Arthur Cantarel
Maître de conférence - Institut Universitaire de Technologie de Tarbes (IUT de Tarbes) Membre du groupe Matériaux et Structures Composites (MSC) IUT, 1 rue Lautréamont 65016 Tarbes (recherche) |
Activités de recherche :
– Mise en oeuvre, Modélisation et Simulation numérique des procédés d’élaboration des matériaux composites par voie liquide à différentes échelles.
– Modélisation et Caractérisation de la perméabilité des renforts fibreux.
– Cinétique de réaction des polymères couplée aux procédés (température, écoulement, …)
– Composites à matrice thermoplastique reactive
– Influence du procédé sur les propriétés mécaniques des matériaux composites.
– Caractérisation et contrôle des matériaux composites.
– Multi-matériaux à base de bois et éco-matériaux
Activités d'enseignement :
BUT Génie Mécanique et Productique
– Mécanique : statique, cinématique, dynamique, énergétique, fluides ;
– Dimensionnement des structures (DDS) ;
– Sciences des matériaux (SDM) : Alliages métalliques, traitements, Matériaux composites, Céramiques ;
LP Innovation, Matériaux et Structures Composites (IMSC)
– Procédés de mise en oeuvre des matériaux composites
– CAO composites sur Catia
– Mise en oeuvre des matériaux composites : contact, pré-imprégnés, infusion ;
– Projets tutorés
Master
– Simulation numérique des procédés ;
– Procédés d’élaboration des matériaux composites.
Responsabilités collectives :
Responsable de la Licence Professionnelle Innovations, Matériaux et Structures Composites (IMSC)
Animateur de l’axe Matériaux Procédés Propriétés (MaPP) du groupe MSC de l’ICA
Production scientifique :
73 contributions trouvéesAnnée | Type | Auteurs et titre du document | Liens |
---|---|---|---|
2023 | COM | Axel Peignon, Joël Serra, Gelard Léo, Arthur Cantarel, Florent Eyma, Bruno Castanié. Evaluation du taux de restitution d'énergie en mode I d'un LVL de peuplier 12èmes journées du GDR 3544 « Sciences du bois » (2023), à paraître, Limoges, FR | [HAL] / [BIB] |
2023 | COM | William Han, Quentin Govignon, Arthur Cantarel, Fabrice Schmidt. Dual-scale flow simulation for LCM processes Simulation of reactive PA6 flow in a fibrous preform for T-RTM process ICCM23 - Twenty-third international conference on composite materials, Belfast, IE | [HAL] / [BIB] |
2023 | COM | Axel Peignon, Bruno Castanié, Eyma Florent, Arthur Cantarel, Joël Serra. Mechanical characterization and modelling of poplar plywood. Caractérisation mécanique et modélisation du contreplaqué de peuplier JNC23 : Journées Nationales sur les Composites 2023, Besançon (France), FR | [HAL] / [BIB] |
2023 | ACL | Axel Peignon, Joël Serra, L. Gélard, Arthur Cantarel, Florent Eyma, B. Castanié. Mode I delamination R-Curve in poplar laminated veneer lumber Theoretical and Applied Fracture Mechanics, Elsevier | [HAL] / [BIB] / [DOI] |
2022 | COM | Bruno Castanié, Romain Guélou, Arthur Cantarel, Samuel Rivallant, Florent Eyma. On the crashworthiness properties of plywood. SECOND EUROPEAN CONFERENCE ON CRASHWORTHINESS OF COMPOSITE STRUCTURES (ECCCS-2), Toulouse, FR | [HAL] / [BIB] |
2022 | ACL | Jean Gulla, Arthur Cantarel, Marie-Laetitia Pastor, Xiaojing Gong. Impact Behaviors of Sandwich Composites Produced by Liquid Resin Infusion: Influences of the Process Parameters Journal of Aerospace Engineering, American Society of Civil Engineers, 35(5) | [HAL] / [BIB] / [DOI] |
