Christine Boher
Professeur - Ecole Nationale Supérieure des Mines d'Albi-Carmaux (IMT Mines Albi) Membre du groupe Surfaces, Usinages, Matériaux et Outillages (SUMO) OM04, Mines d'Albi-Carmaux, Campus Jarlard 81013 Albi christine.boher@imt-mines-albi.fr (recherche) |
Activités de recherche :
Thèmes de recherche :
* Frottement et usure à température ambiante et hautes températures :
* Relation microstructure et endommagement sous sollicitations de frottement & Compréhension de mécanismes d’endommagement couplés par usure-oxydation et fatigue thermique
* Rôle des oxydes dans le phénomène de lubrification d’un contact soumis au frottemen (comportement thermo-mécanique des oxydes à hautes températures)
* Frottement et usure à grande vitesse & Etude des effets thermiques induits par le frottement
* Développement de modèles d’usure
– Procédés étudiés : Laminage, Forgeage, Injection Plastique, Emboutissage, Emboutissage à Chaud, Découpage à chaud, FSW, SLM (fabrication additive)
– Matériaux étudiés : Matériaux métalliques, Matériaux polymères, dépôts fins, revêtements
Encadrement de thèses :
Tarek YOUNSI: Comportement mécanique de rechargements obtenus par procédé de fabrication additive SLM : Thèse Ecole des Mines d’Albi, Ecole Doctorale MEGEP, Spécialité Génie Mécanique- Mécanique des Matériaux, 2017-2020
Directeur de thèse : Ch. BOHER (ICA-Albi),Co-encadrants: Adriana SOVEJA (ICA), Michel CHAUSSUMIER (ICA) & Vanessa VIDAL (ICA-Albi),
Morgane GEYER: Etude des relations entre paramètres de soudage et usure des outillages du procédé FSW sur la microstructure et les propriétés mécaniques d’une soudure Aluminium-TitaneThèse Ecole des Mines d’Albi, Ecole Doctorale MEGEP, Spécialité Génie Mécanique- Mécanique des Matériaux, 2017-2020
Directeur de thèse : Ch. BOHER (ICA-Albi), Co-directrice: Vanessa VIDAL (ICA-Albi)
Fatna BENMESSAOUD: Etude microstructurale et modélisation numérique du comportement multi-échelles du TiA6V4 sous sollicitations alternées et contact, Thèse Ecole des Mines d’Albi, Ecole Doctorale MEGEP, Spécialité Génie Mécanique- Mécanique des Matériaux, début 15 novembre 2016, fin attendue novembre 2019
Directeurs de thèse : F.REZAI-ARIA & M. CHEIKH (ICA-Albi), Co-encadrants: Vincent Velay (ICA-Albi), Vanessa VIDAL (ICA-Albi), Christine BOHER (ICA-Albi)
Romeu GOMES : Compréhension des mécanismes de dégradation des outillages de découpage à chaud de tôles d’acier auto-trempant au bore manganèse, Thèse Ecole des Mines d’Albi, Ecole Doctorale MEGEP, Spécialité Génie Mécanique- Mécanique des Matériaux, début octobre 2014, fin attendue décembre 2017
Directeur de thèse : Luc PENAZZI (ICA-Albi), Co-encadrante: Christine BOHER (ICA-Albi)
Elodie CABROL: Etude et compréhension des mécanismes d’endommagement de surface de matrices de forge à chaud rechargées, Thèse Ecole des Mines d’Albi, Ecole Doctorale MEGEP, Spécialité Génie Mécanique- Mécanique des Matériaux, soutenue le 11 décembre 2015, Prix HIRN 2016
Directeur de thèse : F.RÉZAI-ARIA (ICA-Albi), Co-encadrantes: Vanessa VIDAL (ICA-Albi), Christine BOHER (ICA-Albi)
Pauline LEPESANT : Conséquences tribologiques à haute température des interactions entre débit de 3° et de 1° corps : Micro-plasticité sous sollicitations tribologiques, Thèse INPT Toulouse , Ecole Doctorale MEGeP, Spécialité Génie Mécanique- Mécanique des Matériaux, soutenue le 19 avril 2013
Directeur de thèse : Yves BERTHIER (LaMCoS INA/Lyon), Co-directrice: Christine BOHER (ICA-Albi)
Guy-Léon KAZA : Thermique et endommagement des outils d’emboutissage à chaud, Thèse Université Paul Sabatier Toulouse 3 , Ecole Doctorale MEGeP, Spécialité Génie Mécanique- Mécanique des Matériaux, soutenue le 24 avril 2010
Directeurs de thèse : Gilles DOUR (ICA-Albi), T.LOULOU (RAPSODEE-Albi) Co-encadrants Luc PENAZZI (ICA-Albi), Christine BOHER (ICA-Albi)
