposited beads in fused filament fabrication of poly(lactic) acid
Additive Manufacturing, Elsevier, 25, p.112-121
| [HAL] / [BIB] |
2019 |
G. Lélias, Eric Paroissien, Frederic Lachaud, Joseph Morlier. Experimental Characterization of Cohesive Zone Models for Thin Adhesive Layers Loaded in Mode I, Mode II, and Mixed-Mode I/II by the use of a Direct Method
International Journal of Solids and Structures, Elsevier
| [HAL] / [BIB] / [DOI] |
2019 |
Eric Paroissien, Frederic Lachaud, Lucas Filipe Martins Da Silva, Salah Hammidi Seddiki. A comparison between macro-element and finite element solutions for the stress analysis of functionally graded single-lap joints
Composite Structures, Elsevier, 215, p.331-350
| [HAL] / [BIB] / [DOI] |
2019 |
Thierry Sentenac, Rémi Gilblas, Florian Bugarin. Trichromatic thermoreflectometry for an improved accuracy of true temperature field measurement on a multi-material part
International Journal of Thermal Sciences, Elsevier, 145, p.art. 105980
| [HAL] / [BIB] / [DOI] |
2019 |
Hiroyuki Imai, Gen Yamane, Hiroaki Matsumoto, Vanessa Vidal, Vincent Velay. Superplasticity of metastable ultrafine-grained Ti 6242S alloy: Mechanical flow behavior and microstructural evolution
Materials Science and Engineering: A, Elsevier, 754, p.569-580
| [HAL] / [BIB] / [DOI] |
2019 |
Anwar Hamasaiid, Matthew Dargusch, Gilles Dour. The impact of the casting thickness on the interfacial heat transfer and solidification of the casting during permanent mold casting of an A356 alloy
Journal of Manufacturing Processes, Society of Manufacturing Engineers, 47, p.229-237
| [HAL] / [BIB] / [DOI] |
2019 |
Shahriar Bakrani Balani, France Chabert, Valérie Nassiet, Arthur Cantarel. Influence of the printing parameters on the stability of the deposited beads in fused filament fabrication of poly(lactic) acid
Additive Manufacturing, Elsevier, 25, p.112-121
| [HAL] / [BIB] / [DOI] |
2019 |
Xiao Huang, Nick Tepylo, Valérie Pommier-Budinger, Marc Budinger, Elmar Bonaccurso, Philippe Villedieu, Lokman Bennani. A survey of icephobic coatings and their potential use in a hybrid coating/active ice protection system for aerospace applications
Progress in Aerospace Sciences, Elsevier, 105, p.74-97
| [HAL] / [BIB] / [DOI] |
2019 |
Miora Ramanakoto, Tahiana Ramananantoandro, Florent Eyma, Bruno Castanié. Visuo-tactile and topographic characterizations of finished wood surface quality by French consumers and industrials: acceptability thresholds for raised grain
Annals of Forest Science, Springer Nature (since 2011)/EDP Science (until 2010), 76(1), p.26
| [HAL] / [BIB] / [DOI] |
2019 |
Simone Coniglio, Christian Gogu, Rémi Amargier, Joseph Morlier. Engine Pylon Topology Optimization Framework Based on Performance and Stress Criteria
AIAA Journal, American Institute of Aeronautics and Astronautics, 57(12), p.5514-5526
| [HAL] / [BIB] / [DOI] |
2019 |
D. Guivarch, E. Mermoz, Y Marino, M. Sartor. Creation of helicopter dynamic systems digital twin using multibody simulations
CIRP Annals - Manufacturing Technology, Elsevier
| [HAL] / [BIB] / [DOI] |
2019 |
Quentin Sirvin, Vincent Velay, Rébecca Bonnaire, Luc Penazzi. Mechanical behaviour modelling and finite element simulation of simple part of Ti-6Al-4V sheet under hot/warm stamping conditions
Journal of Manufacturing Processes, Society of Manufacturing Engineers, 38, p.472-482
| [HAL] / [BIB] / [DOI] |
2019 |
Céline Vicard, Olivier de Almeida, Arthur Cantarel, Gérard Bernhart. Modeling of the polymerization and crystallization kinetic coupling of polyamide 6 synthesized from ε-caprolactam
Polymer, Elsevier, 180, p.121681
| [HAL] / [BIB] / [DOI] |
2019 |
Christine Boher, Vanessa Vidal, Elodie Cabrol, Y. Berthier, Farhad Rezai-Aria. Shear mode M3 in the first sites of ductile metallic alloys: Some considerations on the physical mechanisms leading to internal particle flows
Wear, Elsevier, 426-427(Part B), p.1152-1162
| [HAL] / [BIB] / [DOI] |
2019 |
Benjamin Valès, Steven Marguet, Romain Créac'Hcadec, Laurent Sohier, Jean-François Ferrero, Pablo Navarro. An Experimental Method Dedicated to the Dynamic Characterization of Structural Adhesives under Drop Weight Conditions. Une méthode expérimentale dédiée à la caractérisation dynamique d'adhésifs structuraux testés par poids tombant
International Journal of Adhesion and Adhesives, Elsevier, 90, p.106-125
| [HAL] / [BIB] / [DOI] |
2019 |
Smr M R Kazmi, Quentin Govignon, Simon Bickerton. Control of laminate quality for parts manufactured using the resin infusion process
Journal of Composite Materials, SAGE Publications, 53(3), p.327-343
| [HAL] / [BIB] / [DOI] |
2019 |
Laurent Mezeix, Simon Dols, Christophe Bouvet, Bruno Castanié, Jean-Paul Giavarini, Natthawat Hongkarnjanakul. Experimental analysis of impact and post-impact behaviour of inserts in Carbon sandwich structures
Journal of Sandwich Structures and Materials, SAGE Publications, 21(1), p.135-153
| [HAL] / [BIB] / [DOI] |
2019 |
Benoît Vieille, Juan Daniel Pujols Gonzalez, Christophe Bouvet. Prediction of the ultimate strength of quasi-isotropic TP-based laminates structures from tensile and compressive fracture toughness at high temperature
Composites Part B: Engineering, Elsevier, 164, p.437-446
| [HAL] / [BIB] / [DOI] |
2019 |
Arturo Gomez Ortega, Luis Corona Galvan, Mehdi Salem, Kamel Moussaoui, Stéphane Segonds, Sébastien Rouquette, Frédéric Deschaux-Beaume. Characterisation of 4043 aluminium alloy deposits obtained by wire and arc additive manufacturing using a Cold Metal Transfer process
Science and Technology of Welding and Joining, Maney Publishing, 24(6), p.538-547
| [HAL] / [BIB] / [DOI] |
2019 |
Fatma Naiiri, Lamis Allègue, Mehdi Salem, Redouane Zitoune, Mondher Zidi. The effect of doum palm fibers on the mechanical and thermal properties of gypsum mortar
Journal of Composite Materials, SAGE Publications, 53(19), p.2641–2659
| [HAL] / [BIB] / [DOI] |
2019 |
Gilles Dour, Mehdi Salem, Sabine Le Roux, Damien Texier, Farid Medjedoub, Pascal Lamesle, Farhad Rezai-Aria. AnT²COK, an analytical model for cyclic oxidation kinetics of hot-work tool steels in transient thermal cycling conditions
Corrosion Science, Elsevier, 147, p.169-181
| [HAL] / [BIB] / [DOI] |
2019 |
N. Nguyen-Dinh, Redouane Zitoune, Christophe Bouvet, Sabine Le Roux. Surface integrity while trimming of composite structures: X-ray tomography analysis
Composite Structures, Elsevier, 210, p.735-746
| [HAL] / [BIB] / [DOI] |
2019 |
Olivier de Almeida, Jean-François Ferrero, Laurent Escale, Gérard Bernhart. Charpy test investigation of the influence of fabric weave and fibre nature on impact properties of PEEK-reinforced composites
Journal of Thermoplastic Composite Materials, SAGE Publications (UK and US), 32(6), p.729–745
| [HAL] / [BIB] / [DOI] |
2019 |
Dorian Delbergue, Damien Texier, Martin Lévesque, Philippe Bocher. Diffracting-grain identification from electron backscatter diffraction maps during residual stress measurements: a comparison between the sin 2 ψ and cosα methods
Journal of Applied Crystallography, International Union of Crystallography, 52(4), p.828-843
| [HAL] / [BIB] / [DOI] |
2019 |
Manuel Paredes, Thomas Stephan, Hervé Orcière. Enhanced formulae for determining the axial behavior of cylindrical extension springs
Mechanics & Industry, EDP Sciences, 20(6), p.625
| [HAL] / [BIB] / [DOI] |
2019 |
Fatna Benmessaoud, Vincent Velay, Mohammed Cheikh, Vanessa Vidal, Christine Boher, Farhad Rezai-Aria. Multi-Scale Numerical Analysis of the Effect of Microstructural Features on the Mechanical Behavior of Polycrystalline Ti-6Al-4V Alloy
Chemical Engineering Transactions, AIDIC, 67(2), p.227 - 242
| [HAL] / [BIB] / [DOI] |
2018 |
Fenglin Liang, Martial Sauceau, Gilles Dusserre, Jean-Louis Dirion, Patricia Arlabosse. Modelling of the rheological behavior of mechanically dewatered sewage sludge in uniaxial cyclic compression
Water Research, IWA Publishing/Elsevier, 147, p.413-421
| [HAL] / [BIB] / [DOI] |
2018 |
G. Pennisi, B.P. Mann, N. Naclerio, C. Stephan, Guilhem Michon. Design and experimental study of a Nonlinear Energy Sink coupled to an electromagnetic energy harvester
Journal of Sound and Vibration, Elsevier, 437, p.340-357
| [HAL] / [BIB] / [DOI] |
2018 |
Sinh-Khoa Nguyen, Pierre-Louis Chiambaretto, M. Charlotte, Philippe Villedieu, Joseph Morlier, Yves Gourinat. Towards an analytical formulation for Fluid Structure tank vibration analysis: Modal equivalency using granular materials
Engineering Structures, Elsevier, 177, p.345-356
| [HAL] / [BIB] / [DOI] |
2018 |
N. Dubary, Christophe Bouvet, Samuel Rivallant, L. Ratsifandrihana. Damage tolerance of an impacted composite laminate
Composite Structures, Elsevier, 206, p.261-271
| [HAL] / [BIB] / [DOI] |
2018 |
Fadhel Chatti, Christophe Bouvet, Dominique Poquillon, Guilhem Michon. Numerical modelling of shear hysteresis of entangled cross-linked carbon fibres intended for core material
Computational Materials Science, Elsevier, 155, p.350-363
| [HAL] / [BIB] / [DOI] |
2018 |
Hari P.N. Nagarajan, Hossein Mokhtarian, Hesam Jafarian, Saoussen Dimassi, Shahriar Bakrani Balani, Azarakhsh Hamedi, Eric Coatanea, Gary G. Wang, Karl Haapala. Knowledge based optimization of artificial neural network topology for additive manufacturing process modeling: a case study for fused deposition modeling
Journal of Mechanical Design, American Society of Mechanical Engineers
| [HAL] / [BIB] / [DOI] |
2018 |
Valérie Pommier-Budinger, Marc Budinger, Pierrick Rouset, Fabien Dezitter, Florent Huet, Marc Wetterwald, Elmar Bonaccurso. Electro-mechanical Resonant Ice Protection Systems: Initiation of Fractures with Piezoelectric Actuators
AIAA Journal, American Institute of Aeronautics and Astronautics, 56(11)
| [HAL] / [BIB] / [DOI] |
2018 |
Eric Paroissien, Lucas F.M. da Silva, Frederic Lachaud. Simplified stress analysis of functionally graded single-lap joints subjected to combined thermal and mechanical loads
Composite Structures, Elsevier, 203, p.85 - 100
| [HAL] / [BIB] / [DOI] |
2018 |
Anupam Gupta, Pascale Magaud, Christine Lafforgue, Micheline Abbas. Conditional stability of particle alignment in finite-Reynolds-number channel flow
Physical Review Fluids, American Physical Society, 3(11)
| [HAL] / [BIB] / [DOI] |
2018 |
Thierry Sentenac, Florian Bugarin, Benoit Ducarouge, Michel Devy. Automated thermal 3 D reconstruction based on a robot equipped with uncalibrated infrared stereovision cameras
Advanced Engineering Informatics, Elsevier, 38, p.203 - 215
| [HAL] / [BIB] / [DOI] |
2018 |
Robin Bouclier, Jean-Charles Passieux. A Nitsche-based non-intrusive coupling strategy for global/local isogeometric structural analysis
Computer Methods in Applied Mechanics and Engineering, Elsevier, 340, p.253-277
| [HAL] / [BIB] / [DOI] |
2018 |
Simone Coniglio, Christian Gogu, Joseph Morlier. Weighted Average Continuity Approach and Moment Correction New strategies for non-consistent mesh projection in structural mechanics
Archives of Computational Methods in Engineering, Springer Verlag
| [HAL] / [BIB] / [DOI] |
2018 |
Arnaud Wilhelm, Samuel Rivallant, Jean-François Ferrero, Joseph Morlier. Sandwich shield subjected to bird impact: Use of surrogate models for influencing parameter analysis and shield behaviour understanding
Journal of Sandwich Structures and Materials, SAGE Publications, p.109963621878960
| [HAL] / [BIB] / [DOI] |
2018 |
Abderrahmane Djabali, Lotfi Toubal, Redouane Zitoune, Saïd Rechak. An experimental investigation of the mechanical behavior and damage of thick laminated carbon/epoxy composite
Composite Structures, Elsevier, 184, p.178--190
| [HAL] / [BIB] / [DOI] |
2018 |
R. Jerez-Mesa, Yann Landon, J.A. Travieso-Rodriguez, G. Dessein, J. Lluma-Fuentes, V. Wagner. Topological surface integrity modification of AISI 1038 alloy after vibration-assisted ball burnishing
Surface and Coatings Technology, Elsevier, 349, p.364-377
| [HAL] / [BIB] |
2018 |
O. Quénard, Olivier Dorival, Ph. Guy, A. Votié, K. Brethome. Measurement of fracture toughness of metallic materials produced by additive manufacturing
CEAS Space Journal, Springer, 10(3), p.343 - 353
| [HAL] / [BIB] / [DOI] |
2018 |
K. Moussaoui, Walter Rubio, Michel Mousseigne, T. Sultan, Farhad Rezai-Aria. Effects of Selective Laser Melting additive manufacturing parameters of Inconel 718 on porosity, microstructure and mechanical properties
Materials Science and Engineering: A, Elsevier, 735, p.182 - 190
| [HAL] / [BIB] / [DOI] |
2018 |
Marc Budinger, Valérie Pommier-Budinger, Lokman Bennani, Pierrick Rouset, Elmar Bonaccurso, Fabien Dezitter. Electromechanical Resonant Ice Protection Systems: Analysis of Fracture Propagation Mechanisms
AIAA Journal, American Institute of Aeronautics and Astronautics, 56(11), p.4412-4422
| [HAL] / [BIB] / [DOI] |
2018 |
Chen Li, Arthur Cantarel, Xiaojing Gong. Influence of structural parameters at microscale on the fiber reinforcement
Journal of Composite Materials, SAGE Publications, 53(7), p.863-872
| [HAL] / [BIB] / [DOI] |
2018 |
Mahdi Masoumi Khalilabad, Yasser Zedan, Damien Texier, Mohammad Jahazi, Philippe Bocher. Effect of tool geometry and welding speed on mechanical properties of dissimilar AA2198–AA2024 FSWed joint
Journal of Manufacturing Processes, Society of Manufacturing Engineers, 34(Part A), p.86 - 95
| [HAL] / [BIB] / [DOI] |
2018 |
Mahmoud Harzallah, Thomas Pottier, Rémi Gilblas, Yann Landon, Michel Mousseigne, Johanna Senatore. A coupled in-situ measurement of temperature and kinematic fields in Ti-6Al-4V serrated chip formation at micro-scale
International Journal of Machine Tools and Manufacture, Elsevier
| [HAL] / [BIB] / [DOI] |
2018 |
Sabine Le Roux, Mehdi Salem, Anis Hor. Improvement of the bridge curvature method to assess residual stresses in selective laser melting
Additive Manufacturing, Elsevier, 22, p.320-329
| [HAL] / [BIB] / [DOI] |
2018 |
Fadhel Chatti, Dominique Poquillon, Christophe Bouvet, Guilhem Michon. Numerical modelling of entangled carbon fibre material under compression
Computational Materials Science, Elsevier, 151, p.14-24
| [HAL] / [BIB] / [DOI] |
2018 |
S. Braiek, A. Ben Khalifa, Redouane Zitoune, M. Zidi. Experimental and numerical investigation of adhesively bonded \textpm55° filament wound tubular specimens under internal pressure
Engineering Fracture Mechanics, Elsevier, 199, p.461--475
| [HAL] / [BIB] / [DOI] |
2018 |
Dominique Fratantonio, Marcos Rojas-Cárdenas, Hacene Si Hadj Mohand, Christine Barrot, Lucien Baldas, Stéphane Colin. Molecular tagging velocimetry for confined rarefied gas flows: Phosphorescence emission measurements at low pressure
Experimental Thermal and Fluid Science, Elsevier, 99, p.510-524
| [HAL] / [BIB] / [DOI] |
2018 |
Christopher R. Cater, Xinran Xiao, Robert K. Goldberg, Xiaojing Gong. The influence of interlaminar microstructure on micro-cracking at laminate free edge
Composites Part A: Applied Science and Manufacturing, Elsevier, 110, p.217--226
| [HAL] / [BIB] / [DOI] |
2018 |
Joseph Morlier, Aniello Basile, Ankit Chiplunkar, M. Charlotte. An EGO-like Optimization Framework for Sensor Placement Optimization in Modal Analysis
Smart Materials and Structures, IOP Publishing, vol. 27(n° 7), pp. 075004-075022
| [HAL] / [BIB] / [DOI] |
2018 |
Xiahu Chen, Adriana Soveja, Michel Chaussumier, Pingze Zhang, Dongbo Wei, Feng Ding. Effect of MEVVA ion implantation on fatigue properties of TC18 titanium alloy
Surface and Coatings Technology, Elsevier, 344(25), p.572--578
| [HAL] / [BIB] / [DOI] |
2018 |
Maxime Rollin, Luc Penazzi, Vincent Velay, Alain Dupuy, Sylvie Gallet. A new numerical strategy for SPF pressure profile computing based on statistical strain rate controlling
International Journal of Mechanical Sciences, Elsevier, 141, p.479-490
| [HAL] / [BIB] / [DOI] |
2018 |
Johannes Wolf, Patrice Longère, Jean-Marc Cadou, Jean-Philippe Crété. Numerical modeling of strain localization in engineering ductile materials combining cohesive models and X-FEM
International Journal of Mechanics and Materials in Design, Springer Verlag, 14(2), p.177-193
| [HAL] / [BIB] / [DOI] |
2018 |
Juan de Dios Rodriguez-Ramirez, Bruno Castanié, Christophe Bouvet. Experimental and numerical analysis of the shear nonlinear behaviour of Nomex honeycomb core: Application to insert sizing
Composite Structures, Elsevier, vol. 193, pp. 121-139
| [HAL] / [BIB] / [DOI] |
2018 |
Catherine Pons Lelardeux, Michel Galaup, David Panzoli, Pierre Lagarrigue, Jean-Pierre Jessel. A Method to Design a Multi-Player Educational Scenario to Make Interdisciplinary Teams Experiment Risk Management Situation in a Digital Collaborative Learning Game: A Case of Study in Healthcare
International Journal of Engineering Pedagogy (iJEP), International Association of Online Engineering (IAOE), 8(2), p.88-100
| [HAL] / [BIB] / [DOI] |
2018 |
Eric Paroissien, Frederic Lachaud, Joseph Morlier, S. Schwartz. A Direct Method for the Assessment of Cohesive Zone Models for Thin Adhesive Layers Loaded in Mode I, Mode II, and Mixed-Mode I/II
Reviews of Adhesion and Adhesives
| [HAL] / [BIB] / [DOI] |
2018 |
Lotfi Toubal, Redouane Zitoune, Francis Collombet, Nathalie Rocher Gleizes. Moisture Effects on the Material Properties of a Jute/Epoxy Laminate: Impulse Excitation Technique Contribution
Journal of Natural Fibers, Taylor & Francis, 15(1), p.39-52
| [HAL] / [BIB] / [DOI] |
2018 |
Marie Georgelin-Gurgel, Raphaël Devillard, Marie-Eve Lauret, Franck Diemer, Paul Calas, Martine Hennequin. Root Canal Shaping Using Rotary Nickel-Titanium Files in Preclinical Teaching
Odonto - Stomatologie Tropical = Tropical Dental Journal, APIDPM Santé tropicale
| [HAL] / [BIB] |
2018 |
Soumaya Naanani, Jean-Philippe Monchoux, Catherine Mabru, Alain Couret. Pure climb of [001] dislocations in TiAl at 850 °C
Scripta Materialia, Elsevier, 149, p.53-57
| [HAL] / [BIB] / [DOI] |
2018 |
Ernane Silva, Cesar Deschamps, Marcos Rojas-Cárdenas, Christine Barrot-Lattes, Lucien Baldas, Stéphane Colin. A time-dependent method for the measurement of mass flow rate of gases in microchannels
International Journal of Heat and Mass Transfer, Elsevier, 120, p.422 - 434
| [HAL] / [BIB] / [DOI] |
2018 |
Jian Fu, Jean-Charles Maré, Liming Yu, Yongling Fu. Multi-level virtual prototyping of electromechanical actuation system for more electric aircraft
Chinese Journal of Aeronautics, Elsevier, 31(5), p.892-913
| [HAL] / [BIB] |
2018 |
Nawel Glaa, Kamel Mehdi, Redouane Zitoune. Numerical modeling and experimental analysis of thrust cutting force and torque in drilling process of titanium alloy Ti6Al4V
International Journal of Advanced Manufacturing Technology, Springer Verlag, 96(5), p.2815-2824
| [HAL] / [BIB] / [DOI] |
2018 |
Donghai Qiu, Tao Li, Sébastien Seguy, Manuel Paredes. Efficient targeted energy transfer of bistable nonlinear energy sink: application to optimal design
Nonlinear Dynamics, Springer Verlag, 92(2), p.443-461
| [HAL] / [BIB] / [DOI] |
2018 |
Oleksii Shtehin, Sébastien Seguy, Vincent Wagner, Yann Landon, Gilles Dessein, Michel Mousseigne. Low-frequency chatter genesis during inclined surface copy-milling with ball-end mill: Experimental study
Machining Science and Technology, Taylor & Francis, 22(4), p.621-637
| [HAL] / [BIB] / [DOI] |
2018 |
Hang Li, Marianne Perrin, Florent Eyma, Xavier Jacob, Vincent Gibiat. Moisture content monitoring in glulam structures by embedded sensors via electrical methods
Wood Science and Technology, Springer Verlag, 52(3), p.733--752
| [HAL] / [BIB] / [DOI] |
2018 |
Florian Pascal, Olivier Dorival, Pablo Navarro, Steven Marguet, Jean-François Ferrero. Impact damage prediction in thin woven composite laminates-Part I: Modeling strategy and validation
Composite Structures, Elsevier, 190, p.32 - 42
| [HAL] / [BIB] / [DOI] |
2018 |
Christopher R. Cater, Xinran Xiao, Robert K. Goldberg, Xiaojing Gong. Multiscale investigation of micro-scale stresses at composite laminate free edge
Composite Structures, Elsevier, 189, p.545--552
| [HAL] / [BIB] / [DOI] |
2018 |
Stéphane Amiel, Etienne Copin, Thierry Sentenac, Philippe Lours, Yannick Le Maoult. On the thermal sensitivity and resolution of a YSZ:Er 3+ /YSZ:Eu 3+ fluorescent thermal history sensor
Sensors and Actuators A: Physical, Elsevier, 272, p.42-52
| [HAL] / [BIB] / [DOI] |
2018 |
Florian Pascal, Ange Rogani, Bassam Mahmoud, Pablo Navarro, Steven Marguet, Jean-François Ferrero. Impact damage prediction in thin woven composite laminates – Part II: Application to normal and oblique impacts on sandwich structure
Composite Structures, Elsevier, 190, p.43 - 51
| [HAL] / [BIB] / [DOI] |
2018 |
Menouar Azib, Fulbert Baudoin, Nicolas Binaud, Christina Villeneuve-Faure, Florian Bugarin, Stéphane Segonds, G. Teyssedre. Numerical simulations for quantitative analysis of electrostatic interaction between atomic force microscopy probe and an embedded electrode within a thin dielectric: meshing optimization, sensitivity to potential distribution and impact of cantilever contribution
Journal of Physics D: Applied Physics, IOP Publishing, 51, p.165302
| [HAL] / [BIB] / [DOI] |
2018 |
Aurélien Mondière, Valentine Déneux, Nicolas Binot, Denis Delagnes. Controlling the MC and M2C carbide precipitation in Ferrium® M54® steel to achieve optimum ultimate tensile strength/fracture toughness balance
Materials Characterization, Elsevier, 140, p.103 - 112
| [HAL] / [BIB] / [DOI] |
2018 |
Tao Li, Claude-Henri Lamarque, Sébastien Seguy, Alain Berlioz. Chaotic characteristic of a linear oscillator coupled with vibro-impact nonlinear energy sink
Nonlinear Dynamics, Springer Verlag, 91(4), p.2319-2330
| [HAL] / [BIB] / [DOI] |
2018 |
Mickaël Duval, Alexei Lozinski, Jean-Charles Passieux, Michel Salaün. Residual error based adaptive mesh refinement with the non-intrusive patch algorithm
Computer Methods in Applied Mechanics and Engineering, Elsevier, 329, p.118-143
| [HAL] / [BIB] / [DOI] |
2018 |
Patrice Longère. Respective/combined roles of thermal softening and dynamic recrystallization in adiabatic shear banding initiation
Mechanics of Materials, Elsevier, 117, p.81 - 90
| [HAL] / [BIB] / [DOI] |
2018 |
Fabien Blas, Florence Ansart, Philippe Lours, Jean-Pierre Bonino, Sandrine Duluard, Vanessa Vidal, Lisa Pin, Guillaume Pujol, Luiza Bonin. Processing thermal barrier coatings via sol-gel route: crack network control and durability
Surface and Coatings Technology, Elsevier, 334, p.71-77
| [HAL] / [BIB] / [DOI] |
2018 |
Mahamadou Mounkaila, Sonia Sassi, Abbas Hamadi, Philippe Marguerès, Philippe Olivier, Christophe Escriba, Thierry Camps. Modelling the electrical behaviour of carbon/epoxy composites and monitoring changes in their microstructure during oven and autoclave curing using electrical impedancemetry
Smart Materials and Structures, IOP Publishing
| [HAL] / [BIB] / [DOI] |
2018 |
Matthias Barus, Hélène Welemane, Valérie Nassiet, Marie-Laetitia Pastor, Arthur Cantarel, Francis Collombet, Laurent Crouzeix, Yves-Henri Grunevald. NDT-based design of joint material for the detection of bonding defects by infrared thermography
NDT & E International, Elsevier, 93, p.157-163
| [HAL] / [BIB] / [DOI] |
2018 |
Damien Texier, F. Atmani, P. Bocher, F. Nadeau, Jie Chen, Y. Zedan, N. Vanderesse, V. Demers. Fatigue performances of FSW and GMAW aluminum alloys welded joints: Competition between microstructural and structural-contact-fretting crack initiation
International Journal of Fatigue, Elsevier, 116, p.20-233
| [HAL] / [BIB] / [DOI] |
2018 |
Yves Davila, Laurent Crouzeix, Bernard Douchin, Francis Collombet, Yves-Henri Grunevald. Identification and Modelling of the In-Plane Reinforcement Orientation Variations in a CFRP Laminate Produced by Manual Lay-Up
Applied Composite Materials, Springer Verlag (Germany), 25(3), p.647-660
| [HAL] / [BIB] / [DOI] |
2018 |
Michel Bornert, Pascal Doumalin, Jean-Christophe Dupré, Christophe Poilâne, Laurent Robert, Evelyne Toussaint, Bertrand Wattrisse. Assessment of Digital Image Correlation Measurement Accuracy in the Ultimate Error Regime: Improved Models of Systematic and Random Errors
Experimental Mechanics, Society for Experimental Mechanics, 58(1), p.33-48
| [HAL] / [BIB] / [DOI] |
2018 |
F. Soulas, Christine Espinosa, Frederic Lachaud, S. Guinard, Bruno Lepetit, I. Revel, Y. Duval. A method to replace lightning strike tests by ball impacts in the design process of lightweight composite aircraft panels
International Journal of Impact Engineering, Elsevier, 111, p.165-176
| [HAL] / [BIB] / [DOI] |
2018 |
Mohamed Amine Bouhlel, Nathalie Bartoli, Rommel G. Regis, Abdelkader Otsmane, Joseph Morlier. Efficient Global Optimization for high-dimensional constrained problems by using the Kriging models combined with the Partial Least Squares method. Approche d’optimisation globale pour des problèmes contraints en grande dimension en utilisant les modèles de krigeage et la méthode de régression des moindres carrés partiels
Engineering Optimization, Taylor & Francis
| [HAL] / [BIB] / [DOI] |
2018 |
Donghai Qiu, Sébastien Seguy, Manuel Paredes. Tuned Nonlinear Energy Sink With Conical Spring: Design Theory and Sensitivity Analysis
Journal of Mechanical Design, American Society of Mechanical Engineers, 140(1), p.011404
| [HAL] / [BIB] / [DOI] |
2018 |
Sylvian Dubreuil, Michel Salaün, Emmanuel Rodriguez, Frank Petitjean. Construction and identification of a D-Vine model applied to the probability distribution of modal parameters in structural dynamics
Mechanical Systems and Signal Processing, Elsevier, vol. 98, pp. 190-208
| [HAL] / [BIB] / [DOI] |
2018 |
Sinan Boztepe, Rémi Gilblas, Olivier de Almeida, Christian Gerlach, Yannick Le Maoult, Fabrice Schmidt. The role of microcrystalline structure on optical scattering characteristics of semi-crystalline thermoplastics and the accuracy of numerical input for IR-heating modeling
International Journal of Material Forming, Springer Verlag, 11(5), p.717-727
| [HAL] / [BIB] / [DOI] |
2018 |
Patrice Longère. Adiabatic shear banding assisted dynamic failure: Some modeling issues
Mechanics of Materials, Elsevier, 116, p.49-66
| [HAL] / [BIB] / [DOI] |
2018 |
Renaud Julien, Vincent Velay, Vanessa Vidal, Yoann Dahan, Romain Forestier, Farhad Rezai-Aria. Characterization and modeling of forged Ti-6Al-4V Titanium alloy with microstructural considerations during quenching process
International Journal of Mechanical Sciences, Elsevier, 142-143, p.456-467
| [HAL] / [BIB] / [DOI] |
2018 |
S. Dubreuil, N. Bartoli, Christian Gogu, T. Lefebvre, J. Mas Colomer. Extreme value oriented random field discretization based on an hybrid polynomial chaos expansion — Kriging approach. Discrétisation de champs aléatoires pour l’étude des valeurs extrêmes par une approche hybride couplant décomposition par chaos polynomial et krigeage.