2022 | COM | Bruno Castanié, Axel Peignon, Arthur Cantarel, Florent Eyma, Joel Serra. Mechanical characterization and modelling of poplar plywood. 25th International Conference on Composite Structures. ICCS-25, Porto, PT | [HAL] / [BIB] |
2022 | COM | Romain Guélou, Florent Eyma, Samuel Rivallant, Bruno Castanié, Arthur Cantarel. Static and dynamic crushing of sandwich tubes with a birch core and carbon skins 20th European Conference on Composite Materials (ECCM20), 6 p., Lausanne, CH | [HAL] / [BIB] |
2022 | COM | Bruno Castanié, Christophe Bouvet, Joël Serra, Florent Eyma, Arthur Cantarel. Le bois, un matériau pour la mobilité durable? 2éme Conférence sur les Eco-Matériaux en Afrique – CEMA’2022, Saly, SN | [HAL] / [BIB] |
2022 | COM | Bruno Castanié, Christophe Bouvet, Joël Serra, Florent Eyma, Arthur Cantarel. Le bois, un matériau pour la mobilité durable ?. Wood, a material for sustainable mobility? 2éme Conférence sur les Eco-Matériaux en Afrique – CEMA’2022, Saly, SN | [HAL] / [BIB] |
2022 | ACL | R. Guélou, Florent Eyma, Arthur Cantarel, Samuel Rivallant, Bruno Castanié. A comparison of three wood species (poplar, birch and oak) for crash application European Journal of Wood and Wood Products, Springer Verlag | [HAL] / [BIB] / [DOI] |
2022 | ACL | William Han, Quentin Govignon, Arthur Cantarel, Fabrice Schmidt. Efficient polymerization and crystallization kinetics coupling of polyamide 6 synthesis for liquid composite molding process modeling Polymer Engineering and Science, Wiley-Blackwell, 62(4), p.999-1012 | [HAL] / [BIB] / [DOI] |
2021 | ACL | Romain Guélou, Florent Eyma, Arthur Cantarel, Samuel Rivallant, Bruno Castanié. Dynamic crushing of wood-based sandwich composite tubes Mechanics of Advanced Materials and Structures, Taylor & Francis, p.1-21 | [HAL] / [BIB] / [DOI] |
2021 | ACL | R. Guélou, Florent Eyma, Arthur Cantarel, Samuel Rivallant, Bruno Castanié. Static crushing of wood based sandwich composite tubes Composite Structures, Elsevier, 273, p.114317 | [HAL] / [BIB] / [DOI] |
2021 | COM | Romain Guélou, Florent Eyma, Arthur Cantarel, Bruno Castanié, Samuel Rivallant. Caractérisation de tubes sandwichs bois-carbone pour des applications de crash. Characterization of wood and carbon sandwich tubes for crash applications JNC 22 – Conférence virtuelle – 28 - 30 juin 2021, Besancon, FR | [HAL] / [BIB] |
2021 | COM | Bruno Castanié, Romain Guélou, Arthur Cantarel, Samuel Rivallant, Florent Eyma. Wood as a structural material for transportation industry: Past example and recent advances 24th International Conference on Composite Structures Faculty of Engineering, University of Porto, Portugal, Porto, PT | [HAL] / [BIB] |
2021 | COM | William Han, Quentin Govignon, Arthur Cantarel, Cédric Samuel, Fabrice Schmidt. Modeling the reactive PA6 flow for LCM processes ESAFORM 2021 - 24th International Conference on Material Forming, En ligne, BE | [HAL] / [BIB] / [DOI] |
2021 | ACL | R. Guélou, Florent Eyma, Arthur Cantarel, Samuel Rivallant, Bruno Castanié. Crashworthiness of poplar wood veneer tubes International Journal of Impact Engineering, Elsevier, 147, p.103738 | [HAL] / [BIB] / [DOI] |
