Activités de recherche :

Matériaux composites obtenus par la voie liquide (matrice thermodurcissables et inorganiques) : relations matériau, procédé, propriétés (mécaniques et thermiques)
Comportement viscoplastique des matériaux hétérogènes

Activités d'enseignement :

CAO, calcul de structures, simulation des procédés de mise en forme

Production scientifique :

69 contributions trouvées

Année	Type	Auteurs et titre du document	Liens
2023	COM	Thierry Canet, Gilles Dusserre, Thierry Cutard. A numerical method to simulate the intra-tows mechanical behaviour of oxide/oxide CMCs: coupling of a lattice with a FE continuum ECERS 2023 - XVIIIth Conference of the European Ceramic Society, Lyon, FR	[HAL] / [BIB]
2023	ACL	Gilles Dusserre, Thomas Pottier, Thierry Cutard. Contribution of high-temperature 3D-Digital Image Correlation to investigate the creep behaviour of refractory materials Open Ceramics, Elsevier, 15, p.100425	[HAL] / [BIB] / [DOI]
2022	COM	Gilles Dusserre. A Two-Temperature Model Based on Fin-Approximation for Transient Longitudinal Heat Transfer in Unidirectional Composite ESAFORM 2022 - 25th International Conference on Material Forming, 926, p.1882-1889, Braga, PT	[HAL] / [BIB] / [DOI]
2021	COM	Florian Boutenel, Gilles Dusserre, Anne Aimable, Thierry Chartier, Thierry Cutard. Mechanical behavior of a NextelTM 610/alumina-silica, oxide/oxide ceramic matrix composite EUROMAT 2021 - European Congress and Exhibition on Advanced Materials and Processes, Conférence donnée en virtuel, AT	[HAL] / [BIB]
2021	ACL	Florian Boutenel, Gilles Dusserre, Anne Aimable, Thierry Chartier, Thierry Cutard. Rheophysical study of dispersed alumina suspensions Powder Technology, Elsevier, 393, p.630-638	[HAL] / [BIB] / [DOI]
2021	ACL	Gilles Dusserre, Anaïs Farrugia, Thierry Cutard. Enabling pseudo-ductility in geopolymer based glass-ceramics matrix composites by slurry dilution Open Ceramics, Elsevier, 7, p.100156	[HAL] / [BIB] / [DOI]
2020	ACL	Anne Aimable, A Delomenie, Manuella Cerbelaud, Arnaud Videcoq, T. Chartier, Florian Boutenel, Thierry Cutard, Gilles Dusserre. An experimental and simulation study of heteroaggregation in a binary mixture of alumina and silica colloids Colloids and Surfaces A: Physicochemical and Engineering Aspects, Elsevier, 605, p.1-10/125350	[HAL] / [BIB] / [DOI]
2020	ACL	Florian Boutenel, Gilles Dusserre, Thierry Cutard. Strength Loss of Basalt-Based Mineral Fibers after Thermal Desizing Revue des composites et des matériaux avancés = Journal of Composite and Advanced Materials, IIETA, 30(3-4), p.115-122	[HAL] / [BIB] / [DOI]
2020	ACL	Gilles Dusserre, Anaïs Farrugia, Thierry Cutard. Rheology evolution of a geopolymer precursor aqueous suspension during aging International Journal of Applied Ceramic Technology, Wiley, 17(4), p.1802-1810	[HAL] / [BIB] / [DOI]
2019	P	Gilles Dusserre, Anaïs Farrugia, Thierry Cutard. EVOLUTION OF THE RHEOLOGICAL BEHAVIOUR OF AN AQUEOUS SUSPENSION OF GEOPOLYMERIC PRECURSORS DURING AGEING 10th International Conference on High Temperature Ceramic Matrix Composites (HT-CMC/10th), Bordeaux, FR	[HAL] / [BIB]
2019	P	Florian Boutenel, Anne Aimable, Gilles Dusserre, Thierry Cutard, Thierry Chartier. Formulation of oxide suspensions for liquid processing of ceramic matrix composites HT-CMC 10 - 10th International Conference on High Temperature Ceramic Matrix Composites, Bordeaux, FR	[HAL] / [BIB]
2019	COM	Florian Boutenel, Gilles Dusserre, Thierry Cutard. Influence du désensimage par traitement thermique sur les propriétés mécaniques de fibres de basalte JNC 21 : Journées Nationales sur les Composites 2019, 9 p., Bordeaux, FR	[HAL] / [BIB]