Computer Methods in Applied Mechanics and Engineering, Elsevier, 332, p.540-571
| [HAL] / [BIB] / [DOI] |
2018 |
Maxime Boulanghien, Mohamed R'Mili, Gérard Bernhart, Florentin Berthet, Yannick Soudais. Mechanical Characterization of Carbon Fibres Recycled by Steam Thermolysis
A Statistical Approach
Advances in Materials Science and Engineering, Hindawi Publishing Corporation, 2018, art. 8630232-10 p.
| [HAL] / [BIB] / [DOI] |
2018 |
Zhorachaid Thanawarothon, Paripat Pairat, Christophe Bouvet, Laurent Mezeix. Noncircular CFRP bicycle’s chainring. part I: static and low-velocity impact analysis
Composites: Mechanics, Computations, Applications: An International Journal, 9(3), p.189-205
| [HAL] / [BIB] / [DOI] |
2018 |
Zhorachaid Thanawarothon, Abdelrahman Elmikaty, Christophe Bouvet, Laurent Mezeix. Noncircular CFRP bicycle’s chainring, part II: finite element analysis
Composites: Mechanics, Computations, Applications: An International Journal, 9(3), p.207-222
| [HAL] / [BIB] / [DOI] |
2018 |
Yiwei Wang, Christian Gogu, Nicolas Binaud, Christian Bes, Raphaël Haftka, Nam-Ho Kim. Predictive airframe maintenance strategies using model-based prognostics
Proceedings of the Institution of Mechanical Engineers, Part O: Journal of Risk and Reliability, SAGE Publications, 232(6), p.690-709
| [HAL] / [BIB] / [DOI] |
2018 |
Benoît Vieille, Juan Daniel Pujols Gonzalez, Christophe Bouvet. Fracture mechanics of hybrid composites with ductile matrix and brittle fibers: Influence of temperature and constraint effect
Journal of Composite Materials, SAGE Publications
| [HAL] / [BIB] / [DOI] |
2018 |
John Susainathan, Florent Eyma, Emmanuel de Luycker, Arthur Cantarel, Bruno Castanié. Experimental investigation of impact behavior of wood-based sandwich structures
Composites Part A: Applied Science and Manufacturing, Elsevier, vol. 109, pp. 10-19
| [HAL] / [BIB] / [DOI] |
2018 |
Stéphane Guinard, Robin Bouclier, Mateus Toniolli, Jean-Charles Passieux. Multiscale analysis of complex aeronautical structures using robust non-intrusive coupling
Advanced Modeling and Simulation in Engineering Sciences, Springer, 5(1), p.1
| [HAL] / [BIB] / [DOI] |
2018 |
Pierre-Marie Nigay, Ange Nzihou, Thierry Cutard. The impact of the particle size distribution of organic additives on the microstructure of a clay ceramic and its thermal and mechanical properties
Journal of Materials in Civil Engineering, American Society of Civil Engineers, 30(4), p.04018044
| [HAL] / [BIB] / [DOI] |
2018 |
Hiroaki Matsumoto, Takuro Nishihara, Vincent Velay, Vanessa Vidal. Superplastic Property of the Ti-6Al-4V Alloy with Ultrafine-Grained Heterogeneous Microstructure
Advanced Engineering Materials, Wiley-VCH Verlag, 20(1), p.1700317
| [HAL] / [BIB] / [DOI] |
2018 |
J. Sweeney, P.E. Spencer, D. Vgenopoulos, M. Babenko, Florian Boutenel, P. Caton-Rose, P.D. P D Coates. Application of activated barrier hopping theory to viscoplastic modeling of glassy polymers
Mechanics of Time-Dependent Materials, Society for Experimental Mechanics, 22(2), p.145-165
| [HAL] / [BIB] / [DOI] |
2018 |
F. Bourdin, J.C. Stinville, M.P. Echlin, P.G. Callahan, W.C. Lenthe, C.J. Torbet, Damien Texier, F. Bridier, J. Cormier, P. Villechaise, T.M. Pollock, Valery Valle. Measurements of plastic localization by heaviside-digital image correlation
Acta Materialia, Elsevier, 157, p.307-325
| [HAL] / [BIB] / [DOI] |
2018 |
Joël Serra. Towards aging aircrafts extended life using Structural Health Monitoring
Aeroaging Weekly
| [HAL] / [BIB] |
2018 |
Céline Vicard, Olivier de Almeida, Arthur Cantarel, Gérard Bernhart. Diagramme TTT isotherme de la polymérisation anionique du PA6 à partir de l'epsilon-caprolactame
Revue des composites et des matériaux avancés = Journal of Composite and Advanced Materials, IIETA, 28(1), p.89-110
| [HAL] / [BIB] / [DOI] |
2018 |
Gian Luca Morini, Pamela Vocale, Marco Spiga, Stéphane Colin. Corrigendum to “Shear work contribution to convective heat transfer of dilute gases in slip flow regime”, [Eur. J. Mech. B Fluids 64 (2017) 60–68]
European Journal of Mechanics - B/Fluids, Elsevier, 72, p.467 - 470
| [HAL] / [BIB] / [DOI] |
2018 |
Jérôme Michetti, Adrian Basarab, Franck Diemer, Denis Kouamé. Comparison of an adaptive local thresholding method on CBCT and µCT endodontic images
Physics in Medicine and Biology, IOP Publishing, 63(1), p.015020
| [HAL] / [BIB] / [DOI] |
2018 |
Guillaume Androuin, Laurent Michel, Irène Maillet, Xiaojing Gong. Characterization of fatigue delamination growth under mode I and II: Effects of load ratio and load history
Engineering Fracture Mechanics, Elsevier, 203, p.172-185
| [HAL] / [BIB] / [DOI] |
2018 |
Thibaut Hirschler, Robin Bouclier, Arnaud Duval, Thomas Elguedj, Joseph Morlier. Isogeometric sizing and shape optimization of thin structures with a solid-shell approach
Structural and Multidisciplinary Optimization, Springer Verlag (Germany)
| [HAL] / [BIB] / [DOI] |
2018 |
Florian Mitjana, Sonia Cafieri, Florian Bugarin, Christian Gogu, Fabien Castanié. Optimization of structures under buckling constraints using frame elements
Engineering Optimization, Taylor & Francis, 51(1), p.140-159
| [HAL] / [BIB] / [DOI] |
2018 |
Raffaele D’elia, Gilles Dusserre, Sylvie del Confetto, Nicolas Eberling-Fux, Cédric Descamps, Thierry Cutard. Effect of dicumyl peroxide concentration on the polymerization kinetics of a polysilazane system
Polymer Engineering and Science, Wiley-Blackwell, 58(6), p.859-869
| [HAL] / [BIB] / [DOI] |
2018 |
Johanna Senatore, Frederic Monies, Walter Rubio, Laurent Tapie, Bernardin Mawussi. Analysis of the twist of ruled surfaces. Application to strip machining.
International Journal of Manufacturing Research, Inderscience, 13(1), p.26--48
| [HAL] / [BIB] / [DOI] |
2018 |
Matthieu Minty, Thibault Canceill, Sylvie Lê, Pauline Dubois, Oihana Amestoy, Pascale Loubières, Jeffrey E. Christensen, Camille Champion, Vincent Azalbert, Estelle Grasset, Sara Hardy, Jean-Michel Loubes, Jean-Philippe Mallet, François Tercé, Jean-Noel Vergnes, Remy Burcelin, Matteo Sérino, Franck Diemer, Vincent Blasco-Baque. Oral health and microbiota status in professional rugby players: A case-control study
Journal of Dentistry, Elsevier, 79, p.53-60
| [HAL] / [BIB] / [DOI] |
2018 |
Florian Boutenel, Myriam Delhomme, Vincent Velay, Romain Boman. Finite element modelling of cold drawing for high-precision tubes
Comptes Rendus Mécanique, Elsevier, 346(8), p.665-677
| [HAL] / [BIB] / [DOI] |
2018 |
Jamel Saoudi, Redouane Zitoune, Suhasini Gururaja, Mehdi Salem, Salah Mezleni. Analytical and experimental investigation of the delamination during drilling of composite structures with core drill made of diamond grits: X-ray tomography analysis
Journal of Composite Materials, SAGE Publications, 52(10), p.1281-1294
| [HAL] / [BIB] / [DOI] |
2018 |
Jean-Charles Passieux, Robin Bouclier, Jean-Noël Périé. A Space-Time PGD-DIC Algorithm
Application to 3D Mode Shapes Measurements
Experimental Mechanics, Society for Experimental Mechanics, 58(7), p.1195--1206
| [HAL] / [BIB] / [DOI] |
2018 |
Tahiana Ramananantoandro, Florent Eyma, Christophe Belloncle, Sébastien Rincé, Mark Irle. Effects of machining parameters on raised grain occurring after the application of water-based finishes
European Journal of Wood and Wood Products, Springer Verlag, 76(4), p.1323--1333
| [HAL] / [BIB] |
2017 |
Joël Serra, Christophe Bouvet, Bruno Castanié, Caroline Petiot. Experimental and numerical analysis of Carbon Fiber Reinforced Polymer notched coupons under tensile loading
Composite Structures, Elsevier, 181, p.145-157
| [HAL] / [BIB] / [DOI] |
2017 |
Pierre Planques, Vanessa Vidal, Philippe Lours, Vincent Proton, Fabrice Crabos, Julitte Huez, Bernard Viguier. Characterization of the mechanical properties of thermal barrier coatings by 3 points bending tests and modified small punch tests
Surface and Coatings Technology, Elsevier, 332, p.40-46
| [HAL] / [BIB] / [DOI] |
2017 |
Bassam Mahmoud, Marcos Torrecilla Colungo, Pablo Navarro, Steven Marguet, Issam Tawk, Jean-François Ferrero. Semi-continuous strategy for the modelling of damage mechanisms in unidirectional composites under low velocity impacts
Composites Part B: Engineering, Elsevier, 130, p.147 - 157
| [HAL] / [BIB] / [DOI] |
2017 |
Rémi Gilblas, Thierry Sentenac, Jean-José Orteu, Mickaël Sauvée, Guillaume Sierra, Florian Gacoin, Olivier Guillaumon. Detection of Micro-Cracks on Highly Specular Reflectors: Dimensioning a Vision Machine Based on Optical Properties
IEEE Sensors Journal, Institute of Electrical and Electronics Engineers, 17(23), p.7901 - 7907
| [HAL] / [BIB] / [DOI] |
2017 |
Yang Xu, Yann Landon, Stéphane Segonds, Yicha Zhang. A decision support model in mass customization
Computers & Industrial Engineering, Elsevier, 114, p.11-21
| [HAL] / [BIB] / [DOI] |
2017 |
Céline Vicard, Olivier de Almeida, Arthur Cantarel, Gérard Bernhart. Experimental study of polymerization and crystallization kinetics of polyamide 6 obtained by anionic ring opening polymerization of ε-caprolactam
Polymer, Elsevier, 132, p.88 - 97
| [HAL] / [BIB] / [DOI] |
2017 |
Damien L.Haridon, Laurent Chaudron, Anne Lise Marchand, Yves Gourinat. Teams Coping with Unknown Failures in Aerospace and Operational Environments
Aeronautics and Aerospace Open access Journal (AAOAJ), 1(4)
| [HAL] / [BIB] / [DOI] |
2017 |
M. Vellas, C. Fualdes, J. E. Morley, C. Dray, L. Rodriguez-Manas, A. Meyer, Laurent Michel, Y. Rolland, Yves Gourinat. Aeroaging — A new collaboration between life sciences experts and aerospace engineers
Journal of Nutrition, Health & Aging, Springer Verlag (Germany), 21(9), p.1024-1030
| [HAL] / [BIB] / [DOI] |
2017 |
van Hung Bui, Patrick Gilles, Tarek Sultan, Guillaume Cohen, Walter Rubio. A new cutting depth model with rapid calibration in abrasive water jet machining of titanium alloy
International Journal of Advanced Manufacturing Technology, Springer Verlag, 93(5-8), p.1499 - 1512
| [HAL] / [BIB] / [DOI] |
2017 |
Rami Hamdan, Jérôme Michetti, Claire Dionnet, Franck Diemer, Marie Georgelin-Gurgel. In-vitro evaluation of apical microleakage of two obturation methods of immature permanent teeth: orthograde apical plug of Mineral Trioxide Aggregate and root canal filling combining custom gutta-percha cone with Calcium Silicate-based sealer
GIORNALE ITALIANO DI ENDODONZIA, 31(2), p.89 - 95
| [HAL] / [BIB] / [DOI] |
2017 |
Mauricio Torres, Francis Collombet, Bernard Douchin, Laurent Crouzeix, Yves-Henri Grunevald. Assessments on the mechanical behaviour of a monolithic composite structure instrumented with a monitoring patch
Journal of Composite Materials, SAGE Publications, 51(26), p.3597--3610
| [HAL] / [BIB] / [DOI] |
2017 |
Benjamin Vales, Steven Marguet, Romain Créac'Hcadec, Laurent Sohier, Jean-François Ferrero, Pablo Navarro. Experimental & numerical study of the Tensile/Compression-Shear Arcan test under dynamic loading
International Journal of Adhesion and Adhesives, Elsevier, 78, p.135 - 147
| [HAL] / [BIB] / [DOI] |
2017 |
Yves Davila, Laurent Crouzeix, Bernard Douchin, Francis Collombet, Yves-Henri Grunevald. Spatial Evolution of the Thickness Variations over a CFRP Laminated Structure
Applied Composite Materials, Springer Verlag (Germany), 24(5), p.1201 - 1215
| [HAL] / [BIB] / [DOI] |
2017 |
Yanfeng Gao, Pascale Magaud, Lucien Baldas, Christine Lafforgue, Micheline Abbas, Stéphane Colin. Self-ordered particle trains in inertial microchannel flows
Microfluidics and Nanofluidics, Springer Verlag, 21(10), p.154
| [HAL] / [BIB] / [DOI] |
2017 |
Marcio Wagner Batista dos Santos, Vincent Velay, Vanessa Vidal, Gérard Bernhart, Gilmar Ferreira Batalha, Hiroaki Matsumoto. Mechanical behavior of a Ti-6Al-4 V titanium alloy with microstructural evolution modeling under hot and superplastic conditions. Mechanisches Verhalten einer Ti-6Al-4?V-Titanlegierung mit mikrostruktureller Evolutionsmodellierung unter warmen und superplastischen Bedingungen
Materials Science and Engineering Technology / Materialwissenschaft und Werkstofftechnik, Wiley-VCH Verlag, 48(10), p.952-961
| [HAL] / [BIB] / [DOI] |
2017 |
Ion Hazyuk, Marc Budinger, Florian Sanchez, Christian Gogu. Optimal design of computer experiments for surrogate models with dimensionless variables
Structural and Multidisciplinary Optimization, Springer Verlag (Germany), 56(3), p.663 - 679
| [HAL] / [BIB] / [DOI] |
2017 |
Pierre Planques, Vanessa Vidal, Philippe Lours, Vincent Proton, Fabrice Crabos, Julitte Huez, Bernard Viguier. Mechanical and thermo-physical properties of plasma-sprayed thermal barrier coatings: a literature survey
Oxidation of Metals, Springer Verlag, vol. 88(n° 1-2), p.133-143
| [HAL] / [BIB] / [DOI] |
2017 |
Jia Huang, Marie-Laetitia Pastor, Christian Garnier, Xiaojing Gong. Rapid evaluation of fatigue limit on thermographic data analysis
International Journal of Fatigue, Elsevier, 104, p.293-301
| [HAL] / [BIB] / [DOI] |
2017 |
Robin Bouclier, Jean-Charles Passieux. A domain coupling method for finite element digital image correlation with mechanical regularization: Application to multiscale measurements and parallel computing
International Journal for Numerical Methods in Engineering, Wiley, 111(2), p.123 - 143
| [HAL] / [BIB] / [DOI] |
2017 |
Aurélien Fabas, Aurélie Rouaix-Vande Put, Sébastien Doublet, Didier Domergue, Mehdi Salem, Daniel Monceau. Metal dusting corrosion of austenitic alloys at low and high pressure with the effects of Cr, Al, Nb and Cu
Corrosion Science, Elsevier, 123, p. 310-318
| [HAL] / [BIB] / [DOI] |
2017 |
Arjan J.H. Frijns, Dimitris Valougeorgis, Stéphane Colin. Editorial for the special issue on non-equilibrium gas flows
European Journal of Mechanics - B/Fluids, Elsevier, 64, p.1
| [HAL] / [BIB] / [DOI] |
2017 |
Pamela Vocale, Gian Luca Morini, Marco Spiga, Stéphane Colin. Shear work contribution to convective heat transfer of dilute gases in slip flow regime
European Journal of Mechanics - B/Fluids, Elsevier, 64, p.60 - 68
| [HAL] / [BIB] / [DOI] |
2017 |
Victor Achard, Alain Daidié, Manuel Paredes, Clément Chirol. Optimization of the Cold Expansion Process for Titanium Holes
Advanced Engineering Materials, Wiley-VCH Verlag, 19(6), p.1500626 1-13
| [HAL] / [BIB] / [DOI] |
2017 |
Hiroaki Matsumoto, Vincent Velay. Mesoscale modeling of dynamic recrystallization behavior, grain size evolution, dislocation density, processing map characteristic, and room temperature strength of Ti-6Al-4V alloy forged in the (α+β) region
Journal of Alloys and Compounds, Elsevier, 708, p.404 - 413
| [HAL] / [BIB] / [DOI] |
2017 |
Yiwei Wang, Christian Gogu, Nicolas Binaud, Christian Bes, Raphael T. Haftka, Nam H. Kim. A cost driven predictive maintenance policy for structural airframe maintenance
Chinese Journal of Aeronautics, Elsevier, 30(3), p.1242--1257
| [HAL] / [BIB] / [DOI] |
2017 |
Hacene Si Hadj Mohand, Aldo Frezzotti, Juergen Brandner, Christine Barrot, Stéphane Colin. Molecular tagging velocimetry by direct phosphorescence in gas microflows: Correction of Taylor dispersion
Experimental Thermal and Fluid Science, Elsevier, 83, p.177 - 190
| [HAL] / [BIB] / [DOI] |
2017 |
G. Tatsios, G. Lopez Quesada, Marcos Rojas-Cárdenas, Lucien Baldas, Stéphane Colin, D. Valougeorgis. Computational investigation and parametrization of the pumping effect in temperature-driven flows through long tapered channels
Microfluidics and Nanofluidics, Springer Verlag, 21(5), p.99
| [HAL] / [BIB] / [DOI] |
2017 |
Frederic Monies, Isabelle Danis, Christian Bes, Sonia Cafieri, Marcel Mongeau. A new machining strategy for roughing deep pockets of magnesium-rare earth alloys
International Journal of Advanced Manufacturing Technology, Springer Verlag, 92, p.3883-3901
| [HAL] / [BIB] / [DOI] |
2017 |
N. Dubary, G. Taconet, Christophe Bouvet, Benoît Vieille. Influence of temperature on the impact behavior and damage tolerance of hybrid woven-ply thermoplastic laminates for aeronautical applications
Composite Structures, Elsevier, 168, p.663 - 674
| [HAL] / [BIB] / [DOI] |
2017 |
Akshay Hejjaji, Redouane Zitoune, Laurent Crouzeix, Sabine Le Roux, Francis Collombet. Surface and machining induced damage characterization of abrasive water jet milled carbon/epoxy composite specimens and their impact on tensile behavior
Wear, Elsevier, 376-377(Part B), p. 1356-1364
| [HAL] / [BIB] / [DOI] |
2017 |
Catherine Pons Lelardeux, David Panzoli, Vincent Lubrano, Vincent Minville, Pierre Lagarrigue, Jean-Pierre Jessel. Communication system and team situation awareness in a multiplayer real-time learning environment: application to a virtual operating room
The Visual Computer, Springer Verlag, 33(4), p.489-515
| [HAL] / [BIB] / [DOI] |
2017 |
Michel Bornert, Pascal Doumalin, Jean-Christophe Dupré, Christophe Poilâne, Laurent Robert, Evelyne Toussaint, Bertrand Wattrisse. Shortcut in DIC error assessment induced by image interpolation used for subpixel shifting
Optics and Lasers in Engineering, Elsevier, 91, p.124-133
| [HAL] / [BIB] / [DOI] |
2017 |
Christophe Rouzaud, Fabrice Gatuingt, Guillaume Hervé, Olivier Dorival. A new multi-frequency approach based on Padé approximants for the treatment of transient dynamics problems with the variational theory of complex rays
Journal of Sound and Vibration, Elsevier, 392, p.170-186
| [HAL] / [BIB] / [DOI] |
2017 |
Kejian Li, Gabriel Spartacus, Jiling Dong, Pengjun Cao, Keesam Shin. Effect of ultrasonic shot peening on microstructure and properties of 301SS
Materials and Manufacturing Processes, Taylor & Francis, 32(16), p.1851-1855
| [HAL] / [BIB] / [DOI] |
2017 |
Tao Li, Etienne Gourc, Sébastien Seguy, Alain Berlioz. Dynamics of two vibro-impact nonlinear energy sinks in parallel under periodic and transient excitations
International Journal of Non-Linear Mechanics, Elsevier, 90, p.100-110
| [HAL] / [BIB] / [DOI] |
2017 |
Francois Louf, Sami Daouk, Christophe Cluzel, Olivier Dorival, Laurent Champaney, Sylvie Audebert. Study of the dynamic behavior of a bolted joint under heavy loadings
Journal of Sound and Vibration, Elsevier, 392, p.307 - 324
| [HAL] / [BIB] / [DOI] |
2017 |
Jian Fu, Jean-Charles Maré, Yongling Fu. Modelling and simulation of flight control electromechanical actuators with special focus on model architecting, multidisciplinary effects and power flows
Chinese Journal of Aeronautics, Elsevier, 30(1), p.47-65
| [HAL] / [BIB] / [DOI] |
2017 |
Teddy Lisle, Marie-Laetitia Pastor, Christophe Bouvet, Philippe Marguerès. Damage of woven composite under translaminar cracking tests using infrared thermography
Composite Structures, Elsevier, vol. 161, pp. 275-286
| [HAL] / [BIB] / [DOI] |
2017 |
Cyril Sola, Bruno Castanié, Laurent Michel, Frederic Lachaud, Arnaud Delabie, Emmanuel Mermoz. Bearing fatigue of composite laminates: Damage monitoring and fatigue life prediction
Composites Part B: Engineering, Elsevier, 110, p.487-496
| [HAL] / [BIB] / [DOI] |
2017 |
M. S. Bin Mohamed Rehan,, Jérôme Rousseau, Stéphane Fontaine, Xiaojing Gong. Experimental study of the influence of ply orientation on DCB mode-I delamination behavior by using multidirectional fully isotropic carbon/epoxy laminates
Composite Structures, Elsevier, 161, p.1-7
| [HAL] / [BIB] / [DOI] |
2017 |
Pierre-Marie Nigay, Thierry Cutard, Ange Nzihou. The impact of heat treatment on the microstructure of a clay ceramic and its thermal and mechanical properties
Ceramics International, Elsevier, 43(2), p.1747-1754
| [HAL] / [BIB] / [DOI] |
2017 |
Moindze Soilahoudine, Christian Gogu, Christian Bes. Accelerated Adaptive Surrogate-Based Optimization Through Reduced-Order Modeling
AIAA Journal, American Institute of Aeronautics and Astronautics, 55(5), p.1681--1694
| [HAL] / [BIB] / [DOI] |
2017 |
I Alhossen, Christina Villeneuve-Faure, Fulbert Baudoin, Florian Bugarin, Stéphane Segonds. Sensitivity analysis of the electrostatic force distance curve using Sobol’s method and design of experiments
Journal of Physics D: Applied Physics, IOP Publishing, 50(3)
| [HAL] / [BIB] / [DOI] |
2017 |
Giuseppe Pennisi, Cyrille Stephan, Etienne Gourc, Guilhem Michon. Experimental investigation and analytical description of a vibro-impact NES coupled to a single-degree-of-freedom linear oscillator harmonically forced
Nonlinear Dynamics, Springer Verlag, 88(3), p.1769 - 1784
| [HAL] / [BIB] / [DOI] |
2017 |
Naomi Murdoch, Iris Avila Martinez, Cecily Sunday, Emmanuel Zenou, Olivier Cherrier, Alexandre Cadu, Yves Gourinat. An experimental study of low-velocity impacts into granular material in reduced gravity
Monthly Notices of the Royal Astronomical Society, Oxford University Press (OUP): Policy P - Oxford Open Option A, vol. 468(n° 2), pp. 1259-1272
| [HAL] / [BIB] / [DOI] |
2017 |
M. F. Ameur, Malek Habak, M. Kenane, H. Aouici, Mohammed Cheikh. Machinability analysis of dry drilling of carbon/epoxy composites: cases of exit delamination and cylindricity error
International Journal of Advanced Manufacturing Technology, Springer Verlag, 88(9), p.2557-2571
| [HAL] / [BIB] / [DOI] |
2017 |
Fenglin Liang, Martial Sauceau, Gilles Dusserre, Patricia Arlabosse. A uniaxial cyclic compression method for characterizing the rheological and textural behaviors of mechanically dewatered sewage sludge
Water Research, IWA Publishing/Elsevier, 113, p.171-180
| [HAL] / [BIB] / [DOI] |
2017 |
Marcos Rojas-Cárdenas, Ernane Silva, Minh-Tuan Ho, César Deschamps, Irina Martin Graur. Time-dependent methodology for non-stationary mass flow rate measurements in a long micro-tube
Microfluidics and Nanofluidics, Springer Verlag, 21(5), p.86
| [HAL] / [BIB] / [DOI] |
2017 |
Imen Yahyaoui, Marianne Perrin, Xiaojing Gong, H. Li. Damage evolution in wood under tensile loading monitored by acoustic emission
TAMAP Journal of engineering, 2017(article ID15), p.2602--2362
| [HAL] / [BIB] |
2017 |
Igor Jovančević, Huy-Hieu Pham, Jean-José Orteu, Rémi Gilblas, Jacques Harvent, Xavier Maurice, Ludovic Brèthes. Détection et caractérisation de défauts de surface par analyse des nuages de points 3D fournis par un scanner
Instrumentation, Mesure, Métrologie, Lavoisier, 16(1-4), p.261-282
| [HAL] / [BIB] |
2017 |
Jean-Charles Maré, Jian Fu. Review on signal-by-wire and power-by-wire actuation for more electric aircraft
Chinese Journal of Aeronautics, Elsevier, 30(3), p.857--870
| [HAL] / [BIB] / [DOI] |
2017 |
Hannah Lois Dorothy, Patrice Longère. Modelling of high strain rate adiabatic shear banding induced failure: A comparison of two approaches
International Journal of Impact Engineering, 110, p.219--227
| [HAL] / [BIB] / [DOI] |
2017 |
Floran Barelli, Vincent Wagner, Raynald Laheurte, Gilles Dessein, Philippe Darnis, Olivier Cahuc, Michel Mousseigne. Orthogonal cutting of TA6V alloys with chamfered tools: Analysis of tool\textendashchip contact lengths
Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture, SAGE Publications, 231(13), p.2384--2395
| [HAL] / [BIB] |
2017 |
Pierre-Marie Nigay, Rababe Sani, Thierry Cutard, Ange Nzihou. Modeling of the thermal and mechanical properties of clay ceramics incorporating organic additives
Materials Science and Engineering: A, Elsevier, 708, p.375-382
| [HAL] / [BIB] / [DOI] |
2017 |
Yiwei Wang, Christian Gogu, Nam H. Kim, Raphael T. Haftka, Nicolas Binaud, Christian Bes. Noise-dependent ranking of prognostics algorithms based on discrepancy without true damage information
Reliability Engineering and System Safety, Elsevier
| [HAL] / [BIB] |
2017 |
M. Fiorina, A. Seman, Bruno Castanié, K. M. Ali, C. Schwob, L. Mezeix. Spring-in prediction for carbon/epoxy aerospace composite structure
Composite Structures, Elsevier, 168, p.739--745
| [HAL] / [BIB] |
2017 |
Yankuan Liu, Yinghui Liu, Philippe Lours, Thierry Sentenac, Vanessa Vidal, Zhiping Wang, Kunying Ding. Influence of isothermal aging conditions on APS TBC's interfacial fracture toughness
Surface and Coatings Technology, Elsevier, 313, p.417-424
| [HAL] / [BIB] / [DOI] |
2017 |
Rami Hamdan, Jérôme Michetti, Deborah Pinchon, Franck Diemer, Marie Georgelin-Gurgel. The XP-Endo Finisher for the removal of calcium hydroxide paste from root canals and from the apical third
Journal of Clinical and Experimental Dentistry, 9, p.0 - 0
| [HAL] / [BIB] / [DOI] |
2017 |
Imen Ksouri, Olivier de Almeida, Nader Haddar. Long term ageing of polyamide 6 and polyamide 6 reinforced with 30% of glass fibers: physicochemical, mechanical and morphological characterization
Journal of Polymer Research, Springer Verlag, 24(8), p.133
| [HAL] / [BIB] / [DOI] |
2017 |
Joël Serra, Jean-Emmanuel Pierré, Jean-Charles Passieux, Jean-Noël Périé, Christophe Bouvet, Bruno Castanié. Validation and modeling of aeronautical composite structures subjected to combined loadings: The VERTEX project. Part 1: Experimental setup, FE-DIC instrumentation and procedures
Composite Structures, Elsevier, 179, p.224-244
| [HAL] / [BIB] / [DOI] |
2017 |
Sonia Braiek, Redouane Zitoune, Ated Ben Khalifa, Mondher Zidi. Experimental and numerical study of adhesively bonded\textpm55° filament wound tubular specimens under uniaxial tensile loading
Composite Structures, Elsevier, 172, p.297--310
| [HAL] / [BIB] |
2017 |
Eric Paroissien, Frederic Lachaud, Sébastien Schwartz, Anthony da Veiga, Patrick Barrière. Simplified stress analysis of hybrid (bolted/bonded) joints
International Journal of Adhesion and Adhesives, Elsevier, 77, p.183-197
| [HAL] / [BIB] / [DOI] |
2017 |
Michel Galaup, Catherine Pons Lelardeux, Pierre Lagarrigue. De l’analyse du travail à un learning game pour la formation.
Éducation permanente, Arcueil : Éducation permanente, Le Cnam, N° HS9 2017-1, p.157-164
| [HAL] / [BIB] |
2017 |
Vincent Wagner, Floran Barelli, Gilles Dessein, Raynald Laheurte, Philippe Darnis, Olivier Cahuc, Michel Mousseigne. Comparison of the chip formations during turning of Ti64 β and Ti64 α+β
Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture, SAGE Publications, p.0954405417728309
| [HAL] / [BIB] |
2017 |
Redouane Zitoune, Nicolas Cadorin, Francis Collombet, Michal Š'Ima. Temperature and wear analysis in function of the cutting tool coating when drilling of composite structure: In situ measurement by optical fiber
Wear, Elsevier, 376-377, p.1849--1858
| [HAL] / [BIB] |
2017 |
Mahmoud Harzallah, Thomas Pottier, Johanna Senatore, Michel Mousseigne, Guénaël Germain, Yann Landon. Numerical and experimental investigations of Ti-6Al-4V chip generation and thermo-mechanical couplings in orthogonal cutting
International Journal of Mechanical Sciences, Elsevier, 134, p.189-202
| [HAL] / [BIB] / [DOI] |
2017 |
Stéphane Segonds, Philippe Seitier, Cyril Bordreuil, Florian Bugarin, Walter Rubio, Jean-Max Redonnet. An analytical model taking feed rate effect into consideration for scallop height calculation in milling with torus-end cutter
Journal of Intelligent Manufacturing, Springer Verlag (Germany)
| [HAL] / [BIB] / [DOI] |
2017 |
Mathieu Fogel, Patricia Parlevliet, Philippe Olivier, Eric Dantras. Manufacturing of conductive structural composites through spraying of CNTs/epoxy dispersions on dry carbon fiber plies
Composites Part A: Applied Science and Manufacturing, Elsevier, vol. 100, pp. 40-47
| [HAL] / [BIB] / [DOI] |
2017 |
Florian Sanchez, Marc Budinger, Ion Hazyuk. Dimensional analysis and surrogate models for the thermal modeling of Multiphysics systems
Applied Thermal Engineering, Elsevier, 110(3), p.758-771
| [HAL] / [BIB] / [DOI] |
2017 |
Ankit Chiplunkar, Emmanuel Rachelson, Michele Colombo, Joseph Morlier. Approximate inference in related multi-output Gaussian Process Regression
Lecture Notes in Computer Science, Springer, p.88-103
| [HAL] / [BIB] / [DOI] |
2017 |
Etienne Copin, X. Massol, Stéphane Amiel, Thierry Sentenac, Yannick Le Maoult, Philippe Lours. Novel erbia-yttria co-doped zirconia fluorescent thermal history sensor
Smart Materials and Structures, IOP Publishing, 26(1), art. 015001-11 p.
| [HAL] / [BIB] / [DOI] |
2017 |
Jean-Emmanuel Pierré, Jean-Charles Passieux, Jean-Noël Périé. Finite Element Stereo Digital Image Correlation: Framework and Mechanical Regularization
Experimental Mechanics, Society for Experimental Mechanics, 57(3), p.443-456
| [HAL] / [BIB] / [DOI] |
2017 |
Catherine Pons Lelardeux, Michel Galaup, David Panzoli, P. Gilles, J. Minguella-Canela, Nadia Yassine-Diab, Pierre Lagarrigue. Improving mechanical engineering vocabulary through the use of a game
Procedia Manufacturing, Elsevier, 13, p.1432-1439
| [HAL] / [BIB] / [DOI] |
2017 |
M.-Q. Thai, Fabrice Schmidt, Gilles Dusserre, Arthur Cantarel, L. Silva. BEM computation of 3D Stokes flow including moving front
International Journal of Material Forming, Springer Verlag, 10(4), p.567-580
| [HAL] / [BIB] / [DOI] |
2017 |
Robin Bouclier, Jean-Charles Passieux, Michel Salaün. Development of a new, more regular, mortar method for the coupling of NURBS subdomains within a NURBS patch: Application to a non-intrusive local enrichment of NURBS patches
Computer Methods in Applied Mechanics and Engineering, Elsevier, 316, p.123-150
| [HAL] / [BIB] / [DOI] |
2017 |
Arnaud Wilhelm, Samuel Rivallant, Jean-François Ferrero. Study of the deformation of a sandwich shield subjected to bird impact: A behaviour analysis tool using vector decomposition
Journal of Sandwich Structures and Materials, SAGE Publications, p.1099636217697499
| [HAL] / [BIB] |
2017 |
Camille Bessaguet, Eric Dantras, Colette Lacabanne, Mathieu Chevalier, Guilhem Michon. Piezoelectric and mechanical behavior of NaNbO3/PEKK lead-free nanocomposites
Journal of Non-Crystalline Solids, Elsevier, 459, p.83-87
| [HAL] / [BIB] / [DOI] |
2017 |
Juan Loukota, Jean-Charles Passieux, Albert Lucchetti, Guilhem Michon. Modeling of Nonstructural Components in the Dynamic Behavior of Aeronautical Structures
Journal of Aircraft, American Institute of Aeronautics and Astronautics, 54(1), p.85-93
| [HAL] / [BIB] / [DOI] |
2017 |
Vincent Wagner, Floran Barelli, Gilles Dessein, Raynald Laheurte, Phillipe Darnis, Olivier Cahuc, Michel Mousseigne. Thermal and microstructure study of the chip formation during turning of Ti64 β lamellar titanium Structure
Journal of Manufacturing Science and Engineering, American Society of Mechanical Engineers, 140(3), p.031010
| [HAL] / [BIB] / [DOI] |
2017 |
P. Rahme, Yann Landon, Frederic Lachaud, Robert Piquet, Pierre Lagarrigue. Drilling of thick composite materials using a step gundrill
Composites Part A: Applied Science and Manufacturing, Elsevier, 103, p.304--313
| [HAL] / [BIB] |
2017 |
Oleksii Shtehin, Vincent Wagner, Sébastien Seguy, Yann Landon, Gilles Dessein, Michel Mousseigne. Stability of ball-end milling on warped surface: semi-analytical and experimental analysis
International Journal of Advanced Manufacturing Technology, Springer Verlag, 89(9-12), p.2557-2569
| [HAL] / [BIB] / [DOI] |
2017 |
John Susainathan, Florent Eyma, Emmanuel de Luycker, Arthur Cantarel, Bruno Castanié. Manufacturing and quasi-static bending behavior of wood-based sandwich structures.
