Alain Daidié

Professeur - Institut National des Sciences Appliquées de Toulouse (INSA de Toulouse)
Membre du groupe Modélisation des Systèmes et Microsystèmes Mécaniques (MS2M)
BR1022, Espace Clément Ader, 3 rue Caroline Aigle
31400 Toulouse
 
    (recherche)
    (enseignement)
Activités de recherche :

Activités menées au sein de l’axe « Ingénierie des Systèmes et des Microsystèmes (ISM)« . Les deux thèmes suivants sont plus particulièrement abordés :

Modélisation et caractérisation des assemblages mécaniques.
Les domaines d’activité sont très variés avec un partenariat industriel extrêmement fort. Les travaux menés à  différents niveaux d’échelle (approche globale-locale) synthétisent un ensemble de connaissances acquises au niveau de la fonction assemblage de structures ou de systèmes mécaniques complexes. Le développement de modèles de calcul analytiques et faiblement numériques reproduisant avec une bonne fiabilité le comportement mécanique de l’assemblage structurel a débouché vers la création d’outils d’assistance exploitables dès la phase préliminaire de conception.

  • Projet ANR-IRT St-Exupéry Assemblages Innovants phase 1 (2015-2018) et phase 2 (2018-2021) : projet impliquant 5 partenaires académiques et 7 partenaires industriels. Travaux de recherche sur le lot 3 (assemblage par bague expansée collée) en collaboration avec le laboratoire I2M de Bordeaux.

 

Virtual Structural Testing du procédé d’assemblage aéronautique.
La définition et la mise en œuvre de la méthodologie « Virtual Testing » (expérimentation virtuelle), consiste à  améliorer la prédictibilité et de la fiabilité des résultats de la simulation numérique appliquée aux assemblages boulonnés. Pour exemple, ci-joint deux projets qui sont associés à  cette thématique :

  • Projet européen MAAXIMUS : simulation du procédé de mise en forme de fixations aveugles dans les structures aéronautiques (partenariat avec AIRBUS), période du projet : 2008-2011.
  • Projet FUI AAP13 CARAB (Conception Avancée Robuste pour les Assemblages Boulonnés) co-labellisé par 3 pôles de compétitivité (Astech, Aerospace Valley et System@tic), période du projet : 2012-2016.
  • Research project H2020, Clean Sky 2 RODEO (Robotized Orbital Drilling Equipment and Optimized residual stresses) that involves 3 industrial partners (PRECISE France – project leader, MITIS Engineering, KUKA Systems Aerospace France) and 2 academic partners (University of Nantes, University Toulouse 3), H2020-CS2-CFP03-2016-01 project 738219, 2017-2020 (https://rodeo-orbital.eu/).

 

Responsable de l’axe transverse « Assemblages » (ASM)



Activités d'enseignement :

– Conception mécanique (niveau M1)
– Bureau d’études et CAO (niveau L3 et M1)
– Initiation au calcul par Eléments Finis (niveau L3 et M1)



Responsabilités collectives :

Niveau national

  • Membres du comité de direction et du conseil d’administration du réseau S-mart (www.s-mart.fr)
  • Membre du comité scientifique du Groupement d’Intérêt Scientifique (GIS) S-mart
    (www.s-mart.fr)

 

Niveau Local (Université de Toulouse)

  • Directeur adjoint du pôle AIP-PRIMECA Toulouse (www.aip-primeca-occitanie.fr).
  • Membre du conseil d’administration du CRITT Mécanique et Composites de Toulouse (période 2007-2013) (www.mecanique-composite.com).

 

Niveau Local (INSA de Toulouse)



Autre :

Expertises pour des instances nationales

  • Membre Expert HCERES, campagne d’évaluation 2016-2017 (vague C), les laboratoires de recherche ROBERVAL (UMR CNRS 7337) et d’Electromécanique de Compiègne (EA 1006) de l’UTC
  • Membre Expert HCERES, campagne d’évaluation 2018-2019 (vague E), établissement Supmeca – Institut supérieur de mécanique de Paris (CMDEE-200007637).