Olivier JOOS : Compréhension des mécanismes d’endommagement couplés des cylindres de travail pour le laminage à chaud des alliages ferreux et non-ferreux, Thèse CIFRE (AKERS ) Ecole des Mines Paris Tech, Spécialité Sciences et Génie des Matériaux, soutenue le 16 octobre 2009
Directeur de thèse : F. RÉZAI-ARIA (ICA-Albi), Co-encadrante: Christine BOHER (ICA-Albi)
Tchadja KAGNAYA: Contribution à l’identification des mécanismes d’usure d’un WC-6%Co en usinage par une approche tribologique et thermique, Thèse Ecole des Mines Paris Tech, Spécialité Sciences et Génie des Matériaux, soutenue le 4 septembre 2009
Directeur de thèse ; T .CUTARD (ICA-Albi), Co-encadrantes: Christine BOHER (ICA-Albi), Laurence CAMPAGNE (INSIC-StDié), Myriam LAZARD (INSIC-StDié),
Olivier BARRAU : Étude du frottement et de l’usure d’acier à outils de travail à chaud, Thèse INPT Toulouse, Ecole Doctorale MEGeP, Spécialité Sciences et Génie des Matériaux,
soutenue le 14 décembre 2004 – Prix HIRN 2005
Directeurs de thèse : R.GRAS (SupMéca-ST Ouen) et F.RÉZAI-ARIA (ICA-Albi) Co-encadrante: Christine BOHER (ICA-Albi)
Djellali ATTAF : Mécanismes d’usure des outils d’emboutissage métalliques, Thèse Ecole des Mines Paris Tech, Spécialité Sciences et Génie des Matériaux, soutenue le 30 janvier 2003 – Mention Félicitations du jury
Directeur de thèse ; Ch. LEVAILLANT (ICA-Albi), Co-encadrants: Christine BOHER (ICA-Albi), Luc PENAZZI (ICA-Albi),
Catherine VERGNE : Étude des oxydes et analyse de leur comportement dans le frottement d’acier à outil de travail à chaud, Thèse Ecole des Mines Paris Tech, Spécialité Sciences et Génie des Matériaux, soutenue le 18 décembre 2001, Mention Félicitations du jury
Directeurs de thèse ; R. GRAS (SupMéca-ST Ouen) et C. LEVAILLANT (ICA-Albi), Co-encadrante: Christine BOHER (ICA-Albi)
Etienne DUGORD : Optimisation du traitement thermochimique de chromisation vis à vis de l’usure dans le cas d’un contact cylindre/cylindre, Thèse de Doctorat de l’Université Technologique de Compiègne (Spécialité mécanique appliquée, Acoustique et Matériaux), Soutenue le 28 septembre 1995
Directeur thèse : Pr LIEURADE (CETIM) Co-encadrante: Christine BOHER (DGA-Arcueil)
Accueil et Encadrement de Chercheurs Etrangers
Flavio DA SILVA: Role of the microstructure on high temperature sliding friction of High-Chromium white cast iron with various contents of Chromium and Molybdenum, Maître de conférence invité de L’Université Fédérale de Espirito Santo (UFES) – Brésil- Janvier 2011-Août 2011
Pedro CARNEIRO Sant’Anna: Chercheur invité de L’Université Fédérale de Espirito Santo (UFES) – Brésil- mai 2009 à novembre 2009
Cherlio SCANDIAN : Effect of molybdenum and chromium contents in sliding wear of high-chromium white cast iron: the relationship between microstructure and wear, Maître de conférence invité de L’Université Fédérale de Espirito Santo (UFES) – Brésil- septembre 2007 à février 2008
Malik TATA : Etude tribologique de la densification des alliages W2C-WC-Ni infiltrés, Chargé de cours à l’Université des Sciences et Technologies Houari Boumedienne d’Alger début Novembre 2006 –Décembre 2007
Activités d'enseignement :
Responsabilités pédagogiques:
– Responsable des enseignements :
– Matériaux métalliques pour aéronautique, filière apprentissage : IFIA /1A
– Mise en forme des matériaux métalliques, filière apprentissage : IFIA/2A
– Surfaces, filière apprentissage : IFIA/3A
– Surface Engineering : MASTER AEROMAT Innovation
– Responsable de l’Unité d’Enseignement « Ingénierie des Surfaces » Domaine I.M.A.S., cycle 3A, de la formation d »Ingénieurs filière étudiante
– Co-Responsable en formation sur la thématique fabrication additive à l’ICAA
Enseignements:
– Cours de tribologie : Domaine IMAS IFI (4A) + SMMx IFIA
– Lectures of Tribology MASTER AEROMAT Innovation
– TP Etat de surface + tribologie: Domaine IMAS IFI (3A)
– Cours / TD Sciences des Matériaux : IFI (1A,1A*)