Composite Structures, Elsevier, 182, p.487-504
| [HAL] / [BIB] / [DOI] |
2017 |
Frederic Monies, Isabelle Danis, Pierre Lagarrigue, Patrick Gilles, Walter Rubio. Balancing of the transversal cutting force for pocket milling cutters: application for roughing a magnesium-rare earth alloy
International Journal of Advanced Manufacturing Technology, Springer Verlag, 89(1), p.45--64
| [HAL] / [BIB] |
2017 |
Miora Falimiarana Ramanakoto, Anjy Nandrianina Andrianantenaina, Tahiana Ramananantoandro, Florent Eyma. Visual and visuo-tactile preferences of Malagasy consumers for machined wood surfaces for furniture: acceptability thresholds for surface parameters
European Journal of Wood and Wood Products, Springer Verlag, 75(5), p.825--837
| [HAL] / [BIB] |
2017 |
Florentin Berthet, Frederic Lachaud, Jérémy Crevel, Marie-Laetitia Pastor. Behaviour and damage of injected carbon-fibre-reinforced polyether ether ketone: From process to modelling
Journal of Composite Materials, SAGE Publications, 51(2), p. 141-151
| [HAL] / [BIB] / [DOI] |
2017 |
Tao Li, Sébastien Seguy, Alain Berlioz. Optimization mechanism of targeted energy transfer with vibro-impact energy sink under periodic and transient excitation
Nonlinear Dynamics, Springer Verlag, 87(4), p.2415-2433
| [HAL] / [BIB] / [DOI] |
2017 |
Matthias Barus, Hélène Welemane, Francis Collombet, Marie-Laetitia Pastor, Arthur Cantarel, Laurent Crouzeix, Yves-Henri Grunevald, Valérie Nassiet. Bonded repair issues for composites: An investigation approach based on infrared thermography
NDT & E International, Elsevier, 85, p.27-33
| [HAL] / [BIB] / [DOI] |
2017 |
Michel Galaup, Nicolas Muller, Catherine Pons Lelardeux, David Panzoli, Jean Pierre Jessel, Pierre Lagarrigue. Design of learning environments for Mechanical Engineering
Procedia Manufacturing, Elsevier, 13, p.1440 - 1446
| [HAL] / [BIB] / [DOI] |
2017 |
Tao Li, Donghai Qiu, Sébastien Seguy, Alain Berlioz. Activation characteristic of a vibro-impact energy sink and its application to chatter control in turning
Journal of Sound and Vibration, Elsevier, 405, p.1-18
| [HAL] / [BIB] / [DOI] |
2017 |
Igor Jovančević, Huy-Hieu Pham, Jean-José Orteu, Rémi Gilblas, Jacques Harvent, Xavier Maurice, Ludovic Brèthes. 3D Point Cloud Analysis for Detection and Characterization of Defects on Airplane Exterior Surface
Journal of Nondestructive Evaluation, Springer Verlag, 36(4), p.74
| [HAL] / [BIB] / [DOI] |
2017 |
Marie Adou-Assoumou, Aline A Krah-Sinan, Yolande Koffi-Gnagne, K Bane, B Faye, Franck Diemer. Protocol for Root Canals' Irrigation in Endodontic Practice in Ivory Coast: A Survey of 100 Dentists
Journal of Dentistry and Oral Care Medicine, 3, p.303 - 303
| [HAL] / [BIB] |
2017 |
Tao Li, Sébastien Seguy, Alain Berlioz. On the dynamics around targeted energy transfer for vibro-impact nonlinear energy sink
Nonlinear Dynamics, Springer Verlag, 87(3), p.1453-1466
| [HAL] / [BIB] / [DOI] |
2017 |
Joël Serra, Jean-Emmanuel Pierré, Jean-Charles Passieux, Jean-Noël Périé, Christophe Bouvet, Bruno Castanié, Caroline Petiot. Validation and modeling of aeronautical composite structures subjected to combined loadings: The VERTEX project. Part 2: Load envelopes for the assessment of panels with large notches
Composite Structures, Elsevier, 180, p.550-567
| [HAL] / [BIB] / [DOI] |
2017 |
R. Julien, Vincent Velay, Vanessa Vidal, Y. Dahan, R. Forestier, Farhad Rezai-Aria. Tensile behaviour of high temperature forged Ti-6Al-4V during in-situ heat treatments
Materials Letters, Elsevier, 208, p. 7-9
| [HAL] / [BIB] / [DOI] |
2017 |
Jacques Poirier, Eric Blond, Emmanuel de Bilbao, Rudy Michel, Antoine Coulon, Jean Gillibert, Michel Boussuge, Yang Zhang, David Ryckelynck, Gilles Dusserre, Thierry Cutard, Paul Leplay. New advances in the laboratory characterization of refractories : testing and modelling
Metallurgical Research & Technology, EDP Sciences, 114(6), art. 610 - 16 p.
| [HAL] / [BIB] / [DOI] |
2016 |
Vincent Velay, Abderrahim Michrafy. An analytical model for the prediction of hot roll temperatures in a hot rolling process
Materials Science and Engineering Technology / Materialwissenschaft und Werkstofftechnik, Wiley-VCH Verlag, 47(12), p. 1202-1215
| [HAL] / [BIB] / [DOI] |
2016 |
Cédric Pozzolini, Yves Renard, Michel Salaün. Energy conservative finite element semi-discretization for vibro-impacts of plates on rigid obstacles
ESAIM: Mathematical Modelling and Numerical Analysis, EDP Sciences, vol. 50(n° 6), pp. 1585-1613
| [HAL] / [BIB] / [DOI] |
2016 |
Fabien Destic, Christophe Bouvet. Impact damages detection on composite materials by THz imaging
Case Studies in Nondestructive Testing and Evaluation, 6, p.53-62
| [HAL] / [BIB] / [DOI] |
2016 |
Alexia Vinel, Aline Sinan, Melanie Dedieu, Sara Laurencin Dalicieux, Franck Diemer, Marie Georgelin-Gurgel. Effect of apical preparation on different needle depth penetration
GIORNALE ITALIANO DI ENDODONZIA, 30(2), p.96 - 100
| [HAL] / [BIB] / [DOI] |
2016 |
Michel Galaup, Catherine Pons Lelardeux, Pierre Lagarrigue. A learning game at the crossroads of institutions partners. Un learning game au carrefour des institutions partenaires : Mecagenius®
RDST - Recherches en didactique des sciences et des technologies, ENS Éditions, p.51 - 69
| [HAL] / [BIB] / [DOI] |
2016 |
Benjamin Ostré, Christophe Bouvet, Clément Minot, Jacky Aboissière. Finite Element analysis of CFRP laminates subjected to compression after edge impact
Composite Structures, Elsevier, vol. 153, pp. 478-489
| [HAL] / [BIB] / [DOI] |
2016 |
L. V. Korah, Pierre-Marie Nigay, Thierry Cutard, Ange Nzihou, S. Thomas. The impact of the particle shape of organic additives on the anisotropy of a clay ceramic and its thermal and mechanical properties
Construction and Building Materials, Elsevier, 125, p. 654-660
| [HAL] / [BIB] / [DOI] |
2016 |
Sonia Sassi, Philippe Marguerès, Rébecca Le Begue, Mahamadou Mounkaila, Philippe Olivier, Thierry Camps. Détermination des paramètres géométriques pour la caractérisation électrique d’un composite T700/M21 en cours de cuisson
Matériaux & Techniques, EDP Sciences, 104(4), p.411
| [HAL] / [BIB] / [DOI] |
2016 |
Ahmed Zouaghi, Vincent Velay, Adriana Soveja, Thomas Pottier, Mohammed Cheikh, Farhad Rezai-Aria. A multi-scale approach to investigate the non linear subsurface behavior and strain localization of X38CrMoV5-1 martensitic tool steel: experiment and numerical analysis
International Journal of Plasticity, Elsevier, 87, p.130-153
| [HAL] / [BIB] / [DOI] |
2016 |
Abdelhamid Maali, Stéphane Colin, Bharat Bhushan. Slip length measurement of gas flow
Nanotechnology, Institute of Physics, 27(37), p.374004
| [HAL] / [BIB] / [DOI] |
2016 |
Mathieu Marty, Emmanuelle Noirrit-Esclassan, Franck Diemer. Arsenic trioxide-induced osteo-necrosis treatment in a child: mini- review and case report
European archives of paediatric dentistry : official journal of the European Academy of Paediatric Dentistry, Springer, 17(5), p.419-422
| [HAL] / [BIB] / [DOI] |
2016 |
Raffaele D'Elia, Gérard Bernhart, Jouke Hijlkema, Thierry Cutard. Experimental analysis of SiC-based refractory concrete in hybrid rocket nozzles
Acta Astronautica, Elsevier, 126(SI), p. 168-177
| [HAL] / [BIB] / [DOI] |
2016 |
Hakim Abdulhamid, Christophe Bouvet, Laurent Michel, Jacky Aboissière, Clément Minot. Numerical simulation of impact and compression after impact of asymmetrically tapered laminated CFRP
International Journal of Impact Engineering, Elsevier, vol. 95, pp. 154-164
| [HAL] / [BIB] / [DOI] |
2016 |
S Dubreuil, N Bartoli, Christian Gogu, T Lefebvre. Propagation of modeling uncertainty by polynomial chaos expansion in multidisciplinary analysis
Journal of Mechanical Design, American Society of Mechanical Engineers
| [HAL] / [BIB] / [DOI] |
2016 |
Folly Abevi, Alain Daidié, Michel Chaussumier, Stéphane Orieux. Static Analysis of an Inverted Planetary Roller Screw Mechanism
Journal of Mechanisms and Robotics, American Society of Mechanical Engineers, 8(4), p.041020 1-14
| [HAL] / [BIB] / [DOI] |
2016 |
Cecily Sunday, Naomi Murdoch, Olivier Cherrier, Sara Morales Serrano, Claudia Valeria Nardi, Tristan Janin, Iris Avila Martinez, Yves Gourinat, David Mimoun. A novel facility for reduced-gravity testing: A setup for studying low-velocity collisions into granular surfaces
Review of Scientific Instruments, American Institute of Physics, 87(8), p.084504
| [HAL] / [BIB] / [DOI] |
2016 |
Ahmed Ktari, Nader Haddar, Farhad Rezai-Aria, Hassine Ferid Ayedi. On the assessment of train crankshafts fatigue life based on LCF tests and 2D-FE evaluation of J-integral
Engineering Failure Analysis, Elsevier, 66, p.354-364
| [HAL] / [BIB] / [DOI] |
2016 |
Gilles Dusserre, Olivier Valentin, Fabien Nazaret, Thierry Cutard. Experimental and numerical investigation of the asymmetric primary creep of a fibre reinforced refractory concrete at 1200 degrees C
Journal of the European Ceramic Society, Elsevier, 36(10), p. 2627-2639
| [HAL] / [BIB] / [DOI] |
2016 |
Hakim Abdulhamid, Christophe Bouvet, Laurent Michel, Jacky Aboissière, Clément Minot. Experimental study of compression after impact of asymmetrically tapered composite laminate
Composite Structures, Elsevier, vol. 149, pp. 292-303
| [HAL] / [BIB] / [DOI] |
2016 |
Mohammed-Yassine Nagazi, Giovanni Brambilla, Gérard Meunier, Philippe Marguerès, Jean-Noël Périé, Luca Cipelletti. Space-resolved diffusing wave spectroscopy measurements of the macroscopic deformation and the microscopic dynamics in tensile strain tests
Optics and Lasers in Engineering, Elsevier, 88, p.5 - 12
| [HAL] / [BIB] / [DOI] |
2016 |
Joël Serra, Christophe Bouvet, Bruno Castanié, Caroline Petiot. Scaling effect in notched composites: The Discrete Ply Model approach
Composite Structures, Elsevier, 148, p.127-143
| [HAL] / [BIB] / [DOI] |
2016 |
Andre Chateau Akue Asseko, Benoît Cosson, Eric Lafranche, Fabrice Schmidt, Yannick Le Maoult. Effect of the developed temperature field on the molecular interdiffusion at the interface in infrared welding of polycarbonate composites
Composites Part B: Engineering, Elsevier, 97, p. 53-61
| [HAL] / [BIB] / [DOI] |
2016 |
C Rouzaud, Fabrice Gatuingt, G Hervé, Olivier Dorival, Nadim Moussallam. Application Of The Variational Theory Of Complex Rays To The Determination Of Shock Induced Vibration Of A Rc Structure
International Journal of Safety and Security Engineering, WIT Press, 6(2), p.427-437
| [HAL] / [BIB] / [DOI] |
2016 |
Ernane Silva, Marcos Rojas-Cárdenas, Cesar Deschamps. Experimental analysis of velocity slip at the wall for gas flows of nitrogen, R134a, and R600a through a metallic microtube
International Journal of Refrigeration, Elsevier, 66, p.121 - 132
| [HAL] / [BIB] / [DOI] |
2016 |
Loïc Bernard, Guilhem Michon, Rached El Fatmi, Bruno Castanié. Static and dynamic analysis of bending–torsion coupling of a CFRP sandwich beam
Composite Structures, Elsevier, 145, p.26 - 36
| [HAL] / [BIB] / [DOI] |
2016 |
Lokman Bennani, Philippe Villedieu, Michel Salaün. A mixed adhesion–brittle fracture model and its application to the numerical study of ice shedding mechanisms
Engineering Fracture Mechanics, Elsevier, vol. 158, pp. 59-80
| [HAL] / [BIB] / [DOI] |
2016 |
Marc Budinger, Valérie Pommier-Budinger, Gael Napias, Arthur Costa da Silva. Ultrasonic Ice Protection Systems: Analytical and Numerical Models for Architecture Tradeoff
Journal of Aircraft, American Institute of Aeronautics and Astronautics, 53(3), p.680 - 690
| [HAL] / [BIB] / [DOI] |
2016 |
Cyril Sola, Bruno Castanié, Laurent Michel, Frederic Lachaud, Arnaud Delabie, Emmanuel Mermoz. On the role of kinking in the bearing failure of composite laminates
Composite Structures, Elsevier, 141, p.184-193
| [HAL] / [BIB] / [DOI] |
2016 |
Mohamed Amine Bouhlel, Nathalie Bartoli, Abdelkader Otsmane, Joseph Morlier. Improving kriging surrogates of high-dimensional design models by Partial Least Squares dimension reduction
Structural and Multidisciplinary Optimization, Springer Verlag (Germany), vol. 53(n° 5), pp. 935-952
| [HAL] / [BIB] / [DOI] |
2016 |
Faisal Qayyum, Masood Shah, Osama Shakeel, Fariha Mukhtar, Mehdi Salem, Farhad Rezai-Aria. Numerical simulation of thermal fatigue behavior in a cracked disc of AISI H-11 tool steel
Engineering Failure Analysis, Elsevier, 62, p.242-263
| [HAL] / [BIB] / [DOI] |
2016 |
Vincent Velay, H. Matsumoto, Vanessa Vidal, A. Chiba. Behavior modelling and microstructural evolutions of Ti-6Al-4V alloy under hot forming conditions
International Journal of Mechanical Sciences, Elsevier, 108-109, p.1-13
| [HAL] / [BIB] / [DOI] |
2016 |
Mickaël Duval, Jean-Charles Passieux, Michel Salaün, Stéphane Guinard. Non-intrusive coupling: recent advances and scalable nonlinear domain decomposition
Archives of Computational Methods in Engineering, Springer Verlag, 23(1), p.17-38
| [HAL] / [BIB] / [DOI] |
2016 |
Bernard Thibaut, Louis Denaud, Robert Collet, Rémy Marchal, Jacques Beauchêne, Frédéric Mothe, Pierre-Jean Méausoone, Patrick Martin, Pierre Larricq, Florent Eyma. Wood machining with a focus on French research in the last 50 years
Annals of Forest Science, Springer Nature (since 2011)/EDP Science (until 2010), 73(1), p.163-184
| [HAL] / [BIB] / [DOI] |
2016 |
Raffaele d'Elia, Gilles Dusserre, Sylvie del Confetto, Nicolas Eberling-Fux, Cedric Descarnps, Thierry Cutard. Cure kinetics of a polysilazane system: Experimental characterization and numerical modelling
European Polymer Journal, Elsevier, 76, p. 40-52
| [HAL] / [BIB] / [DOI] |
2016 |
Robin Bouclier, Jean-Charles Passieux, Michel Salaün. Local enrichment of NURBS patches using a non-intrusive coupling strategy: Geometric details, local refinement, inclusion, fracture
Computer Methods in Applied Mechanics and Engineering, Elsevier, 300, p.1-26
| [HAL] / [BIB] / [DOI] |
2016 |
Floran Barelli, Vincent Wagner, Raynald Laheurte, Gilles Dessein, Philippe Darnis, Olivier Cahuc, Michel Mousseigne. Orthogonal cutting of TA6V alloys with chamfered tools: Analysis of tool–chip contact lengths
Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture, SAGE Publications, 231(13), p.2384-2395
| [HAL] / [BIB] / [DOI] |
2016 |
Benjamin Vales, Steven Marguet, Romain Créac'Hcadec, Laurent Sohier, Jean-François Ferrero, Pablo Navarro. Numerical study of the local behaviour of adhesive bonds under dynamic loading
Journal of Adhesion Science and Technology, Taylor & Francis, 30(12), p.1319 - 1339
| [HAL] / [BIB] / [DOI] |
2016 |
Manuel Paredes. Enhanced Formulae for Determining Both Free Length and Rate of Cylindrical Compression Springs
Journal of Mechanical Design, American Society of Mechanical Engineers, 138(2)
| [HAL] / [BIB] / [DOI] |
2016 |
Jean-Emmanuel Pierré, Jean-Charles Passieux, Jean-Noël Périé, Florian Bugarin, Laurent Robert. Unstructured finite element-based digital image correlation with enhanced management of quadrature and lens distortions
Optics and Lasers in Engineering, Elsevier, 77, p.44-53
| [HAL] / [BIB] / [DOI] |
2016 |
L. Mezeix, Dominique Poquillon, Christophe Bouvet. Entangled Cross-Linked Fibres for an Application as Core Material for Sandwich Structures - Part II: Analytical Model
Applied Composite Materials, Springer Verlag (Germany), 23(1), p.87 - 100
| [HAL] / [BIB] / [DOI] |
2016 |
John Le Dref, Yann Landon, Gilles Dessein, Christine Espinosa. Modelling kinematics and cutting forces in vibration assisted drilling
Mechanics & Industry, EDP Sciences, 17(3), p.1-10
| [HAL] / [BIB] / [DOI] |
2016 |
Olfa Ksentini, Bertrand Combes, Mohamed Slim Abbes, Alain Daidié, Mohamed Haddar. Numerical study of self-loosening of a bolted assembly under transversal load
Mechanics & Industry, EDP Sciences, 17(5), p.507 1-11
| [HAL] / [BIB] / [DOI] |
2016 |
Rangasamy Prakash, Vijayan Krishnaraj, Redouane Zitoune, Jamal Sheikh-Ahmad. High-Speed Edge Trimming of CFRP and Online Monitoring of Performance of Router Tools Using Acoustic Emission
Materials, MDPI, 9(10), p.798
| [HAL] / [BIB] / [DOI] |
2016 |
Jean-Max Redonnet, Alejandro Gamboa Vázquez, Alberto Traslosheros Michel, Stéphane Segonds. Optimisation of free-form surface machining using parallel planes strategy and torus milling cutter
Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture, SAGE Publications, 232(2), p.240-250
| [HAL] / [BIB] / [DOI] |
2016 |
Fazila Mohd Zawawi, Peng Lv, Sebastien Prothin, Joseph Morlier, Emmanuel Bénard, Jean-Marc Moschetta. Performance Enhancement of Tilt-Body Micro Air Vehicle by Use of Orthotropic Laminated Proprotors
Applied Mechanics and Materials, Trans Tech Publications, vol. 819, pp. 585-590
| [HAL] / [BIB] / [DOI] |
2016 |
Etienne Gourc, Leonardo Sanches, Guilhem Michon, Valder Steffen. Post-critical analysis of ground resonance phenomenon: effect of stator asymmetry
Nonlinear Dynamics, Springer Verlag, 83(1), p.201--215
| [HAL] / [BIB] |
2016 |
K. Moussaoui, Stéphane Segonds, Walter Rubio, Michel Mousseigne. Studying the measurement by X-ray diffraction of residual stresses in Ti6Al4V titanium alloy
Materials Science and Engineering: A, Elsevier, 667, p.340--348
| [HAL] / [BIB] |
2016 |
Victor Potier, Catherine Pons Lelardeux, Michèle Lalanne, Pierre Lagarrigue. Making Complexity Fun-Machining Procedures in Mechanical Engineering
International Journal of Engineering Education, 32(1), p.491--500
| [HAL] / [BIB] |
2016 |
Dhiraj Kumar, K. K. Singh, Redouane Zitoune. Experimental investigation of delamination and surface roughness in the drilling of GFRP composite material with different drills
Advanced Manufacturing: Polymer & Composites Science, 2(2), p.47--56
| [HAL] / [BIB] |
2016 |
Charles Manière, Ugras Kus, Lise Durand, Ronan Mainguy, Julitte Huez, Denis Delagnes, Claude Estournès. Identification of the Norton-Green Compaction Model for the Prediction of the Ti-6Al-4V Densification During the Spark Plasma Sintering Process
Advanced Engineering Materials, Wiley-VCH Verlag, vol. 18(n° 10), p.1720-1727
| [HAL] / [BIB] / [DOI] |
2016 |
Yangyang Ge, Xiaojing Gong, Anita Hurez, Emmanuel de Luycker. Test methods for measuring pure mode III delamination toughness of composite
Polymer Testing, Elsevier, 55, p.261-268
| [HAL] / [BIB] / [DOI] |
2016 |
Redouane Zitoune, V. Krishnaraj, Francis Collombet, Sabine Le Roux. Experimental and numerical analysis on drilling of carbon fibre reinforced plastic and aluminium stacks
Composite Structures, Elsevier, 146, p.148-158
| [HAL] / [BIB] / [DOI] |
2016 |
Aurélien Fabas, Daniel Monceau, Claudie Josse, Pascal Lamesle, Aurélie Rouaix-Vande Put. Mechanism of metal dusting corrosion by pitting of a chromia-forming alloy at atmospheric pressure and low gas velocity
Corrosion Science, Elsevier, 107, p.204-210
| [HAL] / [BIB] / [DOI] |
2016 |
Benjamin Ostré, Christophe Bouvet, Clément Minot, Jacky Aboissière. Experimental analysis of CFRP laminates subjected to compression after edge impact
Composite Structures, Elsevier, 152, p.767-778
| [HAL] / [BIB] / [DOI] |
2016 |
M. Charlotte. An atomistically-meaningful pseudocontinuum representation for the finite monatomic chain with harmonic nearest-neighbor interactions
International Journal of Solids and Structures, Elsevier, 97-98, p.209-225
| [HAL] / [BIB] / [DOI] |
2016 |
Damien Mauduit, Gilles Dusserre, Thierry Cutard. Probabilistic rupture analysis of a brittle spray deposited Si–Al alloy under thermal gradient: Characterization and thermoelastic sizing guidelines
Materials & Design, Elsevier, 95, p. 441-421
| [HAL] / [BIB] / [DOI] |
2016 |
Natassia Lona Batista, Philippe Olivier, Gérard Bernhart, Mirabel Cerqueira Rezende, Edson Cocchieri Botelho. Correlation between degree of crystallinity, morphology and mechanical properties of PPS/carbon fiber laminates
Materials Research, Associação Brasileira de Metalurgia e Materiais (ABM); Associação Brasileira de Cerâmica (ABC); Associação Brasileira de Polímeros (ABPol), 19(1), p. 195-201
| [HAL] / [BIB] / [DOI] |
2016 |
Bilal Karabagli, Thierry Simon, Jean-José Orteu. A new chain-processing-based computer vision system for automatic checking of machining set-up - Application for machine tools safety
International Journal of Advanced Manufacturing Technology, Springer Verlag, 82(9)
| [HAL] / [BIB] / [DOI] |
2016 |
P. A. Rey, John Le Dref, Johanna Senatore, Yann Landon. Modelling of cutting forces in orbital drilling of titanium alloy Ti6Al4V
International Journal of Machine Tools and Manufacture, Elsevier, 106, p.75--88
| [HAL] / [BIB] |
2016 |
Jamel Saoudi, Redouane Zitoune, Suhasini Gururaja, Salah Mezlini, Akshay Amaranath Hajjaji. Prediction of critical thrust force for exit-ply delamination during drilling composite laminates: thermo-mechanical analysis
International Journal of Machining and Machinability of Materials, Inderscience, 18(1/2), p.77
| [HAL] / [BIB] |
2016 |
Isabelle Danis, Frederic Monies, Pierre Lagarrigue, Nathalie Wojtowicz. Cutting forces and their modelling in plunge milling of magnesium-rare earth alloys
International Journal of Advanced Manufacturing Technology, Springer Verlag, 84(9), p.1801--1820
| [HAL] / [BIB] |
2016 |
Christian Gogu, Anirban Chaudhuri, Christian Bes. How Adaptively Constructed Reduced Order Models Can Benefit Sampling-Based Methodsfor Reliability Analyses
International Journal of Reliability, Quality and Safety Engineering, 23(05), p.1650019
| [HAL] / [BIB] |
2016 |
K. Moussaoui, Frederic Monies, Michel Mousseigne, Patrick Gilles, Walter Rubio. Balancing the transverse cutting force during inclined milling and effect on tool wear: application to Ti6Al4V
International Journal of Advanced Manufacturing Technology, Springer Verlag, 82(9), p.1859--1880
| [HAL] / [BIB] |
2016 |
Tao Li, Sébastien Seguy, Alain Berlioz. Dynamics of Cubic and Vibro-Impact Nonlinear Energy Sink: Analytical, Numerical, and Experimental Analysis
Journal of Vibration and Acoustics, American Society of Mechanical Engineers, 138(3), p.031010-9
| [HAL] / [BIB] / [DOI] |
2016 |
Jie Chen, Stefan K Stefanov, Lucien Baldas, Stéphane Colin. Analysis of flow induced by temperature fields in ratchet-like microchannels by Direct Simulation Monte Carlo
International Journal of Heat and Mass Transfer, Elsevier, 99, p.672-680
| [HAL] / [BIB] / [DOI] |
2016 |
Pierre Rahme, Yann Landon, Robert Piquet, Frederic Lachaud, Pierre Lagarrigue. Drilling analytical model of composite material with pilot hole
Mechanics & Industry, EDP Sciences, 17(5), p.513
| [HAL] / [BIB] / [DOI] |
2016 |
Mohamed Amine Bouhlel, Nathalie Bartoli, Abdelkader Otsmane, Joseph Morlier. An improved approach to estimate the hyper-parameters of the kriging model for high-dimensional problems through the Partial Least Squares method
Mathematical Problems in Engineering, Hindawi Publishing Corporation, 2016, p.1-11
| [HAL] / [BIB] / [DOI] |
2016 |
C Rouzaud, Fabrice Gatuingt, G Hervé, N Moussallam, Olivier Dorival. Influence of the aircraft crash induced local nonlinearities on the overall dynamic response of a RC structure through a parametric study
Nuclear Engineering and Design, Elsevier
| [HAL] / [BIB] / [DOI] |
2016 |
Rémi Gilblas, Thierry Sentenac. Effect and correction of the shift in spectral images for polychromatic thermography
International Journal of Thermal Sciences, Elsevier, 107, p.153-160
| [HAL] / [BIB] / [DOI] |
2016 |
Yiwei Wang, Nicolas Binaud, Christian Gogu, Christian Bes, Jian Fu. Determination of Paris' law constants and crack length evolution via Extended and Unscented Kalman filter: An application to aircraft fuselage panels
Mechanical Systems and Signal Processing, Elsevier, 80, p.262--281
| [HAL] / [BIB] |
2016 |
Victor Achard, Alain Daidié, Manuel Paredes, Clément Chirol. Cold expansion process on hard alloy holes-experimental and numerical evaluation
Mechanics & Industry, EDP Sciences, 17(3), p.303 1-16
| [HAL] / [BIB] / [DOI] |
2016 |
Benjamin Vales, Victor Munoz Cuartas, Hélène Welemane, Marie-Laetitia Pastor, Baptiste Trajin, Marianne Perrin, Arthur Cantarel, Moussa Karama. Heat source estimation in anisotropic materials
Composite Structures, Elsevier, 136, p.287-296
| [HAL] / [BIB] / [DOI] |
2016 |
Patrice Longère, André Dragon. Enlarged finite strain modelling incorporating adiabatic shear banding and post-localization microvoiding as shear failure mechanisms
International Journal of Damage Mechanics, SAGE Publications, 25(8), p.1142--1169
| [HAL] / [BIB] / [DOI] |
2016 |
Jean-Charles Maré. Requirement-based system-level simulation of mechanical transmissions with special consideration of friction, backlash and preload
Simulation Modelling Practice and Theory, Elsevier, 63, p.58--82
| [HAL] / [BIB] |
2016 |
Olivier Dorival, Pablo Navarro, Steven Marguet, Caroline Petiot, Michel Bermudez, Didier Mesnagé, Jean-François Ferrero. Experimental results of medium velocity impact tests for reinforced foam core braided composite structures
Journal of Sandwich Structures and Materials, SAGE Publications
| [HAL] / [BIB] / [DOI] |
2016 |
Elsa Piollet, Dominique Poquillon, Guilhem Michon. Dynamic hysteresis modelling of entangled cross-linked fibres in shear
Journal of Sound and Vibration, Elsevier, 383, p.248-264
| [HAL] / [BIB] / [DOI] |
2016 |
Lisa Rivière, Antoine Lonjon, Eric Dantras, Colette Lacabanne, Philippe Olivier, Nathalie Rocher Gleizes. Silver fillers aspect ratio influence on electrical and thermal conductivity in PEEK/Ag nanocomposites
European Polymer Journal, Elsevier, 85, p.115-125
| [HAL] / [BIB] / [DOI] |
2016 |
Mudaser Ullah, Chuan Song Wu, Masood Shah. In situ delta ferrite estimation and their effects on FCPR at different orientations of multipass shielded metal arc welded SS304L
Journal of Manufacturing Processes, Society of Manufacturing Engineers, 21, p.107-123
| [HAL] / [BIB] / [DOI] |
2016 |
Xavier Giraud, Marc Budinger, Xavier Roboam, Hubert Piquet, Marc Sartor, Jérôme Faucher. Optimal design of the Integrated Modular Power Electronics Cabinet
Aerospace Science and Technology, Elsevier, 48, p.37 - 52
| [HAL] / [BIB] / [DOI] |
2016 |
Victor Munoz, Benjamin Vales, Marianne Perrin, Marie-Laetitia Pastor, Hélène Welemane, Arthur Cantarel, Moussa Karama. Damage detection in CFRP by coupling acoustic emission and infrared thermography