 

Membre de comités scientifiques

  • Colloque National AIP-PRIMECA 2005, 2007, 2009, 2011, 2012, 2015, 2017, 2019, 2021 (www.s-mart.fr).
  • Congrès International IDMME Virtual Concept 2008, 2010.
  • Joint Conference on Mechanical Design Engineering & Advanced Manufacturing 2014, 2016, 2018, 2020 (http://www.jcm2020ct.com)
  • Congrès International CPI, Maroc, 2009, 2011, 2013, 2015, 2019, 2021.
  • Congrès International CMSM, Tunisie, 2013, 2017, 2019.
  • Congrès International ICAV, Tunisie, 2018, 2020.
  • Colloque SUPMECA : Les Assemblages Mécaniques (St-Ouen) 2015, 2017, 2019
    (https://sf2m.fr/events/les-assemblages-mecaniques-evolutions-recentes-et-perspectives/).

 

Membre organisateur de colloques de recherche

  • Colloque National AIP-PRIMECA 2012.
  • Joint Conference on Mechanical Design Engineering & Advanced Manufacturing 2014.


Production scientifique :
92 contributions trouvées

AnnéeTypeAuteurs et titre du documentLiens
2023 ACL Charly Foissac, Alain Daidié, Stéphane Segonds, Clément Chirol. Towards smart tightening in aeronautical assemblies Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science, SAGE Publications, 238(6), p.2362-2375 [HAL] / [BIB] / [DOI]
2023 COM Adeline Fau, Elias Delsol, Alain Daidié. Serrage 4.0 : Réalité augmentée et outils connectés pour une fiabilisation du procédé d'assemblage S-MART 2023 : 18ème Colloque national S.mart, Carry-le-Rouet, FR [HAL] / [BIB]
2023 ACL Guillaume Pichon, Alain Daidié, Eric Paroissien, Audrey Benaben. Quasi-static strength and fatigue life of aerospace hole-to-hole bolted joints Engineering Failure Analysis, Elsevier, 143, p.106860 [HAL] / [BIB] / [DOI]
2022 COM Roselane Hammoum, Adeline Fau, Alain Daidié, Frédéric Lachaud. Modèle analytique généralisé aux assemblages de brides cylindriques boulonnées 25e Congrès Français de Mécanique, Nantes, FR [HAL] / [BIB]
2022 COM Guillaume Pichon, Lyne Meouchy, Alain Daidié, Eric Paroissien, Audrey Benaben. Etude numérique du comportement mécanique d’assemblage hole-to-hole sous sollicitation quasi statique 25ème Congrès Français de Mécanique 2022, Nantes, FR [HAL] / [BIB]
2022 COM Yann Landon, Alexandra Lacombe, Landry Arnaud Kamgaing Souop, Alain Daidié, Manuel Paredes, Audrey Benaben, Clément Chirol. Correlations between the hole surface integrity and fatigue life for drilled 2024-T351 aluminum alloy International Joint Conference on Mechanics, Design Engineering and Advanced Manufacturing, Ischia (NA), IT [HAL] / [BIB]
2022 COM Guillaume Pichon, Alain Daidié, Éric Paroissien, Audrey Benaben, Clément Chirol. Experimental and Numerical Investigations of Mechanical Behaviour for Titanium Bolted Joints with Friction Shim International Joint Conference on Mechanics, Design Engineering & Advanced Manufacturing, p.827-838, Ischia, IT [HAL] / [BIB] / [DOI]
2022 ACL Yann Landon, Alexandra Lacombe, Landry Arnaud Kamgaing Souop, Alain Daidié, Manuel Paredes, Clément Chirol, Audrey Benaben. Impact of the drilling process on the surface integrity and residual fatigue strength of 2024-T351 aluminum parts Procedia CIRP, ELSEVIER, 108, p.459 - 464 [HAL] / [BIB] / [DOI]
2021 CO Charly Foissac, Alain Daidié, Stephane Segonds, Clément Chirol. Smart Tightening Development for Aeronautical Bolted Assemblies in an Industry 4.0 p.419-425 [HAL] / [BIB] / [DOI]