2020 | ACL | Chen Li, Arthur Cantarel, Xiaojing Gong. A study on resin infusion and effects of reinforcement structure at dual scales by a quasi-realistic numerical simulation method Journal of Composite Materials, SAGE Publications, 54(27), p.4157-4171 | [HAL] / [BIB] / [DOI] |
2019 | ACL | John Susainathan, Florent Eyma, Emmanuel de Luycker, Arthur Cantarel, Christophe Bouvet, Bruno Castanié. Experimental investigation of compression and compression after impact of wood-based sandwich structures Composite Structures, Elsevier, 220, p.236-249 | [HAL] / [BIB] / [DOI] |
2019 | COM | Romain Guélou, Florent Eyma, Arthur Cantarel, Bruno Castanié, Christophe Bouvet, John Susainathan. Développement et caractérisation d'éco-structures composites à base de bois. Development and characterization of wood based eco-structures composites 21ème Journées Nationales sur les Composites, Bordeaux, Talence, FR | [HAL] / [BIB] |
2019 | ACL | John Susainathan, Florent Eyma, Emmanuel de Luycker, Arthur Cantarel, Bruno Castanié. Numerical modeling of impact on wood-based sandwich structures Mechanics of Advanced Materials and Structures, Taylor & Francis | [HAL] / [BIB] / [DOI] |
2019 | ACL | Shahriar Bakrani Balani, France Chabert, Valérie Nassiet, Arthur Cantarel. Influence of printing parameters on the stability of deposited beads in fused filament fabrication of poly(lactic) acid Additive Manufacturing, Elsevier, 25, p.112-121 | [HAL] / [BIB] |
2019 | ACL | Shahriar Bakrani Balani, France Chabert, Valérie Nassiet, Arthur Cantarel. Influence of the printing parameters on the stability of the deposited beads in fused filament fabrication of poly(lactic) acid Additive Manufacturing, Elsevier, 25, p.112-121 | [HAL] / [BIB] / [DOI] |
2019 | ACL | Céline Vicard, Olivier de Almeida, Arthur Cantarel, Gérard Bernhart. Modeling of the polymerization and crystallization kinetic coupling of polyamide 6 synthesized from ε-caprolactam Polymer, Elsevier, 180, p.121681 | [HAL] / [BIB] / [DOI] |
2018 | ACL | Chen Li, Arthur Cantarel, Xiaojing Gong. Influence of structural parameters at microscale on the fiber reinforcement Journal of Composite Materials, SAGE Publications, 53(7), p.863-872 | [HAL] / [BIB] / [DOI] |
2018 | COM | John Susainathan, Florent Eyma, Emmanuel de Luycker, Arthur Cantarel, Bruno Castanié. WOOD-BASED COMPOSITE SANDWICH STRUCTURES ECCM18 - 18th European Conference on Composite Materials, p.24 - 28, Athènes, GR | [HAL] / [BIB] |
2018 | COM | Shahriar Bakrani Balani, Arthur Cantarel, France Chabert, Valérie Nassiet. Influence of parameters controlling the extrusion step in fused filament fabrication (FFF) process applied to polymers using numerical simulation ESAFORM 2018, 1960, p.140003-1-140003-6, Palermo, IT | [HAL] / [BIB] / [DOI] |
2018 | COM | Matthias Barus, Hélène Welemane, Valérie Nassiet, Marie-Laetitia Pastor, Arthur Cantarel, Francis Collombet, Laurent Crouzeix, Jean-Christophe Batsale. Optimization of thermal joint behaviour for the detection of bonding defects by infrared thermography PhotoMechanics 2018, Toulouse, FR | [HAL] / [BIB] |
2018 | ACL | Matthias Barus, Hélène Welemane, Valérie Nassiet, Marie-Laetitia Pastor, Arthur Cantarel, Francis Collombet, Laurent Crouzeix, Yves-Henri Grunevald. NDT-based design of joint material for the detection of bonding defects by infrared thermography NDT & E International, Elsevier, 93, p.157-163 | [HAL] / [BIB] / [DOI] |
