Activités de recherche :

• Biomécanique :
  • Ingénierie tissulaire, jumeaux numériques pour le diagnostic patient
• Optimisation de process :
  • Stratégies et trajectoires
  • usinage,
  • fabrication additive (Wire and Arc Additive Manufacturing),
  • décollage avion.
  • Topologie d’outils de coupe.

Activités d'enseignement :

Fabrication (L3, M1, M2)

Automatique (L3, M1)

Conception, analyse de mécanisme (L3)

Fiabilité (L2)

 

 

Responsabilités collectives :

Responsable du master 2 Génie Mécanique en Aéronautique -parcours Production 2007-2017

Responsable du master 2 Génie Mécanique en Aéronautique -parcours Production depuis 2017

 

– Membre élu au Conseil Scientifique de l’UFR PCA de l’UPS 2003-07
– Membre élu du Bureau du Conseil Scientifique de l’UFR PCA 2003-07
– Membre élu au Conseil d’Administration de l’Université Paul Sabatier 2009-10
– Membre élu du Conseil de Département de Mécanique 2015-2018

– Membre élu au Conseil de la FSI (Faculté des Sciences et d’Ingénierie) de l’Université Paul
Sabatier. Depuis janvier 2016

– Membre élu à la Commission de Personnel de la FSI (Faculté des Sciences et d’Ingénierie) de
l’Université Paul Sabatier.

Activités administratives de soutien à la recherche :

– Membre élu au comité du groupe Modélisation des Systèmes et Microsystèmes Mécaniques de l’Institut Clément Ader 2010-2017

– Représentant UPS à la commission des RI de l’Institut Clément Ader depuis 2020

– Membre élu du Conseil d’Unité de l’ICA depuis 2021

Production scientifique :