2021 CO Guillaume Pichon, Alain Daidié, Adeline Fau, Clément Chirol, Audrey Benaben. Cold Working Process on Hard Metal Stacked Assembly p.41-47 [HAL] / [BIB] / [DOI]
2021 COM Charly Foissac, Alain Daidié, Stéphane Segonds, Clément Chirol. Vers un serrage intelligent dans les assemblages aéronautiques 17ème colloque national S-mart AIP-PRIMECA, LAVAL VIRTUAL WORLD, FR [HAL] / [BIB]
2021 COM Guillaume Pichon, Alain Daidié, Eric Paroissien, Audrey Benaben. Influence des jeux et des désalignements sur un assemblage simple cisaillement 17ème colloque national S-mart AIP-PRIMECA, LAVAL VIRTUAL WORLD, FR [HAL] / [BIB]
2021 ACL Wafaa El Masnaoui, Alain Daidié, Frederic Lachaud, Christian Paleczny. Semi-analytical model development for preliminary study of 3D woven Composite/Metallic flange bolted assemblies Composite Structures, Elsevier, 255, p.112906 [HAL] / [BIB] / [DOI]
2020 ACL Marion Broutelle, Frederic Lachaud, Ludovic Barriere, Alain Daidié, Alexandre Chardonneau, Florent Bouillon. Bearing damage identification in oxide/oxide ceramic matrix composite with a new test design Composite Structures, Elsevier, 236, p.111902 1-17 [HAL] / [BIB] / [DOI]
2020 ACL Simon Vandevelde, Alain Daidié, Marc Sartor. Use of 1D mechanical and thermal models to predetermine the heat transferable by a thermal interface material layer in space applications Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science, SAGE Publications, p.095440622091550/1-15 [HAL] / [BIB] / [DOI]
2020 CO Ahmed Haddar, Louis Augustins, Alain Daidié, Emmanuel Rodriguez, Jean-Frédéric Diebold. Development of Semi-analytical Models for Aircraft Wheel Assembly Design p.13-28 [HAL] / [BIB] / [DOI]
2019 COM Landry Arnaud Kamgaing Souop, Yann Landon, Johanna Senatore, Alain Daidié, Mathieu Ritou. Orbital Drilling Optimization in High Speed Machining and Fatigue Life Enhancement by Orbital Roller Burnishing: Application to an Aluminum Alloy SAE International Conference, p.1-13, Bordeaux, FR [HAL] / [BIB] / [DOI]
2019 CO Vincent Rafik, Alain Daidié, Bertrand Combes, Clément Chirol. Simplified Analysis of the Early Stage Self-loosening of a Shear-Loaded Bolted Joint 8, p.169-175 [HAL] / [BIB] / [DOI]
2019 ACL Simon Vandevelde, Alain Daidié, Marc Sartor. Evaluation and optimization of heat transfer at the interfaces of spacecraft assemblies CEAS Space Journal, Springer, 11(2), p.185–191 [HAL] / [BIB] / [DOI]
2019 CO V. Rafik, Bertrand Combes, Alain Daidié, C. Chirol. Experimental and Numerical Study of the Self-loosening of a Bolted Assembly p.85-94 [HAL] / [BIB] / [DOI]
2019 COM Ahmed Haddar, Alain Daidié, Emmanuel Rodriguez, Louis Augustins, Jean-Frédéric Diebold, Jérémy Hardy. Modèle analytique d’un assemblage boulonné soumis à un chargement fortement excentré 16e Colloque National S-mart/AIP-PRIMECA, p.1-6, Les Karellis - 73870 MONTRICHER ALBANNE, FR [HAL] / [BIB]
2018 COM W El Masnaoui, Alain Daidié, Frederic Lachaud, C Paleczny. ANALYTICAL MODEL BEHAVIOR FOR BOLTED METAL-3D WOVEN COMPOSITE JOINTS European Conference on Composite Materials, p.24 - 28, Athènes, GR [HAL] / [BIB]
2018 COM Landry Kamgaing Souop, Alain Daidié, Yann Landon, Johanna Senatore, Mathieu Ritou. Investigation of Aluminum Alloy Properties During Helical Roller Burnishing Through Finite Element Simulations and Experiments International Joint Conference on Mechanics, Design Engineering & Advanced Manufacturing, p.440-450, Carthagena, ES [HAL] / [BIB] / [DOI]
