Thierry Cutard
Professeur - Ecole Nationale Supérieure des Mines d'Albi-Carmaux (IMT Mines Albi) Membre du groupe Matériaux et Structures Composites (MSC) 1M05, Mines d'Albi-Carmaux, Campus Jarlard 81013 Albi (recherche) |
Activités de recherche :
Les objectifs
majeurs de mes travaux de recherche sont de contribuer à établir une meilleure
connaissance et de meilleures prédictions des comportements de matériaux
inorganiques aux architectures microstructurales complexes, d’une part pour
disposer des outils permettant de piloter le comportement thermomécanique d’un
matériau par la conception de son architecture microstructurale, d’autre part
pour permettre la mise œuvre de démarches de dimensionnement et de prédiction
du comportement en service de structures. Il s’agit principalement de cermets,
de composites céramique-céramique particulaires, de composites à matrice
céramique et à fibres longues, de bétons réfractaires et de bétons réfractaires
renforcés de fibres métalliques et/ou minérales. Dans cette famille, les
hétérogénéités microstructurales sont le plus souvent volontaires et liées à
l’association de différents constituants à forts contrastes de propriétés,
majoritairement céramiques, afin de piloter le comportement thermomécanique des
matériaux résultants.
Trois orientations fortes
peuvent être dégagées dans mes activités de recherche :
– l’étude des évolutions
microstructurales en fonction de la température et de l’environnement,
– l’étude des
comportements thermomécaniques et de leurs liens avec les microstructures,
– la modélisation à
différentes échelles des comportements mécaniques à haute température.
L’expérimentation
scientifique a toujours été centrale dans mes activités de
recherche, d’une part du point de vue du développement de moyens d’essais et
d’autre part concernant l’établissement de stratégies expérimentales. Dans ce
domaine, les deux composantes fortes de mon expérience concernent les essais
mécaniques à haute température et l’observation des microstructures à
différentes échelles. J’ai piloté la création d’essais
mécaniques sur matériaux céramiques hétérogènes, au sein duquel ont été
développés et mis en place plusieurs équipements originaux qui permettent des
essais micromécaniques et macromécaniques jusqu’à 1600°C (essais d’extraction
de fibre, de traction, de flexion, de compression "¦).
Concernant
l’étude des évolutions microstructurales, une conséquence fréquente du développement
d’architectures complexes réside dans le fait que les matériaux résultants sont
souvent instables à haute température et connaissent des évolutions
microstructurales complexes. Les principales sources de ces évolutions sont
liées à l’activation de processus diffusionnels, aux changements d’état de
certaines phases, à des mécanismes de cristallisation voire au développement de
contraintes internes liées aux comportements dilatométriques différentiels des
différents constituants d’une architecture. Dans ce domaine, les approches que
je mène concernent l’identification puis la modélisation des processus physico-chimiques
et/ou mécaniques internes qui gouvernent ces évolutions.
L’étude
des comportements thermomécaniques et de leurs relations
avec les évolutions microstructurales constitue une dominante de ma thématique
de recherche sur les matériaux inorganiques aux architectures complexes. Ces comportements thermomécaniques sont
souvent complexes et évolutifs en raison du caractère hétérogène de ces
matériaux et du large domaine de températures dans lequel ils sont utilisés. Un
premier pan de cette dominante concerne la caractérisation de ces comportements
mécaniques dans une large gamme de températures. Les résultats obtenus ont
montré qu’une telle démarche permet d’améliorer la connaissance et la
compréhension de ces comportements et d’autre part de permettre leur
modélisation. Un second pan de cette dominante concerne l’étude des relations
entre les microstructures et les comportements thermomécaniques.
L’établissement de ces liens s’avère être déterminant dans la compréhension des
comportements mécaniques macroscopiques et des évolutions qu’ils peuvent
connaître en fonction de l’histoire thermique du matériau et/ou de
l’environnement.
Dans
le domaine de la modélisation et de la simulation numérique des comportements
thermomécaniques des matériaux inorganiques hétérogènes,
j’ai jusqu’à ce jour considéré deux approches distinctes. La première est une
approche micromécanique, qui repose sur la prise en compte de détails de
l’architecture des matériaux. Le comportement mécanique de sous-ensembles
architecturaux peut ainsi être étudié puis considéré pour prédire le
comportement d’ensembles plus macroscopiques. La seconde est une approche
macromécanique, basée sur la mécanique des milieux continus. La complémentarité
de ces deux approches est un atout dans la mesure o๠elle permet d’avoir une
vision du comportement de ces matériaux à différentes échelles. L’approche
micromécanique, très proche de la physique, conduit à un niveau de
compréhension avancé de l’incidence des mécanismes micromécaniques internes au
matériau sur son comportement macroscopique. L’approche macromécanique rend
possible la mise en œuvre de démarches prédictives du comportement de structures basés sur ce type de matériaux.