Composites Part B: Engineering, Elsevier, 85, p.68-75
| [HAL] / [BIB] / [DOI] |
2016 |
Sonia Cafieri, Frederic Monies, Marcel Mongeau, Christian Bes. Plunge milling time optimization via mixed-integer nonlinear programming
Computers & Industrial Engineering, Elsevier, 98, p.434-445
| [HAL] / [BIB] / [DOI] |
2016 |
Sonia Sassi, Philippe Marguerès, Philippe Olivier, Rébecca Le Begue. Determination of anisotropic geometrical parameters for the electrical characterization of carbon/epoxy composite during oven curing
Composites Part A: Applied Science and Manufacturing, Elsevier, 80, p.204--216
| [HAL] / [BIB] |
2016 |
Jamel Saoudi, Redouane Zitoune, Salah Mezlini, Suhasini Gururaja, Philippe Seitier. Critical thrust force predictions during drilling: Analytical modeling and X-ray tomography quantification
Composite Structures, Elsevier, 153, p.886--894
| [HAL] / [BIB] |
2015 |
Mathieu Ladonne, Mehdi Cherif, Yann Landon, Jean-Yves K’nevez, Olivier Cahuc, Côme de Castelbajac. Modelling the vibration-assisted drilling process: identification of influential phenomena
International Journal of Advanced Manufacturing Technology, Springer Verlag, 81(9-12), p.1657-1666
| [HAL] / [BIB] |
2015 |
Ilisio Viana, Jean-José Orteu, Nicolas Cornille, Florian Bugarin. Inspection of aeronautical mechanical parts with a pan-tilt-zoom camera: an approach guided by the computer-aided design model
Journal of Electronic Imaging, SPIE and IS&T, 24(6), p.061118
| [HAL] / [BIB] / [DOI] |
2015 |
Zeeshan Anjum, Faisal Qayyum, Shahab Khushnood, Sagheer Ahmed, Masood Shah. Prediction of non-propagating fretting fatigue cracks in Ti6Al4V sheet tested under pin-in-dovetail configuration: Experimentation and numerical simulation
Materials & Design, Elsevier, 87, p. 750-758
| [HAL] / [BIB] / [DOI] |
2015 |
Aldo Frezzotti, Hacene Si Hadj Mohand, Christine Barrot, Stéphane Colin. Role of diffusion on molecular tagging velocimetry technique for rarefied gas flow analysis
Microfluidics and Nanofluidics, Springer Verlag, 19(6), p.1335 - 1348
| [HAL] / [BIB] / [DOI] |
2015 |
Y. Liu, Vanessa Vidal, Sabine Le Roux, Fabien Blas, Florence Ansart, Philippe Lours. Influence of isothermal and cyclic oxidation on the apparent interfacial toughness in thermal barrier coating systems
Journal of the European Ceramic Society, Elsevier, 35(15), p. 4269-4275
| [HAL] / [BIB] / [DOI] |
2015 |
Aurelien Reysset, Marc Budinger, Jean-Charles Maré. Computer-aided definition of sizing procedures and optimization problems of mechatronic systems
Concurrent Engineering: Research and Applications, SAGE Publications, 23(4), p.320 - 332
| [HAL] / [BIB] / [DOI] |
2015 |
Igor Jovančević, Stanislas Larnier, Jean-José Orteu, Thierry Sentenac. Automated exterior inspection of an aircraft with a pan-tilt-zoom camera mounted on a mobile robot
Journal of Electronic Imaging, SPIE and IS&T, 24(6), p.061110
| [HAL] / [BIB] / [DOI] |
2015 |
Andre Chateau Akue Asseko, Benoît Cosson, Fabrice Schmidt, Yannick Le Maoult, Rémi Gilblas, Eric Lafranche. Laser transmission welding of composites - Part B: Experimental validation of numerical model
Infrared Physics and Technology, Elsevier, 73, p. 304-311
| [HAL] / [BIB] / [DOI] |
2015 |
Christophe Rouzaud, Fabrice Gatuingt, Olivier Dorival, Hervé Guillaume, Louis Kovalevsky. A new methodology for assessing the global dynamic response of large shell structures under impact loading
Engineering Computations, Emerald, 32(8), p.2343-2382
| [HAL] / [BIB] / [DOI] |
2015 |
Pierre-Jacques Liotier, Quentin Govignon, Elinor Swery, Sylvain Drapier, Simon Bickerton. Characterisation of woven flax fibres reinforcements: Effect of the shear on the in-plane permeability
Journal of Composite Materials, SAGE Publications, 49(27), p.3415-3430
| [HAL] / [BIB] / [DOI] |
2015 |
Irène Maillet, Laurent Michel, Frédéric Souric, Yves Gourinat. Mode II fatigue delamination growth characterization of a carbon/epoxy laminate at high frequency under vibration loading
Engineering Fracture Mechanics, Elsevier, 149, p.298-312
| [HAL] / [BIB] / [DOI] |
2015 |
Christophe Cluzel, Philippe Rouch, Olivier Dorival, Stéphanie Behar. Experimental identification and associated model of the dissipation in the electric cables of a satellite structure
Journal of Sound and Vibration, Elsevier, 357, p.156-167
| [HAL] / [BIB] / [DOI] |
2015 |
Mauricio Torres, Francis Collombet, Bernard Douchin, Laurent Crouzeix, Yves-Henry Grunevald, Jérôme Lubin, Thierry Camps. Monitoring of the curing process of composite structures by tunnelling junction sensors
Sensors and Actuators A: Physical, Elsevier, 235, p.256--264
| [HAL] / [BIB] / [DOI] |
2015 |
Masood Shah, Catherine Mabru, Manel Baccar, Farhad Rezai-Aria. Normalization of fatigue crack growth data in AISI H11 tool steel at room and elevated temperature
International Journal of Damage Mechanics, SAGE Publications, 24(8), p.1111-1140
| [HAL] / [BIB] / [DOI] |
2015 |
Jérôme Michetti, Marie Georgelin-Gurgel, Jean-Philippe Mallet, Franck Diemer, Kader Boulanouar. Influence of CBCT parameters on the output of an automatic edge-detection-based endodontic segmentation
Dentomaxillofacial Radiology, British Institute of Radiology, 44(8)
| [HAL] / [BIB] / [DOI] |
2015 |
Serge Abrate, Jean-François Ferrero, Pablo Navarro. Cohesive zone models and impact damage predictions for composite structures
Meccanica, Springer Verlag, 50(10), p.2587 - 2620
| [HAL] / [BIB] / [DOI] |
2015 |
N Cadorin, Redouane Zitoune, Philippe Seitier, Francis Collombet. Analysis of damage mechanism and tool wear while drilling of 3D woven composite materials using internal and external cutting fluid
Journal of Composite Materials, SAGE Publications, 49(22), p.2687-2703
| [HAL] / [BIB] / [DOI] |
2015 |
Florian Bugarin, Adrien Bartoli, Didier Henrion, Jean-Bernard Lasserre, Jean-José Orteu, Thierry Sentenac. Rank-constrained fundamental matrix estimation by polynomial global optimization versus the eight-point algorithm
Journal of Mathematical Imaging and Vision, Springer Verlag, 53(1), pp.42-60
| [HAL] / [BIB] |
2015 |
Benoît Vieille, W. Albouy, Lakhdar Taleb. Influence of stamping on the compressive behavior and the damage mechanisms of C/PEEK laminates bolted joints under severe conditions
Composites Part B: Engineering, Elsevier, 79, p.631-638
| [HAL] / [BIB] / [DOI] |
2015 |
Andre Chateau Akue Asseko, Benoît Cosson, Fabrice Schmidt, Yannick Le Maoult, Eric Lafranche. Laser transmission welding of composites-Part A: Thermo-physical and optical characterization of materials
Infrared Physics and Technology, Elsevier, 72, p. 293-299
| [HAL] / [BIB] / [DOI] |
2015 |
Sonia Djebali, Alexandre Perles, Sylvain Lemouzy, Stéphane Segonds, Walter Rubio, Jean-Max Redonnet. Milling plan optimization with an emergent problem solving approach
Computers & Industrial Engineering, Elsevier, 87, p.506-517
| [HAL] / [BIB] / [DOI] |
2015 |
Mercedes Bergoglio, Domenico Mari, Jie Chen, Hacene Si Hadj Mohand, Stéphane Colin, Christine Barrot-Lattes. Experimental and computational study of gas flow delivered by a rectangular microchannels leak
Measurement - Journal of the International Measurement Confederation (IMEKO), Elsevier, 73, p.551 - 562
| [HAL] / [BIB] / [DOI] |
2015 |
Florian Bugarin, Didier Henrion, Jean-Bernard Lasserre. Minimizing the sum of many rational functions
Mathematical Programming Computation, Springer, 8(1), pp. 83-111
| [HAL] / [BIB] / [DOI] |
2015 |
Frederic Lachaud, Christine Espinosa, Laurent Michel, Pierre Rahme, Robert Piquet. Modelling Strategies for Simulating Delamination and Matrix Cracking in Composite Laminates
Applied Composite Materials, Springer Verlag (Germany), 22(4), p.377-403
| [HAL] / [BIB] / [DOI] |
2015 |
Ion Hazyuk, Marc Budinger, Florian Sanchez, Jean-Charles Maré, Stéphane Colin. Scaling laws based metamodels for the selection of the cooling strategy of electromechanical actuators in the early design stages
Mechatronics, Elsevier, 29, p.67 - 77
| [HAL] / [BIB] / [DOI] |
2015 |
Benjamin Ostré, Christophe Bouvet, Clément Minot, Jacky Aboissière. Edge impact modeling on stiffened composite structures
Composite Structures, Elsevier, 126, p.314-328
| [HAL] / [BIB] / [DOI] |
2015 |
Guillaume Lélias, Eric Paroissien, Frederic Lachaud, Joseph Morlier, Sébastien Schwartz, Cyril Gavoille. An extended semi-analytical formulation for fast and reliable mode I/II stress analysis of adhesively bonded joints
International Journal of Solids and Structures, Elsevier, vol. 62, pp. 18-38
| [HAL] / [BIB] / [DOI] |
2015 |
M. Shah, Catherine Mabru, Farhad Rezai-Aria. Characterisation of the surface damage of X38CrMoV5 (AISI H11) tool steel at room temperature and 600 degrees C
Fatigue and Fracture of Engineering Materials and Structures, Wiley-Blackwell, 38(6), p. 742-754
| [HAL] / [BIB] / [DOI] |
2015 |
Etienne Gourc, Guilhem Michon, Sébastien Seguy, Alain Berlioz. Targeted energy transfer under harmonic forcing with a vibro-impact nonlinear energy sink: analytical and experimental developments
Journal of Vibration and Acoustics, American Society of Mechanical Engineers, 137(3), p.031008-7
| [HAL] / [BIB] / [DOI] |
2015 |
Folly Abevi, Alain Daidié, Michel Chaussumier, Marc Sartor. Static Load Distribution and Axial Stiffness in a Planetary Roller Screw Mechanism
Journal of Mechanical Design, 138(1), p.012301 1-11
| [HAL] / [BIB] / [DOI] |
2015 |
Teddy Lisle, Christophe Bouvet, Marie-Laetitia Pastor, Thomas Rouault, Philippe Marguerès. Damage of woven composite under tensile and shear stress using infrared thermography and micrographic cuts
Journal of Materials Science, Springer Verlag, 50(18), p.6154-6170
| [HAL] / [BIB] / [DOI] |
2015 |
Teddy Lisle, Christophe Bouvet, Natthawat Hongkarnjanakul, Marie-Laetitia Pastor, Samuel Rivallant, Philippe Marguerès. Measure of fracture toughness of compressive fiber failure in composite structures using infrared thermography
Composites Science and Technology, Elsevier, 112, p.22-33
| [HAL] / [BIB] / [DOI] |
2015 |
Valérie Pommier-Budinger, Olivier Cherrier. Baffle silencer with tunable resonators for adaptive control of variable tonal noise
Journal of Vibration and Control, SAGE Publications, 21(9), p.1801-1809
| [HAL] / [BIB] / [DOI] |
2015 |
Fabien Hospital, Marc Budinger, Aurelien Reysset, Jean-Charles Maré. Preliminary design of aerospace linear actuator housings
Aircraft Engineering and Aerospace Technology, Emerald, 87(3), p.224 - 237
| [HAL] / [BIB] / [DOI] |
2015 |
Gilles Dusserre. Modelling the hysteretic wale-wise stretching behaviour of technical plain knits
European Journal of Mechanics - A/Solids, Elsevier, 51, p. 160-171
| [HAL] / [BIB] / [DOI] |
2015 |
Elodie Cabrol, Christine Boher, Vanessa Vidal, Farhad Rezai-Aria, Franck Touratier. Plastic strain of cobalt-based hardfacings under friction loading
Wear, Elsevier, 330(SI), p. 354-363
| [HAL] / [BIB] / [DOI] |
2015 |
Shereen Alattar, Walid Nehme, Franck Diemer, Alfred Naaman. The Influence of Brushing Motion on the Cutting Behavior of 3 Reciprocating Files in Oval-shaped Canals
Journal of Endodontics, Elsevier, 41(5), p.703 - 709
| [HAL] / [BIB] / [DOI] |
2015 |
Laurent Mezeix, Dominique Poquillon, Christophe Bouvet. Entangled cross-linked fibres for an application as core material for sandwich structures - Part I: Experimental investigation
Applied Composite Materials, Springer Verlag (Germany), 23(1), p.71-86
| [HAL] / [BIB] / [DOI] |
2015 |
Valeria La Saponara, Anaïs Farrugia, Wahyu Lestari, Anastasia Muliana. Analysis of ultrasonic waveforms from smart sandwich composite structures under creep bending at elevated temperature
Journal of Intelligent Material Systems and Structures, SAGE Publications, 26(7), p.810-829
| [HAL] / [BIB] / [DOI] |
2015 |
Mathieu Fogel, Patricia Parlevliet, Matthias Geistbeck, Philippe Olivier, Eric Dantras. Thermal, rheological and electrical analysis of MWCNTs/epoxy matrices
Composites Science and Technology, Elsevier, vol. 110, pp. 118-125
| [HAL] / [BIB] / [DOI] |
2015 |
F. Szmytka, Mehdi Salem, Farhad Rezai-Aria, A. Oudin. Thermal fatigue analysis of automotive Diesel piston: Experimental procedure and numerical protocol
International Journal of Fatigue, Elsevier, 73, p.48-57
| [HAL] / [BIB] / [DOI] |
2015 |
Sabine Le Roux, Frédéric Deschaux-Beaume, Thierry Cutard, Philippe Lours. Quantitative assessment of the interfacial roughness in multi-layered materials using image analysis: Application to oxidation in ceramic-based materials
Journal of the European Ceramic Society, Elsevier, 35(3), p.1063-1079
| [HAL] / [BIB] / [DOI] |
2015 |
Kuniaki Dohda, Christine Boher, Farhad Rezai-Aria, Numpon Mahayotsanun. Tribology in metal forming at elevated temperatures
review
Friction, Springer, 3(1), p. 1-27
| [HAL] / [BIB] / [DOI] |
2015 |
Stéphane Colin, Juergen Brandner, Gian Luca Morini, Bernd Michel. Selected papers from the 3rd European Conference on Microfluidics: µFlu’12
Microsystem Technologies, Springer Verlag, 21(3), p.497-498
| [HAL] / [BIB] / [DOI] |
2015 |
Andre Chateau Akue Asseko, Benoit Cosson, Mylene Deleglise, Fabrice Schmidt, Yannick Le Maoult, Eric Lafranche. Analytical and numerical modeling of light scattering in composite transmission laser welding process
International Journal of Material Forming, Springer Verlag, 8(1), p.127-135
| [HAL] / [BIB] / [DOI] |
2015 |
Feriel Samouda, Stéphane Colin, Christine Barrot, Lucien Baldas, Juergen Brandner. Micro molecular tagging velocimetry for analysis of gas flows in mini and micro systems
Microsystem Technologies, Springer Verlag, 21(3), p.527 - 537
| [HAL] / [BIB] / [DOI] |
2015 |
M. Haddad, Redouane Zitoune, Florent Eyma, Bruno Castanié. Influence of Machining Process and Machining Induced Surface Roughness on Mechanical Properties of Continuous Fiber Composites
Experimental Mechanics, Society for Experimental Mechanics, 55(3), p. 519-528
| [HAL] / [BIB] / [DOI] |
2015 |
Biao Wang, L. D. Cot, Luc Adolphe, Sandrine Geoffroy, J. Morchain. Estimation of wind energy over roof of two perpendicular buildings
Energy and Buildings, Elsevier, 88, p.57--67
| [HAL] / [BIB] / [DOI] |
2015 |
P. Rahme, Yann Landon, Frederic Lachaud, Robert Piquet, Pierre Lagarrigue. Drilling of thick composite material with a small-diameter twist drill
International Journal of Advanced Manufacturing Technology, Springer Verlag, 76(9-12), p.1543-1553
| [HAL] / [BIB] |
2015 |
Mahamadou Moukaila, Thierry Camps, Philippe Marguerès, Philippe Olivier, Christophe Escriba, Jean-Yves Fourniols. Cure Monitoring and SHM of Carbon Fiber Reinforced Polymer Part I : Impedance Analysis and Multiphysic Sensitivity
e-Journal of Nondestructive Testing, Nondestructive Testing (NDT), 20(2), p.560-566
| [HAL] / [BIB] |
2015 |
Michel Salaün, Stéphanie Salmon. Low-order finite element method for the well-posed bidimensional Stokes problem
IMA Journal of Numerical Analysis, Oxford University Press (OUP), 35(1), p.427-453
| [HAL] / [BIB] / [DOI] |
2015 |
Jérémie Vignes, Fabrice Schmidt, Gilles Dusserre, Jean Frédéric Dalmasso. Numerical simulation of extruded clay paste compression
International Journal of Material Forming, Springer Verlag, 8(1), p.111-118
| [HAL] / [BIB] / [DOI] |
2015 |
Christian Gogu. Improving the efficiency of large scale topology optimization through on-the-fly reduced order model construction
International Journal for Numerical Methods in Engineering, Wiley, 101(4), p.281--304
| [HAL] / [BIB] |
2015 |
Everson Kandare, Akbar A. Khatibi, Sanghyun Yoo, Ruoyu Wang, Jun Ma, Philippe Olivier, Nathalie Gleizes, Chun H. Wang. Improving the through-thickness thermal and electrical conductivity of carbon fibre/epoxy laminates by exploiting synergy between graphene and silver nano-inclusions
Composites Part A: Applied Science and Manufacturing, Elsevier, 69, p.72--82
| [HAL] / [BIB] |
2015 |
Etienne Gourc, Sébastien Seguy, Guilhem Michon, Alain Berlioz, Brian Mann. Quenching chatter instability in turning process with a vibro-impact nonlinear energy sink
Journal of Sound and Vibration, Elsevier, 355, p.392-406
| [HAL] / [BIB] / [DOI] |
2015 |
Patrice Longère, André Dragon. Dynamic vs. quasi-static shear failure of high strength metallic alloys: Experimental issues
Mechanics of Materials, Elsevier, 80, p.203--218
| [HAL] / [BIB] / [DOI] |
2015 |
Sonia Sassi, Philippe Marguerès, Thierry Camps, Mahamadou Mounkaila, Philippe Olivier. CURE MONITORING AND SHM OF CARBON FIBER REINFORCED POLYMER PART II : MULTI-PHYSICAL CORRELATIONS
e-Journal of Nondestructive Testing, Nondestructive Testing (NDT), 20(2), p.567-574
| [HAL] / [BIB] |
2015 |
Pablo Navarro, Florian Pascal, Julien Aubry, Steven Marguet, Jean-François Ferrero, Sandrine Lemaire, Patrice Rauch. Semi-continuous approach for the study of impacts on woven composite laminates: Modeling interlaminar behavior with a specific interface element
International Journal of Impact Engineering, Elsevier, 75(6), p.184 - 193
| [HAL] / [BIB] / [DOI] |
2015 |
Florian Pascal, Pablo Navarro, Steven Marguet, Jean-François Ferrero. On the modelling of low to medium velocity impact onto woven composite materials with a 2D semi-continuous approach
Composite Structures, Elsevier, 134, p.302-310
| [HAL] / [BIB] / [DOI] |
2015 |
J. Harvent, Benjamin Coudrin, L. Brèthes, Jean-José Orteu, Michel Devy. Shape Measurement Using a New Multi-step Stereo-DIC Algorithm That Preserves Sharp Edges
Experimental Mechanics, Society for Experimental Mechanics, 55(1), p.167-176
| [HAL] / [BIB] / [DOI] |
2015 |
L. Jaeger, Stéphane Segonds, Christian Bes. Methodology Based on Multiagent for Solving Multidisciplinary Optimization Problem Under Uncertainty
Journal of Aerospace Information Systems, American Institute of Aeronautics and Astronautics, 12(2), p.290--298
| [HAL] / [BIB] |
2015 |
Jean-Charles Passieux, Jean-Noël Périé, Michel Salaün. A dual domain decomposition method for finite element digital image correlation
International Journal for Numerical Methods in Engineering, Wiley, 102(10), p.1670-1682
| [HAL] / [BIB] / [DOI] |
2015 |
Florentin Berthet, Maxime Boulanghien, Gérard Bernhart, Yannick Soudais. Méthodes de détermination de la résistance en cisaillement à l’interface. Application au PA66 10%FC. Methods for determining interfacial shear strength. Application to PA66 10%CF
Revue des composites et des matériaux avancés = Journal of Composite and Advanced Materials, IIETA, 25(3_4), p.295-309
| [HAL] / [BIB] / [DOI] |
2015 |
Olfa Ksentini, Bertrand Combes, Mohamed Slim Abbes, Alain Daidié, Mohamed Haddar. Simplified model to study the dynamic behaviour of a bolted joint and its self loosening
Structural Engineering and Mechanics, 55(3), p.639-654
| [HAL] / [BIB] / [DOI] |
2015 |
Olivier Dorival, Pablo Navarro, Steven Marguet, C Petiot, M Bermudez, D Mesnagé, Jean-François Ferrero. Experimental study of impact energy absorption by reinforced braided composite structures: Dynamic crushing tests
Composites Part B: Engineering, Elsevier, 78, p.244-255
| [HAL] / [BIB] / [DOI] |
2015 |
Pablo Navarro, Julien Aubry, Pascal Florian, Steven Marguet, Jean-François Ferrero, Olivier Dorival. Effects of the stacking sequence, material nature and addition of an adhesive film on the delamination resistance of woven composite laminates in mode I and II
Advanced composites letters, Woodhead Publishing Limited, 24(1), p.1-5
| [HAL] / [BIB] |
2015 |
Hakim Abdulhamid, Christophe Bouvet, Laurent Michel, Jacky Aboissière, Clément Minot. Influence of internally dropped-off plies on the impact damage of asymmetrically tapered laminated CFRP
Acta Materialia, Elsevier, vol. 68, pp. 110-120
| [HAL] / [BIB] / [DOI] |
2015 |
Soraya Catche, Robert Piquet, Frederic Lachaud, Bruno Castanié, Audrey Benaben. Analysis of hole wall defects of drilled carbon fiber reinforced polymer laminates
Journal of Composite Materials, SAGE Publications, 49(10), p.1223-1240
| [HAL] / [BIB] / [DOI] |
2015 |
Delphine Carponcin, Eric Dantras, Guilhem Michon, Jany Dandurand, Gwenaëlle Aridon, Franck Levallois, Laurent Cadiergues, Colette Lacabanne. New hybrid polymer nanocomposites for passive vibration damping by incorporation of carbon nanotubes and lead zirconate titanate particles
Journal of Non-Crystalline Solids, Elsevier, vol. 409, pp. 20-26
| [HAL] / [BIB] / [DOI] |
2015 |
Sami Daouk, François Louf, Olivier Dorival, Laurent Champaney, Sylvie Audebert. Uncertainties in structural dynamics: overview and comparative analysis of methods
Mechanics & Industry, EDP Sciences, 16(4), p.10
| [HAL] / [BIB] / [DOI] |
2015 |
Xiaojing Gong, Pengcheng Cheng, Shahram Aivazzadeh, Xinran Xiao. Design and optimization of bonded patch repairs of laminated composite structures
Composite Structures, Elsevier, 123, p.292--300
| [HAL] / [BIB] / [DOI] |
2015 |
L. Mezeix, A. Seman, M. N. M. Nasir, Y. Aminanda, A. Rivai, Bruno Castanié, Philippe Olivier, K. M. Ali. Spring-back simulation of unidirectional carbon/epoxy flat laminate composite manufactured through autoclave process
Composite Structures, Elsevier, 124, p.196--205
| [HAL] / [BIB] |
2015 |
Emile Roux, Patrice Longère, Olivier Cherrier, Thierry Millot, Didier Capdeville, Jacques Petit. Analysis of ASB assisted failure in a high strength steel under high loading rate
Materials & Design, Elsevier, 75, p.149--159
| [HAL] / [BIB] |
2015 |
Matthieu Mulle, Ali Moussawi, Gilles Lubineau, Samuel Durand, Didier Falandry, Philippe Olivier. Response of fiber Bragg gratings bonded on a glass/epoxy laminate subjected to static loadings
Composite Structures, Elsevier, 130, p.75--84
| [HAL] / [BIB] / [DOI] |
2015 |
Donatien Cornette, Benjamin Kerdreux, Guilhem Michon, Yves Gourinat. Aeroelastic Tailoring of Helicopter Blades
Journal of Computational and Nonlinear Dynamics, American Society of Mechanical Engineers (ASME), 10(6), p.061001--061001--12
| [HAL] / [BIB] |
2015 |
M. Saleem, Redouane Zitoune, I. El Sawi, H. Bougherara. Role of the surface quality on the mechanical behavior of CFRP bolted composite joints
International Journal of Fatigue, Elsevier, 80, p.246--256
| [HAL] / [BIB] |
2015 |
Patrice Longère, Suraj Bhogaraju, Dragos Craciun. Void collapse/growth in solid materials under overall shear loading
Mechanics Research Communications, Elsevier, 69, p.1--7
| [HAL] / [BIB] |
2015 |
Jean-Charles Passieux, Florian Bugarin, Christoph David, Jean-Noël Périé, Laurent Robert. Multiscale displacement field measurement using digital image correlation: Application to the identification of elastic properties
Experimental Mechanics, Society for Experimental Mechanics, 55(1), p.121-137
| [HAL] / [BIB] / [DOI] |
2015 |
Hiroaki Matsumoto, Vincent Velay, Akihiko Chiba. Flow behavior and microstructure in Ti-6Al-4V alloy with an ultrafine-grained alpha-single phase microstructure during low-temperature-high-strain-rate superplasticity
Materials & Design, Elsevier, 66, p. 611-617
| [HAL] / [BIB] / [DOI] |
2015 |
Frederic Lachaud, Christine Espinosa, Laurent Michel, Pierre Rahme, Robert Piquet. Modelling Strategies for Predicting the Residual Strength of Impacted Composite Aircraft Fuselages
Applied Composite Materials, Springer Verlag (Germany), 22(6), p.599--621
| [HAL] / [BIB] / [DOI] |
2015 |
Kamel Moussaoui, Michel Mousseigne, Johanna Senatore, Remy Chieragatti, Pascal Lamesle. Influence of Milling on the Fatigue Lifetime of a Ti6Al4V Titanium Alloy
Metals, MDPI, 5(3), p.1148-1162
| [HAL] / [BIB] / [DOI] |
2015 |
Nicolas Cadorin, Redouane Zitoune. Wear signature on hole defects as a function of cutting tool material for drilling 3D interlock composite
Wear, Elsevier, 332-333, p.742--751
| [HAL] / [BIB] |
2015 |
A. Beddiar, Redouane Zitoune, Francis Collombet, Y. H. Grunevald, M. T. Abadlia, N. Bourahla. Compressive behaviour of concrete elements confined with GFRP-prefabricated bonded shells
European Journal of Environmental and Civil Engineering, Taylor & Francis, 19(1), p.65--80
| [HAL] / [BIB] |
2015 |
P. Rahme, Yann Landon, Frederic Lachaud, Robert Piquet, Pierre Lagarrigue. Delamination-free drilling of thick composite materials
Composites Part A: Applied Science and Manufacturing, Elsevier, 72, p.148--159
| [HAL] / [BIB] |
2015 |
Mauricio Torres, Francis Collombet, Bernard Douchin, Laurent Crouzeix, Yves-Henri Grunevald. Numerical and experimental value added of Multi-Instrumented Technological Evaluator for the analysis of thick monolithic composite structures with singularity details
Composite Structures, Elsevier, 127, p.41--50
| [HAL] / [BIB] / [DOI] |
2015 |
S. Djebali, Stéphane Segonds, Jean-Max Redonnet, Walter Rubio. Using the global optimisation methods to minimise the machining path length of the free-form surfaces in three-axis milling
International Journal of Production Research, Taylor & Francis, 53(17), p.5296--5309
| [HAL] / [BIB] |
2014 |
Etienne Copin, Thierry Sentenac, Yannick Le Maoult, Fabien Blas, Florence Ansart, Vanessa Vidal, Philippe Lours. Feasibility of luminescent multilayer sol-gel thermal barrier coating manufacturing for future applications in through-thickness temperature gradient sensing
Surface and Coatings Technology, Elsevier, vol. 260, pp. 90-96
| [HAL] / [BIB] / [DOI] |
2014 |
Micheline Abbas, Pascale Magaud, Y. Gao, Sandrine Geoffroy. Migration of finite sized particles in a laminar square channel flow from low to high Reynolds numbers
Physics of Fluids, American Institute of Physics, 26(12), p.123301
| [HAL] / [BIB] / [DOI] |
2014 |
Ahmed Abbadi, Laurent Michel, Bruno Castanié. Experimental Analysis of Debonding of Skin/Stringer Interfaces under Cyclic Loading and Ageing
Advanced composites letters, Woodhead Publishing Limited, 23(6), p.142-148
| [HAL] / [BIB] / [DOI] |
2014 |
Jie Chen, Lucien Baldas, Stéphane Colin. Numerical study of thermal creep flow between two ratchet surfaces
Vacuum, Elsevier, 109, p.294 - 301
| [HAL] / [BIB] / [DOI] |
2014 |
Sébastien Seguy, Lionel Arnaud, Tamás Insperger. Chatter in interrupted turning with geometrical defects: an industrial case study
International Journal of Advanced Manufacturing Technology, Springer Verlag, 75(1-4), p.45-56
| [HAL] / [BIB] / [DOI] |
2014 |
Joseph Morlier, Hanno Niemann, Amir Shahdin. Topology optimization for robust damage localization using aggregated FRFs statistical criteria.