2019	COM	Philippe Olivier, Gilles Dusserre, Philippe Marguerès, Philippe Demont. Nanocomposites, composites à matrices nanochargées : conditions de mise en œuvre et propriétés.. Nanocomposites, nanofilled matrices composites: manufacturing conditions and properties JNC 21 : Journées Nationales sur les Composites 2019, 9 p., Bordeaux, Talence, FR	[HAL] / [BIB]
2019	P	Florian Boutenel, Gilles Dusserre, Thierry Cutard. Influence du désensimage par traitement thermique sur les propriétés mécaniques de fibres de basalte JNC 21 : Journées Nationales sur les Composites 2019, Bordeaux, FR	[HAL] / [BIB]
2019	COM	Léa Floch, Romain Guyard, Romain Léger, Quentin Govignon, Laurent Ferry, Florentin Berthet, Perrin Didier, Patrick Ienny, Gilles Dusserre. Suivi de santé, substitution matières et comportement au feu des stratifiés dans les structures marines : projet NESSIE Journée Industrielle IMT « Matériaux haute performance et écomatériaux dans les transports », Paris, FR	[HAL] / [BIB]
2019	ACL	Damien Mauduit, Gilles Dusserre, Thierry Cutard. Influence of temperature cycles on strength and microstructure of spray-deposited Si-Al CE9F alloy Mechanics of Materials, Elsevier, 131, p.93-101	[HAL] / [BIB] / [DOI]
2018	ACL	Fenglin Liang, Martial Sauceau, Gilles Dusserre, Jean-Louis Dirion, Patricia Arlabosse. Modelling of the rheological behavior of mechanically dewatered sewage sludge in uniaxial cyclic compression Water Research, IWA Publishing/Elsevier, 147, p.413-421	[HAL] / [BIB] / [DOI]
2018	COM	William Han, Florentin Berthet, Gilles Dusserre, Fabrice Schmidt. Modelling the shape of an adhesive joint during assembly. Modélisation de la forme d'un joint d'adhésif pendant l'assemblage ICSAAM 2018 - The 8th International Conference on Structural Analysis of Advanced Materials, Tarbes, FR	[HAL] / [BIB]
2018	COM	Laure Moretti, Gilles Dusserre, Bruno Castanié, Philippe Olivier. Analysis of the influence of the adhesive on process distortions of the co-bonded stringer foot specimens ECCM18 - 18th European Conference on Composite Materials, 8 p., Athènes, GR	[HAL] / [BIB]
2018	ASCL	Rogelio Cecena, Benjamin Boniface, Gilles Dusserre. Process optimization for high-temperature aerospace applications JEC Composites Magazine, JEC Group, p.27-29	[HAL] / [BIB]
2018	ACL	Raffaele D’elia, Gilles Dusserre, Sylvie del Confetto, Nicolas Eberling-Fux, Cédric Descamps, Thierry Cutard. Effect of dicumyl peroxide concentration on the polymerization kinetics of a polysilazane system Polymer Engineering and Science, Wiley-Blackwell, 58(6), p.859-869	[HAL] / [BIB] / [DOI]
2017	COM	Lilia Zemni, Gilles Dusserre, Gérard Bernhart, Benjamin Boniface. A study of cross-linking kinetics of cyanate ester resin ICCM 21 - 21th International Conference on Composite Materials, Xi'an, CN	[HAL] / [BIB]
2017	COM	Fenglin Liang, Martial Sauceau, Gilles Dusserre, Jean-Louis Dirion, Patricia Arlabosse. Identification of the rheological properties of mechanically dewatered sewage sludge from uniaxial compression tests SLUDGETECH 2017 - The IWA Specialist Conference on Sludge Management, 11 p., London, GB	[HAL] / [BIB]
2017	COM	Lilia Zemni, Gilles Dusserre, Gérard Bernhart, Benjamin Boniface. Etude cinétique de la réticulation d'une résine Cyanate Ester Journées Nationales sur les Composites 2017, 77455 Champs-sur-Marne, FR	[HAL] / [BIB]
2017	ACL	M.-Q. Thai, Fabrice Schmidt, Gilles Dusserre, Arthur Cantarel, L. Silva. BEM computation of 3D Stokes flow including moving front International Journal of Material Forming, Springer Verlag, 10(4), p.567-580	[HAL] / [BIB] / [DOI]
2017	ACL	Jacques Poirier, Eric Blond, Emmanuel de Bilbao, Rudy Michel, Antoine Coulon, Jean Gillibert, Michel Boussuge, Yang Zhang, David Ryckelynck, Gilles Dusserre, Thierry Cutard, Paul Leplay. New advances in the laboratory characterization of refractories : testing and modelling Metallurgical Research & Technology, EDP Sciences, 114(6), art. 610 - 16 p.	[HAL] / [BIB] / [DOI]