Activités d'enseignement :
–
Enseignements en Science des matériaux (filière formation initiale, Mines Albi))
– Enseignements sur les propriétés structurales des matériaux (filière formation initiale, Mines Albi))
– Enseignements en Génie des matériaux (filière formation continue, Mines Albi))
– Enseignements sur la mise en oeuvre et les propriétés des matériaux céramiques (filière formation initiale, Mines Albi))
– Enseignements en
mécanique des solides déformables et résistance des matériaux du bà¢timent (filière
formation par apprentissage, Mines Albi)
Responsabilités collectives :
– Directeur-Adjoint de l’Institut Clément ADER (du 1/1/2011 au 1/3/2019)
Activités administratives de soutien à la recherche :
– Co-chairman de la conférence ICSAM 2012 à Albi du 3 au 5 juillet 2012
(www.icsam2012.com)
Production scientifique :
141 contributions trouvéesAnnée | Type | Auteurs et titre du document | Liens |
---|---|---|---|
2023 | COM | Thierry Canet, Gilles Dusserre, Thierry Cutard. A numerical method to simulate the intra-tows mechanical behaviour of oxide/oxide CMCs: coupling of a lattice with a FE continuum ECERS 2023 - XVIIIth Conference of the European Ceramic Society, Lyon, FR | [HAL] / [BIB] |
2023 | COM | Julien Granier, Thierry Cutard, P.C. Pinet, Yannick Le Maoult, Thierry Sentenac, Serge D. Chevrel. Effect of varying the proportion of crystalline-amorphous phases in a lunarregolith analog and resulting physical properties for isru selective laser melting 11th European lunar Symposium (ELS 2023), Proceedings European lunar Symposium 11th, Padoue, IT | [HAL] / [BIB] |
2023 | ACL | Anh Tuan Le, Quentin Govignon, Samuel Rivallant, Thierry Cutard. Mode I and mode II fracture behavior in nano‐engineered long fiber reinforced composites Polymer Composites, Wiley, 44(7), p.4016-4026 | [HAL] / [BIB] / [DOI] |
2023 | ACL | Aissatou Ndong, Thierry Cutard, Ange Nzihou, Martin Piotte, Jean-Christophe Cadot, Doan Pham Minh. Dynamic characterization approach for the investigation of microstructural changes in clay-based materials during firing Open Ceramics, Elsevier, 13, p.100326 | [HAL] / [BIB] / [DOI] |
2023 | ACL | Anh Tuan Le, Quentin Govignon, Samuel Rivallant, Thierry Cutard. Nano-engineered prepreg manufacturing: control of capillary rise of resin into VACNTs’ forests Carbon Letters, Springer, 33, p.1019-1025 | [HAL] / [BIB] / [DOI] |
2023 | ACL | Anh Tuan Le, Quentin Govignon, Samuel Rivallant, Thierry Cutard. Composite laminates reinforced by vertically aligned carbon nanotubes: Detailed manufacturing process, from nanotubes transfer to composite consolidation Journal of Composite Materials, SAGE Publications, 57, p.4239–4253 | [HAL] / [BIB] / [DOI] |
2023 | ACL | Gilles Dusserre, Thomas Pottier, Thierry Cutard. Contribution of high-temperature 3D-Digital Image Correlation to investigate the creep behaviour of refractory materials Open Ceramics, Elsevier, 15, p.100425 | [HAL] / [BIB] / [DOI] |
2022 | COM | Danijela Stupar, Thierry Cutard, K. Kyunghwan, Sylvain Lecler, Jocelyne Brendlé. Selective Laser Melting of various lunar soil simulants 2022 Spring Meeting - European Materials Research Society, En ligne, FR | [HAL] / [BIB] |
2022 | COM | J. Granier, Thierry Cutard, P. Pinet, Yannick Le Maoult, Thierry Sentenac, Serge D. Chevrel. Characterization and physical properties of a lunar regolith analog for powder bed fusion-based additive manufacturing processes European Lunar Symposium 10th, European Lunar Symposium 10th, p. 127-128, En ligne, FR | [HAL] / [BIB] |
2022 | ACL | Danijela Stupar, Grégoire Chabrol, Abdoul Razak, Sylvain Lecler, Alexandre Tessier, Thierry Cutard, Jocelyne Miehe-Brendle. Feasibility of additive manufacturing processes for lunar soil simulants Advanced Technologies & Materials, University of Novi Sad, 47(1), p.39-43 | [HAL] / [BIB] / [DOI] |
2022 | COM | Danijela Stupar, Grégoire Chabrol, Abdoul Razak Ibrahim Baraze, Thierry Cutard, Sylvain Lecler, Jocelyne Brendlé. Selective Laser Sintering (SLS) of various lunar soil simulants for Moon base manufacturing: experimental results and numerical modelling SPIE Photonics Europe, 2022, Strasbourg, France, Strasbourg, FR | [HAL] / [BIB] / [DOI] |
2022 | ACL | Margot Bonmatin, France Chabert, Gérard Bernhart, Thierry Cutard, Toufik Djilali. Ultrasonic welding of CF/PEEK composites: Influence of welding parameters on interfacial temperature profiles and mechanical properties Composites Part A: Applied Science and Manufacturing, Elsevier, 162, p.107074 | [HAL] / [BIB] / [DOI] |
2021 | COM | Danijela Stupar, Grégoire Chabrol, Abdoul Razak, Sylvain Lecler, Alexandre Tessier, Thierry Cutard, Jocelyne Miehe-Brendle. Feasibility of additive manufacturing processes for lunar soil simulants MMA 2021 - 14th International scientific conference MMA 2021 - Flexible technologies, p.223-227, Novi Sad, RS | [HAL] / [BIB] |
2021 | COM | Florian Boutenel, Gilles Dusserre, Anne Aimable, Thierry Chartier, Thierry Cutard. Mechanical behavior of a NextelTM 610/alumina-silica, oxide/oxide ceramic matrix composite EUROMAT 2021 - European Congress and Exhibition on Advanced Materials and Processes, Conférence donnée en virtuel, AT | [HAL] / [BIB] |
2021 | COM | Mathieu Gibilaro, Laurent Massot, Christelle Chiron, Pierre Chamelot, Jean-Jacques Favier, Thierry Cutard, Yannick Le Maoult, Thierry Sentenac, P.C. C Pinet, S Chevrel. Isru taskforce in Toulouse toward in situ autonomous electrochemical and additive manufacturing processes of lunar 2021 NESF & ELS - 2021 NASA Exploration Science Forum & European Lunar Symposium, San Francisco, US | [HAL] / [BIB] |
2021 | ACL | Florian Boutenel, Gilles Dusserre, Anne Aimable, Thierry Chartier, Thierry Cutard. Rheophysical study of dispersed alumina suspensions Powder Technology, Elsevier, 393, p.630-638 | [HAL] / [BIB] / [DOI] |