Journal of Applied Mechanics and Materials, 629, p.513-518
| [HAL] / [BIB] / [DOI] |
2014 |
Marc Budinger, Jean-Charles Passieux, Christian Gogu, Amine Fraj. Scaling-law-based metamodels for the sizing of mechatronic systems
Mechatronics, Elsevier, 24(7), p.775-787
| [HAL] / [BIB] / [DOI] |
2014 |
Jean Heutte, Michel Galaup, Catherine Pons Lelardeux, Pierre Lagarrigue, Fabien Fenouillet. Etude des déterminants psychologiques de la persistance dans l'usage d'un jeu sérieux : évaluation de l'environnement optimal d'apprentissage avec Mecagenius®
STICEF (Sciences et Technologies de l'Information et de la Communication pour l'Éducation et la Formation), ATIEF, 21, p.43
| [HAL] / [BIB] |
2014 |
Jean-Charles Maré. Friction modelling and simulation at system level - Considerations to load and temperature effects
Proceedings of the Institution of Mechanical Engineers, Part I: Journal of Systems and Control Engineering, SAGE Publications, 229(1), p.27-48
| [HAL] / [BIB] |
2014 |
Vincent Velay, H. Matsumoto, L. Sasaki, Vanessa Vidal. Investigation of the mechanical behaviour of Ti-6Al-4V alloy under hot forming conditions: Experiment and modelling
Materials Science and Engineering Technology / Materialwissenschaft und Werkstofftechnik, Wiley-VCH Verlag, 45(9), p. 847-853
| [HAL] / [BIB] / [DOI] |
2014 |
Lokman Bennani, Philippe Villedieu, Michel Salaün, Pierre Trontin. Numerical simulation and modeling of ice shedding: Process initiation
Computers & Structures, Elsevier, 142, p.15-27
| [HAL] / [BIB] / [DOI] |
2014 |
Rémi Gilblas, Thierry Sentenac, D. Hernandez, Yannick Le Maoult. Quantitative temperature field measurements on a non-gray multi-materials scene by thermoreflectometry
Infrared Physics and Technology, Elsevier, 66, p. 70-77
| [HAL] / [BIB] / [DOI] |
2014 |
Natthawat Hongkarnjanakul, Samuel Rivallant, Christophe Bouvet, Arturo Miranda. Permanent indentation characterization for low-velocity impact modelling using three-point bending test
Journal of Composite Materials, SAGE Publications, 48(20), p.2441-2454
| [HAL] / [BIB] / [DOI] |
2014 |
Vlasios Leontidis, Jie Chen, Lucien Baldas, Stéphane Colin. Numerical design of a Knudsen pump with curved channels operating in the slip flow regime
Heat and Mass Transfer, Springer Verlag, 50(8), p.1065 - 1080
| [HAL] / [BIB] / [DOI] |
2014 |
Jean-Charles Passieux, Pablo Navarro, Jean-Noël Périé, Steven Marguet, Jean-François Ferrero. A digital image correlation method for tracking planar motions of rigid spheres: application to medium velocity impacts
Experimental Mechanics, Society for Experimental Mechanics, 54(8), p.1453-1466
| [HAL] / [BIB] / [DOI] |
2014 |
Thomas Pottier, Guénaël Germain, Madalina Calamaz, Anne Morel, Dominique Coupard. Sub-millimeter measurement of finite strains at cutting tool tip vicinity
Experimental Mechanics, Society for Experimental Mechanics, 54(6), p.1031-1042
| [HAL] / [BIB] / [DOI] |
2014 |
Laurent Robert, Gilles Dusserre. Assessment of Thermoset Cure-Induced Strains by Fiber Bragg Grating Sensor
Polymer Engineering and Science, Wiley-Blackwell, 54(7), p. 1585-1594
| [HAL] / [BIB] / [DOI] |
2014 |
Simon Foucaud, Guilhem Michon, Yves Gourinat, Adrien Pelat, François Gautier. Artificial cochlea and acoustic black hole travelling waves observation: Model and experimental results
Journal of Sound and Vibration, Elsevier, vol. 333(n° 15), pp. 3428-3439
| [HAL] / [BIB] / [DOI] |
2014 |
Victor Achard, Christophe Bouvet, Bruno Castanié, Clément Chirol. Discrete ply modelling of open hole tensile tests
Composite Structures, Elsevier, vol. 113, pp. 369-381
| [HAL] / [BIB] / [DOI] |
2014 |
Jean-Philippe Crété, Patrice Longère, Jean-Marc Cadou. Numerical modelling of crack propagation in ductile materials combining the GTN model and X-FEM
Computer Methods in Applied Mechanics and Engineering, Elsevier, p.204-233
| [HAL] / [BIB] / [DOI] |
2014 |
Philippe Marguerès, Thierry Camps, Philippe Olivier. Impédancemétrie électrique pour le monitoring de composites carbone/époxy
Revue des composites et des matériaux avancés = Journal of Composite and Advanced Materials, IIETA, 24(2), p.207-220
| [HAL] / [BIB] / [DOI] |
2014 |
Raffaele d'Elia, Gérard Bernhart, Thierry Cutard, Gilles Peraudeau, Marianne Balat-Pichelin. Preliminary tests of silicon carbide based concretes for hybrid rocket nozzles in a solar furnace
Acta Astronautica, Elsevier, 99, p.242-251
| [HAL] / [BIB] / [DOI] |
2014 |
A. Ktari, M. Baccar, M. Shah, N. Haddar, H. F. Ayedi, Farhad Rezai-Aria. A crack propagation criterion based on Delta CTOD measured with 2D-digital image correlation technique
Fatigue and Fracture of Engineering Materials and Structures, Wiley-Blackwell, 37(6), p. 682-694
| [HAL] / [BIB] / [DOI] |
2014 |
Luis Agnaldo Gomes Perini, Jean-Charles Passieux, Jean-Noël Périé. A multigrid PGD-based algorithm for volumetric displacement fields measurements
Strain, Wiley-Blackwell, 50(4), p.355-367
| [HAL] / [BIB] / [DOI] |
2014 |
Samuel Rivallant, Christophe Bouvet, Elias Abi Abdallah, Bernhard Broll, Jean-Jacques Barrau. Experimental analysis of CFRP laminates subjected to Compression After Impact: the role of impact-induced cracks in failure
Composite Structures, Elsevier, vol. 111, pp. 147-157
| [HAL] / [BIB] / [DOI] |
2014 |
Benjamin Ostré, Christophe Bouvet, Frederic Lachaud, Clément Minot, Jacky Aboissière. Edge impact damage scenario on stiffened composite structure
Journal of Composite Materials, SAGE Publications, 42 p.
| [HAL] / [BIB] / [DOI] |
2014 |
Etienne Gourc, Guilhem Michon, Sébastien Seguy, Alain Berlioz. Experimental Investigation and Design Optimization of Targeted Energy Transfer Under Periodic Forcing
Journal of Vibration and Acoustics, American Society of Mechanical Engineers, 136(2), p.021021-8
| [HAL] / [BIB] / [DOI] |
2014 |
Pengcheng Cheng, Xiaojing Gong, Shahram Aivazzadeh, Xinran Xiao. Experimental observation of tensile behavior of patch repaired composites
Polymer Testing, Elsevier, 34, p.146-154
| [HAL] / [BIB] / [DOI] |
2014 |
Lisa Pin, Vanessa Vidal, Fabien Blas, Florence Ansart, Sandrine Duluard, Jean-Pierre Bonino, Yannick Le Maoult, Philippe Lours. Optimized sol–gel thermal barrier coatings for long-term cyclic oxidation life
Journal of the European Ceramic Society, Elsevier, vol. 34(n° 4), pp. 961-974
| [HAL] / [BIB] / [DOI] |
2014 |
Mohammed Cheikh, Alain Fermy. Prototype fretting device and some experimental results
Proceedings of the Institution of Mechanical Engineers, Part J: Journal of Engineering Tribology, SAGE Publications, 228(3), p.266-275
| [HAL] / [BIB] |
2014 |
Laurent Robert, Gilles Dusserre. Anisothermal thermosetting resin cure monitored by optical fiber refractometer
Polymer Engineering and Science, Wiley-Blackwell, 54(3), p. 626-635
| [HAL] / [BIB] / [DOI] |
2014 |
Tchadja Kagnaya, Laurence Lambert, Myriam Lazard, Christine Boher, Thierry Cutard. Investigation and FEA-based simulation of tool wear geometry and metal oxide effect on cutting process variables
Simulation Modelling Practice and Theory, Elsevier, 42(SI), p. 84-97
| [HAL] / [BIB] / [DOI] |
2014 |
Thomas Pottier, Hervé Louche, Serge Samper, Hugues Favreliěre, Franck Toussaint, Pierre Vacher. Proposition of a modal filtering method to enhance heat source computation within heterogeneous thermomechanical problems
International Journal of Engineering Science, Elsevier, 81, p.163 - 176
| [HAL] / [BIB] / [DOI] |
2014 |
Damien Busca, Marina Fazzini, Bernard Lorrain, Sébastien Mistou, Moussa Karama, Marie-Laetitia Pastor. High-Speed Stereo Digital Image Correlation: Application to Biaxial Fatigue
Strain, Wiley-Blackwell, 50(5), p.417-427
| [HAL] / [BIB] / [DOI] |
2014 |
Farid Medjedoub, Sabine Le Roux, Gilles Dour, Farhad Rezai-Aria. Effect of local stress on the heat-checking morphology in high temperature tool steels under thermal fatigue: Transition from multi-axiality to uniaxiality
Mechanics of Materials, Elsevier, 69(1), p. 159-172
| [HAL] / [BIB] / [DOI] |
2014 |
Tarek Merzouki, Eric Blond, Nicolas Schmitt, M. Bouchetou, Thierry Cutard, Alain Gasser. Modelling of the swelling induced by oxidation in SiC-based refractory castables
Mechanics of Materials, Elsevier, 68, p.68 (2014) 253-266
| [HAL] / [BIB] / [DOI] |
2014 |
Haris Ahmad Israr, Natthawat Hongkarnjanakul, Samuel Rivallant, Christophe Bouvet. Post-Impact Investigation of CFRP Laminated Plate
Jurnal Teknologi, 71(2), p.71-78
| [HAL] / [BIB] / [DOI] |
2014 |
Ihab El Sawi, Zouheir Fawaz, Redouane Zitoune, Habiba Bougherara. An investigation of the damage mechanisms and fatigue life diagrams of flax fiber-reinforced polymer laminates
Journal of Materials Science, Springer Verlag, 49(5), p.2338--2346
| [HAL] / [BIB] |
2014 |
Patrick Gilles, Guillaume Cohen, Frederic Monies, Walter Rubio. Machining strategy in five-axis milling using balance of the transversal cutting force
International Journal of Advanced Manufacturing Technology, Springer Verlag, 72(9), p.1377--1387
| [HAL] / [BIB] |
2014 |
Stéphane Colin, Gian Luca Morini, Juergen J. Brandner. Selected papers from the third European Conference on Microfluidics: µFlu'12
Microfluidics and Nanofluidics, Springer Verlag, 16(6), p.997-998
| [HAL] / [BIB] / [DOI] |
2014 |
Manuel Paredes, Romain Canivenc, Marc Sartor. Tolerance optimization by modification of Taguchi's robust design approach and considering performance levels
Application to the design of a cold-expanded bushing
Proceedings of the Institution of Mechanical Engineers, Part G: Journal of Aerospace Engineering, SAGE Publications, 228(8), p.1314--1323
| [HAL] / [BIB] |
2014 |
Isabelle Danis, Nathalie Wojtowicz, Frederic Monies, Pierre Lagarrigue. Influence of dry plunge-milling conditions on surface integrity of magnesium alloys
International Journal of Mechatronics and Manufacturing Systems, Inderscience, 7(2-3), p.141--156
| [HAL] / [BIB] |
2014 |
L. Sanches, Guilhem Michon, Alain Berlioz, D. Alazard. Response and instability prediction of helicopter dynamics on the ground
International Journal of Non-Linear Mechanics, Elsevier, 65, p.213--225
| [HAL] / [BIB] |
2014 |
Pablo Navarro, Julien Aubry, Florian Pascal, Steven Marguet, Jean-François Ferrero, Olivier Dorival. Influence of the stacking sequence and crack velocity on fracture toughness of woven composite laminates in mode I
Engineering Fracture Mechanics, Elsevier, 131, p.340-348
| [HAL] / [BIB] / [DOI] |
2014 |
Haris Ahmad Israr, Samuel Rivallant, Christophe Bouvet, Jean-Jacques Barrau. Finite element simulation of 0°/90° CFRP laminated plates subjected to crushing using a free-face-crushing concept
Composites Part A: Applied Science and Manufacturing, Elsevier, vol. 62, pp. 16-25
| [HAL] / [BIB] / [DOI] |
2014 |
Benoît Vieille, Victor Manuel Casado, Christophe Bouvet. Influence of matrix toughness and ductility on the compression-after-impact behavior of woven-ply thermoplastic- and thermosetting-composites: A comparative study
Composite Structures, Elsevier, vol. 110, pp. 207-218
| [HAL] / [BIB] / [DOI] |
2014 |
Elodie Cabrol, Christine Boher, Vanessa Vidal, Farhad Rezai-Aria, Fabienne Touratier. A wear damage assessment of high temperature forging tool
Advanced Materials Research, Trans Tech Publications, 966-967, p.103-110
| [HAL] / [BIB] / [DOI] |
2014 |
Marie Poitrimolt, Mohammed Cheikh, Gérard Bernhart, Vincent Velay. Characterisation of the transverse mechanical properties of carbon/carbon composites by spherical indentation
Carbon, Elsevier, 66, p. 234-245
| [HAL] / [BIB] / [DOI] |
2014 |
Emeline Bessard, Olivier de Almeida, Gérard Bernhart. Unified isothermal and non-isothermal modelling of neat PEEK crystallization
Journal of Thermal Analysis and Calorimetry, Springer Verlag, 115(2), p. 1669-1678
| [HAL] / [BIB] / [DOI] |
2014 |
Fazila Mohd Zawawi, Peng Lv, Sebastien Prothin, Joseph Morlier, Jean-Marc Moschetta, Emmanuel Bénard. Study of a flexible UAV proprotor
International Journal of Engineering Systems Modelling and Simulation, InderScience, 6(3/4), p.149-161
| [HAL] / [BIB] |
2014 |
Victor Pozzobon, Sylvain Salvador, Jean-Jacques Bézian, Mouna El-Hafi, Yannick Le Maoult, Gilles Flamant. Radiative pyrolysis of wet wood under intermediate heat flux: Experiments and modelling
Fuel Processing Technology, Elsevier, 128, p.319-330
| [HAL] / [BIB] / [DOI] |
2014 |
Ihab El Sawi, Habiba Bougherara, Redouane Zitoune, Zouheir Fawaz. Influence of the Manufacturing Process on the Mechanical Properties of Flax/Epoxy Composites
Journal of Biobased Materials and Bioenergy, 8(1), p.69--76
| [HAL] / [BIB] |
2014 |
Frederic Lachaud, Robert Piquet, Grégory Aldebert, Jacques Huet, Laurent Michel. Analyse du comportement mécanique des assemblages boulonnés composites à renforts tissés
Revue des composites et des matériaux avancés = Journal of Composite and Advanced Materials, IIETA, 24(4), p.449--464
| [HAL] / [BIB] |
2014 |
Tchadja Kagnaya, Christine Boher, Laurence Lambert, Myriam Lazard, Thierry Cutard. Microstructural analysis of wear micromechanisms of WC-6Co cutting tools during high speed dry machining
International Journal of Refractory Metals and Hard Materials, Elsevier, 42, p.151-162
| [HAL] / [BIB] / [DOI] |
2014 |
Robert Piquet, Frederic Lachaud, Soraya Catché, Bruno Castanié. Tolérance aux dommages de perçages dans les assemblages boulonnés composites
Revue des composites et des matériaux avancés = Journal of Composite and Advanced Materials, IIETA, 24(4), p.481--493
| [HAL] / [BIB] |
2014 |
Madjid Haddad, Redouane Zitoune, Florent Eyma, Bruno Castanié. Study of the surface defects and dust generated during trimming of CFRP: Influence of tool geometry, machining parameters and cutting speed range
Composites Part A: Applied Science and Manufacturing, Elsevier, 66, p.142--154
| [HAL] / [BIB] |
2014 |
Xuan Wang, Valérie Pommier-Budinger, Aurélien Reysset, Yves Gourinat. Simultaneous compensation of hysteresis and creep in a single piezoelectric actuator by open-loop control for quasi-static space active optics applications
Control Engineering Practice, Elsevier, 33, p.48--62
| [HAL] / [BIB] |
2014 |
Mehdi Chérif, Christophe Bois, Yann Landon. Rôle des défauts de perçage sur le comportement en matage des composites stratifiés sous sollicitation de fatigue
Revue des composites et des matériaux avancés = Journal of Composite and Advanced Materials, IIETA, 24(4), p.423--434
| [HAL] / [BIB] |
2014 |
Taha Benhaddou, Clément Chirol, Alain Daidié, Jean Guillot, Pierre Stéphan, Jean-Baptiste Tuery. Pre-tensioning effect on fatigue life of bolted shear joints
Aerospace Science and Technology, 36, p.36-43
| [HAL] / [BIB] / [DOI] |
2014 |
Tahiana Ramananantoandro, Pierre Larricq, Olivier Eterradossi. Relationships between 3D roughness parameters and visuotactile perception of surfaces of maritime pinewood and MDF
Holzforschung, 68(1), p.93--101
| [HAL] / [BIB] / [DOI] |
2014 |
Jérémy Crevel, Bertrand Lascoup. Etude du comportement de la protection foudre face à un impact mécanique. Study of the behaviour of the lightning protection under low velocity impact. Integrated function in composite materials
Revue des composites et des matériaux avancés = Journal of Composite and Advanced Materials, IIETA, 24(2)
| [HAL] / [BIB] / [DOI] |
2014 |
Julien Aubry, Pablo Navarro, Steven Marguet, Jean-François Ferrero, Olivier Dorival, Laurent Sohier, Jean-Yves Cognard. Change of scale strategy for the microstructural modelling of polymeric rohacell foams
CMC-Computers, Materials & Continua, Tech Science Press, p.21-47
| [HAL] / [BIB] / [DOI] |
2014 |
Redouane Zitoune, Elam Bouacif Belkacem S., Francis Collombet, Habiba Bouguerara. Optimization of twist drill geometry for drilling CFRP and multi-material made of CFRP/Al
International Journal of Materials, Mechanics and Manufacturing, 2(4)
| [HAL] / [BIB] |
2014 |
Julien Astoul, Emmanuel Mermoz, Marc Sartor, Jean Marc Linares, Alain Bernard. New methodology to reduce the transmission error of the spiral bevel gears
CIRP Annals, 63(1), p.165--168
| [HAL] / [BIB] |
2014 |
Redouane Zitoune, Cadorin Nicolas, Elam Bouacif Belkacem S, Francis Collombet, Krishnaraj V, Bougherara Habiba. Influence of the Double Cone Drill Geometry on the Holes Quality during Drilling Multi-Stack Made of CFRP/Al
International Journal of Materials, Mechanics and Manufacturing, 2(4), p.292--296
| [HAL] / [BIB] |
2014 |
Sylvain Dubreuil, Marc Berveiller, Frank Petitjean, Michel Salaün. Construction of bootstrap confidence intervals on sensitivity indices computed by polynomial chaos expansion
Reliability Engineering and System Safety, Elsevier, vol. 121, pp. 263-275
| [HAL] / [BIB] / [DOI] |
2014 |
Laura Balea, Gilles Dusserre, Gérard Bernhart. Mechanical behaviour of plain-knit reinforced injected composites : effect of inlay yarns and fibre type
Composites Part B: Engineering, Elsevier, 56, p.20-29
| [HAL] / [BIB] / [DOI] |
2014 |
Madjid Haddad, Redouane Zitoune, H. Bougherara, Florent Eyma, Bruno Castanié. Study of trimming damages of CFRP structures in function of the machining processes and their impact on the mechanical behavior
Composites Part B: Engineering, Elsevier, 57, p.136--143
| [HAL] / [BIB] |
2014 |
Victor Munoz Cuartas, Marianne Perrin, Marie-Laetitia Pastor, Hélène Welemane, Arthur Cantarel, Moussa Karama. Determination of the elastic properties in CFRP composites: comparison of different approaches based on tensile tests and ultrasonic characterization
Advances in Aircraft and Spacecraft Science, Techno-Press, vol. 2(n° 3), pp. 249-260
| [HAL] / [BIB] / [DOI] |
2014 |
Jean-Sébastien Brest, Vincent Keryvin, Patrice Longère, Yoshihiko Yokoyama. Insight into plasticity mechanisms in metallic glasses by means of a Brazilian test and numerical simulation
Journal of Alloys and Compounds, Elsevier, 586, p.S236-S241
| [HAL] / [BIB] |
2014 |
Valérie Pommier-Budinger, Marc Budinger. Sizing optimization of piezoelectric smart structures with meta-modeling techniques for dynamic applications
International Journal of Applied Electromagnetics and Mechanics, IOS Press
| [HAL] / [BIB] / [DOI] |
2014 |
Romuald Bertolaso, Mohammed Cheikh, Yoann Barranger, Jean-Christophe Dupré, Arnaud Germaneau, Pascal Doumalin. Experimental and numerical study of the load distribution in a ball-screw system
Journal of Mechanical Science and Technology, Springer, 28(4), p. 1411-1420
| [HAL] / [BIB] / [DOI] |
2014 |
Ahmed Jhinaoui, Laurent Mevel, Joseph Morlier. A new SSI algorithm for LPTV systems: application to a hinged-bladed helicopter
Mechanical Systems and Signal Processing, Elsevier, 42(1), p.152--166
| [HAL] / [BIB] / [DOI] |
2014 |
Mauricio Torres, Francis Collombet, Bernard Douchin, Laurent Crouzeix, Y-H. Grunevald. Comparison between the Classic Sensor Embedding Method and the Monitoring Patch Embedding Method for Composites Instrumentation
Applied Composite Materials, Springer Verlag (Germany), 21(5), p.707--724
| [HAL] / [BIB] / [DOI] |
2014 |
L. Peng, Xiaojing Gong, L. Guillaumat. Modélisation numérique de structures composites réparées par collage de patchs externes en traction
Revue des composites et des matériaux avancés = Journal of Composite and Advanced Materials, IIETA, 24(4/2014), p.465--479
| [HAL] / [BIB] |
2014 |
Florian Rigaud, M. Charlotte, Christelle Kerdreux, Pierre Maréchal. Multi-objective optimization of rotary-wing aircrafts at the predesign stage
Mechanics & Industry, EDP Sciences, 15(4), p.267-277
| [HAL] / [BIB] / [DOI] |
2014 |
Gilles Dusserre, Laura Balea, Gérard Bernhart. Elastic properties prediction of a knitted composite with inlaid yarns subjected to stretching
A coupled semi-analytical model
Composites Part A: Applied Science and Manufacturing, Elsevier, 64, p.185 - 193
| [HAL] / [BIB] / [DOI] |
2014 |
Stéphane Colin, Gian Luca Morini, Juergen J. Brandner. Selected papers from the 3rd European Conference on Microfluidics - μFlu'12
Experimental Heat Transfer, Taylor & Francis, 27(4), p.313--315
| [HAL] / [BIB] |
2013 |
Peng Lv, Fazila Mohd Zawawi, Emmanuel Bénard, Sebastien Prothin, Jean-Marc Moschetta, Joseph Morlier. An Application of Adaptive Blades on Convertible MAVs
International Journal of Micro Air Vehicles, SAGE, 5(4), p.229-243
| [HAL] / [BIB] / [DOI] |
2013 |
Jean-Charles Passieux, Julien Réthoré, Anthony Gravouil, Marie-Christine Baietto. Local/global non-intrusive crack propagation simulation using a multigrid X-FEM solver
Computational Mechanics, Springer Verlag, 52(6), p.1381-1393
| [HAL] / [BIB] / [DOI] |
2013 |
Victor Munoz, Marianne Perrin, Marie-Laetitia Pastor, Hélène Welemane, Arthur Cantarel, Moussa Karama. Application of non destructive testing to the detection of aeronautical defects in composite structure
Nonconventional Technologies Review
| [HAL] / [BIB] |
2013 |
Ludovic Barrière, Steven Marguet, Bruno Castanié, Philippe Cresta, Jean-Charles Passieux. An adaptive model reduction strategy for post-buckling analysis of stiffened structures
Thin-Walled Structures, Elsevier, 73, p.81-93
| [HAL] / [BIB] / [DOI] |
2013 |
Patrice Longère, Anne-Gaëlle Geffroy-Grèze, Bruno Leblé, André Dragon. Ship structure steel plate failure under near-field air-blast loading: Numerical simulations vs experiment
International Journal of Impact Engineering, Elsevier, 62, p.88-98
| [HAL] / [BIB] / [DOI] |
2013 |
Eric Vermesse, Catherine Mabru, Laurent Arurault. Surface integrity after pickling and anodization of Ti–6Al–4V titanium alloy
Applied Surface Science, Elsevier, vol. 285(Part B), pp. 629-637
| [HAL] / [BIB] / [DOI] |
2013 |
Amélie Kolopp, Samuel Rivallant, Christophe Bouvet. Experimental study of sandwich structures as armour against medium-velocity impacts
International Journal of Impact Engineering, Elsevier, vol. 61, pp. 24-35
| [HAL] / [BIB] / [DOI] |
2013 |
Cédric Bellot, Pascal Lamesle, Denis Delagnes. XRD Synchrotron Study of Carbide Precipitation in Martensitic Steels During Tempering
Acta Metallurgica Sinica, Springer Verlag, 26(5), p.553-557
| [HAL] / [BIB] / [DOI] |
2013 |
Stéphane Colin, Gian Luca Morini, Juergen Brandner, Paul Watts. Editorial
Journal of flow chemistry, Akademiai Kiado, 3(3), p.65-65
| [HAL] / [BIB] / [DOI] |
2013 |
Philippe Marguerès, Thierry Camps, Mathieu Viargues, Philippe Olivier. Preliminary experimental study on the electrical impedance analysis for in-situ monitoring of the curing of carbon/epoxy composite material for aeronautical and aerospace structures
Measurement Science and Technology, IOP Publishing, 24(9), p.095005
| [HAL] / [BIB] / [DOI] |
2013 |
Satish Kandlikar, Stéphane Colin, Yoav Peles, Srinivas Garimella, R. Fabian Pease, Juergen Brandner, David Tuckerman. Heat Transfer in Microchannels—2012 Status and Research Needs
Journal of Heat Transfer, American Society of Mechanical Engineers, 135(9), p.091001
| [HAL] / [BIB] / [DOI] |
2013 |
Cédric Bellot, Pascal Lamesle. Quantitative measurement of gamma prime precipitates in two industrial nickel-based superalloys using extraction and high resolution SEM imaging
Journal of Alloys and Compounds, Elsevier, 570, p.100-103
| [HAL] / [BIB] / [DOI] |
2013 |
Fabien Amiot, Michel Bornert, Pascal Doumalin, Jean-Christophe Dupré, Marina Fazzini, Jean-José Orteu, Christophe Poilâne, Laurent Robert, René Rotinat, Evelyne Toussaint, Bertrand Wattrisse, Jean Samuel Wienin. Assessment of Digital Image Correlation Measurement Accuracy in the Ultimate Error Regime: Main Results of a Collaborative Benchmark
Strain, Wiley-Blackwell, 49(6), p.483-496
| [HAL] / [BIB] / [DOI] |
2013 |
Xavier Giraud, Marc Sartor, Xavier Roboam, Bruno Sareni, Hubert Piquet, Marc Budinger, Sébastien Vial. Load allocation problem for optimal design of aircraft electrical power system
International Journal of Applied Electromagnetics and Mechanics, IOS Press, 43(1-2), p.1-13
| [HAL] / [BIB] / [DOI] |
2013 |
Renaud Gantois, Arthur Cantarel, Benoit Cosson, Gilles Dusserre, Jean-Noël Felices, Fabrice Schmidt. BEM-based models to simulate the resin flow at macroscale and microscale in LCM processes
Polymer Composites, Wiley, 34(8), p.1235-1244
| [HAL] / [BIB] / [DOI] |
2013 |
Belkacem Hachemane, Redouane Zitoune, Boudjema Bezzazi, Christophe Bouvet. Sandwich composites impact and indentation behaviour study
Composites Part B: Engineering, Elsevier, vol. 51, pp. 1-10
| [HAL] / [BIB] / [DOI] |
2013 |
J.-F. Couat, J. Cegarra, T. Rodsphon, T. Geeraerts, C. Lelardeux, J. Sol, Pierre Lagarrigue, V. Minville, V. Lubrano. A prospective video-based observational and analytical approach to evaluate management during brain tumour surgery at a university hospital
Neurochirurgie, Elsevier Masson, 59(4-5), p.142-148
| [HAL] / [BIB] |
2013 |
Sabine Le Roux, Farhad Rezai-Aria. Topological and metric properties of microscopic crack patterns: application to thermal fatigue of high temperature tool steels
Journal of Physics D: Applied Physics, IOP Publishing, 46(29)
| [HAL] / [BIB] / [DOI] |
2013 |
Benoît Vieille, Victor Manuel Casado, Christophe Bouvet. About the impact behavior of woven-ply carbon fiber-reinforced thermoplastic- and thermosetting-composites: A comparative study
Composite Structures, Elsevier, vol. 101, pp. 9-21
| [HAL] / [BIB] / [DOI] |
2013 |
Marc Budinger, Aurelien Reysset, Toufic El Halabi, Catalin Vasiliu, Jean-Charles Maré. Optimal preliminary design of electromechanical actuators
Proceedings of the Institution of Mechanical Engineers, Part G: Journal of Aerospace Engineering, SAGE Publications, 228(9), p.1598 - 1616
| [HAL] / [BIB] / [DOI] |
2013 |
Laurent Tapie, Bernardin Mawussi, Walter Rubio, Benoît Furet. Machining of complex-shaped parts with guidance curves
International Journal of Advanced Manufacturing Technology, Springer Verlag, 69(5), p.1499-1509
| [HAL] / [BIB] / [DOI] |
2013 |
Christian Garnier, Marie-Laetitia Pastor, Bernard Lorrain, Olivier Pantalé. Fatigue behaviour of impacted composite structures
Composite Structures, Elsevier, vol. 100, pp. 443-450
| [HAL] / [BIB] / [DOI] |
2013 |
Jean-Max Redonnet, Sonia Djebali, Stéphane Segonds, Johanna Senatore, Walter Rubio. Study of the effective cutter radius for end milling of free-form surfaces using a torus milling cutter
Computer-Aided Design, Elsevier, 45(6), p.951-962
| [HAL] / [BIB] / [DOI] |
2013 |
Pablo Navarro, Serge Abrate, Julien Aubry, Steven Marguet, Jean-François Ferrero. Analytical modeling of indentation of composite sandwich beam
Composite Structures, Elsevier, 100, p.79 - 88
| [HAL] / [BIB] / [DOI] |
2013 |
Stéphane Segonds, Jacques Masounave, Victor Songmene, Christian Bes. A simple analytical model for burr type prediction in drilling of ductile materials
Journal of Materials Processing Technology, Elsevier, 213(6), p.971-977
| [HAL] / [BIB] / [DOI] |
2013 |
Franck Diemer, Jérôme Michetti, Jean-Philippe Mallet, Robert Piquet. Effect of Asymmetry on the Behavior of Prototype Rotary Triple Helix Root Canal Instruments
Journal of Endodontics, Elsevier, 39(6), p.829 - 832
| [HAL] / [BIB] / [DOI] |
2013 |
Patrick Gilles, Guillaume Cohen, Frederic Monies, Walter Rubio. Torus cutter positioning in five-axis milling using balance of the transversal cutting force
International Journal of Advanced Manufacturing Technology, Springer Verlag, 66(5-8), p.965-973
| [HAL] / [BIB] / [DOI] |
2013 |
Yann Landon, Mehdi Cherif. Characterization of the Surface Quality of Holes Drilled in CFRP Laminates
Advanced Materials Research, Trans Tech Publications, 698, p.107-116
| [HAL] / [BIB] / [DOI] |
2013 |
Etienne Gourc, Sébastien Seguy, Guilhem Michon, Alain Berlioz. Chatter Control in Turning Process with a Nonlinear Energy Sink
Advanced Materials Research, Trans Tech Publications, 698, p.89-98
| [HAL] / [BIB] / [DOI] |
2013 |
Alvine Njionhou, Florentin Berthet, Bruno Castanié. Effects of process parameters on the mechanical properties and morphology of stitched and non-stitched carbon/epoxy liquid resin-infused NCF laminate, out of autoclave and out of oven
International Journal of Advanced Manufacturing Technology, Springer Verlag, 65(9-12), p.1289-1302
| [HAL] / [BIB] / [DOI] |
2013 |
Lisa Pin, Christopher Pilgrim, Jörg Feist, Yannick Le Maoult, Florence Ansart, Philippe Lours. Characterisation of thermal barrier sensor coatings synthesised by sol–gel route
Sensors and Actuators A: Physical, Elsevier, vol. 199, pp. 289-296
| [HAL] / [BIB] / [DOI] |
2013 |
Michel Chaussumier, Catherine Mabru, Majid Shahzad, Rémy Chieragatti, Farhad Rezai-Aria. A predictive fatigue life model for anodized 7050 aluminium alloy
International Journal of Fatigue, Elsevier, vol. 48, pp. 205-213
| [HAL] / [BIB] / [DOI] |
2013 |
L Jaeger, Christian Gogu, Stéphane Segonds. Aircraft Multidisciplinary Design Optimization Under Both Model and Design Variables Uncertainty
Journal of Aircraft, American Institute of Aeronautics and Astronautics, 50, p.528 - 538
| [HAL] / [BIB] / [DOI] |
2013 |
Irène Maillet, Laurent Michel, Germain Rico, Mathieu Fressinet, Yves Gourinat. A new test methodology based on structural resonance for mode I fatigue delamination growth in an unidirectional composite
Composite Structures, Elsevier, vol. 97, pp. 353-362
| [HAL] / [BIB] / [DOI] |
2013 |
Xavier Pessoles, Yann Landon, Stéphane Segonds, Walter Rubio. Optimisation of workpiece setup for continuous five-axis milling: application to a five-axis BC type machining centre
International Journal of Advanced Manufacturing Technology, Springer Verlag, 65(1-4), p.67-79
| [HAL] / [BIB] / [DOI] |
2013 |
Pauline Lepesant, Christine Boher, Yves Berthier, Farhad Rezai-Aria. A phenomenological model of the third body particles circulation in a high temperature contact
Wear, Elsevier, 298-299, p.66-79
| [HAL] / [BIB] / [DOI] |
2013 |
Philippe Marguerès, Fodil Meraghni. Damage induced anisotropy and stiffness reduction evaluation in composite materials using ultrasonic wave transmission
Composites Part A: Applied Science and Manufacturing, Elsevier, 45, p.134-144
| [HAL] / [BIB] / [DOI] |
2013 |
Michel Mousseigne, Yann Landon, Sébastien Seguy, Gilles Dessein, Jean-Max Redonnet. Predicting the dynamic behaviour of torus milling tools when climb milling using the stability lobes theory
International Journal of Machine Tools and Manufacture, Elsevier, 65, p.47-57
| [HAL] / [BIB] / [DOI] |
2013 |
Gilles Dusserre, F. Nazaret, Laurent Robert, Thierry Cutard. Applicability of image correlation techniques to characterise asymmetric refractory creep during bending tests
Journal of the European Ceramic Society, Elsevier, 33(2), p.221-231
| [HAL] / [BIB] / [DOI] |
2013 |
Lisa Pin, Florence Ansart, Jean-Pierre Bonino, Yannick Le Maoult, Vanessa Vidal, Philippe Lours. Reinforced sol-gel thermal barrier coatings and their cyclic oxidation life
Journal of the European Ceramic Society, Elsevier, vol. 33, pp. 269-276
| [HAL] / [BIB] / [DOI] |
2013 |
Haris Ahmad Israr, Samuel Rivallant, Jean-Jacques Barrau. Experimental investigation on mean crushing stress characterization of carbon-epoxy plies under compressive crushing mode
Composite Structures, Elsevier, vol. 96, p.357-364
| [HAL] / [BIB] / [DOI] |
2013 |
Teddy Lisle, Christophe Bouvet, Marie-Laetitia Pastor, Philippe Marguerès, Roberto Prieto Corral. Damage analysis and fracture toughness evaluation in a thin woven composite laminate under static tension using infrared thermography
Composites Part A: Applied Science and Manufacturing, Elsevier, vol. 53, pp. 75-87
| [HAL] / [BIB] / [DOI] |
2013 |
John Le Dref, Florent Eyma, Gilles Dessein, Louis Etienne Denaud, Yann Landon. Comparative study of tools in drilling composites T700-M21 and T800-M21
Advanced Materials Research, Trans Tech Publications, vol. 698, pp. 59-68
| [HAL] / [BIB] / [DOI] |
2013 |
Thierry Sentenac, Rémi Gilblas. Noise effect on the interpolation equation for near infrared thermography
Metrologia, IOP Publishing, 50(3), p.208-218
| [HAL] / [BIB] / [DOI] |
2013 |
Patrice Longère, André Dragon. Description of shear failure in ductile metals via back stress concept linked to damage-microporosity softening
Engineering Fracture Mechanics, Elsevier, 98, p.92-108
| [HAL] / [BIB] / [DOI] |
2013 |
T. Benmbarek, Laurent Robert, H. Sammouda, Bertrand Charrier, Jean-José Orteu, Françoise Hugot. Effect of acetylation and additive on the tensile properties of wood fiber-high-density polyethylene composite
Journal of Reinforced Plastics and Composites, SAGE Publications, 32(21), p.1646-1655
| [HAL] / [BIB] / [DOI] |
2013 |
Julien Astoul, Jérôme Geneix, Emmanuel Mermoz, Marc Sartor. A simple and robust method for spiral bevel gear generation and tooth contact analysis
Int J Interact Des Manuf, 7(1), p.37--49
| [HAL] / [BIB] / [DOI] |
2013 |
Jacques Harvent, Benjamin Coudrin, Ludovic Brèthes, Jean-José Orteu, Michel Devy. Multi-view dense 3D modelling of untextured objects from a moving projector-cameras system
Machine Vision and Applications, Springer Verlag, 24(8), p.1645-1659
| [HAL] / [BIB] / [DOI] |
2013 |
Marie-Cécile Robin, Denis Delagnes, Roland E. Logé, Pierre-Olivier Bouchard, Stéphanie da Costa, Mauricio Monteagudo-Galindo, Vincent Velay. Thermo-mechanical fatigue behaviour of welded tubular parts made of ferritic stainless steel
International Journal of Fatigue, Elsevier, 54, p.84 - 98
| [HAL] / [BIB] / [DOI] |
2013 |
Christine Lafforgue-Baldas, Pascale Magaud, Philippe Schmitz, Zhang Zhihao, Sandrine Geoffroy, Micheline Abbas. Study of Microfocusing Potentialities to Improve Bioparticle Separation Processes: Towards an Experimental Approach
Journal of flow chemistry, Akademiai Kiado, 3(3), p.92-98
| [HAL] / [BIB] / [DOI] |
2013 |
Michel Bornert, Fabrice Brémand, Pascal Doumalin, Jean-Christophe Dupré, Marina Fazzini, Michel Grediac, François Hild, Sébastien Mistou, Jérôme Molimard, Jean-José Orteu, Laurent Robert, Yves Surrel, Pierre Vacher, Bertrand Wattrisse. Addendum to: Assessment of Digital Image Correlation Measurement Errors: Methodology and Results [Experimental Mechanics 49(3)]
Experimental Mechanics, Society for Experimental Mechanics, page 1
| [HAL] / [BIB] / [DOI] |
2013 |
Redouane Zitoune, N. Cadorin, Bruno Castanié, M. Sève. Perçage d’un matériau composite tissé 3D : Influence des conditions d’usinage et de l’usure de l’outil sur les efforts de coupe et la qualité d’usinage
Revue des composites et des matériaux avancés = Journal of Composite and Advanced Materials, IIETA, 23(3), p.387--404
| [HAL] / [BIB] |
2013 |
François Cénac, Redouane Zitoune, Francis Collombet, Michel Deleris. Abrasive Water-Jet milling of aeronautic aluminum 2024-T3
Proceedings of the IMechE, 227(3), p.29--37
| [HAL] / [BIB] / [DOI] |
2013 |
Redouane Zitoune, M. El Mansori, V. Krishnaraj. Tribo-functional Design of Double Cone Drill Implications in Tool Wear During Drilling of Copper mesh/CFRP/Woven ply
Wear, Elsevier, 302(1-2), p.1560--1567
| [HAL] / [BIB] / [DOI] |
2013 |
L. Jaeger, Christian Gogu, Stéphane Segonds, Christian Bes. Aircraft Multidisciplinary Design Optimization under both Model and Design Variables Uncertainty
Journal of Aircraft, 50(2), p.528--538
| [HAL] / [BIB] / [DOI] |
2013 |
Stéphane Segonds, J. Masounave, V. Songmene, Christian Bes. A simple analytical model for burr type prediction in drilling of ductile materials.