2017	ACL	Fenglin Liang, Martial Sauceau, Gilles Dusserre, Patricia Arlabosse. A uniaxial cyclic compression method for characterizing the rheological and textural behaviors of mechanically dewatered sewage sludge Water Research, IWA Publishing/Elsevier, 113, p.171-180	[HAL] / [BIB] / [DOI]
2016	ACL	Gilles Dusserre, Olivier Valentin, Fabien Nazaret, Thierry Cutard. Experimental and numerical investigation of the asymmetric primary creep of a fibre reinforced refractory concrete at 1200 degrees C Journal of the European Ceramic Society, Elsevier, 36(10), p. 2627-2639	[HAL] / [BIB] / [DOI]
2016	ACL	Raffaele d'Elia, Gilles Dusserre, Sylvie del Confetto, Nicolas Eberling-Fux, Cedric Descarnps, Thierry Cutard. Cure kinetics of a polysilazane system: Experimental characterization and numerical modelling European Polymer Journal, Elsevier, 76, p. 40-52	[HAL] / [BIB] / [DOI]
2016	ACL	Damien Mauduit, Gilles Dusserre, Thierry Cutard. Probabilistic rupture analysis of a brittle spray deposited Si–Al alloy under thermal gradient: Characterization and thermoelastic sizing guidelines Materials & Design, Elsevier, 95, p. 441-421	[HAL] / [BIB] / [DOI]
2015	COM	Damien Mauduit, Gilles Dusserre, Thierry Cutard. Temperature effect on the strength of a spray deposited Si-Al alloy for space application (abstract) International Conference on Composites and Nano Engineering, Chengdu, CN	[HAL] / [BIB]
2015	ACL	Gilles Dusserre. Modelling the hysteretic wale-wise stretching behaviour of technical plain knits European Journal of Mechanics - A/Solids, Elsevier, 51, p. 160-171	[HAL] / [BIB] / [DOI]
2015	CO	Gilles Dusserre, Gérard Bernhart. Knitting processes for composites manufacture p.27-53	[HAL] / [BIB] / [DOI]
2015	ACL	Jérémie Vignes, Fabrice Schmidt, Gilles Dusserre, Jean Frédéric Dalmasso. Numerical simulation of extruded clay paste compression International Journal of Material Forming, Springer Verlag, 8(1), p.111-118	[HAL] / [BIB] / [DOI]
2014	ACL	Laurent Robert, Gilles Dusserre. Assessment of Thermoset Cure-Induced Strains by Fiber Bragg Grating Sensor Polymer Engineering and Science, Wiley-Blackwell, 54(7), p. 1585-1594	[HAL] / [BIB] / [DOI]
2014	ACL	Laurent Robert, Gilles Dusserre. Anisothermal thermosetting resin cure monitored by optical fiber refractometer Polymer Engineering and Science, Wiley-Blackwell, 54(3), p. 626-635	[HAL] / [BIB] / [DOI]
2014	ACL	Laura Balea, Gilles Dusserre, Gérard Bernhart. Mechanical behaviour of plain-knit reinforced injected composites : effect of inlay yarns and fibre type Composites Part B: Engineering, Elsevier, 56, p.20-29	[HAL] / [BIB] / [DOI]
2014	ACL	Gilles Dusserre, Laura Balea, Gérard Bernhart. Elastic properties prediction of a knitted composite with inlaid yarns subjected to stretching A coupled semi-analytical model Composites Part A: Applied Science and Manufacturing, Elsevier, 64, p.185 - 193	[HAL] / [BIB] / [DOI]
2014	COM	M.Q. Thai, Fabrice Schmidt, Gilles Dusserre, Arthur Cantarel, L. Silva. Micro-scale modeling of resin flow by BEM- Permeability computation International conference on COmputational methods in Manufacturing Processes, Saint-Etienne, FR	[HAL] / [BIB]
2013	ACL	Renaud Gantois, Arthur Cantarel, Benoit Cosson, Gilles Dusserre, Jean-Noël Felices, Fabrice Schmidt. BEM-based models to simulate the resin flow at macroscale and microscale in LCM processes Polymer Composites, Wiley, 34(8), p.1235-1244	[HAL] / [BIB] / [DOI]
2013	COM	Bénédicte Reine, Jérémy Di Tomasou, Gilles Dusserre, Philippe Olivier. Study and simulation of thermal conductivity of organic matrix composites ICCM 19 - 19th International Conference on Composite Materials, p.3587-3596, Montreal, CA	[HAL] / [BIB]