61 contributions trouvées

Année	Type	Auteurs et titre du document	Liens
2023	ACL	Khaled Hallak, Fulbert Baudoin, Virginie Griseri, Florian Bugarin, Stephane Segonds, Severine Le Roy, Gilbert Teyssedre. Refining the physical description of charge trapping and detrapping in a transport model for dielectrics using an optimization algorithm COMPEL: The International Journal for Computation and Mathematics in Electrical and Electronic Engineering, Emerald	[HAL] / [BIB] / [DOI]
2022	ACL	Thibaut Paty, Nicolas Binaud, Stéphane Segonds, Hong Wang. Sensitivity Analysis of a Suspended Cable-Driven Parallel Robot to Design Parameters Journal of Mechanisms and Robotics, American Society of Mechanical Engineers, p.1-16	[HAL] / [BIB] / [DOI]
2022	ACL	A Giordano, A Diourté, C Bordreuil, Florian Bugarin, S Segonds. Thermal Scalar Field for Continuous three-dimensional Toolpath strategy using Wire Arc Additive Manufacturing for free-form thin parts Computer-Aided Design, Elsevier, 151	[HAL] / [BIB] / [DOI]
2022	ACL	Hema Aubeelack, Stéphane Segonds, Christian Bes, Thierry Druot, Joël Brezillon, Adrien Bérard, Marylène Duffau, Guillaume Gallant. Surrogate model development for optimized blended-wing-body aerodynamics Journal of Aircraft, American Institute of Aeronautics and Astronautics	[HAL] / [BIB]
2021	ACL	Florian Mitjana, Sonia Cafieri, Florian Bugarin, Stéphane Segonds, F Castanie, P Duysinx. Topological gradient in structural optimization under stress and buckling constraints Applied Mathematics and Computation, Elsevier, 409	[HAL] / [BIB] / [DOI]
2021	AP	Thibaut Paty, Nicolas Binaud, Stéphane Segonds. Sensitivity analysis of a suspended CDPR to design parameters	[HAL] / [BIB]
2021	AP	Thibaut Paty, Nicolas Binaud, Florian Bugarin, Stéphane Segonds. Accuracy of large-scale cable-driven parallel robot with universal joint pulleys	[HAL] / [BIB]
2021	ACL	Khaled Hallak, Fulbert Baudoin, Virginie Griseri, Florian Bugarin, Stephane Segonds. A New Approach for Optimizing a Bipolar Charge Transport Model for Dielectric Materials: Theoretical Framework IEEE Transactions on Dielectrics and Electrical Insulation, Institute of Electrical and Electronics Engineers, 28(3), p.872-879	[HAL] / [BIB] / [DOI]
2021	ACL	Thibaut Paty, Nicolas Binaud, Stéphane Caro, Stéphane Segonds. Cable-Driven Parallel Robot Modelling Considering Pulley Kinematics and Cable Elasticity Mechanism and Machine Theory, Elsevier, 159, p.104263	[HAL] / [BIB] / [DOI]
2021	CO	Charly Foissac, Alain Daidié, Stephane Segonds, Clément Chirol. Smart Tightening Development for Aeronautical Bolted Assemblies in an Industry 4.0 p.419-425	[HAL] / [BIB] / [DOI]
2021	COM	Charly Foissac, Alain Daidié, Stéphane Segonds, Clément Chirol. Vers un serrage intelligent dans les assemblages aéronautiques 17ème colloque national S-mart AIP-PRIMECA, LAVAL VIRTUAL WORLD, FR	[HAL] / [BIB]
2020	ACL	Khaled Hallak, Fulbert Baudoin, Virginie Griseri, Florian Bugarin, Stéphane Segonds. Numerical Optimization Applying Trust Region Algorithm to Optimize Parameters Related to Charge Transport Model in LDPE IEEE Transactions on Dielectrics and Electrical Insulation, Institute of Electrical and Electronics Engineers, 27(6), p.2048-2055	[HAL] / [BIB] / [DOI]
2020	COM	Khaled Hallak, Fulbert Baudoin, Virginie Griseri, Florian Bugarin, Stéphane Segonds. Influence of Metallization on the Barrier Height of Injection of Low Density Polyethylene Using Optimization Algorithm 2020 IEEE Conference on Electrical Insulation and Dielectric Phenomena (CEIDP), p.296-299, East Rutherford, US	[HAL] / [BIB] / [DOI]
2020	ACL	Adama Diourté, Florian Bugarin, Cyril Bordreuil, Stéphane Segonds. Continuous three-dimensional path planning (CTPP) for complex thin parts with wire arc additive manufacturing Additive Manufacturing, Elsevier, p.101622	[HAL] / [BIB] / [DOI]
2019	COM	Khaled Hallak, Fulbert Baudoin, Virginie Griseri, Florian Bugarin, Stéphane Segonds. Identification of a Unique Set of Parameter for the Charge Transport Model in LDPE Based on Mathematical Inverse Methods and Experimental Data 2019 IEEE Conference on Electrical Insulation and Dielectric Phenomena (CEIDP), p.761-764, Richland, US	[HAL] / [BIB] / [DOI]
2019	ACL	Iman Alhossen, Florian Bugarin, Stéphane Segonds, Fulbert Baudoin, G. Teyssedre. Use of Sobol indexes for efficient parameter estimation in a charge transport model IEEE Transactions on Dielectrics and Electrical Insulation, Institute of Electrical and Electronics Engineers, 26(2), p.584-592	[HAL] / [BIB] / [DOI]