2018 | COM | Jean Gulla, Arthur Cantarel, Marie-Laetitia Pastor, Xiaojing Gong. One shot sandwich composite structure by LRI, influence of manufacturing process parameters on low velocity impact FPCM 14, Lulea, SE | [HAL] / [BIB] |
2018 | ACL | John Susainathan, Florent Eyma, Emmanuel de Luycker, Arthur Cantarel, Bruno Castanié. Experimental investigation of impact behavior of wood-based sandwich structures Composites Part A: Applied Science and Manufacturing, Elsevier, vol. 109, pp. 10-19 | [HAL] / [BIB] / [DOI] |
2018 | ACL | Céline Vicard, Olivier de Almeida, Arthur Cantarel, Gérard Bernhart. Diagramme TTT isotherme de la polymérisation anionique du PA6 à partir de l'epsilon-caprolactame Revue des composites et des matériaux avancés = Journal of Composite and Advanced Materials, IIETA, 28(1), p.89-110 | [HAL] / [BIB] / [DOI] |
2017 | ACL | Céline Vicard, Olivier de Almeida, Arthur Cantarel, Gérard Bernhart. Experimental study of polymerization and crystallization kinetics of polyamide 6 obtained by anionic ring opening polymerization of ε-caprolactam Polymer, Elsevier, 132, p.88 - 97 | [HAL] / [BIB] / [DOI] |
2017 | COM | Matthias Barus, Hélène Welemane, Valérie Nassiet, Marie-Laetitia Pastor, Arthur Cantarel, Francis Collombet, Laurent Crouzeix, Yves-Henri Grunevald. Analyse de réparations collées par thermographie InfraRouge Optimisation de la réponse thermique du joint structural GDR week du GDR CNRS 3671 MIC, Talence, FR | [HAL] / [BIB] |
2017 | COM | Benjamin Valès, Victor Alfonso Munoz Cuartas, Hélène Welemane, Marie-Laetitia Pastor, Baptiste Trajin, Marianne Perrin, Arthur Cantarel, Moussa Karama. Thermographic investigation of heat source in transversely isotropic composites International Conference on Structural Analysis of Advanced Materials (ICSAAM 2017), p.030043-1, Bucarest, RO | [HAL] / [BIB] |
2017 | COM | Céline Vicard, Olivier de Almeida, Arthur Cantarel, Gérard Bernhart. TTT diagram of the anionic polymerization PA6 from ε-Caprolactam ICCM 21 - 21th International Conference on Composite Materials, 10 p., Xi'an, CN | [HAL] / [BIB] |
2017 | COM | Céline Vicard, Olivier de Almeida, Arthur Cantarel, Gérard Bernhart. Diagramme TTT de la polymérisation anionique du PA6 à partir de l'ε-caprolactame et influence des fibres sur les cinétiques JNC 20 - Journées Nationales sur les Composites 2017, Champs-sur-Marne, FR | [HAL] / [BIB] |
2017 | COM | Shahriar Bakrani Balani, France Chabert, Valérie Nassiet, Arthur Cantarel, Christian Garnier. Toward improvement of the properties of parts manufactured by FFF ( Fused Filament Fabrication) through understanding the influence of temperature and rheological behaviour on the coalescence phenomenon ESAFORM 2017, pp. 040008, Dublin, IE | [HAL] / [BIB] |
2017 | COM | Matthias Barus, Hélène Welemane, Francis Collombet, Valérie Nassiet, Marie-Laetitia Pastor, Arthur Cantarel, Laurent Crouzeix, Yves-Henri Grunevald. Comportement thermique d'un joint de colle structural et analyse par thermographie infrarouge : application à la caractérisation de structures composites réparées Colloque francophone CMOI-FLUVISU, Le Mans, FR | [HAL] / [BIB] |