Journal of Materials Processing Technology, Elsevier, 213(6), p.971--977
| [HAL] / [BIB] / [DOI] |
2013 |
Stéphane Segonds, Christian Bes, Frederic Monies, Jean-Max Redonnet. Variability influence of machining context on tool tips wear estimation - Application to dry turning of 42CrMo4 steel
International Journal of Manufacturing Research, 8(3), p.277 -- 295
| [HAL] / [BIB] / [DOI] |
2013 |
Amélie Kolopp, Raquel Alvarado, Samuel Rivallant, Christophe Bouvet. Modeling impact on aluminium sandwich including velocity effects in honeycomb core
Journal of Sandwich Structures and Materials, SAGE Publications, 13(6), p.733-757
| [HAL] / [BIB] / [DOI] |
2013 |
Emmanuel Mermoz, Julien Astoul, Marc Sartor, Jean-Marc Linares, Alain Bernard. A new methodology to optimize spiral bevel gear topography
CIRP Annals - Manufacturing Technology, Elsevier, 62, p.119 - 122
| [HAL] / [BIB] / [DOI] |
2013 |
Anthony Delmas, Yannick Le Maoult, Jean-Marie Buchlin, Thierry Sentenac, Jean-José Orteu. Shape distortions induced by convective effect on hot object in visible, near infrared and infrared bands
Experiments in Fluids, Springer Verlag (Germany), 54(4), p.1452
| [HAL] / [BIB] / [DOI] |
2013 |
Sabine Le Roux, Farid Medjedoub, Gilles Dour, Farhad Rezai-Aria. Image analysis of microscopic crack patterns applied to thermal fatigue heat-checking of high temperature tool steels
Micron, Elsevier, 44, p.347-358
| [HAL] / [BIB] / [DOI] |
2013 |
R. Gras, H. Leclerc, S. Roux, S. Otin, J. Schneider, Jean-Noël Périé. Identification of the Out-of-Plane Shear Modulus of a 3D Woven Composite
Exp Mech, 53(5), p.719--730
| [HAL] / [BIB] / [DOI] |
2013 |
Elodie Cabrol, Cédric Bellot, Pascal Lamesle, Denis Delagnes, E. Povoden-Karadeniz. Experimental investigation and thermodynamic modeling of molybdenum and vanadium-containing carbide hardened iron-based alloys
Journal of Alloys and Compounds, Elsevier, 556, p.203-209
| [HAL] / [BIB] / [DOI] |
2013 |
Francis Collombet, Laurent Crouzeix, F. Cénac, Y.-H. Grunevald, Yves Davila, A. Cerisier, Bernard Douchin. Usinage par jet d’eau abrasif pour la réparation de pièces composites primaires aéronautiques
Revue des composites et des matériaux avancés = Journal of Composite and Advanced Materials, IIETA, 23(3), p.459--482
| [HAL] / [BIB] / [DOI] |
2013 |
Christian Gogu, Jean-Charles Passieux. Efficient surrogate construction by combining response surface methodology and reduced order modeling
Structural and Multidisciplinary Optimization, Springer Verlag (Germany), 47(6), p.821-837
| [HAL] / [BIB] / [DOI] |
2013 |
A. Nafi, Mohammed Cheikh, O. Mercier. Identification of mechanical properties of CuSil-steel brazed structures joints: a numerical approach
Journal of Adhesion Science and Technology, Taylor & Francis, 27(24), p.2705-2713
| [HAL] / [BIB] / [DOI] |
2013 |
Sabine Le Roux, Farid Medjedoub, Gilles Dour, Farhad Rezai-Aria. Role of heat‐flux density and mechanical loading on the microscopic heat‐checking of high temperature tool steels under thermal fatigue experiments
International Journal of Fatigue, Elsevier, 51, p.15-25
| [HAL] / [BIB] / [DOI] |
2013 |
Eric Paroissien, Fréderic Gaubert, A. da Veiga, Frederic Lachaud. Elasto-plastic analysis of bonded joints with macro-elements
Journal of Adhesion Science and Technology, Taylor & Francis, vol. 27, pp. 1464-1498
| [HAL] / [BIB] / [DOI] |
2013 |
Pierre Selva, Olivier Cherrier, Valérie Pommier-Budinger, Frederic Lachaud, Joseph Morlier. Smart monitoring of aeronautical composites plates based on electromechanical impedance measurements and artificial neural networks
Engineering Structures, Elsevier, 56, p.794-804
| [HAL] / [BIB] / [DOI] |
2013 |
Guilhem Michon, A. Almajid, G. Aridon. Soft Hollow Particle Damping Identification in Honeycomb Structures
Journal of Sound and Vibration, Elsevier, 332(3), p.536--544
| [HAL] / [BIB] / [DOI] |
2013 |
L. Sanches, Guilhem Michon, Alain Berlioz, Daniel Alazard. Helicopter Ground Resonance Phenomenon With Blade Stiffness Dissimilarities: Experimental and Theoretical Developments
J. Vib. Acoust, 135(5), p.051028--051028--7
| [HAL] / [BIB] / [DOI] |
2013 |
Florence Pettinari-Sturmel, B. Kedjar, Joël Douin, Christophe Gatel, Denis Delagnes, Armand Coujou. TEM study of structural hardening in a new martensitic steel for aeronautic application
Materials Science and Engineering: A, Elsevier, 576, p.290-297
| [HAL] / [BIB] / [DOI] |
2013 |
Olivier Cherrier, Pierre Selva, Valérie Pommier-Budinger, Frederic Lachaud, Joseph Morlier. Damage localization map using electromechanical impedance spectrums and inverse distance weighting interpolation: Experimental validation on thin composite structures
Structural Health Monitoring, SAGE Publications (UK and US), 12(4), p.311-324
| [HAL] / [BIB] / [DOI] |
2013 |
Manuel Paredes. Analytical and Experimental Study of Conical Telescoping Springs With Nonconstant Pitch. Etude analytique et expérimentale de ressorts coniques télescopiques avec pas non constant
Journal of Mechanical Design MONTH, 135-9, p.1-8
| [HAL] / [BIB] |
2013 |
Hakim Abdulhamid, Amélie Kolopp, Christophe Bouvet, Samuel Rivallant. Experimental and numerical study of AA5086-H111 aluminum plates subjected to impact
International Journal of Impact Engineering, Elsevier, 51, p.1-12
| [HAL] / [BIB] / [DOI] |
2013 |
Karin Faria Pinho, Christine Boher, Cherlio Scandian. Effect of molybdenum and chromium contents on sliding wear of high-chromium white cast iron at high temperature
Lubrication Science, Wiley, 25(2), p.153-162
| [HAL] / [BIB] / [DOI] |
2013 |
F. Alkatan, J. Andriamampianina, Pierre Stéphan, J. Guillot. Flexibility of hybrid load transfer assemblies: Influence of tightening pre-stress
Aerospace Science and Technology, 25(1), p.84--92
| [HAL] / [BIB] / [DOI] |
2013 |
M. Saleem, L. Toubal, Redouane Zitoune, H. Bougherara. Investigating the effect of machining processes on the mechanical behaviour of composite plates with circular holes
Composites Part A: Applied Science and Manufacturing, Elsevier, 55, p.169--177
| [HAL] / [BIB] / [DOI] |
2013 |
Madjid Haddad, Redouane Zitoune, Florent Eyma, Bruno Castanié. Machinability and surface quality during high speed trimming of multi directional CFRP
International Journal of Machining and Machinability of Materials, Inderscience, 13(2/3), p.289
| [HAL] / [BIB] / [DOI] |
2013 |
Johanna Senatore, Kamel Moussaoui, Stéphane Segonds, Frédéric Moniès, Walter Rubio. Analysis of drift in iso-scallop planning – Machining by regions
International Journal of Advanced Manufacturing Technology, Springer Verlag, 67(1-4), p.719--732
| [HAL] / [BIB] / [DOI] |
2013 |
Cédric Pozzolini, Yves Renard, Michel Salaün. Vibro-impact of a plate on rigid obstacles: existence theorem, convergence of a scheme and numerical simulations
IMA Journal of Numerical Analysis, Oxford University Press (OUP), vol. 33, pp. 261 -294
| [HAL] / [BIB] / [DOI] |
2013 |
Arnaud Duchosal, Frédéric Deschaux-Beaume, Philippe Lours, Sergio Haro, Gilles Fras. Analysis of weld-cracking and improvement of the weld-repair process of superplastic forming tools
Materials & Design, Elsevier, 46, p.731-739
| [HAL] / [BIB] / [DOI] |
2013 |
Kamel Moussaoui, Michel Mousseigne, Johanna Senatore, Pierre Lagarrigue, Yves Caumel. Influence of milling on surface integrity of Ti-6Al-4V
Advanced Materials Research, Trans Tech Publications, 698, p.127--137
| [HAL] / [BIB] / [DOI] |
2013 |
Thomas Rouault, Christophe Bouvet, Vincent Nègre, Patrice Rauch. Reversible Rail Shear Apparatus Applied to the Study of Woven Laminate Shear Behavior
Experimental Mechanics, Society for Experimental Mechanics, 53(8), p.1437-1448
| [HAL] / [BIB] / [DOI] |
2013 |
Khalil Ben Slima, Luc Penazzi, Catherine Mabru, François Ronde Oustau. Fatigue analysis-based numerical design of stamping tools made of cast iron
International Journal of Advanced Manufacturing Technology, Springer Verlag
| [HAL] / [BIB] / [DOI] |
2013 |
Badis Haddag, Tchadja Kagnaya, Mohammed Nouari, Thierry Cutard. A new heat transfer analysis in machining based on two steps of 3D finite element modelling and experimental validation
Heat and Mass Transfer, Springer Verlag, 49(1), p.129--145
| [HAL] / [BIB] / [DOI] |
2013 |
Lijian Wang, Jean-Charles Maré. A Force Equalization Controller for Active/Active Redundant Actuation System Involving Servo-hydraulic and Electro-mechanical Technologies
Proceedings of the Institution of Mechanical Engineers, Part G: Journal of Aerospace Engineering, 228(10), p.1768--1787
| [HAL] / [BIB] / [DOI] |
2013 |
S. Almabouacif, K. Vijayan, Redouane Zitoune. An investigation on cutting forces and hole quality on drilling of multimaterial. Statistical and experimental analysis
Revue des composites et des matériaux avancés = Journal of Composite and Advanced Materials, IIETA, 23(3), p.437--457
| [HAL] / [BIB] |
2013 |
Natthawat Hongkarnjanakul, Christophe Bouvet, Samuel Rivallant. Validation of low velocity impact modelling on different stacking sequences of CFRP laminates and influence of fibre failure
Composite Structures, Elsevier, vol. 106, pp. 549-559
| [HAL] / [BIB] / [DOI] |
2013 |
Samuel Rivallant, Christophe Bouvet, Natthawat Hongkarnjanakul. Failure analysis of CFRP laminates subjected to Compression After Impact: FE simulation using discrete interface elements
Composites Part A: Applied Science and Manufacturing, Elsevier, vol. 55, pp. 83-93
| [HAL] / [BIB] / [DOI] |
2013 |
Leonardo Sanches, Daniel Alazard, Guilhem Michon, Alain Berlioz. Robustness Analysis of Helicopter Ground Resonance with Parametric Uncertainties in Blade Properties
Journal of Guidance, Control, and Dynamics, American Institute of Aeronautics and Astronautics, 36(1), p.272-281
| [HAL] / [BIB] / [DOI] |
2013 |
Elodie Péronnet, Marie-Laetitia Pastor, Richard Huillery, Olivier Dalverny, Sebastien Mistou, Moussa Karama, Sylvain Génot. Non destructive investigation of defects in composite structures by fullfield measurement methods
Key Engineering Materials, Trans Tech Publications, vol. 550, pp. 135-142
| [HAL] / [BIB] / [DOI] |
2012 |
Thierry Sentenac, Rémi Gilblas, Daniel Hernandez, Yannick Le Maoult. Bi-color near infrared thermoreflectometry: A method for true temperature field measurement
Review of Scientific Instruments, American Institute of Physics, 83(12)
| [HAL] / [BIB] / [DOI] |
2012 |
Emmanuel Marin, Laurent Robert, Sébastien Triollet, Youcef Ouerdane. Liquid Resin Infusion process monitoring with superimposed Fibre Bragg Grating sensor
Polymer Testing, Elsevier, 31(8), p.1045-1052
| [HAL] / [BIB] / [DOI] |
2012 |
Ihab El Sawi, Philippe Olivier, Philippe Demont, Habiba Bougherara. Processing and electrical characterization of a unidirectional CFRP composite filled with double walled carbon nanotubes
Composites Science and Technology, Elsevier, vol. 73, pp. 19-26
| [HAL] / [BIB] / [DOI] |
2012 |
Ihab El Sawi, Philippe Olivier, Philippe Demont, Habiba Bougherara. Investigation of the effect of double-walled carbon nanotubes on the curing reaction kinetics and shear flow of an epoxy resin
Journal of Applied Polymer Science, Wiley, vol. 126, p.358-366
| [HAL] / [BIB] / [DOI] |
2012 |
J. Liscouët, Jean-Charles Maré, Marc Budinger. An integrated methodology for the preliminary design of highly reliable electromechanical actuators: Search for architecture solutions
Aerospace Science and Technology, Elsevier, 22(1), p.9 - 18
| [HAL] / [BIB] / [DOI] |
2012 |
Pablo Navarro, Steven Marguet, Jean-François Ferrero, Jean-Jacques Barrau, Sandrine Lemaire. Modeling of Impacts on Sandwich Structures
Mechanics of Advanced Materials and Structures, Taylor & Francis, 19(7), p.523 - 529
| [HAL] / [BIB] / [DOI] |
2012 |
Louis Adam, Christophe Bouvet, Bruno Castanié, Alain Daidié, Elodie Bonhomme. Discrete ply model of circular pull-through test of fasteners in laminates
Composite Structures, Elsevier, vol. 94, pp. 3082-3091
| [HAL] / [BIB] / [DOI] |
2012 |
Cyril Renault, Jérôme Roche, Mihaela Raluca Ciumag, Théodore Tzedakis, Stéphane Colin, Karine Serrano, Olivier Reynes, Christiane André-Barrès, Peter Winterton. Design and optimization of electrochemical microreactors for continuous electrosynthesis
Journal of Applied Electrochemistry, Springer Verlag, vol. 42, pp. 667-677
| [HAL] / [BIB] / [DOI] |
2012 |
Vincent Velay, Thierry Cutard, N. Guegan. Thermal behaviour modelling of superplastic forming tools. Modellierung des thermischen verhaltens von superplastischen umformwerkzeugen
Materials Science and Engineering Technology / Materialwissenschaft und Werkstofftechnik, Wiley-VCH Verlag, 43(9, SI), p.799-804
| [HAL] / [BIB] / [DOI] |
2012 |
Issam Tawk, Julien Aubry, Pablo Navarro, Jean-François Ferrero, Steven Marguet, Samuel Rivallant, Sandrine Lemaire, Patrice Rauch. Study of impact on helicopter blade
Engineering Failure Analysis, Elsevier, 24, p.38-45
| [HAL] / [BIB] / [DOI] |
2012 |
Aurélien Mazzoni, Gérard Bernhart, Thierry Cutard. Ceramic fibre reinforced refractory castables for very high temperature superplastic forming
Materials Science and Engineering Technology / Materialwissenschaft und Werkstofftechnik, Wiley-VCH Verlag, 43(9, SI), p.758-762
| [HAL] / [BIB] / [DOI] |
2012 |
M. Cusick, F. Abu-Farha, Philippe Lours, Yannick Le Maoult, Gérard Bernhart, M. Khraisheh. Superplastic forming of AZ31 magnesium alloy with controlled microstructure
Materials Science and Engineering Technology / Materialwissenschaft und Werkstofftechnik, Wiley-VCH Verlag, 43(9, SI), p.810-816
| [HAL] / [BIB] / [DOI] |
2012 |
Jérémie Lasry, Yves Renard, Michel Salaün. Stress intensity factors computation for bending plates with extended finite element method
International Journal for Numerical Methods in Engineering, Wiley, vol. 91, pp. 909-928
| [HAL] / [BIB] / [DOI] |
2012 |
Masood Shah, Catherine Mabru, Farhad Rezai-Aria, Inès Souki, Riffat Asim Pasha. An estimation of stress intensity factor in a clamped SE(T) specimen through numerical simulation and experimental verification: case of FCGR of AISI H11 tool steel
ACTA METALLURGICA SINICA‐ENGLISH LETTERS, 25(4), p.307-319
| [HAL] / [BIB] / [DOI] |
2012 |
Manuel Paredes, Naoufel Nefissi, Marc Sartor. Study of an interference fit fastener assembly by finite element modelling, analysis and experiment
International Journal on Interactive Design and Manufacturing, Springer Verlag, 6(3), p.171-177
| [HAL] / [BIB] / [DOI] |
2012 |
M. Charlotte, Lev Truskinovsky. Lattice dynamics from a continuum viewpoint
Journal of the Mechanics and Physics of Solids, Elsevier, 60(8), p.1508-1544
| [HAL] / [BIB] / [DOI] |
2012 |
Louis Adam, Alain Daidié, Bruno Castanié, Elodie Bonhomme. Application of high-performance computing to a bolt static tensile test
International Journal on Interactive Design and Manufacturing, Springer Verlag, 6(3), p.195-203
| [HAL] / [BIB] / [DOI] |
2012 |
Leonardo Sanches, Guilhem Michon, Alain Berlioz, Daniel Alazard. Parametrically excited helicopter ground resonance dynamics with high blade asymmetries
Journal of Sound and Vibration, Elsevier, vol. 331, pp. 3897-3913
| [HAL] / [BIB] / [DOI] |
2012 |
Mauricio Torres Arellano, Laurent Crouzeix, Francis Collombet, Bernard Douchin, Yves-Henri Grunevald. Mechanical Characterization of an Alternative Technique to Embed Sensors in Composite Structures: The Monitoring Patch
Applied Composite Materials, Springer Verlag (Germany), 19(3-4), p.379-391
| [HAL] / [BIB] / [DOI] |
2012 |
Pablo Navarro, Aubry Julien, Steven Marguet, Jean-François Ferrero, Sandrine Lemaire, Patrice Rauch. Semi-continuous approach for the modeling of thin woven composite panels applied to oblique impacts on helicopter blades
Composites Part A: Applied Science and Manufacturing, Elsevier, 43(6), p.871-879
| [HAL] / [BIB] / [DOI] |
2012 |
Arjan Frijns, Dimitris Valougeorgis, Stéphane Colin, Lucien Baldas. 1st European Conference on Gas Micro Flows (GasMems 2012)
Journal of Physics: Conference Series, IOP Science, 362, p.011001
| [HAL] / [BIB] / [DOI] |
2012 |
Laurent Crouzeix, Jean-Noël Périé, Francis Collombet, Bernard Douchin. Identification of a macroscopic anisotropic damage model using digital image correlation and the equilibrium gap method
Revue Européenne de Mécanique Numérique/European Journal of Computational Mechanics, Hermès / Paris : Lavoisier, 19(1-3), p.229 - 240
| [HAL] / [BIB] / [DOI] |
2012 |
Pablo Navarro, Julien Aubry, Steven Marguet, Jean-François Ferrero, Sandrine Lemaire, Patrice Rauch. Experimental and numerical study of oblique impact on woven composite sandwich structure: Influence of the firing axis orientation
Composite Structures, Elsevier, 94(6), p.1967 - 1972
| [HAL] / [BIB] / [DOI] |
2012 |
Marc Budinger, Jonathan Liscouët, Fabien Hospital, Jean-Charles Maré. Estimation models for the preliminary design of electromechanical actuators
Proceedings of the Institution of Mechanical Engineers, Part G: Journal of Aerospace Engineering, SAGE Publications, 226(3), p.243-259
| [HAL] / [BIB] / [DOI] |
2012 |
Eduard Marenić, Jurica Soric, Zdenko Tonkovic. Nano-submodelling technique based on overlapping domain decomposition method
Transactions of FAMENA, University of Zagreb, Faculty of Mechanical Engineering and Naval Architecture, 36(1), p.1-12
| [HAL] / [BIB] |
2012 |
Etienne Gourc, Sébastien Seguy, Gilles Dessein. Dynamical modeling of spindle with active magnetic bearing for milling process
Advanced Materials Research, Trans Tech Publications, 423, p.200-209
| [HAL] / [BIB] / [DOI] |
2012 |
Cyril Renault, Stéphane Colin, Stéphane Orieux, Patrick Cognet, Théodore Tzedakis. Optimal design of multi-channel microreactor for uniform residence time distribution
Microsystem Technologies, Springer Verlag, 18(2), p.209 - 223
| [HAL] / [BIB] / [DOI] |
2012 |
Stéphane Colin, Gian Luca Morini, Bernd Michel. Selected papers from the 2nd European conference on microfluidics: μFlu’10
Microsystem Technologies, Springer Verlag, 18(2), p.149-150
| [HAL] / [BIB] / [DOI] |
2012 |
Pierre Kerfriden, Jean-Charles Passieux, Stephane Pierre-Alain Bordas. Local/global model order reduction strategy for the simulation of quasi-brittle fracture
International Journal for Numerical Methods in Engineering, Wiley, 89(2), p.154-179
| [HAL] / [BIB] / [DOI] |
2012 |
Johanna Senatore, Stéphane Segonds, Walter Rubio, G. Dessein. Correlation between machining direction, cutter geometry and step-over distance in 3-axis milling: Application to milling by zones.