2019	ACL	Menouar Azib, Fulbert Baudoin, Nicolas Binaud, Christina Villeneuve-Faure, G. Teyssedre, Florian Bugarin, Stéphane Segonds. Sensitivity analysis of the electrostatic interaction between the atomic force microscopy probe and a thin dielectric film with 3D-localized charge cloud Journal of Applied Physics, American Institute of Physics, 125, p.045305	[HAL] / [BIB] / [DOI]
2019	ACL	Arturo Gomez Ortega, Luis Corona Galvan, Mehdi Salem, Kamel Moussaoui, Stéphane Segonds, Sébastien Rouquette, Frédéric Deschaux-Beaume. Characterisation of 4043 aluminium alloy deposits obtained by wire and arc additive manufacturing using a Cold Metal Transfer process Science and Technology of Welding and Joining, Maney Publishing, 24(6), p.538-547	[HAL] / [BIB] / [DOI]
2018	COM	Menouar Azib, Fulbert Baudoin, Christina Villeneuve-Faure, G. Teyssedre, Nicolas Binaud, Florian Bugarin, Stéphane Segonds. Numerical Simulations for Sensitivity Analysis of the Electrostatic Force Curve on Charge Localization in 3D 2018 IEEE 2nd International Conference on Dielectrics (ICD), p.1-4, Budapest, HU	[HAL] / [BIB] / [DOI]
2018	ACL	Menouar Azib, Fulbert Baudoin, Nicolas Binaud, Christina Villeneuve-Faure, Florian Bugarin, Stéphane Segonds, G. Teyssedre. Numerical simulations for quantitative analysis of electrostatic interaction between atomic force microscopy probe and an embedded electrode within a thin dielectric: meshing optimization, sensitivity to potential distribution and impact of cantilever contribution Journal of Physics D: Applied Physics, IOP Publishing, 51, p.165302	[HAL] / [BIB] / [DOI]
2017	ACL	Yang Xu, Yann Landon, Stéphane Segonds, Yicha Zhang. A decision support model in mass customization Computers & Industrial Engineering, Elsevier, 114, p.11-21	[HAL] / [BIB] / [DOI]
2017	COM	Menouar Azib, Fulbert Baudoin, Nicolas Binaud, Florian Bugarin, Stéphane Segonds, G. Teyssedre, Christina Villeneuve-Faure. Inverse modelling for 3D Nano-localization of charges in thin dielectric 9ème Conférence Européenne sur les Méthodes Numériques en Electromagnétisme (NUMELEC), Paris, 15-17 Nov. 2017, pp. 1-2, Paris, FR	[HAL] / [BIB]
2017	ACL	I Alhossen, Christina Villeneuve-Faure, Fulbert Baudoin, Florian Bugarin, Stéphane Segonds. Sensitivity analysis of the electrostatic force distance curve using Sobol’s method and design of experiments Journal of Physics D: Applied Physics, IOP Publishing, 50(3)	[HAL] / [BIB] / [DOI]
2017	ACL	Stéphane Segonds, Philippe Seitier, Cyril Bordreuil, Florian Bugarin, Walter Rubio, Jean-Max Redonnet. An analytical model taking feed rate effect into consideration for scallop height calculation in milling with torus-end cutter Journal of Intelligent Manufacturing, Springer Verlag (Germany)	[HAL] / [BIB] / [DOI]
2017	COM	Fulbert Baudoin, Florian Bugarin, I. Alhossen, Stéphane Segonds, Gilbert Teyssedre. Parameters sensitivity analysis in charge transport model for dielectric materials using Sobol indexes 9ème Conférence Européenne sur les Méthodes Numériques en Electromagnétisme (NUMELEC 2017), 15-17 Nov. 2017, Paris (FRANCE), Paris, FR	[HAL] / [BIB]
2017	COM	Fulbert Baudoin, I. Alhossen, Florian Bugarin, Stéphane Segonds, Gilbert Teyssedre, Christian Laurent. A Variance Decomposition Method for Efficient Charge Transport Model Calibration 8th International Symposium on Electrical Insulating Materials (ISEIM), Sept. 11-15, 2017, Toyohashi City (JAPAN), p.478-481, Toyohashi City, JP	[HAL] / [BIB] / [DOI]
2016	COM	V. Bonnot, Yann Landon, Stéphane Segonds. Tool/Material Interferences Sensibility to Process and Tool Parameters in Vibration- Assisted Drilling International Joint Conference on Mechanics, Design Engineering & Advanced Manufacturing JCM, Catania, Italy, Catane, IT	[HAL] / [BIB]
2016	COM	Fulbert Baudoin, Séverine Le Roy, G. Teyssedre, Christian Laurent, I. Alhossen, Florian Bugarin, Stéphane Segonds, Nicolas Binaud. Parameters sensitivity analysis in charge transport model using Sobol indexes for optimization purpose IEEE International Conference on Dielectrics, Montpellier, FR	[HAL] / [BIB] / [DOI]