2018 COM Simon Vandevelde, Alain Daidié, Marc Sartor. Evaluation of heat transfer at the interface of spacecraft equipment 15e European Conference on Spacecraft Structures, Materials and Environmental Testing (ECSSMET 2018), Noordwijk, NL [HAL] / [BIB]
2018 O Alain Daidié, Pierre Chalandon, Henri-Paul Lieurade. Les assemblages mécaniques – Évolutions et perspectives 106(3), p.301 [HAL] / [BIB] / [DOI]
2017 COM Julie Lecomte, Chloé Dupleix-Couderc, Corinne Marccuzzo, Christophe Bois, Alain Daidié. A robust numerical model for the pre-design of composite reinforcement by expanded bonded bushing (EB²) MECHCOMP3 – 3rd International Conference of Mechanics of Composite 0, bologne, IT [HAL] / [BIB]
2017 COM Marion Broutelle, Frederic Lachaud, Chloé Dupleix-Couderc, Alain Daidié. Comportement en matage de composites à matrice céramique oxyde/oxyde Journées Nationales sur les Composites 2017, 77455 Champs-sur-Marne, FR [HAL] / [BIB]
2017 ACL Victor Achard, Alain Daidié, Manuel Paredes, Clément Chirol. Optimization of the Cold Expansion Process for Titanium Holes Advanced Engineering Materials, Wiley-VCH Verlag, 19(6), p.1500626 1-13 [HAL] / [BIB] / [DOI]
2017 COM Marion Broutelle, Frederic Lachaud, Chloé Dupleix-Couderc, Alain Daidié. Comportement en matage d'un CMC oxyde/oxyde JNC 20, Champs sur Marme, FR [HAL] / [BIB]
2017 P Vincent Rafik, Clément Chirol, Alain Daidié, Bertrand Combes. Understanding and optimization of the behavior of a bolted assembly integrating new constraints Airbus PhD Day, Filton, Grande-Bretragne, Filton, GB [HAL] / [BIB]
2017 COM Julien Cochet, Clément Chirol, Alain Daidié. Numerical simulation of the out-of-plane displacement during Cold-Expansion of Titanium plate Euromat 2017, Thessaloniki, GR [HAL] / [BIB]
2017 COM Vincent Rafik, Clément Chirol, Alain Daidié, Bertrand Combes. Numerical modelling of the self-loosening of a bolted assembly 11th International Conference on Advanced Computational Engineering and Experimenting ACE-X2017, Vienne, Autriche, Vienne, AT [HAL] / [BIB]
2017 COM Vincent Rafik, Alain Daidié, Bertrand Combes. Numerical study of the screw-nut movement in the self-loosening process under transverses loading. Etude numérique du mouvement vis-écrou dans le dévissage spontané sous sollicitations transverses 15e colloque national AIP-PRIMECA, Plagne-Montalbert, FR [HAL] / [BIB]
2017 P Simon Vandevelde, Alain Daidié, Marc Sartor. Caractérisation et modélisation des matériaux d’interfaces thermiques aux assemblages boulonnés dans le domaine aérospatial Journées Annuelles SF2M 2017, Lyon, FR [HAL] / [BIB]
2016 ACL Folly Abevi, Alain Daidié, Michel Chaussumier, Stéphane Orieux. Static Analysis of an Inverted Planetary Roller Screw Mechanism Journal of Mechanisms and Robotics, American Society of Mechanical Engineers, 8(4), p.041020 1-14 [HAL] / [BIB] / [DOI]
2016 P Marion Broutelle, Frederic Lachaud, Chloé Dupleix-Couderc, Alain Daidié. Endommagements des assemblages boulonnées en composite à matrice céramique oxyde/oxyde Journée des thèses 2016 IRT Saint-Exupéry, Toulouse, FR [HAL] / [BIB]
2016 ACL Olfa Ksentini, Bertrand Combes, Mohamed Slim Abbes, Alain Daidié, Mohamed Haddar. Numerical study of self-loosening of a bolted assembly under transversal load Mechanics & Industry, EDP Sciences, 17(5), p.507 1-11 [HAL] / [BIB] / [DOI]