2021 | ACL | Gilles Dusserre, Anaïs Farrugia, Thierry Cutard. Enabling pseudo-ductility in geopolymer based glass-ceramics matrix composites by slurry dilution Open Ceramics, Elsevier, 7, p.100156 | [HAL] / [BIB] / [DOI] |
2020 | ACL | Florian Boutenel, Gilles Dusserre, Thierry Cutard. Strength Loss of Basalt-Based Mineral Fibers after Thermal Desizing Revue des composites et des matériaux avancés = Journal of Composite and Advanced Materials, IIETA, 30(3-4), p.115-122 | [HAL] / [BIB] / [DOI] |
2020 | ACL | Anne Aimable, A Delomenie, Manuella Cerbelaud, Arnaud Videcoq, T. Chartier, Florian Boutenel, Thierry Cutard, Gilles Dusserre. An experimental and simulation study of heteroaggregation in a binary mixture of alumina and silica colloids Colloids and Surfaces A: Physicochemical and Engineering Aspects, Elsevier, 605, p.1-10/125350 | [HAL] / [BIB] / [DOI] |
2020 | ACL | Gilles Dusserre, Anaïs Farrugia, Thierry Cutard. Rheology evolution of a geopolymer precursor aqueous suspension during aging International Journal of Applied Ceramic Technology, Wiley, 17(4), p.1802-1810 | [HAL] / [BIB] / [DOI] |
2019 | P | Gilles Dusserre, Anaïs Farrugia, Thierry Cutard. EVOLUTION OF THE RHEOLOGICAL BEHAVIOUR OF AN AQUEOUS SUSPENSION OF GEOPOLYMERIC PRECURSORS DURING AGEING 10th International Conference on High Temperature Ceramic Matrix Composites (HT-CMC/10th), Bordeaux, FR | [HAL] / [BIB] |
2019 | P | Florian Boutenel, Anne Aimable, Gilles Dusserre, Thierry Cutard, Thierry Chartier. Formulation of oxide suspensions for liquid processing of ceramic matrix composites HT-CMC 10 - 10th International Conference on High Temperature Ceramic Matrix Composites, Bordeaux, FR | [HAL] / [BIB] |
2019 | COM | Rébecca Bonnaire, Julien Patou, Emmanuel de Luycker, Thierry Cutard, Gérard Bernhart. Using X-Ray tomography to evaluate porosities in composite parts 24e Congrès Français de Mécanique (CFM 2019), Brest, FR | [HAL] / [BIB] |
2019 | COM | Anh Tuan Le, Philippe Olivier, Quentin Govignon, Alexandre Sangar, Pascal Boulanger, Samuel Rivallant, Thierry Cutard. Imprégnation et transfert de tapis de Nanotubes de Carbone Alignés Verticalement sur du préimprégné. Imprégnation et transfert de tapis de nanotubes de carbone alignés verticalement sur un préimprégné JNC 21 : Journées Nationales sur les Composites 2019, 9 p., Bordeaux, Talence, FR | [HAL] / [BIB] |
2019 | COM | Florian Boutenel, Gilles Dusserre, Thierry Cutard. Influence du désensimage par traitement thermique sur les propriétés mécaniques de fibres de basalte JNC 21 : Journées Nationales sur les Composites 2019, 9 p., Bordeaux, FR | [HAL] / [BIB] |
2019 | P | Florian Boutenel, Gilles Dusserre, Thierry Cutard. Influence du désensimage par traitement thermique sur les propriétés mécaniques de fibres de basalte JNC 21 : Journées Nationales sur les Composites 2019, Bordeaux, FR | [HAL] / [BIB] |
2019 | COM | Elise Lamic, Damien Mauduit, Fabien Nazaret, Rémi Gilblas, Thomas Pottier, Thierry Cutard. Series parts manufacturing by infrared superplastic forming with numerical techniques for thermal regulation Ti2019: The 14th world conference on titanium, 321(03025), 10 p., Nantes, FR | [HAL] / [BIB] / [DOI] |
2019 | ACL | Damien Mauduit, Gilles Dusserre, Thierry Cutard. Influence of temperature cycles on strength and microstructure of spray-deposited Si-Al CE9F alloy Mechanics of Materials, Elsevier, 131, p.93-101 | [HAL] / [BIB] / [DOI] |
2018 | COM | Julien Patou, Emmanuel de Luycker, Rébecca Bonnaire, Thierry Cutard, Gérard Bernhart. Influence of the forming process on the mechanical behavior of a commingled carbon PPS composite part 21st International ESAFORM Conference on Material Forming, 1960(1), p.020021-1, Palermo, IT | [HAL] / [BIB] / [DOI] |
2018 | ACL | Pierre-Marie Nigay, Ange Nzihou, Thierry Cutard. The impact of the particle size distribution of organic additives on the microstructure of a clay ceramic and its thermal and mechanical properties Journal of Materials in Civil Engineering, American Society of Civil Engineers, 30(4), p.04018044 | [HAL] / [BIB] / [DOI] |
2018 | ACL | Raffaele D’elia, Gilles Dusserre, Sylvie del Confetto, Nicolas Eberling-Fux, Cédric Descamps, Thierry Cutard. Effect of dicumyl peroxide concentration on the polymerization kinetics of a polysilazane system Polymer Engineering and Science, Wiley-Blackwell, 58(6), p.859-869 | [HAL] / [BIB] / [DOI] |
2017 | COM | Rébecca Bonnaire, Julien Patou, Emmanuel de Luycker, Thierry Cutard, Gérard Bernhart. Utilisation de la corrélation d'images pour le suivi de la mise en forme de renfort textile dans le cadre de la fabrication de pièces composites pour l'aéronautique 23ème Congrès Français de Mécanique, Lille, FR | [HAL] / [BIB] |
2017 | ACL | Pierre-Marie Nigay, Thierry Cutard, Ange Nzihou. The impact of heat treatment on the microstructure of a clay ceramic and its thermal and mechanical properties Ceramics International, Elsevier, 43(2), p.1747-1754 | [HAL] / [BIB] / [DOI] |
2017 | ACL | Pierre-Marie Nigay, Rababe Sani, Thierry Cutard, Ange Nzihou. Modeling of the thermal and mechanical properties of clay ceramics incorporating organic additives Materials Science and Engineering: A, Elsevier, 708, p.375-382 | [HAL] / [BIB] / [DOI] |
2017 | ACL | Jacques Poirier, Eric Blond, Emmanuel de Bilbao, Rudy Michel, Antoine Coulon, Jean Gillibert, Michel Boussuge, Yang Zhang, David Ryckelynck, Gilles Dusserre, Thierry Cutard, Paul Leplay. New advances in the laboratory characterization of refractories : testing and modelling Metallurgical Research & Technology, EDP Sciences, 114(6), art. 610 - 16 p. | [HAL] / [BIB] / [DOI] |