2016	ACL	Jean-Max Redonnet, Alejandro Gamboa Vázquez, Alberto Traslosheros Michel, Stéphane Segonds. Optimisation of free-form surface machining using parallel planes strategy and torus milling cutter Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture, SAGE Publications, 232(2), p.240-250	[HAL] / [BIB] / [DOI]
2016	ACL	K. Moussaoui, Stéphane Segonds, Walter Rubio, Michel Mousseigne. Studying the measurement by X-ray diffraction of residual stresses in Ti6Al4V titanium alloy Materials Science and Engineering: A, Elsevier, 667, p.340--348	[HAL] / [BIB]
2015	ACL	Sonia Djebali, Alexandre Perles, Sylvain Lemouzy, Stéphane Segonds, Walter Rubio, Jean-Max Redonnet. Milling plan optimization with an emergent problem solving approach Computers & Industrial Engineering, Elsevier, 87, p.506-517	[HAL] / [BIB] / [DOI]
2015	ACL	L. Jaeger, Stéphane Segonds, Christian Bes. Methodology Based on Multiagent for Solving Multidisciplinary Optimization Problem Under Uncertainty Journal of Aerospace Information Systems, American Institute of Aeronautics and Astronautics, 12(2), p.290--298	[HAL] / [BIB]
2015	ACL	S. Djebali, Stéphane Segonds, Jean-Max Redonnet, Walter Rubio. Using the global optimisation methods to minimise the machining path length of the free-form surfaces in three-axis milling International Journal of Production Research, Taylor & Francis, 53(17), p.5296--5309	[HAL] / [BIB]
2013	ACL	Jean-Max Redonnet, Sonia Djebali, Stéphane Segonds, Johanna Senatore, Walter Rubio. Study of the effective cutter radius for end milling of free-form surfaces using a torus milling cutter Computer-Aided Design, Elsevier, 45(6), p.951-962	[HAL] / [BIB] / [DOI]
2013	ACL	Stéphane Segonds, Jacques Masounave, Victor Songmene, Christian Bes. A simple analytical model for burr type prediction in drilling of ductile materials Journal of Materials Processing Technology, Elsevier, 213(6), p.971-977	[HAL] / [BIB] / [DOI]
2013	COM	Laure Jaeger, Tom Jorquera, Sylvain Lemouzy, Christian Gogu, Stéphane Segonds, Christian Bes. Uncertainty propagation in multi-agent systems for multidisciplinary optimization problems 10th World Congress on Structural and Multidisciplinary Optimization (WCSMO 10), pp. 1-10, Orlando, Florida, US	[HAL] / [BIB]
2013	ACL	L Jaeger, Christian Gogu, Stéphane Segonds. Aircraft Multidisciplinary Design Optimization Under Both Model and Design Variables Uncertainty Journal of Aircraft, American Institute of Aeronautics and Astronautics, 50, p.528 - 538	[HAL] / [BIB] / [DOI]
2013	ACL	Xavier Pessoles, Yann Landon, Stéphane Segonds, Walter Rubio. Optimisation of workpiece setup for continuous five-axis milling: application to a five-axis BC type machining centre International Journal of Advanced Manufacturing Technology, Springer Verlag, 65(1-4), p.67-79	[HAL] / [BIB] / [DOI]
2013	COM	S. Djebali, Stéphane Segonds, Jean-Max Redonnet, Walter Rubio. Using Clarke and Wright's Algorithm to Minimize the Machining Time of Free-Form Surfaces in 3-Axis Milling World Congress on Engineering, London, GB	[HAL] / [BIB]
2013	ACL	L. Jaeger, Christian Gogu, Stéphane Segonds, Christian Bes. Aircraft Multidisciplinary Design Optimization under both Model and Design Variables Uncertainty Journal of Aircraft, 50(2), p.528--538	[HAL] / [BIB] / [DOI]
2013	ACL	Stéphane Segonds, J. Masounave, V. Songmene, Christian Bes. A simple analytical model for burr type prediction in drilling of ductile materials. Journal of Materials Processing Technology, Elsevier, 213(6), p.971--977	[HAL] / [BIB] / [DOI]
2013	ACL	Stéphane Segonds, Christian Bes, Frederic Monies, Jean-Max Redonnet. Variability influence of machining context on tool tips wear estimation - Application to dry turning of 42CrMo4 steel International Journal of Manufacturing Research, 8(3), p.277 -- 295	[HAL] / [BIB] / [DOI]
2013	ACL	Johanna Senatore, Kamel Moussaoui, Stéphane Segonds, Frédéric Moniès, Walter Rubio. Analysis of drift in iso-scallop planning – Machining by regions International Journal of Advanced Manufacturing Technology, Springer Verlag, 67(1-4), p.719--732	[HAL] / [BIB] / [DOI]
2013	COM	L. Cot, Christian Bes, Christian Gogu, Stéphane Segonds. Structural airframe maintenance strategy comparison: a new approach 9th International Workshop on Structural Health Monitoring (IWSHM), Stanford, California (USA), 10-12th Sept., Stanford, California, US	[HAL] / [BIB]
2012	ACL	Christian Gogu, Youchun Qiu, Stéphane Segonds, Christian Bes. Optimization based algorithms for uncertainty propagation through functions with multidimensional output within evidence theory Journal of Mechanical Design, American Society of Mechanical Engineers, 134(10), p. 914	[HAL] / [BIB] / [DOI]