2016 COM Rémi Thanwerdas, Emmanuel Rodriguez, Alain Daidié, Marina Heim, Christophe Fabries. Industrial Equivalent Modelling of a Screw Assembly Subjected to a Thermal Load 14e European Conference on Spacecraft Structures, Materials and Environmental Testing (ECSSMET), p.1-15, Toulouse, FR [HAL] / [BIB]
2016 CO Rémi Thanwerdas, Emmanuel Rodriguez, Alain Daidié. Stiffness and slip laws for threaded fasteners subjected to a transversal load p.517-526 [HAL] / [BIB] / [DOI]
2016 O Xavier Fischer, Alain Daidié, Benoît Eynard, Manuel Paredes. Research in Interactive Design (Vol. 4) [HAL] / [BIB] / [DOI]
2016 ACL Victor Achard, Alain Daidié, Manuel Paredes, Clément Chirol. Cold expansion process on hard alloy holes-experimental and numerical evaluation Mechanics & Industry, EDP Sciences, 17(3), p.303 1-16 [HAL] / [BIB] / [DOI]
2016 CO Victor Achard, Alain Daidié, Manuel Paredes, Clément Chirol. Numerical modelling of the cold expansion process in mechanical stacked assemblies p.501-508 [HAL] / [BIB] / [DOI]
2015 ACL Folly Abevi, Alain Daidié, Michel Chaussumier, Marc Sartor. Static Load Distribution and Axial Stiffness in a Planetary Roller Screw Mechanism Journal of Mechanical Design, 138(1), p.012301 1-11 [HAL] / [BIB] / [DOI]
2015 COM Ahmed Hamdi, Florian Neveu, Alain Daidié, Pierre Stéphan, Théo Bernicot. Développement d’un modèle de calcul semi-analytique de brides cylindriques boulonnées sollicitées en chargement fortement excentré Les assemblages mécaniques : Evolutions récentes et perspectives, Saint-Ouen, FR [HAL] / [BIB]
2015 COM Rémi Thanwerdas, Emmanuel Rodriguez, Alain Daidié, Philippe Guy. Vers une industrialisation du modèle de frottement dynamique de LuGre. Application à des essais de glissement en condition de frottement sec. Vers une industrialisation du modèle de frottement dynamique de LuGre. Application à des essais de glissement statiques en condition de frottement sec 14e colloque national AIP-PRIMECA, La Plagne-Montalbert, Plagne-Montalbert, FR [HAL] / [BIB]
2015 COM Olfa Ksentini, Mohamed Haddar, Mohamed Slim Abbes, Bertrand Combes, Alain Daidié. Etude dynamique du dévissage spontané d’un assemblage soumis à des vibrations 14e colloque national AIP-PRIMECA, Plagne-Montalbert, FR [HAL] / [BIB]
2015 ACL Olfa Ksentini, Bertrand Combes, Mohamed Slim Abbes, Alain Daidié, Mohamed Haddar. Simplified model to study the dynamic behaviour of a bolted joint and its self loosening Structural Engineering and Mechanics, 55(3), p.639-654 [HAL] / [BIB] / [DOI]
2015 COM Taha Benhaddou, Alain Daidié, Pierre Stéphan, Clément Chirol, Jean-Baptiste Tuery. Optimization of fatigue behavior of metallic shear joints 12th International Conference on the Mechanical Behavior of Materials, ICM12, Karlsruhe, Germany, Karlsruhe, DE [HAL] / [BIB]
2015 P Alain Daidié, Emmanuel Rodriguez, R. Thanwerdas, P. Guy. Mesures de glissement par stéréo-vision dans des assemblages vissés soumis à une sollicitation transversale Les assemblages mécaniques : Evolutions récentes et perspectives. 1 et 2 juillet 2015, Supméca, Saint-Ouen, France, Saint-Ouen, FR [HAL] / [BIB]
2015 COM Victor Achard, Alain Daidié, Manuel Paredes, Clément Chirol. Optimization Of The Cold Expansion Process For Titanium Holes Advances in Materials and Processing Technologies, 2015, Madrid, Madrid, ES [HAL] / [BIB]