Computer-Aided Design, Elsevier, 44(12), p.1151-1160
| [HAL] / [BIB] / [DOI] |
2012 |
Olivier Cherrier, V. Pommier-Budinger, F. Simon. Panel of resonators with variable resonance frequency for noise control
Applied Acoustics, Elsevier, 73(8), p.781--790
| [HAL] / [BIB] / [DOI] |
2012 |
Pierre Stéphan, F. Mathurin, J. Guillot. Experimental study of forming and tightening processes with thread forming screws
Journal of Materials Processing Technology, Elsevier, 212(4), p.766--775
| [HAL] / [BIB] / [DOI] |
2012 |
Manuel Paredes. Letter to the editor
Shock and Vibration, 19(6), p.1181--1183
| [HAL] / [BIB] / [DOI] |
2012 |
Stéphane Colin, G.L. Morini. Editorial: Selected papers from the 2nd European Conference on Microfluidics - μFlu’10
International Journal of Microscale and Nanoscale Thermal and Fluid Transport Phenomena, 3(1), p.1--3
| [HAL] / [BIB] |
2012 |
Jean-Charles Passieux, Jean-Noël Périé. High resolution digital image correlation using proper generalized decomposition: PGD-DIC
International Journal for Numerical Methods in Engineering, Wiley, 92(6), p.531-550
| [HAL] / [BIB] / [DOI] |
2012 |
Vincent Cazajus, Sébastien Seguy, Hélène Welemane, Moussa Karama. Residual stresses in a ceramic-metal composite
Applied Mechanics and Materials, Trans Tech Publications, 146, p.185-196
| [HAL] / [BIB] / [DOI] |
2012 |
Hejer Makhloufi, Françoise Rey, André Ferrand. Contribution to the modelling of a cross-country skier skiing in its environment
Mechanics & Industry, EDP Sciences, 13(2), p.127--136
| [HAL] / [BIB] / [DOI] |
2012 |
V. Krishnaraj, A. Prabukarthi, A. Ramanathan, N. Elanghovan, M.S. Kumar, Redouane Zitoune, J.P. Davim. Optimization of machining parameters at high speed drilling of carbon fiber reinforced plastic (CFRP) laminates
Composites Part B: Engineering, Elsevier, 43(4), p.1791--1799
| [HAL] / [BIB] / [DOI] |
2012 |
Christophe Paris, Gérard Bernhart, Philippe Olivier, Olivier de Almeida. Influence de cycles de cuisson rapides sur le préimprégné aéronautique M21/T700 : suivi de polymérisation et propriétés mécaniques
Matériaux & Techniques, EDP Sciences, 100(6-7), p.611-622
| [HAL] / [BIB] |
2012 |
T. Reytier, Christian Bes, P. Marechal, M. Bianciardi, A. Santgerma. Generation of correlated stress time histories from continuous turbulence Power Spectral Density for fatigue analysis of aircraft structures
International Journal of Fatigue, Elsevier, 42, p.147--152
| [HAL] / [BIB] / [DOI] |
2012 |
L. Peng, Xiaojing Gong, K. Wong, L. Guillaumat. Application of cohesive-zone models to delamination behaviour of composite material
World Journal of Engineering, Emerald Publishing Limited, 9(2), p.109--118
| [HAL] / [BIB] |
2012 |
A. Mir, B. Bezzazi, Redouane Zitoune, Francis Collombet. STUDY OF MECHANICAL AND HYGROTHERMAL PROPERTIES OF AGGLOMERATED CORK
Mechanika, Kaunas University of Technology, 18(1), p.40--45
| [HAL] / [BIB] / [DOI] |
2012 |
J. Andriamampianina, F. Alkatan, Pierre Stéphan, J. Guillot. Determining load distribution between the different rows of fasteners of a hybrid load transfer bolted joint assembly
Aerospace Science and Technology, 23(1), p.312--320
| [HAL] / [BIB] / [DOI] |
2012 |
Fazila Mohd Zawawi, Joseph Morlier, Gilles Grondin, Jean-Marc Moschetta. Design of Optimum Torsionally Flexible PropRotors for Tilt-Body MAVs
Applied Mechanics and Materials, Trans Tech Publications, 225, p.281-286
| [HAL] / [BIB] / [DOI] |
2012 |
Cédric Bellot, Denis Delagnes, Pascal Lamesle. Developing cementite-free martensitic steels : a new route to improve the ultimate tensile strength-fracture toughness balance
Matériaux & Techniques, EDP Sciences, 100(Hors-Série), p.76-78
| [HAL] / [BIB] |
2012 |
Christine Boher, Sabine Le Roux, Luc Penazzi, C. Dessain. Experimental investigation of the tribological behavior and wear mechanisms of tool steel grades in hot stamping of a high-strength boron steel
Wear, Elsevier, 294, p.286-295
| [HAL] / [BIB] / [DOI] |
2012 |
V. Keryvin, J.-S. Brest, Patrice Longère, A. Anguet. Pressure sensitivity of plasticity in metallic glasses below glass transition: a literature review
Materials Science Forum, Trans Tech Publications Inc., 706-709, p.1318--1323
| [HAL] / [BIB] / [DOI] |
2012 |
Christophe Bouvet, Samuel Rivallant, Jean-Jacques Barrau. Low velocity impact modeling in composite laminates capturing permanent indentation
Composites Science and Technology, Elsevier, 72(16), p.1977-1988
| [HAL] / [BIB] / [DOI] |
2012 |
Redouane Zitoune, V. Krishnaraj, S. Almabouacif, Francis Collombet, M. Sima, A. Jolin. Influence of machining parameters and new nano-coated tool on drilling performance of CFRP/Aluminium sandwich
Composites Part B: Engineering, Elsevier, 43(3), p.1480--1488
| [HAL] / [BIB] / [DOI] |
2012 |
Laurent Robert, Vincent Velay, Nicolas Decultot, Souleymane Ramde. Identification of hardening parameters using finite element models and full-field measurements: some case studies
Journal of Strain Analysis for Engineering Design, SAGE Publications, 47(1), p.3-17
| [HAL] / [BIB] / [DOI] |
2012 |
Stéphane Colin. Gas microflows in the slip flow regime: A critical review on convective heat transfer
Journal of Heat Transfer, American Society of Mechanical Engineers, 134(2), p.020908
| [HAL] / [BIB] / [DOI] |
2012 |
Laurent Crouzeix, F. Cenac, Francis Collombet, Redouane Zitoune, Y.-H. Grunevald, M. Déléris. Comportement d’une réparation en escalier obtenue par Jet d’Eau Abrasif
Matériaux & Techniques, 100(6-7), p.681--690
| [HAL] / [BIB] / [DOI] |
2012 |
Alvine Njionhou, Florentin Berthet, Bruno Castanié, Christophe Bouvet. Relationships between LRI process parameters and impact and post-impact behaviour of stitched and unstitched NCF laminates
Applied Composite Materials, Springer Verlag (Germany), vol. 19, pp. 885-899
| [HAL] / [BIB] / [DOI] |
2012 |
Jean-Charles Maré. Friction modelling and simulation at system level: a practical view for the designer
Proceedings of the Institution of Mechanical Engineers, Part I: Journal of Systems and Control Engineering, SAGE Publications, 226(6), p.728--741
| [HAL] / [BIB] / [DOI] |
2012 |
Hugo Leclerc, Jean-Noël Périé, François Hild, Stéphane Roux. Digital volume correlation: what are the limits to the spatial resolution?
Mechanics & Industry, EDP Sciences, 13, p.361-371
| [HAL] / [BIB] / [DOI] |
2012 |
N. Lebaal, S. Puissant, Fabrice Schmidt, D. Schlaefli. An optimization method with experimental validation for the design of extrusion wire coating dies for a range of different materials and operating conditions
Polymer Engineering and Science, Wiley-Blackwell, 52(12), p.2675-2687
| [HAL] / [BIB] / [DOI] |
2012 |
Christian Gogu, Youchun Qiu, Stéphane Segonds, Christian Bes. Optimization based algorithms for uncertainty propagation through functions with multidimensional output within evidence theory
Journal of Mechanical Design, American Society of Mechanical Engineers, 134(10), p. 914
| [HAL] / [BIB] / [DOI] |
2012 |
E. Péronnet, Florent Eyma, H. Welemane, C. Pescay. Characterization and comparison of defects detection limits of three ultrasonic non destructive methods
EPJ Web of Conferences, 6, p.79--88
| [HAL] / [BIB] / [DOI] |
2012 |
Yann Goueffon, Grégory Aldebert, Catherine Mabru, Laurent Arurault, Claire Tonon, Pascale Guigue. Flaking of black anodic films in space environment: Ageing and numerical simulation
Mechanics of Materials, Elsevier, 45, p.72-82
| [HAL] / [BIB] / [DOI] |
2012 |
Majid Shahzad, Michel Chaussumier, Rémy Chieragatti, Catherine Mabru, Farhad Rezai-Aria. Effect of sealed anodic film on fatigue performance of 2214-T6 aluminium alloy
Surface and Coatings Technology, Elsevier, vol. 206, p.2733-2739
| [HAL] / [BIB] |
2012 |
Camelia Demian, Sophie Costil, Pierre Sallamand, Adriana Soveja, Hanlin Liao, Simone Mattei. Laser densification of organic coating: Effects of laser wavelength, operating parameters and substrate properties
Surface and Coatings Technology, Elsevier, 206, p.3526--3533
| [HAL] / [BIB] / [DOI] |
2012 |
Cédric Bellot, Denis Delagnes, Pascal Lamesle. Mécanismes de précipitation dans les aciers martensitiques au carbone : caractérisation par DRX synchrotron et simulation thermocinétique
Matériaux & Techniques, EDP Sciences, 100(Hors-Série), p.117-118
| [HAL] / [BIB] |
2012 |
Sabine Le Roux, Christine Boher, Luc Penazzi, C. Dessain, B. Tavernier. A methodology and new criteria to quantify the adhesive and abrasive wear damage on a die radius using white light profilometry
Tribology International, Elsevier, 52, p.40-49
| [HAL] / [BIB] / [DOI] |
2012 |
Eduard Marenić, Jurica Soric, Adnan Ibrahimbegovic. Adaptive modelling in atomistic-to-continuum multiscale methods
Journal of the serbian society for computational mechanics, 6(1), p.169-198
| [HAL] / [BIB] |
2012 |
Guillaume Cohen, Patrick Gilles, Stéphane Segonds, Michel Mousseigne, Pierre Lagarrigue. Thermal and mechanical modeling during dry turning operations
International Journal of Advanced Manufacturing Technology, Springer Verlag, 58(1-4), p.133-140
| [HAL] / [BIB] / [DOI] |
2012 |
Xavier Pessoles, Jean-Max Redonnet, Stéphane Segonds, Michel Mousseigne. Modelling and optimising the passage of tangency discontinuities in NC linear paths
Int J Adv Manuf Technol, 58(5-8), p.631--642
| [HAL] / [BIB] / [DOI] |
2012 |
Pierre Rahmé, Christophe Bouvet, Samuel Rivallant, Valia Fascio, Guy Valembois. Experimental investigation of impact on composite laminates with protective layers
Composites Science and Technology, Elsevier, 72(2), p.182-189
| [HAL] / [BIB] / [DOI] |
2012 |
Sriram Pattabhiraman, Christian Gogu, Nam H. Kim, Raphael T Haftka, Christian Bes. Skipping unnecessary structural airframe maintenance using an on-board structural health monitoring system
Proceedings of the Institution of Mechanical Engineers, Part O: Journal of Risk and Reliability, SAGE Publications, 226(5), p.549--560
| [HAL] / [BIB] / [DOI] |
2012 |
Louis Denaud, Laurent Bleron, Florent Eyma, Rémy Marchal. Wood peeling process monitoring: a comparison of signal processing methods to estimate veneer average lathe check frequency
European Journal of Wood and Wood Products, Springer Verlag, 70(1-3), p.253-261
| [HAL] / [BIB] |
2012 |
Mikael Perrut, Marie-Helene Mathon, Denis Delagnes. Small-angle neutron scattering of multiphase secondary hardening steels
Journal of Materials Science, Springer Verlag, 47(4), p.1920-1929
| [HAL] / [BIB] / [DOI] |
2012 |
Denis Delagnes, Florence Pettinari-Sturmel, M. H. Mathon, Raphaële Danoix, Frédéric Danoix, Cédric Bellot, Pascal Lamesle, A. Grellier. Cementite-free martensitic steels: A new route to develop high strength/high toughness grades by modifying the conventional precipitation sequence during tempering
Acta Materialia, Elsevier, 60(16), p.5877-5888
| [HAL] / [BIB] / [DOI] |
2011 |
Lisa Pin, Florence Ansart, Jean-Pierre Bonino, Yannick Le Maoult, Vanessa Vidal, Philippe Lours. Processing, repairing and cyclic oxidation behaviour of sol-gel thermal barrier coatings
Surface and Coatings Technology, Elsevier, vol. 206, pp. 1609-1614
| [HAL] / [BIB] / [DOI] |
2011 |
Javier Toral-Vasquez, Bruno Castanié, Jean-Jacques Barrau, Nicolas Swiergiel. Multi-level analysis of low-cost Z-pinned composite joints: Part 2 : Joint Behavior
Composites Part A: Applied Science and Manufacturing, Elsevier, 42(12), p.2082-2092
| [HAL] / [BIB] |
2011 |
Frédéric Danoix, Raphaële Danoix, J. Akre, A. Grellier, Denis Delagnes. Atom probe tomography investigation of assisted precipitation of secondary hardening carbides in a medium carbon martensitic steels
Journal of Microscopy, Wiley, 244(3), p.305-310
| [HAL] / [BIB] / [DOI] |
2011 |
Etienne Gourc, Sébastien Seguy, Lionel Arnaud. Chatter milling modeling of active magnetic bearing spindle in high-speed domain
International Journal of Machine Tools and Manufacture, Elsevier, 51(12), p.928-936
| [HAL] / [BIB] / [DOI] |
2011 |
Eduard Marenić, Jurica Sorić, Zdenko Tonković. Numerical modeling of atomistic-to-continuum coupling based on bridging domain method
PAMM, Wiley-VCH Verlag, 11(1), p.539-540
| [HAL] / [BIB] / [DOI] |
2011 |
Thibault Gouache, Christopher Brunskill, Gregory Scott, Yves Gourinat, Pierre Coste, Yang Gao. Regolith simulant preparation methods for hardware testing
Planetary and Space Science, Elsevier, 58(14-15), p.1977-1984
| [HAL] / [BIB] / [DOI] |
2011 |
Laurent Benezech, Yann Landon, Walter Rubio. Study of Manufacturing Defects and Tool Geometry Optimisation for Multi-Material Stack Drilling
Advanced Materials Research, Trans Tech Publications, 423, p.1-11
| [HAL] / [BIB] / [DOI] |
2011 |
Franck Diemer, Eric Balguerie, Lucas van Der Sluis. Sealer Penetration and Adaptation in the Dentinal Tubules: A Scanning Electron Microscopic Study
Journal of Endodontics, Elsevier, 37(11), p.1576 - 1579
| [HAL] / [BIB] / [DOI] |
2011 |
Gilles Dusserre, Gérard Bernhart, Fabrice Schmidt, Gilles Dour. Evaluation of viscous and elastic parameters of a borosilicate glass above transition temperature using optical instrumented squeeze tests
Journal of Non-Newtonian Fluid Mechanics, Elsevier, 166(21-22), p.1229-1238
| [HAL] / [BIB] / [DOI] |
2011 |
Solene Tadier, Nadine Le Bolay, Sophie Girod Fullana, Sophie Cazalbou, Cédric Charvillat, Michel Labarrère, Daniel Boitel, Christian Rey, Christèle Combes. Co-grinding significance for calcium carbonate-calcium phosphate mixed cement. Part II: effect on cement properties
Journal of Biomedical Materials Research Part B: Applied Biomaterials, Wiley, 99B(2), p.302-312
| [HAL] / [BIB] / [DOI] |
2011 |
Muhammad Rizwan Shad, Guilhem Michon, Alain Berlioz. Nonlinear Dynamics of Rotors due to Large Deformations and Shear Effects
Applied Mechanics and Materials, Trans Tech Publications, 110-116, p.3593-3599
| [HAL] / [BIB] / [DOI] |
2011 |
Patrice Longère, Anne-Gaëlle Geffroy, Bruno Leblé, André Dragon. Modeling the Transition between Dense Metal and Damaged (Microporous) Metal Viscoplasticity
International Journal of Damage Mechanics, SAGE Publications, 21(7), p.1020-1063
| [HAL] / [BIB] / [DOI] |
2011 |
Cédric Pozzolini, Michel Salaün. SOME ENERGY CONSERVATIVE SCHEMES FOR VIBRO-IMPACTS OF A BEAM ON RIGID OBSTACLES
ESAIM: Mathematical Modelling and Numerical Analysis, EDP Sciences, vol. 45, p.1163-1192
| [HAL] / [BIB] / [DOI] |
2011 |
Benjamin Coudrin, Michel Devy, Jean-José Orteu, Ludovic Brèthes. An innovative hand-held vision-based digitizing system for 3D modelling
Optics and Lasers in Engineering, Elsevier, 49(9-10), p.1168-1176
| [HAL] / [BIB] / [DOI] |
2011 |
Leonardo Sanches, Guilhem Michon, Alain Berlioz, Daniel Alazard. Instability zones for isotropic and anisotropic multibladed rotor configurations.
Mechanism and Machine Theory, Elsevier, 46(8), p.1054-1065
| [HAL] / [BIB] / [DOI] |
2011 |
Patrick Gilles, Johanna Senatore, Stéphane Segonds, Frederic Monies, Walter Rubio. Determination of angular fields outside low and high collisions to mill free-form surfaces on 5-axis CNC Machines
International Journal of Production Research, Taylor & Francis
| [HAL] / [BIB] / [DOI] |
2011 |
Renaud Gantois, Arthur Cantarel, Gilles Dusserre, Jean Noel Félices, Fabrice Schmidt. Mold Filling Simulation of Resin Transfer Molding Combining BEM and Level Set Method
Applied Mechanics and Materials, Trans Tech Publications, 62, p.57-65
| [HAL] / [BIB] / [DOI] |
2011 |
Adrien Perret, Sebastien Mistou, Louis Etienne Denaud, Thierry Molle, Claudia Veyrac, Moussa Karama. Numerical modelling of a composite fuselage manufactured by liquid resin infusion
Applied Mechanics and Materials, Trans Tech Publications, vol. 62, pp.49-56
| [HAL] / [BIB] / [DOI] |
2011 |
Madjid Haddad, Yves Gourinat, M. Charlotte. Equivalence Theory Applied to Anisotropic Thin Plates
Engineering, Scientific Research, 3(7), p.669-679
| [HAL] / [BIB] / [DOI] |
2011 |
Rizwan Shad, Guilhem Michon, Alain Berlioz. Modeling and analysis of nonlinear rotordynamics due to higher order deformations in bending
Applied Mathematical Modelling, Elsevier, 35(5), p.2145-2159
| [HAL] / [BIB] / [DOI] |
2011 |
Sébastien Seguy, Tamás Insperger, Lionel Arnaud, Gilles Dessein, Grégoire Peigné. Suppression of period doubling chatter in high-speed milling by spindle speed variation
Machining Science and Technology, Taylor & Francis, 15(2), p.153-171
| [HAL] / [BIB] / [DOI] |
2011 |
Jean-José Orteu, Florian Bugarin, J. Harvent, Laurent Robert, Vincent Velay. Multiple-Camera Instrumentation of a Single Point Incremental Forming Process Pilot for Shape and 3D Displacement Measurements: Methodology and Results
Experimental Mechanics, Society for Experimental Mechanics, 51(4), p.625-639
| [HAL] / [BIB] / [DOI] |
2011 |
Patrice Longère, A.-G. Geffroy, B. Leblé. Fracture analysis and constitutive modelling of ship structure steel behaviour regarding explosion
Engineering Failure Analysis, Elsevier, 18(2), p.670-681
| [HAL] / [BIB] / [DOI] |
2011 |
Abderrahim Michrafy, Harona Diarra, John A. Dodds, Mohammed Michrafy, Luc Penazzi. Analysis of strain stress state in roller compaction process
Powder Technology, Elsevier, 208(2, SI), p.417-422
| [HAL] / [BIB] / [DOI] |
2011 |
Aline Sinan, Marie Georgelin-Gurgel, Franck Diemer. Evaluation of the preparation of the coronal part of the mesial canals of lower molars
Odonto - Stomatologie Tropical = Tropical Dental Journal, APIDPM Santé tropicale
| [HAL] / [BIB] |
2011 |
Zhang Zhanping, Denis Delagnes, Gérard Bernhart. Cyclic behaviour and plastic strain memory effect of 55NiCrMoV7 steel under low cycle fatigue
Rare Metals, Springer Verlag, 30(1, SI), p.443-446
| [HAL] / [BIB] / [DOI] |
2011 |
Jonathan Liscouët, Marc Budinger, Stéphane Orieux, Jean-Charles Maré. Modelling approach for the Simulation-Based Preliminary Design of Power Transmissions
Mechanism and Machine Theory, Elsevier, 46(3), pp. 276-289
| [HAL] / [BIB] / [DOI] |
2011 |
Benoit Cosson, Fabrice Schmidt, Yannick Le Maoult, Maxime Bordival. Infrared heating stage simulation of semi-transparent media (PET) using ray tracing method
International Journal of Material Forming, Springer Verlag, 4(1), p.1-10
| [HAL] / [BIB] / [DOI] |
2011 |
Matthieu Bizeul, Christophe Bouvet, Jean-Jacques Barrau, Rémy Cuenca. Fatigue crack growth in thin notched woven glass composites under tensile loading. Part I: experimental
Composites Science and Technology, Elsevier, 71(3), p.289-296
| [HAL] / [BIB] / [DOI] |
2011 |
Lionel Arnaud, Oscar Gonzalo, Sébastien Seguy, Haritz Jauregi, Grégoire Peigné. Simulation of low rigidity part machining applied to thin-walled structures
International Journal of Advanced Manufacturing Technology, Springer Verlag, 54(5-8), p.479-488
| [HAL] / [BIB] / [DOI] |
2011 |
Pierre Rahmé, Yann Landon, Frederic Lachaud, Robert Piquet, Pierre Lagarrigue. Analytical models of composite material drilling
International Journal of Advanced Manufacturing Technology, Springer Verlag, 52(5-8), p.609-617
| [HAL] / [BIB] / [DOI] |
2011 |
Dimitri Bettebghor, Nathalie Bartoli, Stéphane Grihon, Joseph Morlier, Manuel Samuelides. Surrogate modeling approximation using a mixture of experts based on EM joint estimation
Structural and Multidisciplinary Optimization, Springer Verlag (Germany), 43(2), p.243-259
| [HAL] / [BIB] / [DOI] |
2011 |
Majid Shahzad, Michel Chaussumier, Rémy Chieragatti, Catherine Mabru, Farhad Rezai-Aria. Surface characterization and influence of anodizing process on fatigue life of Al 7050 alloy
Materials & Design, Elsevier, 32(6), p.3328-3335
| [HAL] / [BIB] / [DOI] |
2011 |
Julien Sniezewski, Philippe Lours, Yannick Le Maoult. Buckling and spalling failure of alumina grown by oxidation on ODS FeCrAl alloys
Materials at High Temperatures, Taylor and Francis, 28(1), p.17-20
| [HAL] / [BIB] / [DOI] |
2011 |
T. Gouache, Y. Gao, P. Coste, Yves Gourinat. First experimental investigation of dual reciprocating drilling in planetary regoliths : proposition of penetration mechanics
Planetary and Space Science, Elsevier, 59(13), p.1529--1541
| [HAL] / [BIB] / [DOI] |
2011 |
Gilles Dusserre, Eric Jourdain, Gérard Bernhart. Effect of deformation on knitted glass preform in-plane permeability
Polymer Composites, Wiley, 32(1), p.18-28
| [HAL] / [BIB] / [DOI] |
2011 |
Amir Shahdin, Joseph Morlier, Laurent Mezeix, Christophe Bouvet, Yves Gourinat. Evaluation of the impact resistance of various composite sandwich beams by vibration tests
Shock and Vibration, IOS Press, 18(6), p.789-805
| [HAL] / [BIB] / [DOI] |
2011 |
Jérôme Limido, Christine Espinosa, Michel Salaün, Catherine Mabru, Rémy Chieragatti, Jean-Luc Lacome. Metal cutting modelling SPH approach
International Journal of Machining and Machinability of Materials, Inderscience, 9(3-4), p.177-196
| [HAL] / [BIB] / [DOI] |
2011 |
T. Zhu, M. A. Sutton, N. Li, Jean-José Orteu, Nicolas Cornille, Xiaojian Li, A. P. Reynolds. Quantitative Stereovision in a Scanning Electron Microscope
Experimental Mechanics, Society for Experimental Mechanics, 51(1), p.97-109
| [HAL] / [BIB] / [DOI] |
2011 |
Francisco Javier Campa, Luis Norberto López de Lacalle, Gorka Urbicain, Aitzol Lamikiz, Sébastien Seguy, Lionel Arnaud. Critical thickness and dynamic stiffness for chatter avoidance in thin floors milling
Advanced Materials Research, Trans Tech Publications, 188, p.116-121
| [HAL] / [BIB] / [DOI] |
2011 |
Hugo Leclerc, Jean-Noël Périé, Stéphane Roux, François Hild. Voxel-Scale Digital Volume Correlation
Experimental Mechanics, Society for Experimental Mechanics, 51(4), p.479-490
| [HAL] / [BIB] / [DOI] |
2011 |
Pierre Rahmé, Yann Landon, Pierre Lagarrigue, Frederic Lachaud, Robert Piquet. Drilling thick composite materials using large diameter drills
International Journal of Machining and Machinability of Materials, Inderscience, 10(3), p.202
| [HAL] / [BIB] / [DOI] |
2011 |
O. Bourrion, C. Bernard, D. Bondoux, J.L. Bouly, J. Bouvier, B. Boyer, M. Brinet, M. Buenerd, G. Damieux, L. Derome, L. Eraud, R. Foglio, D. Fombaron, D. Grondin, M.H. Lee, L. Lutz, M. Marton, A. Menchaca-Rocha, A. Pelissier, Jean-Noël Périé, A. Putze, S. Roudier, Y. Sallaz-Damaz, E.S. Seo, J.P. Scordilis, Y.S. Yoon. Design and construction of a Cherenkov imager for charge measurement of nuclear cosmic rays
Journal of Instrumentation, IOP Publishing, 6, p.P06004
| [HAL] / [BIB] / [DOI] |
2011 |
Tchadja Kagnaya, Myriam Lazard, Laurence Lambert, Christine Boher, Thierry Cutard. Temperature evolution in a WC-6% Co cutting tool during turning machining : experiment and finite element simulations
WSEAS Transactions on Heat and Mass Transfer, World Scientific and Engineering Academy and Society (WSEAS), 6(3), p.71-80
| [HAL] / [BIB] |
2011 |
Christian Garnier, Marie-Laetitia Pastor, Florent Eyma, Bernard Lorrain. The detection of aeronautical defects in-situ on composite structures using Non Destructive Testing
Composite Structures, Elsevier, vol. 93, pp. 1328-1336
| [HAL] / [BIB] / [DOI] |
2011 |
Talel Ben Mbarek, Laurent Robert, Francoise Hugot, Jean-José Orteu. Mechanical behavior of wood-plastic composites investigated by 3D digital image correlation
Journal of Composite Materials, SAGE Publications, 45(26), p.2751-2764
| [HAL] / [BIB] / [DOI] |
2011 |
Pierre Stéphan, F. Mathurin, J. Guillot. Analytical study of maximal tapping torque during forming screw process
Journal of Materials Processing Technology, Elsevier, 211(2), p.212--221
| [HAL] / [BIB] / [DOI] |
2011 |
Javier Toral-Vasquez, Bruno Castanié, Jean-Jacques Barrau, Nicolas Swiergiel. MULTI-LEVEL ANALYSIS OF LOW-COST Z-PINNED COMPOSITE JUNCTIONS. PART 1 : SINGLE Z-PIN BEHAVIOR
Composites Part A: Applied Science and Manufacturing, Elsevier, 42(12), p.2070-2081
| [HAL] / [BIB] / [DOI] |
2011 |
Jeong Sik Kim, Luciana Arronche, Anaïs Farrugia, Anastasia Muliana, Valeria La Saponara. Multi-scale modeling of time-dependent response of smart sandwich constructions
Composite Structures, Elsevier, 93(9), p.2196-2207
| [HAL] / [BIB] / [DOI] |
2011 |
P. Cheng, Xiaojing Gong, D. Hearn, A. Shahram. Tensile behaviour of patch-repaired CFRP laminates
Composite Structures, Elsevier, 93(2), p.582--589
| [HAL] / [BIB] / [DOI] |
2011 |
Redouane Zitoune, Laurent Crouzeix, Francis Collombet, T. Tamine, Y.H. Grunevald. Behaviour of composite plates with drilled and moulded hole under tensile load
Composite Structures, Elsevier, 93(9), p.2384--2391
| [HAL] / [BIB] / [DOI] |
2011 |
R. Torres, J. Chaptal, Christian Bes, Jean-Baptiste Hiriart-Urruty. Optimal, Environmentally Friendly Departure Procedures for Civil Aircraft
Journal of Aircraft, American Institute of Aeronautics and Astronautics, 48(1), p.11--22
| [HAL] / [BIB] / [DOI] |
2011 |
Muhammad Rizwan Shad, Guilhem Michon, Alain Berlioz. Analytical study of the dynamic behavior of geometrically nonlinear shaft-disk rotor systems
Mechanics & Industry, EDP Sciences, 12(6), p.433--443
| [HAL] / [BIB] / [DOI] |
2011 |
Xiaojing Gong, H. G. Gia, X. Xiao. Strength prediction of a triaxially braided composite
Composites Part A: Applied Science and Manufacturing, Elsevier, 42(8), p.1000--1006
| [HAL] / [BIB] / [DOI] |
2011 |
Fabrice Schmidt, Nicolas Pirc, Marcel Mongeau, Francisco Chinesta. Efficient Mold Cooling Optimization by Using Model Reduction
International Journal of Material Forming, Springer Verlag, 4(1), p.73-82
| [HAL] / [BIB] / [DOI] |
2011 |
R. Torres, Christian Bes. Uncertainty Tolerance of Multiobjective Environmentally Friendly Departure Procedures for Civil Aircraft
Journal of Aircraft, 48(6), p.2169--2172
| [HAL] / [BIB] / [DOI] |
2011 |
Jamel Madiouli, Jalila Sghaier, Jean-José Orteu, Laurent Robert, Didier Lecomte, Habib Sammouda. Non-contact Measurement of the Shrinkage and Calculation of Porosity During the Drying of Banana
Drying Technology, Taylor & Francis, 29(12), p.358-1364
| [HAL] / [BIB] / [DOI] |
2011 |
Sébastien Triollet, Laurent Robert, Emmanuel Marin, Youcef Ouerdane. Discriminated measures of strain and temperature in metallic specimen with embedded superimposed long and short fibre Bragg Gratings
Measurement Science and Technology, IOP Publishing, 22(1), p.015202
| [HAL] / [BIB] / [DOI] |
2011 |
Matthieu Bizeul, Christophe Bouvet, Jean-Jacques Barrau, Rémy Cuenca. Fatigue crack growth in thin notched woven glass composites under tensile loading. Part II: modelling
Composites Science and Technology, Elsevier, 71(3), p.297-305
| [HAL] / [BIB] / [DOI] |
2011 |
Sawsane Nakouzi, Johann Pancrace, Fabrice Schmidt, Yannick Le Maoult, Florentin Berthet. Simulations of an Infrared Composite Curing Process
Advanced Engineering Materials, Wiley-VCH Verlag, 13(7), p.604-608
| [HAL] / [BIB] / [DOI] |
2011 |
Amir Shahdin, Joseph Morlier, Hanno Niemann, Yves Gourinat. Correlating low energy impact damage with changes in modal parameters: diagnosis tools and FE validation
Structural Health Monitoring, SAGE Publications (UK and US), 10(2), p.199-217
| [HAL] / [BIB] / [DOI] |
2011 |
Mouldi Ben Azzouna, Jean-Noël Périé, Jean-Mathieu Guimard, François Hild, Stéphane Roux. On the Identification and Validation of an Anisotropic Damage Model Using Full-field Measurements
International Journal of Damage Mechanics, SAGE Publications, 20, p.1130-1150
| [HAL] / [BIB] / [DOI] |
2010 |
Walid Trabelsi, Laurent Michel, Renaud Othomene. Effects of stitching on delamination of satin weave carbon-epoxy laminates under mode I, mode II and mixed-mode I/II loadings
Applied Composite Materials, Springer Verlag (Germany), 17(6), p.575-595
| [HAL] / [BIB] / [DOI] |
2010 |
Yann Goueffon, Catherine Mabru, Michel Labarrère, Laurent Arurault, Claire Tonon, Pascale Guigue. Investigations into the coefficient of thermal expansion of porous films prepared on AA7175 T7351 by anodizing in sulphuric acid electrolyte
Surface and Coatings Technology, Elsevier, 205(7), p.2643-2648
| [HAL] / [BIB] / [DOI] |
2010 |
Lajos Szalmas, Jeerasak Pitakarnnop, Sandrine Geoffroy, Stéphane Colin, Dimitris Valougeorgis. Comparative study between computational and experimental results for binary rarefied gas flows through long microchannels
Microfluidics and Nanofluidics, Springer Verlag, 9(6), p.1103 - 1114
| [HAL] / [BIB] / [DOI] |
2010 |
Julien Sniezewski, Yannick Le Maoult, Philippe Lours, Lisa Pin, Vincent Menvie Bekale, Daniel Monceau, Djar Oquab, Justine Fenech, Florence Ansart, Jean-Pierre Bonino. Sol–gel thermal barrier coatings: Optimization of the manufacturing route and durability under cyclic oxidation
Surface and Coatings Technology, Elsevier, vol. 205(n° 5), pp. 1256-1261
| [HAL] / [BIB] / [DOI] |