2017 | COM | Jean Gulla, Arthur Cantarel, Marie-Laetitia Pastor, Xiaojing Gong. One Shot Sandwich Composite Structure by Liquid Resin Infusion: Influence of Manufacturing Process Parameters on Low Velocity Impact Chinese-Franco Symposium, Tarbes, FR | [HAL] / [BIB] |
2017 | COM | C. Li, Arthur Cantarel, Xiaojing Gong, D. Liang. Numerical Simulation of Infusion at Microscale Permeability Calculation 21th International Conference on Composite Materials 2017 (ICCM-21), 11 pages, Xi'an, CN | [HAL] / [BIB] |
2017 | COM | Jean Gulla, Arthur Cantarel, Marie-Laetitia Pastor, Xiaojing Gong. One Shot Sandwich Composite Structure by Liquid Resin Infusion: Influence of Manufacturing Process Parameters on Low Velocity Impact 20th International Conference on Composite Structures, paris, FR | [HAL] / [BIB] |
2017 | ACL | M.-Q. Thai, Fabrice Schmidt, Gilles Dusserre, Arthur Cantarel, L. Silva. BEM computation of 3D Stokes flow including moving front International Journal of Material Forming, Springer Verlag, 10(4), p.567-580 | [HAL] / [BIB] / [DOI] |
2017 | ACL | John Susainathan, Florent Eyma, Emmanuel de Luycker, Arthur Cantarel, Bruno Castanié. Manufacturing and quasi-static bending behavior of wood-based sandwich structures. Composite Structures, Elsevier, 182, p.487-504 | [HAL] / [BIB] / [DOI] |
2017 | COM | J. Gulla, Arthur Cantarel, Marie-Laetitia Pastor, Xiaojing Gong. One Shot Sandwich Composite Structure by Liquid Resin Infusion: Influence of Manufacturing Process Parameters on Low Velocity Impact ICCS 2017, Zürich, CH | [HAL] / [BIB] |
2017 | ACL | Matthias Barus, Hélène Welemane, Francis Collombet, Marie-Laetitia Pastor, Arthur Cantarel, Laurent Crouzeix, Yves-Henri Grunevald, Valérie Nassiet. Bonded repair issues for composites: An investigation approach based on infrared thermography NDT & E International, Elsevier, 85, p.27-33 | [HAL] / [BIB] / [DOI] |
2016 | COM | Matthias Barus, Hélène Welemane, Francis Collombet, Marie-Laetitia Pastor, Arthur Cantarel, Valérie Nassiet, Laurent Crouzeix, Yves-Henri Grunevald. A New NDT Method for the study of composite bonded repair 17th European Conference on Composite Materials (ECCM17), Munich, DE | [HAL] / [BIB] |
2016 | COM | John Susainathan, Florent Eyma, Emmanuel de Luycker, Arthur Cantarel, Bruno Castanié. IMPACT BEHAVIOR OF WOOD-BASED SANDWICH STRUCTURES International Conference on Sandwich Structures, Floride, US | [HAL] / [BIB] |
2016 | ACL | Benjamin Vales, Victor Munoz Cuartas, Hélène Welemane, Marie-Laetitia Pastor, Baptiste Trajin, Marianne Perrin, Arthur Cantarel, Moussa Karama. Heat source estimation in anisotropic materials Composite Structures, Elsevier, 136, p.287-296 | [HAL] / [BIB] / [DOI] |
2016 | COM | Jean Gulla, Arthur Cantarel, Marie-Laetitia Pastor, Xiaojing Gong. Système de Transport de Mortiers lors de Raids d’Artillerie Héliportés CNRIUT 2016 – Congrès National de la Recherche en IUT, Nantes, FR | [HAL] / [BIB] |
2016 | COM | J.P. Susainathan, Florent Eyma, Emmanuel de Luycker, Arthur Cantarel, Bruno Castanié. Experimental investigation on impact behaviour of wood-based sandwich structures Proceedings of 1st International Conference on Impact Loading of Structures and Materials (ICILSM 2016), Turin, IT | [HAL] / [BIB] |