2016 | ACL | L. V. Korah, Pierre-Marie Nigay, Thierry Cutard, Ange Nzihou, S. Thomas. The impact of the particle shape of organic additives on the anisotropy of a clay ceramic and its thermal and mechanical properties Construction and Building Materials, Elsevier, 125, p. 654-660 | [HAL] / [BIB] / [DOI] |
2016 | ACL | Raffaele D'Elia, Gérard Bernhart, Jouke Hijlkema, Thierry Cutard. Experimental analysis of SiC-based refractory concrete in hybrid rocket nozzles Acta Astronautica, Elsevier, 126(SI), p. 168-177 | [HAL] / [BIB] / [DOI] |
2016 | ACL | Gilles Dusserre, Olivier Valentin, Fabien Nazaret, Thierry Cutard. Experimental and numerical investigation of the asymmetric primary creep of a fibre reinforced refractory concrete at 1200 degrees C Journal of the European Ceramic Society, Elsevier, 36(10), p. 2627-2639 | [HAL] / [BIB] / [DOI] |
2016 | ACL | Raffaele d'Elia, Gilles Dusserre, Sylvie del Confetto, Nicolas Eberling-Fux, Cedric Descarnps, Thierry Cutard. Cure kinetics of a polysilazane system: Experimental characterization and numerical modelling European Polymer Journal, Elsevier, 76, p. 40-52 | [HAL] / [BIB] / [DOI] |
2016 | ACL | Damien Mauduit, Gilles Dusserre, Thierry Cutard. Probabilistic rupture analysis of a brittle spray deposited Si–Al alloy under thermal gradient: Characterization and thermoelastic sizing guidelines Materials & Design, Elsevier, 95, p. 441-421 | [HAL] / [BIB] / [DOI] |
2015 | COM | Damien Mauduit, Gilles Dusserre, Thierry Cutard. Temperature effect on the strength of a spray deposited Si-Al alloy for space application (abstract) International Conference on Composites and Nano Engineering, Chengdu, CN | [HAL] / [BIB] |
2015 | ACL | Sabine Le Roux, Frédéric Deschaux-Beaume, Thierry Cutard, Philippe Lours. Quantitative assessment of the interfacial roughness in multi-layered materials using image analysis: Application to oxidation in ceramic-based materials Journal of the European Ceramic Society, Elsevier, 35(3), p.1063-1079 | [HAL] / [BIB] / [DOI] |
2015 | ASCL | Gérard Bernhart, Vincent Velay, Thierry Cutard. Moules pour formage superplastique du titane : matériaux, propriétés et conception Bulletin du cercle d'études des métaux, Cercle d'études des métaux (Saint-Etienne), 18(16), 20 p. | [HAL] / [BIB] |
2014 | COM | Pierre-Marie Nigay, Thierry Cutard, Ange Nzihou. Improvement of fired clay bricks properties through biomass incorporation WasteEng 2014 - 5th International Conference on Engineering for Waste and Biomass Valorisation, p.641-647, Rio de Janeiro, BR | [HAL] / [BIB] |
2014 | ACL | Raffaele d'Elia, Gérard Bernhart, Thierry Cutard, Gilles Peraudeau, Marianne Balat-Pichelin. Preliminary tests of silicon carbide based concretes for hybrid rocket nozzles in a solar furnace Acta Astronautica, Elsevier, 99, p.242-251 | [HAL] / [BIB] / [DOI] |
2014 | ACL | Tchadja Kagnaya, Laurence Lambert, Myriam Lazard, Christine Boher, Thierry Cutard. Investigation and FEA-based simulation of tool wear geometry and metal oxide effect on cutting process variables Simulation Modelling Practice and Theory, Elsevier, 42(SI), p. 84-97 | [HAL] / [BIB] / [DOI] |
2014 | ACL | Tarek Merzouki, Eric Blond, Nicolas Schmitt, M. Bouchetou, Thierry Cutard, Alain Gasser. Modelling of the swelling induced by oxidation in SiC-based refractory castables Mechanics of Materials, Elsevier, 68, p.68 (2014) 253-266 | [HAL] / [BIB] / [DOI] |
2014 | ACL | Tchadja Kagnaya, Christine Boher, Laurence Lambert, Myriam Lazard, Thierry Cutard. Microstructural analysis of wear micromechanisms of WC-6Co cutting tools during high speed dry machining International Journal of Refractory Metals and Hard Materials, Elsevier, 42, p.151-162 | [HAL] / [BIB] / [DOI] |
2013 | INV | Raffaele d'Elia, Gérard Bernhart, Thierry Cutard, Gilles Peraudeau, Marianne Balat-Pichelin. Investigation of the thermo-mechanical and ablative behaviour of silicon carbide based concretes exposed to hybrid propulsion environments 64th IAC - International Astronautical Congress, p.5905-5913, Beijing, CN | [HAL] / [BIB] |
2013 | COM | Anaïs Farrugia, Gilles Dusserre, Thierry Cutard, Magali Rollin, Stéphanie Fouquet. Innovative glass-ceramic matrix composites : processing and characterization ICCM 19 - 19th International Conference on Composite Materials, p.6251-6259, Montreal, CA | [HAL] / [BIB] |
2013 | COM | Anaïs Farrugia, Gilles Dusserre, Thierry Cutard, Magali Rollin, Stéphanie Fouquet. Mise en oeuvre et caractérisation de composites innovants à matrice vitrocéramique. Processing and characterization of innovative glass-ceramic matrix composites JNC 18 - 18èmes Journées Nationales sur les Composites, 10 p., Nantes, FR | [HAL] / [BIB] |
2013 | ACL | Gilles Dusserre, F. Nazaret, Laurent Robert, Thierry Cutard. Applicability of image correlation techniques to characterise asymmetric refractory creep during bending tests Journal of the European Ceramic Society, Elsevier, 33(2), p.221-231 | [HAL] / [BIB] / [DOI] |
2013 | ACL | Badis Haddag, Tchadja Kagnaya, Mohammed Nouari, Thierry Cutard. A new heat transfer analysis in machining based on two steps of 3D finite element modelling and experimental validation Heat and Mass Transfer, Springer Verlag, 49(1), p.129--145 | [HAL] / [BIB] / [DOI] |
2013 | INV | Gérard Bernhart, F. Nazaret, Thierry Cutard. Low cost refractory castable die development for titanium sheet superplastic forming COBEF 2013 , 7th Brasilian congress on manufacturing engineering, Penedo, Itatiaia – RJ, BR | [HAL] / [BIB] |
2012 | ACL | Vincent Velay, Thierry Cutard, N. Guegan. Thermal behaviour modelling of superplastic forming tools. Modellierung des thermischen verhaltens von superplastischen umformwerkzeugen Materials Science and Engineering Technology / Materialwissenschaft und Werkstofftechnik, Wiley-VCH Verlag, 43(9, SI), p.799-804 | [HAL] / [BIB] / [DOI] |