2015 COM Bruno Castanié, Alain Daidié, Christophe Bouvet, Victor Achard, Louis Adam. Application de la méthode de modélisation discrète des plis aux problématiques d'arrachement et de rupture trouée des structures stratifiées. Les assemblages mécaniques : Evolutions récentes et perspectives. 1 et 2 juillet 2015, Supméca, Saint-Ouen, France, Saint-Ouen, FR [HAL] / [BIB]
2014 CO Olfa Ksentini, Bertrand Combes, Mohamed Slim Abbes, Alain Daidié, Mohamed Haddar. Experimental Study of Bolted Joint Self-Loosening Under Transverse Load p.37-45 [HAL] / [BIB] / [DOI]
2014 CO Victor Achard, Alain Daidié, Manuel Paredes, Clément Chirol. Influence of the cold expansion process on fatigue performance of hard alloys holes 4, p.166-172 [HAL] / [BIB] / [DOI]
2014 CO Taha Benhaddou, Alain Daidié, Pierre Stéphan, Jean Guillot, Clément Chirol, Jean-Baptiste Tuery. Pretension influence on metallic shear joints 4, p.187-193 [HAL] / [BIB] / [DOI]
2014 ACL Taha Benhaddou, Clément Chirol, Alain Daidié, Jean Guillot, Pierre Stéphan, Jean-Baptiste Tuery. Pre-tensioning effect on fatigue life of bolted shear joints Aerospace Science and Technology, 36, p.36-43 [HAL] / [BIB] / [DOI]
2014 COM Olfaa Ksentini, Bertrand Combes, Mohamed Slim Abbes, Alain Daidié, Mohamed Haddar. 3D finite element model for the study of the dynamic behaviour of bolted joint self loosening International Conference Multiphysics Modelling and Simulation for Systems Design, Sousse, Tunisie, Sousse, TN [HAL] / [BIB]
2013 INV Pierre-Alain Boucard, Alain Daidié, Christian Paleczny. Stratégie multi-modèles pour le dimensionnement des assemblages boulonnés Modélisation et simulation des assemblages état de l'art - solutions - avancées, Paris, FR [HAL] / [BIB]
2013 COM O. Ksentini, Bertrand Combes, M.S. Abbes, Alain Daidié, M. Haddar. Behavior of single-lap bolted joint subjected to dynamic transverse load 5e Congrès International Conception et Modélisation des Systèmes Mécaniques, Djerba, Tunisie, Djerba, TN [HAL] / [BIB]
2012 ACL Louis Adam, Christophe Bouvet, Bruno Castanié, Alain Daidié, Elodie Bonhomme. Discrete ply model of circular pull-through test of fasteners in laminates Composite Structures, Elsevier, vol. 94, pp. 3082-3091 [HAL] / [BIB] / [DOI]
2012 ACL Louis Adam, Alain Daidié, Bruno Castanié, Elodie Bonhomme. Application of high-performance computing to a bolt static tensile test International Journal on Interactive Design and Manufacturing, Springer Verlag, 6(3), p.195-203 [HAL] / [BIB] / [DOI]
2012 COM F. Abevi, Michel Chaussumier, Alain Daidié. Répartition de charge dans une vis à rouleaux 13ème Colloque National Mont-Dore, Mont Dore, FR [HAL] / [BIB]
2012 CO Taha Benhaddou, Pierre Stéphan, Alain Daidié, Feras Alkatan, Clément Chirol, Jean-Baptiste Tuery. Effect of Axial Preload on Double-Lap Bolted Joints: Numerical Study p.769-776 [HAL] / [BIB] / [DOI]
2012 COM A. Berranger, Alain Daidié, M. Dijoud. Outils d'aide à la décision pour la conception des attaches pales - disques de roues de turbines 13ème Colloque National AIP PRIMECA, Le Mont Dore, France, 27-30 Mars, Mont Dore, FR [HAL] / [BIB]
2011 COM Louis Adam, Christophe Bouvet, Bruno Castanié, Alain Daidié, Elodie Bonhomme. Modélisation par éléments cohésifs de l'essai d'arrachement de fixations dans un stratifié 17èmes Journées Nationales sur les Composites (JNC17), p.22, Poitiers-Futuroscope, FR [HAL] / [BIB]
2011 COM A. Berranger, Alain Daidié, M. Dijoud. Développement d’outils pour la conception et le soutien en production des attaches pales – disques de roues de turbines CPI’2011, Oujda, Maroc, October 19-21, Oujda, MA [HAL] / [BIB]