– TD / TP Propriétés des matériaux : IFI (1A,1A*) + SMMx IFIA
– C/TD Mise en forme des matériaux métalliques: SMMx IFIA
– TP Chimie Analytique : IFI (1A,L1A*)
Responsabilités collectives :
Co-responsable du Groupe SUMO (Surface ,Usinage Matériaux et Outillages)
Déléguée des Missions Internationales Recherche du centre ICAA
Production scientifique :
81 contributions trouvéesAnnée | Type | Auteurs et titre du document | Liens |
---|---|---|---|
2024 | COM | Amaury Jacquot, Adriana Soveja, Yannick Le Maoult, Christine Boher, Manuel Marcoux, Christophe Escape. Numerical and experimental studies of molten pool phenomena influence on dissimilar materials coatings by L-PBF Material Forming, 41, p.12-21, Toulouse, FR | [HAL] / [BIB] / [DOI] |
2024 | ACL | Morgane Geyer, Marie-Noëlle Avettand-Fènoël, Vanessa Vidal, Farhad Rezai-Aria, Christine Boher. Multi-scale effects of the tool shape and length on the interfacial microstructure and the mechanical behaviour of Al2024/Ti-6Al-4V lap friction stir welds Journal of Manufacturing Processes, Society of Manufacturing Engineers, 113, p.360-372 | [HAL] / [BIB] / [DOI] |
2023 | COM | Amaury Jacquot, Adriana Soveja, Yannick Le Maoult, Christine Boher, Manuel Marcoux. Apport des caractérisations thermiques et thermo-optiques pour le renforcement du lien essais-calculs en fabrication additive SLM SFT 2023 - 31éme Congrès Français de Thermique 2023, p.257-266, Valenciennes, FR | [HAL] / [BIB] / [DOI] |
2023 | ACL | Christine Boher, Tarek Younsi, Adriana Soveja, Michel Chaussumier. Influence of iron dilution on plastic deformation mechanisms in cobalt-based alloys: Consequence of phase transformations on tribological behavior Wear, Elsevier, 524-525, p.204845 | [HAL] / [BIB] / [DOI] |
2023 | ACL | Manuelle Romero, Valdicleide Mello, Christine Boher, André Tschiptschin, Cherlio Scandian. On the tribological behavior of cobalt-based nanocomposite coatings containing ZnO@Graphene oxide core-shell nanoparticles Wear, Elsevier, 522, p.204835 | [HAL] / [BIB] / [DOI] |
2022 | ACL | Tarek Younsi, Christine Boher, Adriana Soveja. Influence of Interlayer Time on the Microstructural State of CoCrMo Coatings Applied by Selective Laser Melting on an Iron-based Substrate for Different Numbers of Layers Materials Today Communications, Elsevier, 32, p.103776 | [HAL] / [BIB] / [DOI] |
2021 | ACL | Morgane Geyer, Vanessa Vidal, Thomas Pottier, Christine Boher, Farhad Rezai-Aria. Investigations on the material flow and the role of the resulting hooks on the mechanical behaviour of dissimilar friction stir welded Al2024-T3 to Ti-6Al-4V overlap joints Journal of Materials Processing Technology, Elsevier, 292, p.1-15/117057 | [HAL] / [BIB] / [DOI] |
2019 | ACL | Elodie Cabrol, Christine Boher, Vanessa Vidal, Farhad Rezai-Aria, F. Touratier. A correlation between tribological behavior and crystal structure of cobalt-based hardfacings Wear, Elsevier, 426-427(Part B), p.996-1007 | [HAL] / [BIB] / [DOI] |
2019 | ACL | Christine Boher, Vanessa Vidal, Elodie Cabrol, Y. Berthier, Farhad Rezai-Aria. Shear mode M3 in the first sites of ductile metallic alloys: Some considerations on the physical mechanisms leading to internal particle flows Wear, Elsevier, 426-427(Part B), p.1152-1162 | [HAL] / [BIB] / [DOI] |
2019 | ACL | Fatna Benmessaoud, Vincent Velay, Mohammed Cheikh, Vanessa Vidal, Christine Boher, Farhad Rezai-Aria. Multi-Scale Numerical Analysis of the Effect of Microstructural Features on the Mechanical Behavior of Polycrystalline Ti-6Al-4V Alloy Chemical Engineering Transactions, AIDIC, 67(2), p.227 - 242 | [HAL] / [BIB] / [DOI] |
2018 | COM | F Benmessaoud, Mohammed Cheikh, Vincent Velay, Vanessa Vidal, Farhad Rezai-Aria, Christine Boher. SIMULATION MULTI-ECHELLE DU COMPORTEMENT MECANIQUE D’UN ALLIAGE DE TITANE TI-6AL-4V: Etude de L’influence de la Taille, la Dispersion Relative et la Texture Cristallographique des Grains ICEMAEP2018, Constantine, DZ | [HAL] / [BIB] |