2012 | ACL | Aurélien Mazzoni, Gérard Bernhart, Thierry Cutard. Ceramic fibre reinforced refractory castables for very high temperature superplastic forming Materials Science and Engineering Technology / Materialwissenschaft und Werkstofftechnik, Wiley-VCH Verlag, 43(9, SI), p.758-762 | [HAL] / [BIB] / [DOI] |
2012 | COM | Pascal Beneditti, Gilles Dusserre, Thierry Cutard, Juliette Huez. Characterisation of an inorganic based resin for the liquid moulding processing of composites for intermediate temperature applications FPCM 11 -11th International conference on Flow Processes in Composite Materials, p.180-187, Auckland, NZ | [HAL] / [BIB] |
2012 | COM | Tarek Merzouki, Eric Blond, Nicolas Schmitt, Thierry Cutard, Alain Gasser, Emmanuel de Bilbao. MODELLING OF THE SWELLING OF SIC-BASED REFRACTORY LINING USED IN WASTE-TO-ENERGY PLANTS ASME 2012 11th Biennial Conference On Engineering Systems& Design And Analysis, p.82101, Nantes, FR | [HAL] / [BIB] |
2012 | COM | Thierry Cutard, Nicolas Donval, Fabien Nazaret, Nicolas Schmitt. Fibre reinforced refractory concrete as a tooling material for organic matrix composite processing routes ECCM 15 -15th European Conference on Composite Materials, 10 p., Venice, IT | [HAL] / [BIB] |
2012 | COM | Anaïs Farrugia, Gilles Dusserre, Thierry Cutard, Magali Rollin. Processing glass-ceramic matrix composites by liquid moulding : characterisation of the rheology of a resin derived from a geopolymeric system ECCM 15 -15th European Conference on Composite Materials, 7 p., Venice, IT | [HAL] / [BIB] |
2012 | COM | Tarek Merzouki, Eric Blond, Alain Gasser, Nicolas Schmitt, Thierry Cutard. Modelling of the oxidation induced strain of silicon-carbide-based refractories castables HTCPM 2012, p.Electronic file, Les Embiez, FR | [HAL] / [BIB] |
2012 | P | A. Farrugia, Gilles Dusserre, Thierry Cutard, M. Rollin. Processing glass-ceramic matrix composites by liquid moulding: characterization of the rheology of a resin derived from a geopolymeric system ECCM 15 - 15th European Conference on Composite Materials, Venise (Italy), Venise, IT | [HAL] / [BIB] |
2012 | COM | Thierry Cutard, G. Thévenin, O. Barrau, F. Nazaret. New coatings for SPF tools made of a metallic fibre reinforced refractory castable ICSAM2012, International Conference on Superplasticity of Advanced Materials ICSAM 2003, Albi (France), Albi, FR | [HAL] / [BIB] |
2012 | COM | O. Valentin, Gilles Dusserre, Thierry Cutard, F. Nazaret. Mechanical engineering simulation of asymmetric creep for ceramic materials with the Drucker-Prager model EUROGRESS - 55th International Colloquium Refractories, Aachen (Germany), Aachen, DE | [HAL] / [BIB] |
2012 | COM | Gilles Dusserre, Thierry Cutard. Comportement non-linéaire de bétons réfractaires renforcés de fibres. Journées spécialisées « Céramiques réfractaires », Mons (Belgique), 2012., Mons, FR | [HAL] / [BIB] |
2012 | P | Gérard Bernhart, G. Peraudeau, M. Balat-Pichelin, Thierry Cutard. Étude du comportement à très haute température de bétons réfractaires à base de SiC pour application en environnement de propulsion hybride Journées spécialisées « Céramiques réfractaires », Mons (Belgique), 2012., Mons, BE | [HAL] / [BIB] |
2011 | COM | N. Donval, Thierry Cutard, F. Nazaret, N. Schmitt. Comportement mécanique de bétons réfractaires fibrés 17èmes Journées Nationales sur les Composites (JNC17), p.190, Poitiers-Futuroscope, FR | [HAL] / [BIB] |
2011 | ACL | Tchadja Kagnaya, Myriam Lazard, Laurence Lambert, Christine Boher, Thierry Cutard. Temperature evolution in a WC-6% Co cutting tool during turning machining : experiment and finite element simulations WSEAS Transactions on Heat and Mass Transfer, World Scientific and Engineering Academy and Society (WSEAS), 6(3), p.71-80 | [HAL] / [BIB] |
2011 | CO | Gérard Bernhart, Philippe Lours, Thierry Cutard, Vincent Velay, Fabien Nazaret. Processes and equipment for superplastic forming of metals p.49-71 | [HAL] / [BIB] / [DOI] |
2010 | COM | Emmanuel de Bilbao, Eric Blond, Christine Michel, Thierry Cutard, N. Schmitt, J. Poirier. Identification du module d'Young de matériaux réfractaires à base SiC Matériaux 2010, p.CD, Nantes, FR | [HAL] / [BIB] |
2010 | COM | Tchadja Kagnaya, Laurence Lambert, Christine Boher, Thierry Cutard, Myriam Lazard, Laurent Velnom. Endommagement du WC-Co en usinage Matériaux 2010, 11 p., Nantes, FR | [HAL] / [BIB] |
2010 | COM | F. Nazaret, Thierry Cutard, O. Barrau. Damage and creep modelling for refractory structure sizing COM 2010 - 49th Annual Conference of Metallurgists, p. 397-410, Vancouver, CA | [HAL] / [BIB] |
2010 | COM | Nicolas Donval, Aurélien Mazzoni, Thierry Cutard. Microstructural design and study of fibre reinforced refractory concretes ECCM 14 -14th European Conference on Composite Materials, 8 p., Budapest, HU | [HAL] / [BIB] |
2010 | COM | Tchadja Kagnaya, Christine Boher, Laurence Lambert, Myriam Lazard, Thierry Cutard. Mécanismes d'endommagement tribologiques du WC-6% CO en usinage. Wear mechanisms of WC-6% CO by machining JIFT 2010 - Journées Internationales Francophones de Tribologie, p.355-360, Albi, FR | [HAL] / [BIB] |
2010 | ACL | Emmanuel de Bilbao, Eric Blond, Claire Michel, Thierry Cutard, N. Schmitt, J. Poirier. A new method to determine the Young's modulus of refractory materials Interceram, 59(1), p.34-38 | [HAL] / [BIB] |
2010 | ACL | Thierry Cutard, Nicolas Donval, Aurélien Mazzoni, Claire Michel, Fabien Nazaret. Thermomechanical characterization of monolithic refractory castables Advances in Science and Technology, Trans Tech Publications, 70, p.37-46 | [HAL] / [BIB] / [DOI] |
2010 | ACL | Fabien Nazaret, Thierry Cutard, Olivier Barrau. Sizing of refractory castable gas-burner using thermomechanical simulations Advances in Science and Technology, Trans Tech Publications, 70, p.173-178 | [HAL] / [BIB] |