2011 COM L. Adam, Christophe Bouvet, Bruno Castanié, Alain Daidié, E. Bonhomme. Experimental and numerical analysis of pull-through of fasteners in laminates ICCS16, Porto (Portugal), 28-30 juin, Porto, PT [HAL] / [BIB]
2011 COM F. Abevi, Michel Chaussumier, Alain Daidié, F. Bouillot. Comprehensive study of a normal elastic contact in a satellite roller screws device under static loading 4th International Congress CMSM’2011, Sousse, Tunisia, May 30 – June 1, Sousse, TN [HAL] / [BIB]
2011 COM G. Permuy, Alain Daidié. Study of the behavior of a complex revolute joint of aircraft landing gear 4th International Congress CMSM’2011, Sousse, Tunisia, May 30 – June 1, Sousse, TN [HAL] / [BIB]
2011 COM A. Berranger, Alain Daidié, M. Dijoud. Response surface based multi criteria optimization of turbine wheels fir-tree attachments 16th Blade Mechanics Seminar, Winterthur, Switzerland, September 14, Winterthur, CH [HAL] / [BIB]
2010 ACL Manuel Paredes, Alain Daidié. Optimal catalogue selection and custom design of belleville spring arrangements International Journal on Interactive Design and Manufacturing, Springer Verlag, 4(1), p.51-59 [HAL] / [BIB] / [DOI]
2010 COM F. Abevi, Michel Chaussumier, Alain Daidié. Contribution à l’étude du contact normal élastique dans un système de vis à rouleaux satellites d’actionneurs aéronautiques sous un chargement statique Journées Internationales Francophones De Tribologie, Albi (France), 27-28 Mai, Albi, FR [HAL] / [BIB]
2010 COM Alain Daidié. La ma\ⁱtrise du transfert de charge dans les éléments de liaison aéronautiques : quelle définition de modèles et d'outils d'assistance de prédimensionnement en phase de conception ? Colloque 3AF, Chatillon, France, 27 mai, Chatillon, FR [HAL] / [BIB]
2010 COM A. Berranger, Alain Daidié, O. Paulien-Camy. Mise en place d'Outils pour les Analyses de Fiabilité et de Robustesse des Attaches Pales – Disques de Turbomachines 6èmes Journées Nationales de Fiabilité JFMS’10, Toulouse, France, 24-26 Mars, Toulouse, FR [HAL] / [BIB]
2010 COM L. Adam, Alain Daidié, Bruno Castanié, E. Bonhomme. Explicit simulation and high-performance computing, application to a bolt tensile test IDMME-Virtual Concept 2010, Bordeaux, France, Bordeaux, FR [HAL] / [BIB]
2009 ACL Florestan Mathurin, Jean Guillot, Pierre Stéphan, Alain Daidié. 3D Finite Element Modeling of an Assembly Process With Thread Forming Screw Journal of Manufacturing Science and Engineering, American Society of Mechanical Engineers, 131(4), p.041015 [HAL] / [BIB] / [DOI]
2008 ACL Martin Cyr, Patrice Rivard, Francis Labrecque, Alain Daidié. High-Pressure Device for Fluid Extraction from Porous Materials: Application to Cement-Based Materials Journal of the American Ceramic Society, Wiley, 91(8), p.2653-2658 [HAL] / [BIB] / [DOI]
2008 ACL Youssef Fares, Michel Chaussumier, Alain Daidié. Étude comparative des caractéristiques mécaniques de boulons en acier 42CrMo4 de classe 8.8 selon le processus de fabrication Mécanique et Industries, Elsevier, 9(4), p.315-322 [HAL] / [BIB] / [DOI]
2008 ACL Jamel Chakhari, Alain Daidié, Zouhair Chaib, Jean Guillot. Numerical model for two-bolted joints subjected to compressive loading Finite Elements in Analysis and Design, Elsevier, 44(4), p.162-173 [HAL] / [BIB] / [DOI]