2013	COM	Anaïs Farrugia, Gilles Dusserre, Thierry Cutard, Magali Rollin, Stéphanie Fouquet. Innovative glass-ceramic matrix composites : processing and characterization ICCM 19 - 19th International Conference on Composite Materials, p.6251-6259, Montreal, CA	[HAL] / [BIB]
2013	COM	Anaïs Farrugia, Gilles Dusserre, Thierry Cutard, Magali Rollin, Stéphanie Fouquet. Mise en oeuvre et caractérisation de composites innovants à matrice vitrocéramique. Processing and characterization of innovative glass-ceramic matrix composites JNC 18 - 18èmes Journées Nationales sur les Composites, 10 p., Nantes, FR	[HAL] / [BIB]
2013	COM	Bénédicte Reine, Jérémy Di Tomaso, Gilles Dusserre, Philippe Olivier. Etude et simulation de la conductivité thermique de matériaux composites à matrice organique. Study and simulation of thermal conductivity of organic matrix composites JNC 18 - 18èmes Journées Nationales sur les Composites, 10 p., Nantes, FR	[HAL] / [BIB]
2013	COM	Jérémie Vignes, Fabrice Schmidt, Gilles Dusserre, Jean Frederic Dalmasso. Effect of moisture on the behaviour of an extruded clay paste ESAFORM 2013 - 16th Annual ESAFORM conference on material forming, 554-557, p.2230-2236, Aveiro, PT	[HAL] / [BIB] / [DOI]
2013	ACL	Gilles Dusserre, F. Nazaret, Laurent Robert, Thierry Cutard. Applicability of image correlation techniques to characterise asymmetric refractory creep during bending tests Journal of the European Ceramic Society, Elsevier, 33(2), p.221-231	[HAL] / [BIB] / [DOI]
2012	COM	Pascal Beneditti, Gilles Dusserre, Thierry Cutard, Juliette Huez. Characterisation of an inorganic based resin for the liquid moulding processing of composites for intermediate temperature applications FPCM 11 -11th International conference on Flow Processes in Composite Materials, p.180-187, Auckland, NZ	[HAL] / [BIB]
2012	COM	Gilles Dusserre. Elastic properties of short fibres reinforced polymers in the vicinity of a weld line FPCM 11 -11th International conference on Flow Processes in Composite Materials, p.362-369, Auckland, NZ	[HAL] / [BIB]
2012	COM	Bénédicte Reine, Jérémy Di Tomaso, Gilles Dusserre, Philippe Olivier. Study of thermal behaviour of thermoset polymer matrix filled with micro and nanoparticles ECCM 15 -15th European Conference on Composite Materials, 9 p., Venice, IT	[HAL] / [BIB]
2012	COM	Anaïs Farrugia, Gilles Dusserre, Thierry Cutard, Magali Rollin. Processing glass-ceramic matrix composites by liquid moulding : characterisation of the rheology of a resin derived from a geopolymeric system ECCM 15 -15th European Conference on Composite Materials, 7 p., Venice, IT	[HAL] / [BIB]
2012	COM	Jérémie Vignes, Fabrice Schmidt, Gilles Dusserre, Olivier de Almeida, Jean Frederic Dalmasso. Numerical simulations of clay tiles compression ESAFORM 2012 - 15th International ESAFORM Conference on material forming, 504-506, p.1403-1408, Erlangen, DE	[HAL] / [BIB] / [DOI]
2012	P	A. Farrugia, Gilles Dusserre, Thierry Cutard, M. Rollin. Processing glass-ceramic matrix composites by liquid moulding: characterization of the rheology of a resin derived from a geopolymeric system ECCM 15 - 15th European Conference on Composite Materials, Venise (Italy), Venise, IT	[HAL] / [BIB]
2012	COM	L. Robert, Gilles Dusserre. Isothermal and non-isothermal thermoset cure and induced-strains monitored by optical fibre sensors European Workshop on the Use of Optical Fibres for the Monitoring of Composites Manufacturing Process, Toulouse, France, novembre, Toulouse, FR	[HAL] / [BIB]
2012	COM	O. Valentin, Gilles Dusserre, Thierry Cutard, F. Nazaret. Mechanical engineering simulation of asymmetric creep for ceramic materials with the Drucker-Prager model EUROGRESS - 55th International Colloquium Refractories, Aachen (Germany), Aachen, DE	[HAL] / [BIB]
2012	COM	Gilles Dusserre, Thierry Cutard. Comportement non-linéaire de bétons réfractaires renforcés de fibres. Journées spécialisées « Céramiques réfractaires », Mons (Belgique), 2012., Mons, FR	[HAL] / [BIB]