2010 | COM | Aurélien Mazzoni, F. Nazaret, Thierry Cutard. Comportement thermomécanique de bétons réfractaires renforcés de fibres Matériaux 2010 , Nantes, FRANCE , 18-22 octobre 2010, Nantes, FR | [HAL] / [BIB] |
2010 | COM | Gérard Bernhart, Thierry Cutard. Ceramic die technology for superplastic forming : state of the art and recent improvements International symposium on superplasticity and its related areas, p.76-85, Hitachi, JP | [HAL] / [BIB] |
2010 | COM | Aurélien Mazzoni, Gérard Bernhart, Thierry Cutard. Ceramic Fibre Reinforced Refractory Castables for Very High Temperature Superplastic forming EuroSPF2010, 8th European Conference on Superplastic Forming, San Sebastian (Spain), San Sebastian, ES | [HAL] / [BIB] |
2010 | COM | C. Michel, Thierry Cutard, C. His, T. Champion. Microstructure et comportement mécanique à haute température de réfractaires à base de SiC et à liaison nitrure Matériaux 2010 , Nantes, FRANCE , 18-22 octobre 2010, Nantes, FR | [HAL] / [BIB] |
2009 | COM | F. Nazaret, O. Barrau, Thierry Cutard. Damage modelling in a fiber reinforced refractory castable. UNITECR 2009 - 11th Biennial Worldwide Conference on Unified International Technical Conference Refractories, 1, p.489-492, Bahia, BR | [HAL] / [BIB] |
2009 | INV | F. Nazaret, O. Barrau, Gérard Bernhart, Thierry Cutard. Innovative SPF toolings based on reinforced refractory concretes ICSAM2009 – International Conference on Superplasticity in Advanced Materials (Seattle), Seattle, US | [HAL] / [BIB] |
2009 | COM | Claire Michel, Thierry Cutard, Pascal Lamesle. Microstructure and thermomechanical behaviour of a SiC-based refractory ECERS -11th International conference and exhibition of the European Ceramic Society, p.779-784, Krakow, PL | [HAL] / [BIB] |
2009 | ACL | Tchadja Kagnaya, Christine Boher, L. Lambert, M. Lazard, Thierry Cutard. Wear mechanisms of WC-Co cutting tools from high-speed tribological tests Wear, Elsevier, 267(5-8, 2, SI), p.890-897 | [HAL] / [BIB] / [DOI] |
2009 | P | N. Donval, Aurélien Mazzoni, Thierry Cutard. Development and thermomechanical behavior of fiber reinforced refractory concretes. apanese-French Joint Workhop (EMAC-Tohoku University-INSA), Tohoku University (Japan), December 2009., Tohoku University, JP | [HAL] / [BIB] |
2009 | ACL | Frédéric Deschaux-Beaume, Nicole Fréty, Thierry Cutard, Christophe Colin. Oxidation modeling of a Si3N4-TiN composite : Comparison between experiment and kinetic models Ceramics International, Elsevier, 35, p.1709-1718 | [HAL] / [BIB] / [DOI] |
2009 | ACL | M. Tata, D. Miroud, S. Lebaili, Thierry Cutard. The study of properties of WC-based and W-based composites fabricated by infiltration with liquid Cu-Mn binder Asian Journal of Scientific Research, 2(2), p.76-86 | [HAL] / [BIB] / [DOI] |
2009 | ACL | Tchadja Kagnaya, Christine Boher, Laurence Lambert, Myriam Lazard, Thierry Cutard. Friction at high sliding speed of WC-6Co pin versus steel disc AISI 1045 : estimation of the contact temperature The international journal of multiphysics., Multi-Science Publishing, 3(2), p..141-153 | [HAL] / [BIB] / [DOI] |
2008 | COM | Fabien Nazaret, Thierry Cutard. Modélisation de l'endommagement dans un béton réfractaire renforcé de fibres métalliques Journées spécialisées réfractaires, p.116-119, Lunéville, FR | [HAL] / [BIB] |
2008 | COM | Aurélien Mazzoni, Thierry Cutard. Comportement thermomécanique de bétons réfractaires : effet du renforcement par des fibres minérales Journées spécialisées réfractaires, p.79-82, Lunéville, FR | [HAL] / [BIB] |
2008 | COM | Christian Gault, Thierry Cutard, Jacques Poirier, Alain Gasser, Nicolas Schmitt, Jérôme Soudier, Yann Laborel, Christian His, Jean Michel Brossard. Le programme DRuIDe : présentation et premiers résultats Journées spécialisées réfractaires, p.13-16, Lunéville, FR | [HAL] / [BIB] |
2008 | COM | Vincent Velay, Thierry Cutard, N. Guegan. Thermal behaviour modelling of superplastic forming tools EuroSPF08 - 6th EUROSPF Conference, p. 1-9, Carcassonne, FR | [HAL] / [BIB] |
2008 | COM | Gérard Bernhart, Thierry Cutard, Yannick Le Maoult, Fabrice Schmidt, Jean Paul Arcens. Infra-red sheet heating assisted Superplastic Forming EuroSPF2008 - 6th European Conference on Superplastic Forming, Carcassonne, FR | [HAL] / [BIB] |
2008 | COM | Aurélien Mazzoni, Thierry Cutard, Fabien Nazaret. Thermomechanical behaviour of refractory concretes : effect of a mineral fibre reinforcement ICC2 -2nd International Congress on Ceramics : a global roadmap, 7 p., Verona, IT | [HAL] / [BIB] |
2008 | ACL | Gérard Bernhart, F. Nazaret, Thierry Cutard. Fiber reinforced refractory castables for SPF toolings Materials Science and Engineering Technology / Materialwissenschaft und Werkstofftechnik, Wiley-VCH Verlag, 39(4-5), p.317-321 | [HAL] / [BIB] / [DOI] |
2007 | COM | Tchadja Kagnaya, Christine Boher, Laurence Lambert, Myriam Lazard, Thierry Cutard. Wear mechanism of WC-Co cutting tool from turning experiments and high speed tribological tests HSIMP 2007 -High Speed Industrial Manufacturing Processes, 8 p., Senlis, FR | [HAL] / [BIB] |
2007 | COM | Mohsen Roosefid, Evariste Ouedraogo, Hicham Marzagui, Thierry Cutard, Nicolas Prompt, Cyrille Deteuf. Modélisation de l'endommagement d'un béton réfractaire dans une structure modèle constituée d'un disque de béton muni d'un ancrage métallique CFM 2007 - 18ème Congrès Français de Mécanique, Grenoble, FR | [HAL] / [BIB] |
2007 | ACL | Laurent Robert, Fabien Nazaret, Thierry Cutard, Jean-José Orteu. Use of 3-D Digital Image Correlation to characterize the mechanical behavior of a Fiber Reinforced Refractory Castable Experimental Mechanics, Society for Experimental Mechanics, 47, p.761-773 | [HAL] / [BIB] / [DOI] |