2012	ACL	Guillaume Cohen, Patrick Gilles, Stéphane Segonds, Michel Mousseigne, Pierre Lagarrigue. Thermal and mechanical modeling during dry turning operations International Journal of Advanced Manufacturing Technology, Springer Verlag, 58(1-4), p.133-140	[HAL] / [BIB] / [DOI]
2012	ACL	Xavier Pessoles, Jean-Max Redonnet, Stéphane Segonds, Michel Mousseigne. Modelling and optimising the passage of tangency discontinuities in NC linear paths Int J Adv Manuf Technol, 58(5-8), p.631--642	[HAL] / [BIB] / [DOI]
2012	COM	L. Jaeger, Christian Gogu, Stéphane Segonds, Christian Bes. Conception préliminaire avion avec prise en compte d’incertitudes de modèles et de paramètres 13ème Colloque National AIP-Primeca, Mont Dore, 27-30 mars, Mont Dore, FR	[HAL] / [BIB]
2012	ACL	Johanna Senatore, Stéphane Segonds, Walter Rubio, Gilles Dessein. Correlation between machining direction, cutter geometry and step-over distance in 3-axis milling: Application to milling by zones. Computer-Aided Design, Elsevier, 44(12), p.1151-1160	[HAL] / [BIB] / [DOI]
2011	COM	Laure Jaeger, Christian Gogu, Stéphane Segonds, Christian Bes. Optimisation multidisciplinaire sous incertitudes en conception préliminaire avion CFM 2011 - 20ème Congrès Français de Mécanique, Besançon, FR	[HAL] / [BIB]
2011	ACL	Patrick Gilles, Johanna Senatore, Stéphane Segonds, Frederic Monies, Walter Rubio. Determination of angular fields outside low and high collisions to mill free-form surfaces on 5-axis CNC Machines International Journal of Production Research, Taylor & Francis	[HAL] / [BIB] / [DOI]
2011	COM	Christian Gogu, Youchun Qiu, Stéphane Segonds, Christian Bes. Belief and plausibility approximation methods for multidimensional functions AIAA Non-Deterministic Approaches Conference, p. 2058, Denver, US	[HAL] / [BIB]
2011	COM	L. Jaeger, Christian Gogu, Stéphane Segonds, Christian Bes. Optimisation multidisciplinaire sous incertitudes en conception préliminaire avion 20ème Congrès Français de Mécanique, Besançon, 29 août - 2 sept., Besançon, FR	[HAL] / [BIB]
2011	COM	L. Jaeger, Christian Gogu, Stéphane Segonds, Christian Bes. Multidisciplinary optimization under uncertainty for preliminary aircraft sizing SAE 2011 Aerotech Congress, Toulouse, 18-21st October, Toulouse, FR	[HAL] / [BIB]
2010	ACL	Stéphane Segonds, Christian Gogu, Youchun Qiu, Christian Bes, A. Mauffrey. Design optimization under evidence based uncertainty with application to an engine connecting rod International Journal of Design and Innovation Research, IJDIR, 5(3), p. 77-91	[HAL] / [BIB]
2010	COM	B. Talgorn, S. Laporte, Christian Bes, Stéphane Segonds. One Engine Out Take-off Trajectory Optimization 10th AIAA Aviation Technology, Integration, and Operations Conference, Forth Worth, Texas (USA), 13-15 September, Fortworth, Texas, US	[HAL] / [BIB]
2009	COM	B. Talgorn, S. Laporte, Christian Bes, Stéphane Segonds. Optimization of Payload Multi-Step Strategy 9th AIAA Aviation Technology, Integration, and Operations Conference, Hilton Head, South Carolina (USA), 21-23 September, Hilton Head, South Carolina, US	[HAL] / [BIB]
2008	ACL	Guillaume Cohen, Stéphane Segonds, Michel Mousseigne, Pierre Lagarrigue. Tool flank wear influence on workpiece heating in dry machining International Journal of Machining and Machinability of Materials, Inderscience, 4(4), p.406	[HAL] / [BIB] / [DOI]
2007	COM	Zuhaitz Areitio, Guillaume Cohen, Jean-Michel Baleynaud, Stéphane Segonds, Pierre Lagarrigue. Approach of the Prediction of the Thermal Field within an element during the machining operations High Speed Machining, Sitxt International Conference. 21-22 March 2007, San Sebastián (Spain), San Sebastián, ES	[HAL] / [BIB]
2006	ACL	Stephane Segonds, Guillaume Cohen, Yann Landon, Frederic Monies, Pierre Lagarrigue. Characterising the behaviour of workpieces under the effect of tangential cutting force during NC turning Application to machining of slender workpieces Journal of Materials Processing Technology, Elsevier	[HAL] / [BIB]
2004	ACL	Yann Landon, Stéphane Segonds, Pierre Lascoumes, Pierre Lagarrigue. Tool positioning error (TPE) characterisation in milling International Journal of Machine Tools and Manufacture, Elsevier, 44(5), p.457-464	[HAL] / [BIB] / [DOI]