2016 | COM | R. Gomes, Christine Boher, Luc Penazzi. Hot blanking tool wear assessment TOOL 2016 - 10th TOOL Conference, p.239-247, Bratislava, SK | [HAL] / [BIB] |
2016 | COM | R. Gomes, Christine Boher, Luc Penazzi. Hot blanking tools thermo-mechanical loading simulations NUMIFORM 2016 - The 12th International Conference on Numerical Methods in Industrial Forming Processes, p.3, Troyes, FR | [HAL] / [BIB] |
2016 | COM | Christine Boher, Vanessa Vidal, Vincent Velay, Farhad Rezai-Aria, E. Cabrol, F. Touratier, B. Prouzet, O. Brucelle. Résultats tribologiques de dépôts obtenus par différentes techniques HVOF, MIG, PTA & LASER 5e Conférence Internationale, de la projection thermique à la fabrication additive, 7 et 8 décembre - Pau- France - (2016), Pau, FR | [HAL] / [BIB] |
2016 | COM | E. Cabrol, Christine Boher, Vanessa Vidal, Farhad Rezai-Aria, F. Touratier. Wear mechanisms of hardfaced aeronautical high temperature forging tools ASMET - TOOL STEEL 2016, Bratislava, SK | [HAL] / [BIB] |
2015 | ACL | Elodie Cabrol, Christine Boher, Vanessa Vidal, Farhad Rezai-Aria, Franck Touratier. Plastic strain of cobalt-based hardfacings under friction loading Wear, Elsevier, 330(SI), p. 354-363 | [HAL] / [BIB] / [DOI] |
2015 | ACL | Kuniaki Dohda, Christine Boher, Farhad Rezai-Aria, Numpon Mahayotsanun. Tribology in metal forming at elevated temperatures review Friction, Springer, 3(1), p. 1-27 | [HAL] / [BIB] / [DOI] |
2015 | P | Luc Penazzi, Christine Boher, R. Gomes. Méthode d'étude des mécanismes de dégradation des lames de cisaillage à chaud Colloque Moules & Outils, École des Mines Albi-Carmaux, France, 15 & 16 octobre, Albi, FR | [HAL] / [BIB] |
2014 | COM | Karin Faria Pinho, Christine Boher, Yves Berthier, Cherlio Scandian, Farhad Rezai-Aria. Premiers mécanismes d'accommodation de vitesses actives dans un contact à haute température. Primary velocity accommodation mechanisms activated in a contact at high temperature JIFT 2014 - 26èmes Journées Internationales Francophones de Tribologie, p.35-42, Mulhouse, FR | [HAL] / [BIB] |
2014 | ACL | Tchadja Kagnaya, Laurence Lambert, Myriam Lazard, Christine Boher, Thierry Cutard. Investigation and FEA-based simulation of tool wear geometry and metal oxide effect on cutting process variables Simulation Modelling Practice and Theory, Elsevier, 42(SI), p. 84-97 | [HAL] / [BIB] / [DOI] |
2014 | ACL | Elodie Cabrol, Christine Boher, Vanessa Vidal, Farhad Rezai-Aria, Fabienne Touratier. A wear damage assessment of high temperature forging tool Advanced Materials Research, Trans Tech Publications, 966-967, p.103-110 | [HAL] / [BIB] / [DOI] |
2014 | ACL | Tchadja Kagnaya, Christine Boher, Laurence Lambert, Myriam Lazard, Thierry Cutard. Microstructural analysis of wear micromechanisms of WC-6Co cutting tools during high speed dry machining International Journal of Refractory Metals and Hard Materials, Elsevier, 42, p.151-162 | [HAL] / [BIB] / [DOI] |
2013 | ACL | Pauline Lepesant, Christine Boher, Yves Berthier, Farhad Rezai-Aria. A phenomenological model of the third body particles circulation in a high temperature contact Wear, Elsevier, 298-299, p.66-79 | [HAL] / [BIB] / [DOI] |
2013 | AP | Christine Boher, Jean-François Rouchon. Modélisation du contact et de l'usure : actes des Journées Internationales Francophones de Tribologie (JIFT 2010), Albi, France, du 27-28 mai 2010 512 p. | [HAL] / [BIB] |
2013 | ACL | Karin Faria Pinho, Christine Boher, Cherlio Scandian. Effect of molybdenum and chromium contents on sliding wear of high-chromium white cast iron at high temperature Lubrication Science, Wiley, 25(2), p.153-162 | [HAL] / [BIB] / [DOI] |