2008 ACL Dimitri Leray, Aurelian Vadean, Alain Daidié. Fast computation of preloaded bolted circular joint aiming at fatigue bolt sizing Engineering Computations, Emerald, 25(1), p.42-54 [HAL] / [BIB] / [DOI]
2008 ACL Alain Daidié, Zouhair Chaib, Antoine Ghosn. 3D Simplified Finite Elements Analysis of Load and Contact Angle in a Slewing Ball Bearing Journal of Mechanical Design, American Society of Mechanical Engineers, 130(8), p.082601 [HAL] / [BIB] / [DOI]
2007 ACL Alain Daidié, Jamel Chakhari, Ali Zghal. Numerical model for bolted T-stubs with two bolt rows Structural Engineering and Mechanics, Techno-press Ltd, 26(3), p.343-361 [HAL] / [BIB] / [DOI]
2007 ACL Feras Alkatan, Pierre Stéphan, Alain Daidié, Jean Guillot. Equivalent axial stiffness of various components in bolted joints subjected to axial loading Finite Elements in Analysis and Design, Elsevier, 43(8), p.589-598 [HAL] / [BIB] / [DOI]
2007 ACL Zouhair Chaib, Alain Daidié, Dimitri Leray. Screw behavior in large diameter slewing bearing assemblies: numerical and experimental analyses International Journal on Interactive Design and Manufacturing, Springer Verlag, 1(1), p.21-31 [HAL] / [BIB] / [DOI]
2007 ACL Martin Cyr, Alain Daidié. Optimization of a high-pressure pore water extraction device Review of Scientific Instruments, American Institute of Physics, 78(2), p.023906 [HAL] / [BIB] / [DOI]
2006 ACL V. Blanchot, Alain Daidié. Riveted assembly modelling: Study and numerical characterisation of a riveting process Journal of Materials Processing Technology, Elsevier, 180(1-3), p.201-209 [HAL] / [BIB] / [DOI]
2006 ACL Youssef Fares, Michel Chaussumier, Alain Daidié, Jean Guillot. Determining the life cycle of bolts using a local approach and the Dang Van criterion Fatigue and Fracture of Engineering Materials and Structures, Wiley-Blackwell, 29(8), p.588-596 [HAL] / [BIB] / [DOI]
2005 COM Didier Remond, Michèle Guingand, Lionel Roucoules, Alain Daidié, Manuel Paredes. L'enseignement de l’Ingénierie Simultanée par un « jeu collaboratif multimédia en réseau » 17e Congrès Français de Mécanique, p.1-6, Troyes, FR [HAL] / [BIB]
2005 ACL Manuel Paredes, Marc Sartor, Alain Daidié. Advanced assistance tool for optimal compression spring design Engineering with Computers, Springer Verlag, 21(2), p.140-150 [HAL] / [BIB] / [DOI]
2005 ACL Bertrand Tondu, Serge Ippolito, Jérémie Guiochet, Alain Daidié. A Seven-degrees-of-freedom Robot-arm Driven by Pneumatic Artificial Muscles for Humanoid Robots The International Journal of Robotics Research, SAGE Publications, 24(4), p.257-274 [HAL] / [BIB] / [DOI]
2004 COM Alain Daidié, M. Parades, L. Roucoules, B. Eynard, Didier Remond, Michèle Guingand, Nadège Troussier, E. Dore, S. Gomes. Application pédagogique de l'ingenierie simultanée à partir d'un simulateur dédié à la maquette numérique (MECAGORA) AIP-PRIMECA - Institut ouvert, FR [HAL] / [BIB]
2004 COM Didier Remond, A. Toumine, Nadège Troussier, Alain Daidié, Jean Pierre de Vaujany, J. Gomes, L. Roucoules. WEB educational portal for the teaching of mechanical design and manufacturing. EASED 2004 - In Perspectives from Europe and Asia on Engineering Design and Manufacture, 1782pp, CN [HAL] / [BIB]
2002 COM Nadège Troussier, Alain Daidié, Jean Pierre de Vaujany, B. Eynard, J. Gomes, Didier Remond, L. Roucoules, A. Toumine. Exemple d'application des TIC pour un projet de création de support pédagogique : OPALYS Congrès TICE 2002, FR [HAL] / [BIB]