2011	ACL	Gilles Dusserre, Gérard Bernhart, Fabrice Schmidt, Gilles Dour. Evaluation of viscous and elastic parameters of a borosilicate glass above transition temperature using optical instrumented squeeze tests Journal of Non-Newtonian Fluid Mechanics, Elsevier, 166(21-22), p.1229-1238	[HAL] / [BIB] / [DOI]
2011	COM	Laura Balea, Gilles Dusserre, Gérard Bernhart. Composites à renfort tricoté : Relations entre contexture, nature du renfort et propriétés mécaniques du composite infusé 17èmes Journées Nationales sur les Composites (JNC17), p.139, Poitiers-Futuroscope, FR	[HAL] / [BIB]
2011	ACL	Renaud Gantois, Arthur Cantarel, Gilles Dusserre, Jean Noel Félices, Fabrice Schmidt. Mold Filling Simulation of Resin Transfer Molding Combining BEM and Level Set Method Applied Mechanics and Materials, Trans Tech Publications, 62, p.57-65	[HAL] / [BIB] / [DOI]
2011	ACL	Gilles Dusserre, Eric Jourdain, Gérard Bernhart. Effect of deformation on knitted glass preform in-plane permeability Polymer Composites, Wiley, 32(1), p.18-28	[HAL] / [BIB] / [DOI]
2010	COM	Laura Balea, Gilles Dusserre, Gérard Bernhart, Nicolas Dumont. Effect of inlay fibres on the behaviour of dry knitted fabrics and resulting composites ECCM 14 -14th European Conference on Composite Materials, 10 p., Budapest, HU	[HAL] / [BIB]
2010	COM	Gilles Dusserre, Laura Balea, Naoufel Ben Salem, Gérard Bernhart. Influence of knitted reinforcement on the composite mechanical behaviour ACMA 2010 -International symposium on composites and aircraft materials, 8 p., Marrakech, MA	[HAL] / [BIB]
2010	COM	Renaud Gantois, Arthur Cantarel, Gilles Dusserre, Jean-Noël Felices, Fabrice Schmidt. Mold filling simulation of resin transfer molding combining BEM and level set method ACMA 2010 -International symposium on composites and aircraft materials, 8 p., Marrakech, MA	[HAL] / [BIB]
2010	COM	Renaud Gantois, Arthur Cantarel, Gilles Dusserre, Jean-Noël Felices, Fabrice Schmidt. Numerical simulation of resin transfer molding using BEM and level set method ESAFORM 2010 -13th International ESAFORM conference on material forming, 4 p., Brescia, IT	[HAL] / [BIB]
2010	ACL	R. Gantois, Arthur Cantarel, Gilles Dusserre, Jean-Noël Felices, Fabrice Schmidt. Numerical simulation of resin transfer molding using BEM and level set method International Journal of Material Forming, Springer Verlag, 3(Supp 1), p.635-638	[HAL] / [BIB] / [DOI]
2009	COM	Laura Balea, Gilles Dusserre, Gérard Bernhart, Nicolas Dumont. Comportement mécanique de textiles tricotés techniques pour des applications composites = Mechanical behaviour of technical knitted fabrics for composite applications JNC 16, 10 p., Toulouse, FR	[HAL] / [BIB]
2009	ACL	Gilles Dusserre, Gilles Dour, Gérard Bernhart. In-situ determination of the heat flux density at the glass/mould interface during a glass pressing production cycle International Journal of Thermal Sciences, Elsevier, 48(2), p.428-439	[HAL] / [BIB]
2009	ACL	Renaud Gantois, Eric Jourdain, Gilles Dusserre. Recent patents on in-plane permeability measurement of LCM composite reinforcements Recent Patents on Engineering, Bentham Science, 3(2), p.109-116	[HAL] / [BIB] / [DOI]
2005	COM	Gilles Dusserre, Fabrice Schmidt, Gilles Dour, Gérard Bernhart. Thermo-mechanical stresses in cast steel dies during glass pressing process AMPT'2005 -8th International Conference on Advances in Materials and Processing Technologies, 4 p., Gliwice-WIsla, PL	[HAL] / [BIB]
2005	ACL	Gilles Dusserre, Fabrice Schmidt, Gilles Dour, Gérard Bernhart. Thermo-mechanical stresses in cast steel dies during glass pressing process Journal of Materials Processing Technology, Elsevier, 162(SI), p.484-491	[HAL] / [BIB] / [DOI]