2013 | P | Christine Boher, E. Delbos. Revêtements durs Autolubrifiants pour Mécanismes soumis à des Déplacements Alternés en Milieu Aéronautique Colloque Bilan du Programme MatetPro, Nantes, 15 & 16 octobre, Nantes, FR | [HAL] / [BIB] |
2012 | COM | Pauline Lepesant, Christine Boher, Yves Berthier, Farhad Rezai-Aria. Identification of the Velocity Accommodation Mechanisms in a High Temperature Contact 9th International Tooling conference, p.455-462, Leoben, AT | [HAL] / [BIB] |
2012 | COM | Pauline Lepesant, Christine Boher, Yves Berthier, Farhad Rezai-Aria. A phenomenological model of the third body particles circulation in a high temperature contact Journées Internationales Francophones de Tribologie, aix-en-provence, FR | [HAL] / [BIB] |
2012 | ACL | Christine Boher, Sabine Le Roux, Luc Penazzi, C. Dessain. Experimental investigation of the tribological behavior and wear mechanisms of tool steel grades in hot stamping of a high-strength boron steel Wear, Elsevier, 294, p.286-295 | [HAL] / [BIB] / [DOI] |
2012 | ACL | Sabine Le Roux, Christine Boher, Luc Penazzi, C. Dessain, B. Tavernier. A methodology and new criteria to quantify the adhesive and abrasive wear damage on a die radius using white light profilometry Tribology International, Elsevier, 52, p.40-49 | [HAL] / [BIB] / [DOI] |
2011 | COM | Pauline Lepesant, Christine Boher, Yves Berthier, Farhad Rezai-Aria. Modèle phénoménologique de circulation des particules d'usure dans un contact à haute température Congrès MOULES &. OUTILS 2011, Albi, FR | [HAL] / [BIB] |
2011 | COM | Catherine Vergne, Olivier Joos, Claude Gaspard, José Tinoco, Mohammed Moujib, Christine Boher, Farhad Rezai-Aria. Damage mechanisms of HSM work roll grades for roughing stands -Tribological approach Abrasion 2011 -Abrasion wear resistant alloyed white cast irons for rolling and pulverizing mills, p.193-200, Liege, BE | [HAL] / [BIB] |
2011 | COM | Christine Boher, Luc Penazzi, Sabine Le Roux, V. Lucin, S. Tovar, C. Dessain, B. Tavernier. Etude de la dégradation à hautes températures de matériaux d’outils d’emboutissage vis-à vis d’une tôle USIBOR 1500P revêtue AluSi : quantification expérimentale de l’adhésion Congrès Moules et Outils, Albi, FR | [HAL] / [BIB] |
2011 | ACL | Tchadja Kagnaya, Myriam Lazard, Laurence Lambert, Christine Boher, Thierry Cutard. Temperature evolution in a WC-6% Co cutting tool during turning machining : experiment and finite element simulations WSEAS Transactions on Heat and Mass Transfer, World Scientific and Engineering Academy and Society (WSEAS), 6(3), p.71-80 | [HAL] / [BIB] |
2010 | COM | Tchadja Kagnaya, Laurence Lambert, Christine Boher, Thierry Cutard, Myriam Lazard, Laurent Velnom. Endommagement du WC-Co en usinage Matériaux 2010, 11 p., Nantes, FR | [HAL] / [BIB] |
2010 | COM | Bertrand Prouzet, Eric Delbos, Christine Boher, Vincent Debout, Olivier Brucelle. Etude des propriétés de frottement d'un dépôt cermet allié ou non à des particules lubrifiantes sur une pièce aéronautique. Study of friction properties of a cermet deposit with or without lubricating particles on an aeronautical part JIFT 2010 - Journées Internationales Francophones de Tribologie, p.187-193, Albi, FR | [HAL] / [BIB] |
2010 | COM | Emeline Bessard, Vincent Velay, Christine Boher, Vincent Debout, Olivier Brucelle. Comportement tribologique d'un revêtement muni de particules lubrifiantes : expérimentation et modélisation. Coating tribological wear with lubricating particles : experiments and modelling JIFT 2010 - Journées Internationales Francophones de Tribologie, p.417-426, Albi, FR | [HAL] / [BIB] |
2010 | COM | J. Rhismany, Christine Boher, Farhad Rezai-Aria. Etude des mécanismes et modélisation de l'usure de matériaux ductiles. Study and modeling of wear of ductile materials JIFT 2010 - Journées Internationales Francophones de Tribologie, p.491-501, Albi, FR | [HAL] / [BIB] |