2007 | ACL | Jean-José Orteu, Thierry Cutard, David Garcia, Emmanuel Cailleux, Laurent Robert. Application of stereovision to the mechanical characterisation of ceramic refractories reinforced with metallic fibres Strain, Wiley-Blackwell, 43(2), p.96-108 | [HAL] / [BIB] / [DOI] |
2007 | ACL | Frédéric Deschaux-Beaume, Nicole Fréty, Thierry Cutard, Christophe Colin. Oxidation modelling of a Si3N4–TiN ceramic: microstructure and kinetic laws Ceramics International, Elsevier, 33(7), p.1331-1339 | [HAL] / [BIB] / [DOI] |
2006 | COM | Thierry Cutard, Hicham Marzagui, E. Yeugo Fogaing, M. Huger, Christian Gault, Mohsen Roosefid, Evariste Ouedraogo, Nicolas Prompt, Cyrille Deteuf. Comportement thermomécanique de deux bétons réfractaires jusqu'à 1200°C : caractérisations et liens avec les évolutions microstructurales Matériaux 2006, 12 p., Dijon, FR | [HAL] / [BIB] |
2006 | COM | Gérard Bernhart, F. Nazaret, Thierry Cutard. Fibre reinforced refractory castables : an alternative solution for SPF die manufacturing ICSAM 2006 - 9th International conference on superplasticity in advanced materials, 551-552, p.37-42, Chengdu, CN | [HAL] / [BIB] / [DOI] |
2006 | ACL | F Nazaret, H Marzagui, Thierry Cutard. Influence of the mechanical behaviour specificities of damaged refractory castables on the Young's modulus determination Journal of the European Ceramic Society, Elsevier, 26(8), p.1429-1438 | [HAL] / [BIB] / [DOI] |
2005 | COM | Mohsen Roosefid, Evariste Ouedraogo, Hicham Marzagui, Thierry Cutard, Nicolas Prompt, Cyrille Deteuf. Thermomechanical behaviour of two refractory castables UNITECR'05 -Unified international technical conference on refractories, p.1003-1007, Orlando, US | [HAL] / [BIB] |
2005 | COM | Laurent Robert, Fabien Nazaret, Hicham Marzagui, Thierry Cutard, Jean-José Orteu. Etude du comportement endommageable de bétons réfractaires par stéréo-corrélation d'images numériques 17e Congrès Français de Mécanique, Troyes, FR | [HAL] / [BIB] |
2005 | ACL | Emmanuel Cailleux, Thierry Cutard, Gérard Bernhart. Pullout of steel fibres from a refractory castable: experiment and modelling Mechanics of Materials, Elsevier, 37(4), p.427-445 | [HAL] / [BIB] / [DOI] |
2005 | ACL | Emmanuel Cailleux, Thierry Cutard, Gérard Bernhart. Study of a ceramic refractory reinforced with metallic fibres: from the microstructure to the mechanical behaviour Industrial Ceramics, Ceramurgica, 25(1), p.21-26 | [HAL] / [BIB] |
2004 | ACL | H Marzagui, Thierry Cutard. Characterisation of microstructural evolutions in refractory castables by in situ high temperature ESEM Journal of Materials Processing Technology, Elsevier, 155(2, SI), p.1474-1481 | [HAL] / [BIB] / [DOI] |
2004 | COM | Fabien Nazaret, Thierry Cutard, Gérard Bernhart. Thermomechanical behaviour of a fibre-reinforced refractory concrete : tests and fe analysis 6th RILEM symposium on fibre-reinforced concretes (FRC) -BEFIB 2004, 1, p.689-698, Varenna, IT | [HAL] / [BIB] |
2004 | COM | H Marzagui, Thierry Cutard, Ey Fogaing, M Huger, C Gault, N Prompt, C Deteuf. Microstructural changes and high temperature mechanical behavior of an andalusite based low cement refractory castable 4th International symposium on advances in refractories for the metallurgical industries, p.331-345, Hamilton, Ontario, CA | [HAL] / [BIB] |
2004 | COM | H Marzagui, Thierry Cutard, M Roosefid, E Ouedraogo, N Prompt, C Deteuf. Room temperature mechanical behavior of two refractory castables 4th International symposium on advances in refractories for the metallurgical industries, p.645-659, Hamilton, Ontario, CA | [HAL] / [BIB] |
2004 | COM | Gérard Bernhart, Thierry Cutard, Philippe Lours. Preface of the proceedings of Euro SPF 2004 : 3rd european conference on super plastic forming Euro-SPF 2004 -3rd European conference on superplastic forming, 1 p., Albi, FR | [HAL] / [BIB] |
2004 | COM | Fabien Nazaret, Thierry Cutard, Gérard Bernhart. Mechanical behavior of ceramic materials for SPF toolings Euro-SPF 2004 -3rd European conference on superplastic forming, p.139-144, Albi, FR | [HAL] / [BIB] |
2004 | ACL | Egle Conforto, D Mari, Thierry Cutard. The role of molybdenum in the hard-phase grains of (Ti, Mo)(C, N)-Co cermets Philosophical Magazine, Taylor & Francis: STM, Behavioural Science and Public Health Titles, 84(17), p.1717-1733 | [HAL] / [BIB] / [DOI] |
2004 | COM | Fabien Nazaret, Thierry Cutard, Gérard Bernhart. Influence des fibres métalliques dans le comportement mécanique à haute température d'un béton réfractaire renforcé MECAMAT 2004, p.445-448, Aussois, FR | [HAL] / [BIB] |
2004 | COM | Thierry Cutard, Emmanuel Cailleux, F Nazaret, Gérard Bernhart. Metallic fiber reinforced refractory concretes 4th International symposium on advances in refractories for the metallurgical industries, p.293-307, Hamilton, Ontario, CA | [HAL] / [BIB] |
2004 | AP | Gérard Bernhart, Thierry Cutard, Philippe Lours. Euro SPF 2004 : third european conference on superplastic forming, Albi, France, from july 07-09, 2004 203 p. | [HAL] / [BIB] |
2003 | COM | Hicham Marzagui, Thierry Cutard. Characterisation of microstructural evolutions in refractory castables by in situ-high temperature ESEM AMPT 2003 -International conference on advances in materials and processing technologies, 2, p.1477-1480, Dublin, IE | [HAL] / [BIB] |
2003 | COM | Jean Blachere, Raphaëlle Peraldi, Daniel Monceau, Thierry Cutard, Bernard Pieraggi. Orientation relation between Ni and NiO and its evolution during oxide growth Electrochemical Society symposium on High-Temperature Corrosion and Materials Chemistry IV, 16, p.189-199, Paris, FR | [HAL] / [BIB] |
2003 | COM | Gérard Bernhart, F Nazaret, A Martinier, C Gao, D Garriga-Majo, Thierry Cutard, Philippe Lours. Design of SPF dies based on advanced material behaviour models 8th International Conference on Superplasticity in Advanced Materials, 447-448, p.123-130, Oxford, GB | [HAL] / [BIB] / [DOI] |