2016 | ACL | Victor Munoz, Benjamin Vales, Marianne Perrin, Marie-Laetitia Pastor, Hélène Welemane, Arthur Cantarel, Moussa Karama. Damage detection in CFRP by coupling acoustic emission and infrared thermography Composites Part B: Engineering, Elsevier, 85, p.68-75 | [HAL] / [BIB] / [DOI] |
2015 | COM | Matthias Barus, Francis Collombet, Hélène Welemane, Laurent Crouzeix, Arthur Cantarel, Yves-Henri Grunevald, Valérie Nassiet, Marie-Laetitia Pastor. Infrared signatures of bonded interfaces for the repair of primary structures in composite materials 20th International Conference on Composite Materials, Copenhague, DK | [HAL] / [BIB] |
2015 | COM | Victor Munoz, Marianne Perrin, Marie-Laetitia Pastor, H. Welemane, Arthur Cantarel, Moussa Karama. Identification of damage mechanisms in CFRP composites by coupling acoustic emission and infrared thermography Franco-chinese symposium on Damage and Fracture of Composite Structures : assessment and monitoring, Tarbes, FR | [HAL] / [BIB] |
2015 | COM | Victor Munoz, Marianne Perrin, Marie-Laetitia Pastor, Hélène Welemane, Arthur Cantarel, Moussa Karama. Identification de mécanismes d'endommagement de stratifiés carbone/époxy par couplage entre émission acoustique et thermographie infrarouge Journées Scientifiques et techniques, Cachan, FR | [HAL] / [BIB] |
2014 | COM | Victor Alfonso Munoz Cuartas, Benjamin Valès, Marianne Perrin, Marie-Laetitia Pastor, Hélène Welemane, Arthur Cantarel, Moussa Karama. Coupling infrared thermography and acoustic emission for damage study in CFRP composites The 12th International Conference on Quantitative InfraRed Thermography - QIRT 2014, p.1-8, Bordeaux, FR | [HAL] / [BIB] |
2014 | COM | Victor Munoz Cuartas, Marianne Perrin, Marie-Laetitia Pastor, Hã©lã¨ne Welemane, Arthur Cantarel, Moussa Karama. Utilisation de la thermographie infrarouge et de l'émission acoustique pour l'identification de l'endommagement d'un composite stratifié carbone-époxy VIIIèmes Journées d'Etudes Techniques - International congress for applied mechanics JET 2014, Marrakech, MA | [HAL] / [BIB] |
2014 | COM | Victor Munoz Cuartas, Marianne Perrin, Marie-Laetitia Pastor, Hélène Welemane, Arthur Cantarel, Moussa Karama. Identification of the elastic properties in CFRP composites International Symposium on Aircraft Materials ACMA 2014, pp. 61-62, Marrakech, MA | [HAL] / [BIB] |
2014 | COM | V. Munoz, Marianne Perrin, Marie-Laetitia Pastor, H. Welemane, Arthur Cantarel, M. Karama. Identification de mécanismes d’endommagement de stratifiés carbone/époxy par émission acoustique CILSA - Journées Instrumentation, traitement du signal et modélisation des sources acoustiques dans les matériaux composites, Lyon, FR | [HAL] / [BIB] |
2014 | ACL | Victor Munoz Cuartas, Marianne Perrin, Marie-Laetitia Pastor, Hélène Welemane, Arthur Cantarel, Moussa Karama. Determination of the elastic properties in CFRP composites: comparison of different approaches based on tensile tests and ultrasonic characterization Advances in Aircraft and Spacecraft Science, Techno-Press, vol. 2(n° 3), pp. 249-260 | [HAL] / [BIB] / [DOI] |
2014 | COM | M.Q. Thai, Fabrice Schmidt, Gilles Dusserre, Arthur Cantarel, L. Silva. Micro-scale modeling of resin flow by BEM- Permeability computation International conference on COmputational methods in Manufacturing Processes, Saint-Etienne, FR | [HAL] / [BIB] |