2010 | COM | Tchadja Kagnaya, Christine Boher, Laurence Lambert, Myriam Lazard, Thierry Cutard. Mécanismes d'endommagement tribologiques du WC-6% CO en usinage. Wear mechanisms of WC-6% CO by machining JIFT 2010 - Journées Internationales Francophones de Tribologie, p.355-360, Albi, FR | [HAL] / [BIB] |
2010 | P | Luc Penazzi, Sabine Le Roux, V. Lucin, J.-M. Mouys, S. Tovar, J.-P. Arcens, Christine Boher. Etude des dégradations des outils démboutissage et estimation des volumes dúsure Colloque Des J. Internationales Francophones De Tribologie, Albi, 27-28 Mai 2010, Albi, FR | [HAL] / [BIB] |
2010 | P | G. Kaza, Christine Boher, G. Dour, T. Loulou, P. Carré, Luc Penazzi. Influence des paramètres de rugosité pour la modélisation de la résistance thermique de contact à l\'interface tôle-outil en emboutissage à chaud Journées. Internationales Francophones De Tribologie, Albi, 27-28 Mai 2010, Albi, FR | [HAL] / [BIB] |
2009 | COM | Masood Shah, Catherine Mabru, Christine Boher, Sabine Le Roux, Farhad Rezai-Aria. An investigation of the crack propagation in tool steel X38CrMoV5 (AISI H11) in SE(T) specimens 8th International Tooling Conference (TOOL 2009), pp.1-9, Aachen, DE | [HAL] / [BIB] |
2009 | ACL | C. Scandian, Christine Boher, J. D. B. De Mello, Farhad Rezai-Aria. Effect of molybdenum and chromium contents in sliding wear of high‐chromium white cast iron: The relationship between microstructure and wear Wear, Elsevier, 267(1-4), p.401-408 | [HAL] / [BIB] / [DOI] |
2009 | ACL | Tchadja Kagnaya, Christine Boher, L. Lambert, M. Lazard, Thierry Cutard. Wear mechanisms of WC-Co cutting tools from high-speed tribological tests Wear, Elsevier, 267(5-8, 2, SI), p.890-897 | [HAL] / [BIB] / [DOI] |
2009 | ACL | M. Shah, Christine Boher, Sabine Le Roux, Farhad Rezai-Aria, Catherine Mabru. An investigation of the crack propagation in tool steel X38CrMoV5 (AISI H11) in SET specimens REVUE DE METALLURGIE‐CAHIERS D INFORMATIONS TECHNIQUES, 106(3), p.140-145 | [HAL] / [BIB] / [DOI] |
2009 | ACL | Masood Shah, Catherine Mabru, Christine Boher, Sabine Le Roux, Farhad Rezai-Aria. Crack Propagation in Tool Steel X38CrMoV5 (AISI H11) in SET Specimens Advanced Engineering Materials, Wiley, 11(9), p.746-749 | [HAL] / [BIB] / [DOI] |
2009 | ACL | Tchadja Kagnaya, Christine Boher, Laurence Lambert, Myriam Lazard, Thierry Cutard. Friction at high sliding speed of WC-6Co pin versus steel disc AISI 1045 : estimation of the contact temperature The international journal of multiphysics., Multi-Science Publishing, 3(2), p..141-153 | [HAL] / [BIB] / [DOI] |
2009 | ACL | Christine Boher, Olivier Barrau, R. Gras, Farhad Rezai-Aria. A wear model based on cumulative cyclic plastic straining Wear, Elsevier, 267(5-8), p.1087-1094 | [HAL] / [BIB] / [DOI] |
2008 | COM | Christine Dessain, Philipp Hein, Joël Wilsius, Luc Penazzi, Christine Boher, Jan Weikert. Experimental investigation of friction and wear in hot stamping of Usibor 1500P 1st International conference on hot sheet metal forming of high-performance steel, p.217-227, Kassel, DE | [HAL] / [BIB] |
2008 | COM | Guy Léon Kaza, Christine Boher, Gilles Dour, Luc Penazzi, Tahar Loulou. Contribution to the determination of the thermal contact resistance : algorithm of evaluation of the number of asperities involved in the contact NORDTRIB 2008 -13th Nordic Symposium on Tribology, 18 p., Tampere, FI | [HAL] / [BIB] |
2008 | COM | Masood Shah, Catherine Mabru, Christine Boher, Sabine Le Roux, Farhad Rezai-Aria. An investigation of the crack propagation in tool steel X38CrMoV5(AISI H11) in SET specimens JIP 2008 international conference on fatigue and plasticity : from mechanisms to design, pp. 1-8, Paris, FR | [HAL] / [BIB] |
2008 | COM | Masood Shah, Christine Boher, Farhad Rezai-Aria, Catherine Mabru. Propagation de fissure sur X38CrMoV5 sur éprouvettes à l'échelle réduite Colloque National MECAMAT Procédés de transformation des matériaux de structure, p.1-4, Aussois, FR | [HAL] / [BIB] |