2003 | ACL | D. Mari, S. Bolognini, G. Feusier, Thierry Cutard, C. Verdon, T. Viatte, W. Benoit. TiMoCN based cermets . Part I. Morphology and phase composition International Journal of Refractory Metals and Hard Materials, Elsevier, 21(n°1-2), p.P.37-46 | [HAL] / [BIB] |
2003 | AP | Jean-Claude Nièpce, Jean-Marc Chaix, Eric Gaffet, Michel Baron, John A. Dodds, Alain de Ryck, Alain Chamayou, Ange Nzihou, Didier Lecomte, Philippe Lours, Thierry Cutard, Gérard Bernhart, Rene David, Christophe Levaillant. De la poudre au matériau massif : colloque. Commission poudres et matériaux frittés SF2M-GFC - Journées annuelles du RFM, Albi, France, du 03-05 juin 2003 381 p. | [HAL] / [BIB] |
2003 | ACL | D. Mari, S. Bolognini, G. Feusier, Thierry Cutard, T. Viatte, W. Benoit. TiMoCN based cermets. Part II. Microstructure and room temperature mechanical properties International Journal of Refractory Metals and Hard Materials, Elsevier, 21(n°1-2), p.47-53 | [HAL] / [BIB] |
2002 | COM | Emmanuel Cailleux, Thierry Cutard, Gérard Bernhart. Study of a ceramic refractory reinforced with metallic fibres : from the microstructure to the mechanical behaviour 3rd forum on new materials, 35, p.53-60, Florence, IT | [HAL] / [BIB] |
2002 | ACL | F Deschaux-Beaume, Thierry Cutard, N Frety, Christophe Levaillant. Oxidation of a silicon nitride-titanium nitride composite: Microstructural investigations and phenomenological modeling Journal of the American Ceramic Society, Wiley, 85(7), p.1860-1866 | [HAL] / [BIB] / [DOI] |
2002 | COM | Dorian Garcia, Jean-José Orteu, Thierry Cutard, Emmanuel Cailleux. Application of stereovision to the mechanical characterization of refractory ceramics reinforced with metallic fibers 2002 SEM annual conference and exposition on experimental and applied mechanics, 4p., Milwaukee, US | [HAL] / [BIB] |
2002 | ACL | Emmanuel Cailleux, Thierry Cutard, Gérard Bernhart. Pullout of metallic fibres from a ceramic refractory matrix Composites Part A: Applied Science and Manufacturing, Elsevier, 33(10), p.1461-1466 | [HAL] / [BIB] / [DOI] |
2001 | COM | Emmanuel Cailleux, Thierry Cutard, Gérard Bernhart. Pullout of metallic fibres in a ceramic refractory matrix Composites Part A: Applied Science and Manufacturing,IPCM7 - 7th international conference on interfacial phenomena in composite materials, Elsevier, 5 p., Arcachon, FR | [HAL] / [BIB] |
2001 | COM | Dorian Garcia, Bruno David, Jean-José Orteu, Thierry Cutard, Emmanuel Cailleux. Application de la stéréovision à l'étude du comportement de bétons réfractaires renforcés de fibres métalliques Photomécanique 2001, 8 p., Poitiers, FR | [HAL] / [BIB] |
2001 | COM | Frédéric Deschaux Beaume, Nicole Frety, Fabrice Schmidt, Thierry Cutard. L'approche probabiliste de la rupture en dimensionnement de structures fragiles : application à la conception d'outils de mise en forme en céramique MECAMAT, p.151-154, Aussois, FR | [HAL] / [BIB] |
2001 | ACL | Philippe Lours, Thierry Cutard, Gérard Bernhart, Christophe Levaillant. Performances of metallic and ceramic tools for superplastic forming International Journal of Materials and Product Technology, Inderscience, p.445-452 | [HAL] / [BIB] |
2000 | COM | F Deschaux-Beaume, N Frety, Thierry Cutard, C Colin. A phenomenological model for high temperature oxidation of Si3N4-TiN composites 5th International Symposium on High Temperature Corrosion and Protection of Materials, 369-372(1&2), p.403-410, Les Embiez, FR | [HAL] / [BIB] / [DOI] |
1999 | ACL | Frédéric Deschaux-Beaume, Fabrice Schmidt, Nicole Fréty, Thierry Cutard, Jean-Claude Boyer, Christophe Levaillant. Numerical simulation of failure prediction for ceramic tools: comparison with forging test results Journal of Materials Processing Technology, Elsevier, 92-93, p.502-507 | [HAL] / [BIB] / [DOI] |
1999 | ACL | Thierry Cutard, Emmanuel Cailleux, Philippe Lours, Gérard Bernhart. Structural and mechanical properties of a refractory concrete for superplastic forming tools Industrial Ceramics, Ceramurgica, 19(2), p.100-102 | [HAL] / [BIB] |
1998 | ACL | E. Carreno Morelli, Thierry Cutard, R. Schaller, C. Bonjour. Processing and characterization of aluminium-based MMCs produced by gas pressure infiltration Materials Science and Engineering: A, Elsevier, 251(n° 1-2), p. 48-57 | [HAL] / [BIB] / [DOI] |
1997 | ACL | Ml Bouchetou, Thierry Cutard, M Huger, C Gault. Elasticity of Si-C-O and C fibres at high temperature Scripta Materialia, Elsevier, 37(7), p.1005-1010 | [HAL] / [BIB] / [DOI] |
1997 | COM | Frédéric Deschaux-Beaume, Fabrice Schmidt, Nicole Fréty, Thierry Cutard, J.C. Boyer, Christophe Levaillant. Numerical Simulation of Failure Prediction for Ceramics Tools: Comparison with Forging Test Results Advances in Materials and Processing Technologies (AMPT) 1997, Guimarães, PT | [HAL] / [BIB] |
1997 | COM | Thierry Cutard, S. Bolognini, G. Feusier, C. Verdon, T. Viatte, W. Benoit. Microstructure and mechanical properties of Ti(C,N)-Mo2C-(Ni,Co) cermets as a function of their initial chemical composition ECERS V - 5th conference and exhibition of the European Ceramic Society, Vol. 132-136, p.747-750, Versailles, FR | [HAL] / [BIB] |
1996 | ACL | G. Feusier, Thierry Cutard, C. Verdon, T. Viatte, W. Benoit. High Temperature Properties of TiCN-Mo2C-Co Cermets Studied by Mechanical Spectroscopy Journal de Physique IV Proceedings, EDP Sciences, 06(C8), p.C8-751-C8-754 | [HAL] / [BIB] / [DOI] |
1996 | ACL | T. Viatte, Thierry Cutard, G. Feusier, W. Benoit. High Temperature Mechanical Properties of Ti(C, N)-Mo2C-Ni Cermets Studied by Internal Friction Measurements Journal de Physique IV Proceedings, EDP Sciences, 06(C8), p.C8-743-C8-746 | [HAL] / [BIB] / [DOI] |