2013 | ACL | Victor Munoz, Marianne Perrin, Marie-Laetitia Pastor, Hélène Welemane, Arthur Cantarel, Moussa Karama. Application of non destructive testing to the detection of aeronautical defects in composite structure Nonconventional Technologies Review | [HAL] / [BIB] |
2013 | COM | Victor Munoz Cuartas, Marianne Perrin, Marie-Laetitia Pastor, Hélène Welemane, Arthur Cantarel, Moussa Karama. Identification of the elastic properties of composite materials International Conference on Structural Analysis of Advanced Materials, Kos, GR | [HAL] / [BIB] |
2013 | ACL | Renaud Gantois, Arthur Cantarel, Benoit Cosson, Gilles Dusserre, Jean-Noël Felices, Fabrice Schmidt. BEM-based models to simulate the resin flow at macroscale and microscale in LCM processes Polymer Composites, Wiley, 34(8), p.1235-1244 | [HAL] / [BIB] / [DOI] |
2013 | COM | Victor Munoz Cuartas, Marianne Perrin, Marie-Laetitia Pastor, Hélène Welemane, Arthur Cantarel, Moussa Karama. Application of non destructive testing to the detection of aeronautical defects in composite structures International Conference of Nonconventional Technologies, Sibiu, RO | [HAL] / [BIB] |
2011 | ACL | Renaud Gantois, Arthur Cantarel, Gilles Dusserre, Jean Noel Félices, Fabrice Schmidt. Mold Filling Simulation of Resin Transfer Molding Combining BEM and Level Set Method Applied Mechanics and Materials, Trans Tech Publications, 62, p.57-65 | [HAL] / [BIB] / [DOI] |
2010 | COM | Renaud Gantois, Arthur Cantarel, Gilles Dusserre, Jean-Noël Felices, Fabrice Schmidt. Mold filling simulation of resin transfer molding combining BEM and level set method ACMA 2010 -International symposium on composites and aircraft materials, 8 p., Marrakech, MA | [HAL] / [BIB] |
2010 | COM | Renaud Gantois, Arthur Cantarel, Gilles Dusserre, Jean-Noël Felices, Fabrice Schmidt. Numerical simulation of resin transfer molding using BEM and level set method ESAFORM 2010 -13th International ESAFORM conference on material forming, 4 p., Brescia, IT | [HAL] / [BIB] |
2010 | ACL | R. Gantois, Arthur Cantarel, Gilles Dusserre, Jean-Noël Felices, Fabrice Schmidt. Numerical simulation of resin transfer molding using BEM and level set method International Journal of Material Forming, Springer Verlag, 3(Supp 1), p.635-638 | [HAL] / [BIB] / [DOI] |
2009 | COM | R. Gantois, Arthur Cantarel, Jean-Noël Felices, Nicolas Pirc, Fabrice Schmidt. BEM Simulation Of 3D Updated Resin Front For LCM Processes ICSAAM 2009 - International Conference on Structural Analysis of Advanced Materials, 446, p.131-136, Tarbes, FR | [HAL] / [BIB] / [DOI] |
2009 | COM | Renaud Gantois, Arthur Cantarel, Jean-Noël Felices, Nicolas Pirc, Fabrice Schmidt. BEM simulation of 3D updated resin front for LCM processes ICSAAM 2009 -International Conference on Structural Analysis of Advanced Materials, p.131-136, Tarbes, FR | [HAL] / [BIB] |
2009 | ACL | Arthur Cantarel, Eric Lacoste, Corine Arvieu, Olivier Mantaux, Michel Danis. Numerical simulation of segregation phenomena coupled with phase change and fluid flow : application to metal matrix composites processing Numerical Heat Transfer Applications, 55(9), p.880-892 | [HAL] / [BIB] / [DOI] |