2008 | ACL | Maelle Guichon, Christine Boher, Bouchra Hassoune Rhabbour, Fabrice Schmidt, Yves Baziard. Identification des contraintes de rupture et de cisaillement à l'interface polymère injecté-moule métallique à l'aide du test couronne Matériaux et Techniques, EDP Sciences [1970-....], 96(n°1-2), p.65-78 | [HAL] / [BIB] / [DOI] |
2007 | COM | Tchadja Kagnaya, Christine Boher, Laurence Lambert, Myriam Lazard, Thierry Cutard. Wear mechanism of WC-Co cutting tool from turning experiments and high speed tribological tests HSIMP 2007 -High Speed Industrial Manufacturing Processes, 8 p., Senlis, FR | [HAL] / [BIB] |
2007 | ACL | O. Joos, Christine Boher, C. Vergne, C. Gaspard, T. Nylen, Farhad Rezai-Aria. Assessment of oxide scales influence on wear damage of HSM work rolls Wear, Elsevier, 263(1), p.198-206 | [HAL] / [BIB] / [DOI] |
2007 | ACL | Farhad Rezai-Aria, Christine Boher, Gilles Dour, Pascal Lamesle, Sabine Le Roux. Endommagement et durée de vie des outillages de mise en forme à chaud Bulletin du cercle d'études des métaux, Cercle d'études des métaux (Saint-Etienne), 17(18), 8 p. | [HAL] / [BIB] |
2007 | ACL | Olivier Barrau, Christine Boher, René Gras, Farhad Rezai-Aria. Wear mechanisms and wear rate in a high temperature dry friction of AISI H11 tool steel : influence of debris circulation Wear, Elsevier, 263(1-6), p.160-168 | [HAL] / [BIB] / [DOI] |
2006 | COM | Catherine Vergne, Daniel Batazzi, Claude Gaspard, Tommy Nylen, Christine Boher. Contribution of laboratory tribological investigations on the performance appraisal of work rolls for hot strip mill Steel Rolling 2006 -9th international and 4th European conferences, 6 p., Paris La Défense, FR | [HAL] / [BIB] |
2006 | COM | Olivier Barrau, Christine Boher, René Gras, Farhad Rezai-Aria. A wear model based on tribological transformations of surfaces TOOL 06 -7th International tooling conference, 2, p.175-180, Torino, IT | [HAL] / [BIB] |
2006 | COM | Catherine Vergne, Christine Boher, Daniel Batazzi, Claude Gaspard, Tommy Nylen. Experimental investigations on the influence of oxidation of hot working roll grades on their tribological behaviour against a strip material : consequences at the industrial level TOOL 06 -7th International tooling conference, 1, p.367-375, Torino, IT | [HAL] / [BIB] |
2006 | ACL | C Vergne, Christine Boher, R Gras, Christophe Levaillant. Influence of oxides on friction in hot rolling: Experimental investigations and tribological modelling Wear, Elsevier, 260(9-10), p.957-975 | [HAL] / [BIB] / [DOI] |
2005 | COM | Maelle Guichon, Christine Boher, Fabrice Schmidt. A study of polymer-mold contact during injection molding cycle PPS 2005 -America's regional meeting of the Polymer Processing Society, 2 p., Quebec City, CA | [HAL] / [BIB] |
2005 | ACL | Christine Boher, D Attaf, Luc Penazzi, Christophe Levaillant. Wear behaviour on the radius portion of a die in deep-drawing: Identification, localisation and evolution of the surface damage Wear, Elsevier, 259(2, SI), p.1097-1108 | [HAL] / [BIB] / [DOI] |
2005 | COM | Olivier Barrau, Christine Boher, René Gras, Farhad Rezai-Aria. Identification d'un modèle d'usure basé sur les transformations tribologiques de surfaces / Identification of a wear model based on the tribological transformations of surfaces JIFT 2005 -Journées Internationales Francophones de Tribologie, p.211-218, Tarbes, FR | [HAL] / [BIB] |
2004 | COM | Christine Boher, Luc Penazzi, Pascal Lamesle. Surface damage comparison of forming tools in function of strip metal CIST'2004 -4th China international symposium on tribology, p.210-214, Xi'an, CN | [HAL] / [BIB] |
2004 | COM | Catherine Vergne, Pascal Lamesle, Christine Boher. X-Ray analysis of a tribological contact between two materials involving in hot strip mill EUROCORR 2004 -European Corrosion Congress, 5 p., Nice, FR | [HAL] / [BIB] |