2010 |
Marie-Laetitia Pastor, Christian Garnier, Christophe Pescay. Comparison of two non destructive tests in carbon/epoxy composites
Journal of Materials Science and Engineering, Hilaris Publisher, vol. 4
| [HAL] / [BIB] |
2010 |
Mauricio Torres Arellano, Laurent Crouzeix, Bernard Douchin, Francis Collombet, Hilario Hernández Moreno, J. González Velázquez. Strain field measurement of filament-wound composites at ±55° using digital image correlation: An approach for unit cells employing flat specimens
Composite Structures, Elsevier, 92(10), p.2457-2464
| [HAL] / [BIB] / [DOI] |
2010 |
H. Youssef, André Ferrand, Pierre-François Calmon, Patrick Pons, Robert Plana. Methods to improve reliability of bulge test technique to extract mechanical properties of thin films
Microelectronics Reliability, Elsevier, 50(9-11), p.1888-1893
| [HAL] / [BIB] / [DOI] |
2010 |
A. Le Bot, E. Bou-Chakra, Guilhem Michon. Dissipation of Vibration in Rough Contact
Tribology Letters, Springer Verlag, 41(1), p.47-53
| [HAL] / [BIB] / [DOI] |
2010 |
Jérôme Michetti, Delphine Maret, Jean-Philippe Mallet, Franck Diemer. Validation of Cone Beam Computed Tomography as a Tool to Explore Root Canal Anatomy
Journal of Endodontics, Elsevier, 36(7), p.1187 - 1190
| [HAL] / [BIB] / [DOI] |
2010 |
Julien Sniezewski, Yannick Le Maoult, Philippe Lours. Oxidation and spallation of FeCrAl alloys and thermal barrier coatings: in situ investigation under controlled temperature gradient
Materials at High Temperatures, Taylor and Francis, 27(2), p.101-108
| [HAL] / [BIB] / [DOI] |
2010 |
Sébastien Seguy, Tamás Insperger, Lionel Arnaud, Gilles Dessein, Grégoire Peigné. On the stability of high-speed milling with spindle speed variation
International Journal of Advanced Manufacturing Technology, Springer Verlag, 48(9-12), p.883-895
| [HAL] / [BIB] / [DOI] |
2010 |
Bartosz Pałubicki, Rémy Marchal, Jean-Claude Butaud, Louis Denaud, Laurent Bleron, Robert Collet, Grzegorz Kowaluk. A Method of Lathe Checks Measurement; SMOF device and its software
European Journal of Wood and Wood Products, Springer Verlag, 68(2), p.151-159
| [HAL] / [BIB] / [DOI] |
2010 |
Yann Goueffon, Laurent Arurault, Sandra Fontorbes, Catherine Mabru, Claire Tonon, Pascale Guigue. Chemical characteristics, mechanical and thermo-optical properties of black anodic films prepared on 7175 aluminium alloy for space applications
Materials Chemistry and Physics, Elsevier, 120(2-3), p.636-642
| [HAL] / [BIB] / [DOI] |
2010 |
Hanno Niemann, Joseph Morlier, Amir Shahdin, Yves Gourinat. Damage localization using experimental modal parameters and topology optimization
Mechanical Systems and Signal Processing, Elsevier, 24(3), p.636-652
| [HAL] / [BIB] / [DOI] |
2010 |
Sawsane Nakouzi, J. Pancrace, Fabrice Schmidt, Yannick Le Maoult, Florentin Berthet. Curing simulation of composites coupled with infrared heating
International Journal of Material Forming, Springer Verlag, 3(1), p.587-590
| [HAL] / [BIB] / [DOI] |
2010 |
Bruno Castanié, Serge Crézé, Jean-Jacques Barrau, Frederic Lachaud, Laurent Risse. EXPERIMENTAL ANALYSIS OF FAILURES IN FILLED HOLE COMPRESSION TESTS OF CARBON/EPOXY LAMINATE
Composite Structures, Elsevier, 92(5), p.1192-1199
| [HAL] / [BIB] |
2010 |
Xavier Pessoles, Yann Landon, Walter Rubio. Kinematic modelling of a 3-axis NC machine tool in linear and circular interpolation
International Journal of Advanced Manufacturing Technology, Springer Verlag, 47(5-8), p.639-655
| [HAL] / [BIB] / [DOI] |
2010 |
Amir Shahdin, Joseph Morlier, Yves Gourinat. Damage monitoring in sandwich beams by modal parameter shifts: a comparative study of burst random and sine dwell vibration testing
Journal of Sound and Vibration, Elsevier, 3(5), p.566-584
| [HAL] / [BIB] / [DOI] |
2010 |
Anwar Hamasaiid, Gilles Dour, T. Loulou, M.S. Dargusch. A predictive model for the evolution of the thermal conductance at the casting–die interfaces in high pressure die casting
International Journal of Thermal Sciences, Elsevier, 49(2), p.365 - 372
| [HAL] / [BIB] / [DOI] |
2010 |
Yann Goueffon, Catherine Mabru, Michel Labarrère, Laurent Arurault, Claire Tonon, Pascale Guigue. Mechanical behaviour of black anodic films on 7175 aluminium alloy for space applications
Metal Finishing, Elsevier, 108(2), p.22-27
| [HAL] / [BIB] / [DOI] |
2010 |
Yves Gourinat, Uwe Apel, Franck Delbart. The aerocrew mission: training space session at Ny Aalesund Arctic base
Acta Astronautica, Elsevier, 66(1-2), p.74-77
| [HAL] / [BIB] / [DOI] |
2010 |
Manuel Paredes, Alain Daidié. Optimal catalogue selection and custom design of belleville spring arrangements
International Journal on Interactive Design and Manufacturing, Springer Verlag, 4(1), p.51-59
| [HAL] / [BIB] / [DOI] |
2010 |
Issam Tawk, Pablo Navarro, Jean-François Ferrero, Jean-Jacques Barrau, Elie Abdullah. Composite delamination modelling using a multi-layered solid element
Composites Science and Technology, Elsevier, 70(2), p.207 - 214
| [HAL] / [BIB] / [DOI] |
2010 |
Xavier Pessoles, Yann Landon, Michel Mousseigne, Walter Rubio. Simulation of the behaviour of CNC machine-tools in three-axis milling of sculptured surfaces
International Journal of Machining and Machinability of Materials, Inderscience, 8(3/4), p.326
| [HAL] / [BIB] / [DOI] |
2010 |
Jérémie Lasry, Julien Pommier, Yves Renard, Michel Salaün. Extended finite element methods for thin cracked plates with Kirchhoff-Love theory
International Journal for Numerical Methods in Engineering, Wiley, 84(9), p.1115-1138
| [HAL] / [BIB] / [DOI] |
2010 |
Emmanuel de Bilbao, Eric Blond, Claire Michel, Thierry Cutard, N. Schmitt, J. Poirier. A new method to determine the Young's modulus of refractory materials
Interceram, 59(1), p.34-38
| [HAL] / [BIB] |
2010 |
Philippe Olivier, Ihab El Sawi. Designing curing conditions in order to analyse the influence of process-induced stresses upon some mechanical properties of carbon / epoxy laminates at constant T\textlessSubscript\textgreaterg\textless/Subscript\textgreater and degree of cure
Int J Mater Form, 3(2), p.1373--1389
| [HAL] / [BIB] / [DOI] |
2010 |
Ahmad Batikh, Lucien Baldas, R. Caen, W. Ghozlani, Azeddine Kourta. Experimental Characterization of Sub-Millimetric Fluidic Actuators: Application to Boundary Layer Separation Control
Experimental Heat Transfer, Taylor & Francis, 23(1), p.4--26
| [HAL] / [BIB] / [DOI] |
2010 |
Majid Shahzad, Michel Chaussumier, Rémy Chieragatti, Catherine Mabru, Farhad Rezai-Aria. Influence of surface treatments on fatigue life of Al 7010 alloy
Journal of Materials Processing Technology, Elsevier, 210(13), p.1821-1826
| [HAL] / [BIB] / [DOI] |
2010 |
Y. Ledru, Gérard Bernhart, Robert Piquet, Fabrice Schmidt, Laurent Michel. Coupled visco-mechanical and diffusion void growth modelling during composite curing
Composites Science and Technology, Elsevier, 70(15), p.2139-2145
| [HAL] / [BIB] / [DOI] |
2010 |
Thierry Cutard, Nicolas Donval, Aurélien Mazzoni, Claire Michel, Fabien Nazaret. Thermomechanical characterization of monolithic refractory castables
Advances in Science and Technology, Trans Tech Publications, 70, p.37-46
| [HAL] / [BIB] / [DOI] |
2010 |
Fabien Nazaret, Thierry Cutard, Olivier Barrau. Sizing of refractory castable gas-burner using thermomechanical simulations
Advances in Science and Technology, Trans Tech Publications, 70, p.173-178
| [HAL] / [BIB] |
2010 |
Stéphane Segonds, Christian Gogu, Youchun Qiu, Christian Bes, A. Mauffrey. Design optimization under evidence based uncertainty with application to an engine connecting rod
International Journal of Design and Innovation Research, IJDIR, 5(3), p. 77-91
| [HAL] / [BIB] |
2010 |
K. Vijayan, Redouane Zitoune, Francis Collombet. Comprehensive Review on Drilling of Multimaterials Stacks
Journal of Machining and Forming Technologies, 2(3/4), p.171--200
| [HAL] / [BIB] |
2010 |
Aline Sinan, S E Thiemele-Yace, E Abouattier-Mansilla, Karen Vallaeys, Franck Diemer. Etude de l’effet de l’électropolissage sur la résistance à la rupture en fatigue cyclique et sur l’état de surface d’instruments endodontiques
Odonto - Stomatologie Tropical = Tropical Dental Journal, APIDPM Santé tropicale, 33(1), p.23-28
| [HAL] / [BIB] |
2010 |
I. Tawk, Jean-François Ferrero, J.-J. Barrau, E. Abdullah, M. Sudre. Amultilayered Solid Element used to Model Composite Delamination
Advanced Composites Letters, 19(1), p.096369351001900103
| [HAL] / [BIB] / [DOI] |
2010 |
Stephanie Chevalier, Jean-Noël Felices, Xavier Pessoles, Walter Rubio. Study of polynomial path parameterisation for side milling of sculptured surfaces
International Journal of Machining and Machinability of Materials, Inderscience, 8(3-4), p.384--407
| [HAL] / [BIB] / [DOI] |
2010 |
M. Hautier, D. Lévêque, C. Huchette, Philippe Olivier. Investigation of composite repair method by liquid resin infiltration
Plastics, Rubber and Composites, Maney Publishing, 39(3-5), p.200--207
| [HAL] / [BIB] / [DOI] |
2010 |
Sébastien Seguy, Gilles Dessein, Lionel Arnaud, Tamás Insperger. Control of Chatter by Spindle Speed Variation in High-Speed Milling
Advanced Materials Research, Trans Tech Publications, 112, p.179-186
| [HAL] / [BIB] / [DOI] |
2010 |
Eduard Marenić, Ivica Skozrit, Zdenko Tonković. On the Calculation of Stress Intensity Factors and J-Integrals Using the Submodeling Technique
Journal of Pressure Vessel Technology, American Society of Mechanical Engineers, 132(4)
| [HAL] / [BIB] / [DOI] |
2010 |
Marina Fazzini, Sébastien Mistou, Olivier Dalverny, Laurent Robert. Study of image characteristics on digital image correlation error assessment
Optics and Lasers in Engineering, Elsevier, vol. 48, pp. 335-339
| [HAL] / [BIB] / [DOI] |
2010 |
Pierre Selva, Joseph Morlier, Yves Gourinat. Toward a three-dimensional finite-element model of the human inner ear angular accelerometers sensors
International Journal for Computational Vision and Biomechanics (IJCV & B), 3(2), p.149-156
| [HAL] / [BIB] |
2010 |
Jeerasak Pitakarnnop, Stelios Varoutis, Dimitris Valougeorgis, Sandrine Geoffroy, Stéphane Colin, Lucien Baldas. A novel experimental setup for gas microflows
Microfluidics and Nanofluidics, Springer Verlag, 8(1), p.57 - 72
| [HAL] / [BIB] / [DOI] |
2010 |
Lisa Pin, Florence Ansart, Justine Fenech, Philippe Lours, Jean Pierre Bonino, Julien Sniezewski, Yannick Le Maoult. Advances in the field of new smart thermal barrier coatings
Advances in Science and Technology, Trans Tech Publications, 66, p.136-141
| [HAL] / [BIB] / [DOI] |
2010 |
W Karam, Jean-Charles Maré. Advanced model development and validation of landing gear shock struts
Proceedings of the Institution of Mechanical Engineers, Part G: Journal of Aerospace Engineering, 224(5), p.575--586
| [HAL] / [BIB] / [DOI] |
2010 |
Abdallah Mir, Redouane Zitoune, Francis Collombet, Boudjema Bezzazi. Study of Mechanical and Thermomechanical Properties of Jute/Epoxy Composite Laminate
Journal of Reinforced Plastics and Composites, 29(11), p.1669--1680
| [HAL] / [BIB] / [DOI] |
2010 |
Maxime Bordival, Fabrice Schmidt, Yannick Le Maoult, B. Cosson, B. Plantamura. A ray tracing method to simulate the infrared heating of semi-transparent thermoplastics
International Journal of Material Forming, Springer Verlag, 3(Suppl. 1), p.809-812
| [HAL] / [BIB] / [DOI] |
2010 |
Nadhir Lebaal, Stephan Puissant, Fabrice Schmidt. Application of a response surface method to the optimal design of the wall temperature profiles in extrusion die
International Journal of Material Forming, Springer Verlag, 3(1), p.47-58
| [HAL] / [BIB] / [DOI] |
2010 |
Matthieu Bizeul, Christophe Bouvet, Jean-Jacques Barrau, Rémy Cuenca. Influence of woven ply degradation on fatigue crack growth in thin notched composites under tensile loading
International Journal of Fatigue, Elsevier, 32(1), p.60-65
| [HAL] / [BIB] / [DOI] |
2010 |
Joseph Morlier, Guilhem Michon. Virtual vibration measurement using KLT motion tracking algorithm
Journal of Dynamic Systems, Measurement, and Control, American Society of Mechanical Engineers, 132(1), p.011003-011011
| [HAL] / [BIB] / [DOI] |
2010 |
Christophe Paris, Philippe Olivier, Gérard Bernhart. Modelling of the thermokinetic behaviour and the phases transitions of a carbon/polymeric composite submitted to high heating rate ramps
International Journal of Material Forming, Springer Verlag, 3(Suppl. 1), p.639-642
| [HAL] / [BIB] / [DOI] |
2010 |
Amir Shahdin, Laurent Mezeix, Christophe Bouvet, Joseph Morlier, Yves Gourinat. Fabrication and mechanical testing of a new sandwich structure with carbon fiber network core.
Journal of Sandwich Structures and Materials, SAGE Publications, 12(5), p.569-589
| [HAL] / [BIB] / [DOI] |
2010 |
Redouane Zitoune, V. Krishnaraj, Francis Collombet. Study of drilling of composite material and aluminium stack
Composite Structures, Elsevier, 92(5), p.1246--1255
| [HAL] / [BIB] / [DOI] |
2010 |
P. Lavernhe, E. Estivalèzes, Frederic Lachaud, C. Lodter, R. Piquet. Orthodontic bonding: Finite element for standardized evaluations
International Journal of Adhesion and Adhesives, 30(1), p.21--29
| [HAL] / [BIB] / [DOI] |
2010 |
Florentin Berthet. Comparaison des cinétiques de réaction de la résine RTM6 à l'aide des diagrammes TTT
Revue des composites et des matériaux avancés = Journal of Composite and Advanced Materials, IIETA, 20(1), p.25-40
| [HAL] / [BIB] / [DOI] |
2010 |
Alvine Njionhou Kepnang, Florentin Berthet, Bruno Castanié. Optimisation de la résistance au cisaillement interlaminaire (RCIL) des matériaux composites fabriqués par LRI en fonction des paramètres de fabrication
Matériaux & Techniques, EDP Sciences, 98(2), p.151-163
| [HAL] / [BIB] / [DOI] |
2010 |
Céline Badufle, Christophe Blondel, Thierry Druot, Christian Bes, Jean-Baptiste Hiriart-Urruty. A heuristic-based framework to solve a complex aircraft sizing problem
Engineering Applications of Artificial Intelligence, Elsevier, 23(5), p.704--714
| [HAL] / [BIB] / [DOI] |
2010 |
R. Gantois, Arthur Cantarel, Gilles Dusserre, Jean-Noël Felices, Fabrice Schmidt. Numerical simulation of resin transfer molding using BEM and level set method
International Journal of Material Forming, Springer Verlag, 3(Supp 1), p.635-638
| [HAL] / [BIB] / [DOI] |
2010 |
Nadhir Lebaal, Fabrice Schmidt, Stephan Puissant. Optimisation of extrusion flat die design and die wall temperature distribution, using Kriging and response surface method
International Journal of Materials and Product Technology, Inderscience, 38(2-3), p.307-322
| [HAL] / [BIB] / [DOI] |
2009 |
E. Abdullah, I. Tawk, J.-F. Ferrero, J.-J. Barrau. Mode I Delamination Modelling in a Composite Plate using the Plate Behavior of a New Multilayered Solid Element
Mechanics of Advanced Materials and Structures, Taylor & Francis, 17(1), p.60 - 67
| [HAL] / [BIB] / [DOI] |
2009 |
Yann Goueffon, Catherine Mabru, Michel Labarrère, Laurent Arurault, Claire Tonon, Pascale Guigue. Mechanical behavior of black anodic films on 7175 aluminium alloy for space applications
Surface and Coatings Technology, Elsevier, 204(6-7), p.1013-1017
| [HAL] / [BIB] / [DOI] |
2009 |
Amir Shahdin, Laurent Mezeix, Christophe Bouvet, Joseph Morlier, Yves Gourinat. Monitoring the effects of impact damages on modal parameters in carbon fiber entangled sandwich beams
Engineering Structures, Elsevier, 31(12), p.2833-2841
| [HAL] / [BIB] / [DOI] |
2009 |
Anwar Hamasaiid, Gang Wang, C. Davidson, Gilles Dour, M.S. Dargusch. Interfacial Heat Transfer during Die Casting of an Al-Si-Cu Alloy
Metallurgical and Materials Transactions A, Springer Verlag/ASM International, 40(13), p.3056 - 3058
| [HAL] / [BIB] / [DOI] |
2009 |
Julien Sniezewski, Vanessa Vidal, Philippe Lours, Yannick Le Maoult. Thermal barrier coatings adherence and spallation: Interfacial indentation resistance and cyclic oxidation behaviour under thermal gradient
Surface and Coatings Technology, Elsevier, 204(6-7), p.807-811
| [HAL] / [BIB] / [DOI] |
2009 |
Qi Yuhong, Philippe Lours, Yannick Le Maoult, Zhang Zongbao. Spallation Behavior of Thermally Grown Oxide Ceramic Film under Compressive Stresses
Rare Metal Materials and Engineering, 38(2), p.1150-1153
| [HAL] / [BIB] |
2009 |
Qi Yu-Hong, Philippe Lours, Yannick Le Maoult. Spallation Process of Thermally Grown Oxides by In-Situ CCD Monitoring Technique
Journal of Iron and Steel Research International, Springer, 16(6), p.90-94
| [HAL] / [BIB] / [DOI] |
2009 |
Laurent Crouzeix, Jean-Noël Périé, Francis Collombet, Bernard Douchin. An orthotropic variant of the equilibrium gap method applied to the analysis of a biaxial test on a composite material
Composites Part A: Applied Science and Manufacturing, Elsevier, 40(11), p.1732 - 1740
| [HAL] / [BIB] / [DOI] |
2009 |
Julien Bertolini, Bruno Castanié, Jean-Jacques Barrau, Jean-Philippe Navarro. Multi-level experimental and numerical analysis of composite stiffener debonding. Part 1: Non-specific specimen level
Composite Structures, Elsevier, 90(4), p.381-391
| [HAL] / [BIB] / [DOI] |
2009 |
Amir Shahdin, Laurent Mezeix, Christophe Bouvet, Joseph Morlier, Yves Gourinat. Fabrication and mechanical testing of glass fiber entangled sandwich beams: A comparison with honeycomb and foam sandwich beams
Composite Structures, Elsevier, 9(4), p.404-412
| [HAL] / [BIB] / [DOI] |
2009 |
Fabien Chauvet, Paul Duru, Sandrine Geoffroy, Marc Prat. Three Periods of Drying of a Single Square Capillary Tube
Physical Review Letters, American Physical Society, vol. 103(n° 12), pp. 124502-1-124502-4
| [HAL] / [BIB] / [DOI] |
2009 |
Philippe Marguerès, Jean-Noël Périé, Julian Gutierrez Perez, Francis Collombet, Yves-Henri Grunevald. Characterization of a composite structure obtained by RFI using HexFIT® semi-products
Composites Science and Technology, Elsevier, 69(1), p.117
| [HAL] / [BIB] / [DOI] |
2009 |
Hilario Hernández-Moreno, Francis Collombet, Bernard Douchin, Dominique Choqueuse, Peter Davies, J. L González Velázquez. Entire Life Time Monitoring of Filament Wound Composite Cylinders Using Bragg Grating Sensors: II. Process Monitoring
Applied Composite Materials, Springer Verlag (Germany), 16(4), p.197-209
| [HAL] / [BIB] / [DOI] |
2009 |
Bartosz Pałubicki, Rémy Marchal, Jean-Claude Butaud, Louis-Etienne Denaud, Laurent Bléron, Robert Collet, Grzegorz Kowaluk. A Method of Lathe Checks Measurement; SMOF device and its software
European Journal of Wood and Wood Products, Springer Verlag, 68(2), p.151-159
| [HAL] / [BIB] / [DOI] |
2009 |
C. Scandian, Christine Boher, J. D. B. De Mello, Farhad Rezai-Aria. Effect of molybdenum and chromium contents in sliding wear of high‐chromium white cast iron: The relationship between microstructure and wear
Wear, Elsevier, 267(1-4), p.401-408
| [HAL] / [BIB] / [DOI] |
2009 |
Hilario Hernández-Moreno, Francis Collombet, Bernard Douchin, Dominique Choqueuse, Peter Davies. Entire Life Time Monitoring of Filament Wound Composite Cylinders Using Bragg Grating Sensors: III. In-Service External Pressure Loading
Applied Composite Materials, Springer Verlag (Germany), 16(3), p.135-147
| [HAL] / [BIB] / [DOI] |
2009 |
Madalina Calamaz, Jérôme Limido, Mohammed Nouari, Christine Espinosa, Dominique Coupard, Michel Salaün, Franck Girot, Rémy Chieragatti. Toward a better understanding of tool wear effect through a comparison between experiments and SPH numerical modelling of machining hard materials
International Journal of Refractory Metals and Hard Materials, Elsevier, 27, p.595-604
| [HAL] / [BIB] / [DOI] |
2009 |
Raquel Becerril Ortega, Bernard Calmettes, Bernard Fraysse, Pierre Lagarrigue. Des références pour des pratiques de formation. References for training practices. A study of the situation of initial higher technological training. Referencias pasa prácticas de formación. Estudio de una situación de formación tecnológica superior inicial
Activités, Association Recherches et Pratiques sur les ACTivités, 06(1)
| [HAL] / [BIB] / [DOI] |
2009 |
M. Dargusch, A. Hamasaaid, Gilles Dour, X. Yao. Measurements of heat lossest during solidification of light metals
International Journal of Modern Physics B, World Scientific Publishing, 23(06-07), p.802-807
| [HAL] / [BIB] / [DOI] |
2009 |
M. Shah, Christine Boher, Sabine Le Roux, Farhad Rezai-Aria, Catherine Mabru. An investigation of the crack propagation in tool steel X38CrMoV5 (AISI H11) in SET specimens
REVUE DE METALLURGIE‐CAHIERS D INFORMATIONS TECHNIQUES, 106(3), p.140-145
| [HAL] / [BIB] / [DOI] |
2009 |
Rémy Marchal, Frederic Mothe, Louis-Etienne Denaud, Bernard Thibaut, Laurent Bleron. Cutting Forces in basic and real life wood machining processes review, COST Action E35 2004-2008: Wood machining - Micromechanics and fracture
Holzforschung, De Gruyter, 63(2), p.157-167
| [HAL] / [BIB] |
2009 |
Patrick Gilles, Guillaume Cohen, Frederic Monies, Walter Rubio. Dynamic behaviour improvement for a torus milling cutter using balance of the transversal cutting force
International Journal of Advanced Manufacturing Technology, Springer Verlag, 40(7-8), p.669-675
| [HAL] / [BIB] / [DOI] |
2009 |
Manuel Paredes. Methodology to build an assistance tool dedicated to preliminary design: application to compression springs
International Journal on Interactive Design and Manufacturing, Springer Verlag, 3(4), p.265--272
| [HAL] / [BIB] / [DOI] |
2009 |
Florestan Mathurin, Jean Guillot, Pierre Stéphan, Alain Daidié. 3D Finite Element Modeling of an Assembly Process With Thread Forming Screw
Journal of Manufacturing Science and Engineering, American Society of Mechanical Engineers, 131(4), p.041015
| [HAL] / [BIB] / [DOI] |
2009 |
W. Karam, Jean-Charles Maré. Modelling and simulation of mechanical transmission in roller-screw electromechanical actuators
Aircraft Engineering and Aerospace Technology, 81(4), p.288--298
| [HAL] / [BIB] / [DOI] |
2009 |
Manuel Paredes, Emmanuel Rodriguez. Optimal design of conical Springs
Engineering with computers, 25(2), p.147--154
| [HAL] / [BIB] / [DOI] |
2009 |
N. Driot, Alain Berlioz, C.-H. Lamarque. Stability and Stationary Response of a Skew Jeffcott Rotor with Geometric Uncertainty
Journal of Computational and Nonlinear Dynamics, American Society of Mechanical Engineers (ASME), 4(2)
| [HAL] / [BIB] / [DOI] |
2009 |
Masood Shah, Catherine Mabru, Christine Boher, Sabine Le Roux, Farhad Rezai-Aria. Crack Propagation in Tool Steel X38CrMoV5 (AISI H11) in SET Specimens
Advanced Engineering Materials, Wiley-VCH Verlag, 11(9), p.746-749
| [HAL] / [BIB] / [DOI] |
2009 |
Matthieu Mulle, Redouane Zitoune, Francis Collombet, Laurent Robert, Yves Henri Grunevald. Measuring strains through the thickness of a composite structural specimen subjected to bending
Experimental Mechanics, Society for Experimental Mechanics, 49(6), p.877-880
| [HAL] / [BIB] |
2009 |
A. Barrot, Manuel Paredes, Marc Sartor. Extended equations of load distribution in the axial direction in a spline coupling
Engineering Failure Analysis, 16(1), p.200--211
| [HAL] / [BIB] / [DOI] |
2009 |
Hilario Hernández-Moreno, Francis Collombet, B. Douchin, Dominique Choqueuse, Peter Davies, J. L. González Velázquez. Entire Life Time Monitoring of Filament Wound Composite Cylinders Using Bragg Grating Sensors: I. Adapted Tooling and Instrumented Specimen
Applied Composite Materials, Springer Verlag (Germany), 16(3), p.173-182
| [HAL] / [BIB] / [DOI] |
2009 |
Matthieu Mulle, Redouane Zitoune, Francis Collombet, Laurent Robert, Yves Henri Grunevald. Embedded FBGs and 3-D DIC for the stress analysis of a structural specimen subjected to bending
Composite Structures, Elsevier, 91(1), p.48-55
| [HAL] / [BIB] |
2009 |
Christophe Bouvet, Bruno Castanié, Matthieu Bizeul, Jean-Jacques Barrau. Low velocity impact modelling in laminate composite panels with discrete interface elements
International Journal of Solids and Structures, Elsevier, 46(14-15), p.2809-2821
| [HAL] / [BIB] / [DOI] |
2009 |
M. Mulle, Francis Collombet, Philippe Olivier, Redouane Zitoune, C. Huchette, Frédéric Laurin, Y.H. Grunevald. Assessment of cure-residual strains through the thickness of carbon-epoxy laminates using FBGs Part II: Technological specimen
Composites Part A: Applied Science and Manufacturing, Elsevier, 40(10), p.1534--1544
| [HAL] / [BIB] / [DOI] |
2009 |
S. Liscouet Hanke, Jean-Charles Maré, S. Pufe. Simulation Framework for Aircraft Power System Architecting
Journal of Aircraft, 46(4), p.1375--1380
| [HAL] / [BIB] / [DOI] |
2009 |
O. Nemes, Frederic Lachaud. Modeling of Cylindrical Adhesively Bonded Joints
Journal of Adhesion Science and Technology, Taylor & Francis, 23(10-11), p.1383--1393
| [HAL] / [BIB] / [DOI] |
2009 |
Joseph Morlier, Yves Gourinat, A. Shahdin. Significance of Low Energy Impact Damage on Modal Parameters of Composite Beams by Design of Experiments
Journal of Physics: Conference Series, IOP Science, 181(1)
| [HAL] / [BIB] / [DOI] |
2009 |
Y. Aminanda, Bruno Castanié, J.-J. Barrau, P. Thévenet. Experimental and numerical study of compression after impact of sandwich structures with metallic skins
Composites Science and Technology, Elsevier, 69(1), p.50-59
| [HAL] / [BIB] |
2009 |
Laurent Mezeix, Christophe Bouvet, Julitte Huez, Dominique Poquillon. Mechanical behavior of entangled fibers and entangled cross-linked fibers during compression
Journal of Materials Science, Springer Verlag, 44(14), p.3652-3661
| [HAL] / [BIB] / [DOI] |
2009 |
Julien Bertolini, Bruno Castanié, Jean-Jacques Barrau, Jean-Philippe Navarro, Caroline Petiot. Multi-level experimental and numerical analysis of composite stiffener debonding. Part 2: Element and panel level
Composite Structures, Elsevier, 90(4), p.392-403
| [HAL] / [BIB] / [DOI] |
2009 |
M. Tata, D. Miroud, S. Lebaili, Thierry Cutard. The study of properties of WC-based and W-based composites fabricated by infiltration with liquid Cu-Mn binder
Asian Journal of Scientific Research, 2(2), p.76-86
| [HAL] / [BIB] / [DOI] |
2009 |
Marie Georgelin-Gurgel, Franck Diemer, Emmanuel Nicolas, Martine Hennequin. Surgical and Nonsurgical Endodontic Treatment-induced Stress
Journal of Endodontics, Elsevier, 35(1), p.19 - 22
| [HAL] / [BIB] / [DOI] |
2009 |
Amir Shahdin, Joseph Morlier, Yves Gourinat. Correlating low energy impact damage with changes in modal parameters: a preliminary study on composite beams
Structural Health Monitoring, SAGE Publications (UK and US), 8(6), p.523-536
| [HAL] / [BIB] / [DOI] |
2009 |
Tchadja Kagnaya, Christine Boher, Laurence Lambert, Myriam Lazard, Thierry Cutard. Friction at high sliding speed of WC-6Co pin versus steel disc AISI 1045 : estimation of the contact temperature
The international journal of multiphysics., Multi-Science Publishing, 3(2), p..141-153
| [HAL] / [BIB] / [DOI] |
2009 |
Christine Boher, Olivier Barrau, R. Gras, Farhad Rezai-Aria. A wear model based on cumulative cyclic plastic straining
Wear, Elsevier, 267(5-8), p.1087-1094
| [HAL] / [BIB] / [DOI] |
2009 |
Traian Branza, Frederic Deschaux-Beaume, G. Sierra, Philippe Lours. Study and prevention of cracking during weld-repair of heat-resistant cast steels
Journal of Materials Processing Technology, Elsevier, 209, p.536-547
| [HAL] / [BIB] / [DOI] |
2009 |
Nicolas Pirc, Fabrice Schmidt, Marcel Mongeau, Florian Bugarin, Francisco Chinesta. Optimization of 3D Cooling Channels in Injection Molding using DRBEM and Model Reduction
International Journal of Material Forming, Springer Verlag, 2(1), pp.271-274
| [HAL] / [BIB] / [DOI] |
2009 |
M. Mulle, Francis Collombet, Philippe Olivier, Y.H. Grunevald. Assessment of cure residual strains through the thickness of carbon-epoxy laminates using FBGs, Part I: Elementary specimen
Composites Part A: Applied Science and Manufacturing, Elsevier, 40(1), p.94--104
| [HAL] / [BIB] / [DOI] |
2007 |
Benoit Mascaro, Nicolas Dominguez, Philippe Marguerès, Vincent Gibiat. Caractérisation ultrasonore de la porosité dans les composites Carbone/Epoxy stratifiés
Evaluation globale et détection de zones de porosité localisées dans l'épaisseur.
Revue des composites et des matériaux avancés = Journal of Composite and Advanced Materials, IIETA, 17(2), p.157-167
| [HAL] / [BIB] / [DOI] |
2005 |
Philippe Marguerès, Jorge Lopez-Torres, Philippe Olivier, Francis Collombet. Méthodologie de caractérisation des structures composites obtenues par rfi avec le matériau HexFIT™
Revue des composites et des matériaux avancés = Journal of Composite and Advanced Materials, IIETA, 15(3), p.401 - 412
| [HAL] / [BIB] / [DOI] |