2003 | COM | Laurent Thomas, Francis Teyssandier, Michel Ducarroir, Christine Boher, Laurent Autrique, Jean Marie Badie, René Berjoan. Microwave PACVD of low friction a-SiC coatings : from plasma characterization to material mechanical property Chemical Vapor Deposition XVI and EUROCVD 14, 1, p.359-364, Paris, FR | [HAL] / [BIB] |
2003 | ACL | Olivier Barrau, Christine Boher, R Gras, Farhad Rezai-Aria. Analysis of the friction and wear behaviour of hot work tool steel for forging Wear, Elsevier, 255(7-12), p.1444-1454 | [HAL] / [BIB] / [DOI] |
2002 | COM | Olivier Barrau, Christine Boher, Catherine Vergne, Farhad Rezai-Aria, René Gras. Investigations of friction and wear mechanisms of hot forging tool steels 6th international tooling conference, 1, p.81-94, Karlstad, SE | [HAL] / [BIB] |
2002 | COM | Djelali Attaf, Luc Penazzi, Christine Boher, Christophe Levaillant. Mechanical study of a sheet metal forming dies wear 6th international tooling conference, 1, p.179-189, Karlstad, SE | [HAL] / [BIB] |
2002 | COM | Djelali Attaf, Luc Penazzi, Christine Boher, Christophe Levaillant. Etude de la dégradation d'un bord de matrice d'outil en emboutissage : corrélation entre pression de contact et transfert de particules MECAMAT -Ecole de Mécanique des matériaux, p.192-195, Aussois, FR | [HAL] / [BIB] |
2001 | ACL | C Vergne, Christine Boher, Christophe Levaillant, R Gras. Analysis of the friction and wear behavior of hot work tool scale: application to the hot rolling process Wear, Elsevier, 250(1), p.322-333 | [HAL] / [BIB] / [DOI] |
2001 | COM | Djelali Attaf, Luc Penazzi, Christine Boher, Pascal Lamesle, Christophe Levaillant. Etude et analyse de la dégradation d'un bord de matrice d'outil en emboutissage MECAMAT, p.111-114, Aussois, FR | [HAL] / [BIB] |
2001 | COM | Catherine Vergne, Christine Boher, Christophe Levaillant, René Gras. Contribution des oxydes dans le frottement en mise en forme à chaud : application au laminage à chaud MECAMAT, p.271-274, Aussois, FR | [HAL] / [BIB] |
2001 | ACL | J Bergstrom, F Thuvander, Pierre Devos, Christine Boher. Wear of die materials in full scale plastic injection moulding of glass fibre reinforced polycarbonate Wear, Elsevier, 251(2), p.1511-1521 | [HAL] / [BIB] / [DOI] |
2000 | COM | Catherine Vergne, Christine Boher, René Gras. Etude des oxydes et analyse de leur comportement dans le frottement d'acier à outil de travail à chaud : application au laminage à chaud MECAMAT, 4 p., Aussois, FR | [HAL] / [BIB] |
1999 | COM | Pierre Devos, Christine Boher, J. J. Raymond, Sabine Le Roux, Jean-Paul Arcens, Matthias Wesselmann. Full scale wear study of polymer injection moulding tool surface 5th International conference on tooling, p.763-768, Leoben, AT | [HAL] / [BIB] |
1999 | ACL | Catherine Vergne, Christine Boher, Christophe Levaillant, René Gras. Etude des oxydes et analyse de leur comportement dans le frottement d'acier à outil de travail à chaud : synthèse bibliographique Bulletin du cercle d'études des métaux, Cercle d'études des métaux (Saint-Etienne), 16(19), p.3.1-3.10 | [HAL] / [BIB] |
1998 | ACL | Christine Boher, M Ducarroir, T Gregoire, S Scordo. Comportement en frottement sec de dépôts SiCx(H) (1,5 < x < 3) élaborés par PACVD micro-onde sur ACIER Annales de Chimie - Science des Matériaux, Lavoisier, 23(5-6), p.879-890 | [HAL] / [BIB] / [DOI] |
1997 | ACL | D Rats, L Vandenbulcke, Christine Boher, G Farges. Tribological study of diamond coatings on titanium alloys Surface and Coatings Technology, Elsevier, 94-95, p.555-560 | [HAL] / [BIB] / [DOI] |
1997 | ACL | G. Lederer, P. Ponthiaux, N. Celati, J. Vial, Christine Boher. Evolution des propriétés tribocorrosives du 316L dans un milieu Nacl Matériaux et Techniques, EDP Sciences [1970-....], p. 25-27 | [HAL] / [BIB] / [DOI] |